@@ -36,7 +36,7 @@ properties:
clock-controller:
# Child node
type: object
- $ref: "../clock/canaan,k210-clk.yaml"
+ $ref: ../clock/canaan,k210-clk.yaml
description:
Clock controller for the SoC clocks. This child node definition
should follow the bindings specified in
@@ -45,7 +45,7 @@ properties:
reset-controller:
# Child node
type: object
- $ref: "../reset/canaan,k210-rst.yaml"
+ $ref: ../reset/canaan,k210-rst.yaml
description:
Reset controller for the SoC. This child node definition
should follow the bindings specified in
@@ -54,7 +54,7 @@ properties:
syscon-reboot:
# Child node
type: object
- $ref: "../power/reset/syscon-reboot.yaml"
+ $ref: ../power/reset/syscon-reboot.yaml
description:
Reboot method for the SoC. This child node definition
should follow the bindings specified in
@@ -65,7 +65,7 @@ properties:
ARM Cortex M4 Co-processor. Contains the name of the rpmsg
device. Used to match the subnode to the rpmsg device announced by
the SCP.
- $ref: "/schemas/types.yaml#/definitions/string"
+ $ref: /schemas/types.yaml#/definitions/string
spi-max-frequency: true
@@ -94,23 +94,23 @@ properties:
const: 0
typec:
- $ref: "/schemas/chrome/google,cros-ec-typec.yaml#"
+ $ref: /schemas/chrome/google,cros-ec-typec.yaml#
ec-pwm:
- $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
+ $ref: /schemas/pwm/google,cros-ec-pwm.yaml#
deprecated: true
pwm:
- $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
+ $ref: /schemas/pwm/google,cros-ec-pwm.yaml#
kbd-led-backlight:
- $ref: "/schemas/chrome/google,cros-kbd-led-backlight.yaml#"
+ $ref: /schemas/chrome/google,cros-kbd-led-backlight.yaml#
keyboard-controller:
- $ref: "/schemas/input/google,cros-ec-keyb.yaml#"
+ $ref: /schemas/input/google,cros-ec-keyb.yaml#
proximity:
- $ref: "/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#"
+ $ref: /schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#
codecs:
type: object
@@ -126,7 +126,7 @@ properties:
patternProperties:
"^ec-codec@[a-f0-9]+$":
type: object
- $ref: "/schemas/sound/google,cros-ec-codec.yaml#"
+ $ref: /schemas/sound/google,cros-ec-codec.yaml#
required:
- "#address-cells"
@@ -151,15 +151,15 @@ properties:
patternProperties:
"^i2c-tunnel[0-9]*$":
type: object
- $ref: "/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#"
+ $ref: /schemas/i2c/google,cros-ec-i2c-tunnel.yaml#
"^regulator@[0-9]+$":
type: object
- $ref: "/schemas/regulator/google,cros-ec-regulator.yaml#"
+ $ref: /schemas/regulator/google,cros-ec-regulator.yaml#
"^extcon[0-9]*$":
type: object
- $ref: "/schemas/extcon/extcon-usbc-cros-ec.yaml#"
+ $ref: /schemas/extcon/extcon-usbc-cros-ec.yaml#
required:
- compatible
@@ -53,7 +53,7 @@ properties:
'^ldo[0-9]+$':
type: object
- $ref: "/schemas/regulator/regulator.yaml#"
+ $ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
@@ -49,7 +49,7 @@ patternProperties:
"rtc@[0-9a-f]+$":
type: object
- $ref: "../rtc/qcom-pm8xxx-rtc.yaml"
+ $ref: ../rtc/qcom-pm8xxx-rtc.yaml
required:
- compatible
@@ -46,7 +46,7 @@ properties:
rohm,clkout-open-drain:
description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
@@ -46,7 +46,7 @@ properties:
rohm,clkout-open-drain:
description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
@@ -156,7 +156,7 @@ properties:
entry has a value that is out of range for a 16 bit register then the
chip default will be used. If present exactly five values must be
specified.
- $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ $ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 5
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/mfd/x-powers,ac100.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mfd/x-powers,ac100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: X-Powers AC100
@@ -2,8 +2,8 @@
# Copyright 2019 Bootlin
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/mfd/xylon,logicvc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mfd/xylon,logicvc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xylon LogiCVC multi-function device
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> --- .../bindings/mfd/canaan,k210-sysctl.yaml | 6 ++--- .../bindings/mfd/google,cros-ec.yaml | 22 +++++++++---------- .../mfd/hisilicon,hi6421-spmi-pmic.yaml | 2 +- .../devicetree/bindings/mfd/qcom-pm8xxx.yaml | 2 +- .../bindings/mfd/rohm,bd71815-pmic.yaml | 2 +- .../bindings/mfd/rohm,bd71828-pmic.yaml | 2 +- .../devicetree/bindings/mfd/wlf,arizona.yaml | 2 +- .../bindings/mfd/x-powers,ac100.yaml | 4 ++-- .../bindings/mfd/xylon,logicvc.yaml | 4 ++-- 9 files changed, 23 insertions(+), 23 deletions(-)