| Message ID | 20230320081133.23655-5-chiawei_wang@aspeedtech.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm: aspeed: Add UART DMA support | expand |
> From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> > Sent: Monday, March 20, 2023 5:43 PM > > On Mon, 20 Mar 2023, Chia-Wei Wang wrote: > > > Add new UART driver with DMA support for Aspeed AST2600 SoCs. > > The drivers mainly prepare the dma instance based on the 8250_dma > > implementation to leverage the AST2600 UART DMA (UDMA) engine. > > > > Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> > > --- > > drivers/tty/serial/8250/8250_aspeed.c | 224 > ++++++++++++++++++++++++++ > > drivers/tty/serial/8250/Kconfig | 8 + > > drivers/tty/serial/8250/Makefile | 1 + > > 3 files changed, 233 insertions(+) > > create mode 100644 drivers/tty/serial/8250/8250_aspeed.c > > > > diff --git a/drivers/tty/serial/8250/8250_aspeed.c > > b/drivers/tty/serial/8250/8250_aspeed.c > > new file mode 100644 > > index 000000000000..04d0bf6fba28 > > --- /dev/null > > +++ b/drivers/tty/serial/8250/8250_aspeed.c > > @@ -0,0 +1,224 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (C) ASPEED Technology Inc. > > + */ > > +#include <linux/device.h> > > +#include <linux/io.h> > > +#include <linux/module.h> > > +#include <linux/serial_8250.h> > > +#include <linux/serial_reg.h> > > +#include <linux/of.h> > > +#include <linux/of_irq.h> > > +#include <linux/of_platform.h> > > +#include <linux/platform_device.h> > > +#include <linux/clk.h> > > +#include <linux/reset.h> > > +#include <linux/dma-mapping.h> > > +#include <linux/circ_buf.h> > > +#include <linux/tty_flip.h> > > +#include <linux/pm_runtime.h> > > + > > +#include "8250.h" > > + > > +#define DEVICE_NAME "aspeed-uart" > > + > > +struct ast8250_data { > > + int line; > > + int irq; > > + u8 __iomem *regs; > > + struct reset_control *rst; > > + struct clk *clk; > > +#ifdef CONFIG_SERIAL_8250_DMA > > + struct uart_8250_dma dma; > > +#endif > > +}; > > + > > +#ifdef CONFIG_SERIAL_8250_DMA > > +static int ast8250_rx_dma(struct uart_8250_port *p); > > + > > +static void ast8250_rx_dma_complete(void *param) { > > + struct uart_8250_port *p = param; > > + struct uart_8250_dma *dma = p->dma; > > + struct tty_port *tty_port = &p->port.state->port; > > + struct dma_tx_state state; > > + int count; > > + > > + dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); > > + > > + count = dma->rx_size - state.residue; > > + > > + tty_insert_flip_string(tty_port, dma->rx_buf, count); > > + p->port.icount.rx += count; > > + > > + tty_flip_buffer_push(tty_port); > > + > > + ast8250_rx_dma(p); > > +} > > + > > +static int ast8250_rx_dma(struct uart_8250_port *p) { > > + struct uart_8250_dma *dma = p->dma; > > + struct dma_async_tx_descriptor *tx; > > + > > + tx = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr, > > + dma->rx_size, DMA_DEV_TO_MEM, > > + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); > > + if (!tx) > > + return -EBUSY; > > How does the DMA Rx "loop" restart when this is taken? The loop re-starts from ast8250_startup. > > > + tx->callback = ast8250_rx_dma_complete; > > + tx->callback_param = p; > > + > > + dma->rx_cookie = dmaengine_submit(tx); > > + > > + dma_async_issue_pending(dma->rxchan); > > + > > + return 0; > > +} > > +#endif > > These 2 functions look very similar to what 8250_dma offers for you. The only > difference I could see is that always start DMA Rx thing which could be > handled by adding some capability flag into uart_8250_dma for those UARTs > that can launch DMA Rx while Rx queue is empty. > > So, just use the standard 8250_dma functions and make the small capabilities > flag tweak there. > > By using the stock functions you also avoid 8250_dma Rx and your DMA Rx > racing like they currently would (8250_port assigns the functions from > 8250_dma when you don't specify the rx handler and the default 8250 irq > handler will call into those standard 8250 DMA functions). Yes for the difference described. Our customers usually use UDMA for file-transmissions over UART. And