| Message ID | 20230211031821.976408-2-cristian.ciocaltea@collabora.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Enable networking support for StarFive JH7100 SoC | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Guessing tree name failed - patch did not apply |
On 11/02/2023 04:18, Cristian Ciocaltea wrote: > Document the compatible for the SiFive Composable Cache Controller found > on the StarFive JH7100 SoC. > > This also requires extending the 'reg' property to handle distinct > ranges, as specified via 'reg-names'. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
Hey all, On Sat, Feb 11, 2023 at 05:18:10AM +0200, Cristian Ciocaltea wrote: > Document the compatible for the SiFive Composable Cache Controller found > on the StarFive JH7100 SoC. > > This also requires extending the 'reg' property to handle distinct > ranges, as specified via 'reg-names'. > > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> > --- > .../bindings/riscv/sifive,ccache0.yaml | 28 ++++++++++++++++++- > 1 file changed, 27 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml > index 31d20efaa6d3..2b864b2f12c9 100644 > --- a/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml > +++ b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml > @@ -25,6 +25,7 @@ select: > - sifive,ccache0 > - sifive,fu540-c000-ccache > - sifive,fu740-c000-ccache > + - starfive,jh7100-ccache > > required: > - compatible > @@ -37,6 +38,7 @@ properties: > - sifive,ccache0 > - sifive,fu540-c000-ccache > - sifive,fu740-c000-ccache > + - starfive,jh7100-ccache > - const: cache > - items: > - const: starfive,jh7110-ccache > @@ -70,7 +72,13 @@ properties: > - description: DirFail interrupt > > reg: > - maxItems: 1 > + minItems: 1 > + maxItems: 2 > + > + reg-names: > + items: > + - const: control > + - const: sideband So why is this called "sideband"? In the docs for the JH7100 it is called LIM & it's called LIM in our docs for the PolarFire SoC (at the same address btw) and we run the HSS out of it! LIM being "loosely integrated memory", which by the limit hits on Google may be a SiFive-ism? I'm not really sure if adding it as a "reg" section is the right thing to do as it's not "just" a register bank. Perhaps Rob/Krzysztof have a take on that one? > > next-level-cache: true > > @@ -89,6 +97,7 @@ allOf: > contains: > enum: > - sifive,fu740-c000-ccache > + - starfive,jh7100-ccache > - starfive,jh7110-ccache > - microchip,mpfs-ccache > > @@ -106,12 +115,29 @@ allOf: > Must contain entries for DirError, DataError and DataFail signals. > maxItems: 3 > > + - if: > + properties: > + compatible: > + contains: > + const: starfive,jh7100-ccache > + > + then: > + properties: > + reg: > + maxItems: 2 > + > + else: > + properties: > + reg: > + maxItems: 1 > + > - if: > properties: > compatible: > contains: > enum: > - sifive,fu740-c000-ccache > + - starfive,jh7100-ccache > - starfive,jh7110-ccache > > then: > -- > 2.39.1 >
On Tue, 14 Feb 2023 at 21:42, Conor Dooley <conor@kernel.org> wrote: > > Hey all, > > On Sat, Feb 11, 2023 at 05:18:10AM +0200, Cristian Ciocaltea wrote: > > Document the compatible for the SiFive Composable Cache Controller found > > on the StarFive JH7100 SoC. > > > > This also requires extending the 'reg' property to handle distinct > > ranges, as specified via 'reg-names'. > > > > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> > > --- > > .../bindings/riscv/sifive,ccache0.yaml | 28 ++++++++++++++++++- > > 1 file changed, 27 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml > > index 31d20efaa6d3..2b864b2f12c9 100644 > > --- a/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml > > +++ b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml > > @@ -25,6 +25,7 @@ select: > > - sifive,ccache0 > > - sifive,fu540-c000-ccache > > - sifive,fu740-c000-ccache > > + - starfive,jh7100-ccache > > > > required: > > - compatible > > @@ -37,6 +38,7 @@ properties: > > - sifive,ccache0 > > - sifive,fu540-c000-ccache > > - sifive,fu740-c000-ccache > > + - starfive,jh7100-ccache > > - const: cache > > - items: > > - const: starfive,jh7110-ccache > > @@ -70,7 +72,13 @@ properties: > > - description: DirFail interrupt > > > > reg: > > - maxItems: 1 > > + minItems: 1 > > + maxItems: 2 > > + > > + reg-names: > > + items: > > + - const: control > > + - const: sideband > > So why is this called "sideband"? > In the docs for the JH7100 it is called LIM & it's called LIM in our > docs for the PolarFire SoC (at the same address btw) and we run the HSS > out of it! LIM being "loosely integrated memory", which by the limit > hits on Google may be a SiFive-ism? > > I'm not really sure if adding it as a "reg" section is the right thing > to do as it's not "just" a register bank. > Perhaps Rob/Krzysztof have a take on that one? Yes, this seems to be a leftover I didn't manage to clean up yet. The "sideband" range is called L2 LIM in the datasheet and seems to be a way to use the cache directly. The Sifive docs read "When cache ways are disabled, they are addressable in the L2 Loosely-Integrated Memory (L2 LIM) address space [..]". This feature is not used by Linux on the JH7100, so can just be removed here. /Emil > > > > next-level-cache: true > > > > @@ -89,6 +97,7 @@ allOf: > > contains: > > enum: > > - sifive,fu740-c000-ccache > > + - starfive,jh7100-ccache > > - starfive,jh7110-ccache > > - microchip,mpfs-ccache > > > > @@ -106,12 +115,29 @@ allOf: > > Must contain entries for DirError, DataError and DataFail signals. > > maxItems: 3 > > > > + - if: > > + properties: > > + compatible: > > + contains: > > + const: starfive,jh7100-ccache > > + > > + then: > > + properties: > > + reg: > > + maxItems: 2 > > + > > + else: > > + properties: > > + reg: > > + maxItems: 1 > > + > > - if: > > properties: > > compatible: > > contains: > > enum: > > - sifive,fu740-c000-ccache > > + - starfive,jh7100-ccache > > - starfive,jh7110-ccache > > > > then: > > -- > > 2.39.1 > > > _______________________________________________ > linux-riscv mailing list > linux-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-riscv