I found the preceding bytes will get lost easily due to the late start of DMA engine. In fact, I was seeking the default implementation to always start RX DMA instead of enabling it upon DR bit rising. But no luck and thus add ast8250_rx_dma. (The default 8250 ISR also called into up->dma->rx_dma) If adding a new capability flag is the better way to go, I will try to implement in that way for further review. > > > I'm curious about this HW and how it behaves under these two scenarios: > - When Rx is empty, does UART/DMA just sit there waiting forever? Yes. > - When a stream of incoming Rx characters suddenly ends, how does > UART/DMA > react? ...On 8250 UARTs I'm familiar with this triggers UART_IIR_TIMEOUT > which you don't seem to handle. UDMA also has a timeout control. If the data suddenly ends and timeout occurs, UDMA will trigger an interrupt. UDMA ISR then check if there is data available using DMA read/write pointers and invokes callback if any. > > When you provide answer to those two questions, I can try to help you further > on how to integrate into the standard 8250 DMA code. Thanks! It would be great using the default one to avoid mostly duplicated code. > > > +static int ast8250_handle_irq(struct uart_port *port) { > > + return serial8250_handle_irq(port, serial_port_in(port, UART_IIR)); > > +} > > + > > +static int ast8250_startup(struct uart_port *port) { #ifdef > > +CONFIG_SERIAL_8250_DMA > > This ifdef'fery is entirely unnecessary. Will remove as suggested. > > > + int rc; > > + struct uart_8250_port *up = up_to_u8250p(port); > > Reverse xmas tree order. Will revise as suggested. > > > + > > + rc = serial8250_do_startup(port); > > + if (rc) > > + return rc; > > + > > + /* > > + * The default RX DMA is launched upon rising DR bit. > > + * > > + * However, this can result in byte lost if UART FIFO has > > + * been overruned before the DMA engine gets prepared and > > + * read the data out. This is especially common when UART > > + * DMA is used for file transfer. Thus we initiate RX DMA > > + * as early as possible. > > + */ > > + if (up->dma) > > + return ast8250_rx_dma(up); > > Once you start using the general 8250 dma code and add the DMA Rx always > capabilities flag, this can go into serial8250_do_startup(). Since > serial8250_rx_dma() always exists independent of CONFIG_SERIAL_8250_DMA, > no include guards are necessary. > > ...After which you probably don't need this whole function anymore. Agree. > > > + > > + return 0; > > +#else > > + return serial8250_do_startup(port); > > +#endif > > +} > > + > > +static void ast8250_shutdown(struct uart_port *port) { > > + return serial8250_do_shutdown(port); } > > + > > +static int ast8250_probe(struct platform_device *pdev) { > > + int rc; > > Put this as last. Will revise as suggested. > > > + struct uart_8250_port uart = {}; > > + struct uart_port *port = &uart.port; > > + struct device *dev = &pdev->dev; > > + struct ast8250_data *data; > > + struct resource *res; > > + > > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); > > + if (!data) > > + return -ENOMEM; > > + > > + data->irq = platform_get_irq(pdev, 0); > > + if (data->irq < 0) > > + return data->irq; > > + > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + if (res == NULL) { > > + dev_err(dev, "failed to get register base\n"); > > + return -ENODEV; > > + } > > + > > + data->regs = devm_ioremap(dev, res->start, resource_size(res)); > > + if (IS_ERR(data->regs)) { > > + dev_err(dev, "failed to map registers\n"); > > + return PTR_ERR(data->regs); > > + } > > + > > + data->clk = devm_clk_get(dev, NULL); > > + if (IS_ERR(data->clk)) { > > + dev_err(dev, "failed to get clocks\n"); > > + return -ENODEV; > > + } > > + > > + rc = clk_prepare_enable(data->clk); > > + if (rc) { > > + dev_err(dev, "failed to enable clock\n"); > > + return rc; > > + } > > + > > + data->rst = devm_reset_control_get_optional_exclusive(dev, NULL); > > + if (!IS_ERR(data->rst)) > > + reset_control_deassert(data->rst); > > + > > + spin_lock_init(&port->lock); > > + port->dev = dev; > > + port->type = PORT_16550A; > > + port->irq = data->irq; > > + port->line = of_alias_get_id(dev->of_node, "serial"); > > + port->handle_irq = ast8250_handle_irq; > > + port->mapbase = res->start; > > + port->mapsize = resource_size(res); > > + port->membase = data->regs; > > + port->uartclk = clk_get_rate(data->clk); > > + port->regshift = 2; > > + port->iotype = UPIO_MEM32; > > + port->flags = UPF_FIXED_TYPE | UPF_FIXED_PORT | UPF_SHARE_IRQ; > > + port->startup = ast8250_startup; > > + port->shutdown = ast8250_shutdown; > > + port->private_data = data; > > > +#ifdef CONFIG_SERIAL_8250_DMA > > + data->dma.rxconf.src_maxburst = UART_XMIT_SIZE; > > + data->dma.txconf.dst_maxburst = UART_XMIT_SIZE; > > + uart.dma = &data->dma; > > +#endif > > Add a setup function for this and make an empty function with the same name > when CONFIG_SERIAL_8250_DMA is not there. Will revise as suggested. > > > + > > + data->line = serial8250_register_8250_port(&uart); > > + if (data->line < 0) { > > + dev_err(dev, "failed to register 8250 port\n"); > > + return data->line; > > + } > > + > > + platform_set_drvdata(pdev, data); > > + > > + return 0; > > +} > > + > > +static int ast8250_remove(struct platform_device *pdev) { > > + struct ast8250_data *data = platform_get_drvdata(pdev); > > + > > + serial8250_unregister_port(data->line); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id ast8250_of_match[] = { > > + { .compatible = "aspeed,ast2600-uart" }, > > + { }, > > +}; > > + > > +static struct platform_driver ast8250_platform_driver = { > > + .driver = { > > + .name = DEVICE_NAME, > > + .of_match_table = ast8250_of_match, > > + }, > > + .probe = ast8250_probe, > > + .remove = ast8250_remove, > > +}; > > + > > +module_platform_driver(ast8250_platform_driver); > > + Thanks, Chiawei
> From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> > Sent: Monday, March 20, 2023 6:49 PM > > On Mon, 20 Mar 2023, ChiaWei Wang wrote: > > > > From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> > > > Sent: Monday, March 20, 2023 5:43 PM > > > > > > On Mon, 20 Mar 2023, Chia-Wei Wang wrote: > > > > > > > Add new UART driver with DMA support for Aspeed AST2600 SoCs. > > > > The drivers mainly prepare the dma instance based on the 8250_dma > > > > implementation to leverage the AST2600 UART DMA (UDMA) engine. > > > > > > > > Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> > > > > --- > > > > drivers/tty/serial/8250/8250_aspeed.c | 224 > > > ++++++++++++++++++++++++++ > > > > drivers/tty/serial/8250/Kconfig | 8 + > > > > drivers/tty/serial/8250/Makefile | 1 + > > > > 3 files changed, 233 insertions(+) create mode 100644 > > > > drivers/tty/serial/8250/8250_aspeed.c > > > > > > > > diff --git a/drivers/tty/serial/8250/8250_aspeed.c > > > > b/drivers/tty/serial/8250/8250_aspeed.c > > > > new file mode 100644 > > > > index 000000000000..04d0bf6fba28 > > > > --- /dev/null > > > > +++ b/drivers/tty/serial/8250/8250_aspeed.c > > > > @@ -0,0 +1,224 @@ > > > > +// SPDX-License-Identifier: GPL-2.0 > > > > +/* > > > > + * Copyright (C) ASPEED Technology Inc. > > > > + */ > > > > +#include <linux/device.h> > > > > +#include <linux/io.h> > > > > +#include <linux/module.h> > > > > +#include <linux/serial_8250.h> > > > > +#include <linux/serial_reg.h> > > > > +#include <linux/of.h> > > > > +#include <linux/of_irq.h> > > > > +#include <linux/of_platform.h> > > > > +#include <linux/platform_device.h> #include <linux/clk.h> > > > > +#include <linux/reset.h> #include <linux/dma-mapping.h> #include > > > > +<linux/circ_buf.h> #include <linux/tty_flip.h> #include > > > > +<linux/pm_runtime.h> > > > > + > > > > +#include "8250.h" > > > > + > > > > +#define DEVICE_NAME "aspeed-uart" > > > > + > > > > +struct ast8250_data { > > > > + int line; > > > > + int irq; > > > > + u8 __iomem *regs; > > > > + struct reset_control *rst; > > > > + struct clk *clk; > > > > +#ifdef CONFIG_SERIAL_8250_DMA > > > > + struct uart_8250_dma dma; > > > > +#endif > > > > +}; > > > > + > > > > +#ifdef CONFIG_SERIAL_8250_DMA > > > > +static int ast8250_rx_dma(struct