On Tue, 14 Feb 2023 12:40:35 PST (-0800), Conor Dooley wrote: > Hey all, > > On Sat, Feb 11, 2023 at 05:18:10AM +0200, Cristian Ciocaltea wrote: >> Document the compatible for the SiFive Composable Cache Controller found >> on the StarFive JH7100 SoC. >> >> This also requires extending the 'reg' property to handle distinct >> ranges, as specified via 'reg-names'. >> >> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> >> --- >> .../bindings/riscv/sifive,ccache0.yaml | 28 ++++++++++++++++++- >> 1 file changed, 27 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml >> index 31d20efaa6d3..2b864b2f12c9 100644 >> --- a/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml >> +++ b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml >> @@ -25,6 +25,7 @@ select: >> - sifive,ccache0 >> - sifive,fu540-c000-ccache >> - sifive,fu740-c000-ccache >> + - starfive,jh7100-ccache >> >> required: >> - compatible >> @@ -37,6 +38,7 @@ properties: >> - sifive,ccache0 >> - sifive,fu540-c000-ccache >> - sifive,fu740-c000-ccache >> + - starfive,jh7100-ccache >> - const: cache >> - items: >> - const: starfive,jh7110-ccache >> @@ -70,7 +72,13 @@ properties: >> - description: DirFail interrupt >> >> reg: >> - maxItems: 1 >> + minItems: 1 >> + maxItems: 2 >> + >> + reg-names: >> + items: >> + - const: control >> + - const: sideband > > So why is this called "sideband"? > In the docs for the JH7100 it is called LIM & it's called LIM in our > docs for the PolarFire SoC (at the same address btw) and we run the HSS IIRC it's both: "LIM" is the memory, "sideband" is the port. I can't find any proper documentation of "sideband" outside of DT and errata, but there's a hanful of references to it in the bootloader for the fu540: <https://github.com/sifive/freedom-u540-c000-bootloader/search?q=sideband>. It's not really clear which is more correct here: sideband accesses are only useful when the cache is configured as an LIM, at least for general software. IIRC the accesses to the LIM only go through the sideband port for the E core, but I might be wrong about that. > out of it! LIM being "loosely integrated memory", which by the limit > hits on Google may be a SiFive-ism? Yep: TIM is the SiFive version of Arm's TCM (tightly coupled memory), and LIM is the flavor that's farther away (L2 instead of L1). > I'm not really sure if adding it as a "reg" section is the right thing > to do as it's not "just" a register bank. > Perhaps Rob/Krzysztof have a take on that one? > >> >> next-level-cache: true >> >> @@ -89,6 +97,7 @@ allOf: >> contains: >> enum: >> - sifive,fu740-c000-ccache >> + - starfive,jh7100-ccache >> - starfive,jh7110-ccache >> - microchip,mpfs-ccache >> >> @@ -106,12 +115,29 @@ allOf: >> Must contain entries for DirError, DataError and DataFail signals. >> maxItems: 3 >> >> + - if: >> + properties: >> + compatible: >> + contains: >> + const: starfive,jh7100-ccache >> + >> + then: >> + properties: >> + reg: >> + maxItems: 2 >> + >> + else: >> + properties: >> + reg: >> + maxItems: 1 >> + >> - if: >> properties: >> compatible: >> contains: >> enum: >> - sifive,fu740-c000-ccache >> + - starfive,jh7100-ccache >> - starfive,jh7110-ccache >> >> then: >> -- >> 2.39.1 >>
diff --git a/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml index 31d20efaa6d3..2b864b2f12c9 100644 --- a/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml +++ b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml @@ -25,6 +25,7 @@ select: - sifive,ccache0 - sifive,fu540-c000-ccache - sifive,fu740-c000-ccache + - starfive,jh7100-ccache required: - compatible @@ -37,6 +38,7 @@ properties: - sifive,ccache0 - sifive,fu540-c000-ccache - sifive,fu740-c000-ccache + - starfive,jh7100-ccache - const: cache - items: - const: starfive,jh7110-ccache @@ -70,7 +72,13 @@ properties: - description: DirFail interrupt reg: - maxItems: 1 + minItems: 1 + maxItems: 2 + + reg-names: + items: + - const: control + - const: sideband next-level-cache: true @@ -89,6 +97,7 @@ allOf: contains: enum: - sifive,fu740-c000-ccache + - starfive,jh7100-ccache - starfive,jh7110-ccache - microchip,mpfs-ccache @@ -106,12 +115,29 @@ allOf: Must contain entries for DirError, DataError and DataFail signals. maxItems: 3 + - if: + properties: + compatible: + contains: + const: starfive,jh7100-ccache + + then: + properties: + reg: + maxItems: 2 + + else: + properties: + reg: + maxItems: 1 + - if: properties: compatible: contains: enum: - sifive,fu740-c000-ccache + - starfive,jh7100-ccache - starfive,jh7110-ccache then:
Document the compatible for the SiFive Composable Cache Controller found on the StarFive JH7100 SoC. This also requires extending the 'reg' property to handle distinct ranges, as specified via 'reg-names'. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> --- .../bindings/riscv/sifive,ccache0.yaml | 28 ++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-)