uart_8250_port *p); > > > > + > > > > +static void ast8250_rx_dma_complete(void *param) { > > > > + struct uart_8250_port *p = param; > > > > + struct uart_8250_dma *dma = p->dma; > > > > + struct tty_port *tty_port = &p->port.state->port; > > > > + struct dma_tx_state state; > > > > + int count; > > > > + > > > > + dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); > > > > + > > > > + count = dma->rx_size - state.residue; > > > > + > > > > + tty_insert_flip_string(tty_port, dma->rx_buf, count); > > > > + p->port.icount.rx += count; > > > > + > > > > + tty_flip_buffer_push(tty_port); > > > > + > > > > + ast8250_rx_dma(p); > > > > +} > > > > + > > > > +static int ast8250_rx_dma(struct uart_8250_port *p) { > > > > + struct uart_8250_dma *dma = p->dma; > > > > + struct dma_async_tx_descriptor *tx; > > > > + > > > > + tx = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr, > > > > + dma->rx_size, DMA_DEV_TO_MEM, > > > > + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); > > > > + if (!tx) > > > > + return -EBUSY; > > > > > > How does the DMA Rx "loop" restart when this is taken? > > > > The loop re-starts from ast8250_startup. > > Why would startup get called again? Sorry for misleading, it relies on handle_rx_dma that restarts the loop If UDMA suddenly shutdown, RX data stays in UART FIFO and thus triggers an interrupt. The ISR call chain, serial8250_handle_irq -> handle_rx_dma, will restarts the UDMA loop. However, before UDMA is restarted, there is a window suffering the same overrun issue as mentioned before. I think make the default code support "RX DMA AO (Always On)" is certain to avoid producing more duplicated code with little customizations. > > > > > + tx->callback = ast8250_rx_dma_complete; > > > > + tx->callback_param = p; > > > > + > > > > + dma->rx_cookie = dmaengine_submit(tx); > > > > + > > > > + dma_async_issue_pending(dma->rxchan); > > > > + > > > > + return 0; > > > > +} > > > > +#endif > > > > > > These 2 functions look very similar to what 8250_dma offers for you. > > > The only difference I could see is that always start DMA Rx thing > > > which could be handled by adding some capability flag into > > > uart_8250_dma for those UARTs that can launch DMA Rx while Rx queue is > empty. > > > > > > So, just use the standard 8250_dma functions and make the small > > > capabilities flag tweak there. > > > > > > By using the stock functions you also avoid 8250_dma Rx and your DMA > > > Rx racing like they currently would (8250_port assigns the functions > > > from 8250_dma when you don't specify the rx handler and the default > > > 8250 irq handler will call into those standard 8250 DMA functions). > > > > Yes for the difference described. > > > > Our customers usually use UDMA for file-transmissions over UART. > > And I found the preceding bytes will get lost easily due to the late > > start of DMA engine. > > > > In fact, I was seeking the default implementation to always start RX > > DMA instead of enabling it upon DR bit rising. But no luck and thus > > add ast8250_rx_dma. (The default 8250 ISR also called into > > up->dma->rx_dma) > > > > If adding a new capability flag is the better way to go, I will try to > > implement in that way for further review. > > Yes it would be much better. > > Add unsigned int capabilities into uart_8250_dma and put the necessary > checks + code into general code. Don't add any #ifdef > CONFIG_SERIAL_8250_DMA into 8250_port.c nor 8250_dma.c. Instead, if you > feel a need for one, use the #ifdef ... #else ... #endif in 8250.h to provide an > empty static inline function for the #else case. > Got it. I will get the patch prepared for your review in v4 revision. > > > I'm curious about this HW and how it behaves under these two scenarios: > > > - When Rx is empty, does UART/DMA just sit there waiting forever? > > > > Yes. > > Okay. > > > > - When a stream of incoming Rx characters suddenly ends, how does > > > UART/DMA > > > react? ...On 8250 UARTs I'm familiar with this triggers > UART_IIR_TIMEOUT > > > which you don't seem to handle. > > > > UDMA also has a timeout control. > > If the data suddenly ends and timeout occurs, UDMA will trigger an > interrupt. > > UDMA ISR then check if there is data available using DMA read/write > > pointers and invokes callback if any. > > Okay. And the UART side won't trigger any interrupts? UART side still triggers interrupts. However, for RX data, UDMA keep polling DR bit and read the data out from UART FIFO. Thus when serial8250_handle_irq ISR checks IIR, it gets no interrupt pending as data has been taken. The ISR will return if no other events. > > > > When you provide answer to those two questions, I can try to help > > > you further on how to integrate into the standard 8250 DMA code. > > > > Thanks! > > It would be great using the default one to avoid mostly duplicated code. > > You need to take a look into handle_rx_dma() what to do there. Probably just > call to ->rx_dma() unconditionally to prevent UART interrupts from messing up > with DMA Rx. This restart for DMA Rx is just for backup if the DMA Rx "loop" > stopped due to an error. Yes. A new if-condition to support "RX DMA AO" should be needed. Thanks for the review and feedback. I will move on to v4 revision with default code modification. Regards, Chiawei
diff --git a/drivers/tty/serial/8250/8250_aspeed.c b/drivers/tty/serial/8250/8250_aspeed.c new file mode 100644 index 000000000000..04d0bf6fba28 --- /dev/null +++ b/drivers/tty/serial/8250/8250_aspeed.c @@ -0,0 +1,224 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) ASPEED Technology Inc. + */ +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/serial_8250.h> +#include <linux/serial_reg.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/reset.h> +#include <linux/dma-mapping.h> +#include <linux/circ_buf.h> +#include <linux/tty_flip.h> +#include <linux/pm_runtime.h> + +#include "8250.h" + +#define DEVICE_NAME "aspeed-uart" + +struct ast8250_data { + int line; + int irq; + u8 __iomem *regs; + struct reset_control *rst; + struct clk *clk; +#ifdef CONFIG_SERIAL_8250_DMA + struct uart_8250_dma dma; +#endif +}; + +#ifdef CONFIG_SERIAL_8250_DMA +static int ast8250_rx_dma(struct uart_8250_port *p); + +static void ast8250_rx_dma_complete(void *param) +{ + struct uart_8250_port *p = param; + struct uart_8250_dma *dma = p->dma; + struct tty_port *tty_port = &p->port.state->port; + struct dma_tx_state state; + int count; + + dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); + + count = dma->rx_size - state.residue; + + tty_insert_flip_string(tty_port, dma->rx_buf, count); + p->port.icount.rx += count; + + tty_flip_buffer_push(tty_port); + + ast8250_rx_dma(p); +} + +static int ast8250_rx_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + struct dma_async_tx_descriptor *tx; + + tx = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr, + dma->rx_size, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!tx) + return -EBUSY; + + tx->callback = ast8250_rx_dma_complete; + tx->callback_param = p; + + dma->rx_cookie = dmaengine_submit(tx); + + dma_async_issue_pending(dma->rxchan); + + return 0; +} +#endif + +static int ast8250_handle_irq(struct uart_port *port) +{ + return serial8250_handle_irq(port, serial_port_in(port, UART_IIR)); +} + +static int ast8250_startup(struct uart_port *port) +{ +#ifdef CONFIG_SERIAL_8250_DMA + int rc; + struct uart_8250_port *up = up_to_u8250p(port); + + rc = serial8250_do_startup(port); + if (rc) + return rc; + + /* + * The default RX DMA is launched upon rising DR bit. + * + * However, this can result in byte lost if UART FIFO has + * been overruned before the DMA engine gets prepared and + * read the data out. This is especially common when UART + * DMA is used for file transfer. Thus we initiate RX DMA + * as early as possible. + */ + if (up->dma) + return ast8250_rx_dma(up); + + return 0; +#else + return serial8250_do_startup(port); +#endif +} + +static void ast8250_shutdown(struct uart_port *port) +{ + return serial8250_do_shutdown(port); +} + +static int ast8250_probe(struct platform_device *pdev) +{ + int rc; + struct uart_8250_port uart = {}; + struct uart_port *port = &uart.port; + struct device *dev = &pdev->dev; + struct ast8250_data *data; + struct resource *res; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->irq = platform_get_irq(pdev, 0); + if (data->irq < 0) + return data->irq; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(dev, "failed to get register base\n"); + return -ENODEV; + } + + data->regs = devm_ioremap(dev, res->start, resource_size(res)); + if (IS_ERR(data->regs)) { + dev_err(dev, "failed to map registers\n"); + return PTR_ERR(data->regs); + } + + data->clk = devm_clk_get(dev, NULL); + if (IS_ERR(data->clk)) { + dev_err(dev, "failed to get clocks\n"); + return -ENODEV; + } + + rc = clk_prepare_enable(data->clk); + if (rc) { + dev_err(dev, "failed to enable clock\n"); + return rc; + } + + data->rst = devm_reset_control_get_optional_exclusive(dev, NULL); + if (!IS_ERR(data->rst)) + reset_control_deassert(data->rst); + + spin_lock_init(&port->lock); + port->dev = dev; + port->type = PORT_16550A; + port->irq = data->irq; + port->line = of_alias_get_id(dev->of_node, "serial"); + port->handle_irq = ast8250_handle_irq; + port->mapbase = res->start; + port->mapsize = resource_size(res); + port->membase = data->regs; + port->uartclk = clk_get_rate(data->clk); + port->regshift = 2; + port->iotype = UPIO_MEM32; + port->flags = UPF_FIXED_TYPE | UPF_FIXED_PORT | UPF_SHARE_IRQ; + port->startup = ast8250_startup; + port->shutdown = ast8250_shutdown; + port->private_data = data; +#ifdef CONFIG_SERIAL_8250_DMA + data->dma.rxconf.src_maxburst = UART_XMIT_SIZE; + data->dma.txconf.dst_maxburst = UART_XMIT_SIZE; + uart.dma = &data->dma; +#endif + + data->line = serial8250_register_8250_port(&uart); + if (data->line < 0) { + dev_err(dev, "failed to register 8250 port\n"); + return data->line; + } + + platform_set_drvdata(pdev, data); + + return 0; +} + +static int ast8250_remove(struct platform_device *pdev) +{ + struct ast8250_data *data = platform_get_drvdata(pdev); + + serial8250_unregister_port(data->line); + + return 0; +} + +static const struct of_device_id ast8250_of_match[] = { + { .compatible = "aspeed,ast2600-uart" }, + { }, +}; + +static struct platform_driver ast8250_platform_driver = { + .driver = { + .name = DEVICE_NAME, + .of_match_table = ast8250_of_match, + }, + .probe = ast8250_probe, + .remove = ast8250_remove, +}; + +module_platform_driver(ast8250_platform_driver); + +MODULE_AUTHOR("Chia-Wei Wang <chiawei_wang@aspeedtech.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Aspeed 8250 UART Driver with DMA support"); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 978dc196c29b..f8a2231816c4 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -253,6 +253,14 @@ config SERIAL_8250_ACCENT To compile this driver as a module, choose M here: the module will be called 8250_accent. +config SERIAL_8250_ASPEED + tristate "Aspeed UART" + depends on ARCH_ASPEED && SERIAL_8250 + help + If you have a system using an Aspeed AST26xx SoCs and wish to + make use of its 16550A-compatible UART devices with DMA support, + say Y to this option. If unsure, say N. + config SERIAL_8250_ASPEED_VUART tristate "Aspeed Virtual UART" depends on SERIAL_8250 diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index 4fc2fc1f41b6..7b959e652b67 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o obj-$(CONFIG_SERIAL_8250_ASPEED_VUART) += 8250_aspeed_vuart.o +obj-$(CONFIG_SERIAL_8250_ASPEED) += 8250_aspeed.o obj-$(CONFIG_SERIAL_8250_BCM2835AUX) += 8250_bcm2835aux.o obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o
Add new UART driver with DMA support for Aspeed AST2600 SoCs. The drivers mainly prepare the dma instance based on the 8250_dma implementation to leverage the AST2600 UART DMA (UDMA) engine. Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> --- drivers/tty/serial/8250/8250_aspeed.c | 224 ++++++++++++++++++++++++++ drivers/tty/serial/8250/Kconfig | 8 + drivers/tty/serial/8250/Makefile | 1 + 3 files changed, 233 insertions(+) create mode 100644 drivers/tty/serial/8250/8250_aspeed.c