| Message ID | 20230327132718.573-4-quic_devipriy@quicinc.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | Add minimal boot support for IPQ9574 | expand |
On Mon, 27 Mar 2023 at 16:28, Devi Priya <quic_devipriy@quicinc.com> wrote: > > Add initial device tree support for Qualcomm IPQ9574 SoC and > Reference Design Platform(RDP) 433 which is based on IPQ9574 > family of SoCs > > Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> > Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> > Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> > Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> > Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> > --- > Changes in V10: > - Renamed the Board Device Tree Source to use the RDP numbers > - Updated the Makefile, subject and commit message accordingly > > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 84 ++++++ > arch/arm64/boot/dts/qcom/ipq9574.dtsi | 270 ++++++++++++++++++++ > 3 files changed, 355 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts > create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 1a29403400b7..52f1f92c5195 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb > dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb > +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb > diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts > new file mode 100644 > index 000000000000..2ce8e09e7565 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts > @@ -0,0 +1,84 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > +/* > + * IPQ9574 RDP433 board device tree source > + * > + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. > + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include "ipq9574.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; > + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; > + > + aliases { > + serial0 = &blsp1_uart2; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&blsp1_uart2 { > + pinctrl-0 = <&uart2_pins>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&sdhc_1 { > + pinctrl-0 = <&sdc_default_state>; > + pinctrl-names = "default"; > + mmc-ddr-1_8v; > + mmc-hs200-1_8v; > + mmc-hs400-1_8v; > + mmc-hs400-enhanced-strobe; > + max-frequency = <384000000>; > + bus-width = <8>; > + status = "okay"; > +}; > + > +&sleep_clk { > + clock-frequency = <32000>; > +}; > + > +&tlmm { > + sdc_default_state: sdc-default-state { > + clk-pins { > + pins = "gpio5"; > + function = "sdc_clk"; > + drive-strength = <8>; > + bias-disable; > + }; > + > + cmd-pins { > + pins = "gpio4"; > + function = "sdc_cmd"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + > + data-pins { > + pins = "gpio0", "gpio1", "gpio2", > + "gpio3", "gpio6", "gpio7", > + "gpio8", "gpio9"; > + function = "sdc_data"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + > + rclk-pins { > + pins = "gpio10"; > + function = "sdc_rclk"; > + drive-strength = <8>; > + bias-pull-down; > + }; > + }; > +}; > + > +&xo_board_clk { > + clock-frequency = <24000000>; > +}; > diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > new file mode 100644 > index 000000000000..3bb7435f5e7f > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > @@ -0,0 +1,270 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > +/* > + * IPQ9574 SoC device tree source > + * > + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. > + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/clock/qcom,ipq9574-gcc.h> > +#include <dt-bindings/reset/qcom,ipq9574-gcc.h> > + > +/ { > + interrupt-parent = <&intc>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + clocks { > + bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk { > + compatible = "fixed-clock"; > + clock-frequency = <353000000>; > + #clock-cells = <0>; > + }; What is the source for this clock? With it clocking at 353 MHz, I doubt that it is an external clock. > + > + sleep_clk: sleep-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + }; > + > + xo_board_clk: xo-board-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + }; > + }; [skipped the rest]
On 3/27/2023 8:15 PM, Dmitry Baryshkov wrote: > On Mon, 27 Mar 2023 at 16:28, Devi Priya <quic_devipriy@quicinc.com> wrote: >> >> Add initial device tree support for Qualcomm IPQ9574 SoC and >> Reference Design Platform(RDP) 433 which is based on IPQ9574 >> family of SoCs >> >> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> >> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> >> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> >> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> >> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> >> --- >> Changes in V10: >> - Renamed the Board Device Tree Source to use the RDP numbers >> - Updated the Makefile, subject and commit message accordingly >> >> arch/arm64/boot/dts/qcom/Makefile | 1 + >> arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 84 ++++++ >> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 270 ++++++++++++++++++++ >> 3 files changed, 355 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts >> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi >> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >> index 1a29403400b7..52f1f92c5195 100644 >> --- a/arch/arm64/boot/dts/qcom/Makefile >> +++ b/arch/arm64/boot/dts/qcom/Makefile >> @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb >> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb >> +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb >> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts >> new file mode 100644 >> index 000000000000..2ce8e09e7565 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts >> @@ -0,0 +1,84 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) >> +/* >> + * IPQ9574 RDP433 board device tree source >> + * >> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. >> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +/dts-v1/; >> + >> +#include "ipq9574.dtsi" >> + >> +/ { >> + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; >> + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; >> + >> + aliases { >> + serial0 = &blsp1_uart2; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> +}; >> + >> +&blsp1_uart2 { >> + pinctrl-0 = <&uart2_pins>; >> + pinctrl-names = "default"; >> + status = "okay"; >> +}; >> + >> +&sdhc_1 { >> + pinctrl-0 = <&sdc_default_state>; >> + pinctrl-names = "default"; >> + mmc-ddr-1_8v; >> + mmc-hs200-1_8v; >> + mmc-hs400-1_8v; >> + mmc-hs400-enhanced-strobe; >> + max-frequency = <384000000>; >> + bus-width = <8>; >> + status = "okay"; >> +}; >> + >> +&sleep_clk { >> + clock-frequency = <32000>; >> +}; >> + >> +&tlmm { >> + sdc_default_state: sdc-default-state { >> + clk-pins { >> + pins = "gpio5"; >> + function = "sdc_clk"; >> + drive-strength = <8>; >> + bias-disable; >> + }; >> + >> + cmd-pins { >> + pins = "gpio4"; >> + function = "sdc_cmd"; >> + drive-strength = <8>; >> + bias-pull-up; >> + }; >> + >> + data-pins { >> + pins = "gpio0", "gpio1", "gpio2", >> + "gpio3", "gpio6", "gpio7", >> + "gpio8", "gpio9"; >> + function = "sdc_data"; >> + drive-strength = <8>; >> + bias-pull-up; >> + }; >> + >> + rclk-pins { >> + pins = "gpio10"; >> + function = "sdc_rclk"; >> + drive-strength = <8>; >> + bias-pull-down; >> + }; >> + }; >> +}; >> + >> +&xo_board_clk { >> + clock-frequency = <24000000>; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi >> new file mode 100644 >> index 000000000000..3bb7435f5e7f >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi >> @@ -0,0 +1,270 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) >> +/* >> + * IPQ9574 SoC device tree source >> + * >> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. >> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +#include <dt-bindings/interrupt-controller/arm-gic.h> >> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h> >> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h> >> + >> +/ { >> + interrupt-parent = <&intc>; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + >> + clocks { >> + bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk { >> + compatible = "fixed-clock"; >> + clock-frequency = <353000000>; >> + #clock-cells = <0>; >> + }; > > What is the source for this clock? With it clocking at 353 MHz, I > doubt that it is an external clock. bias_pll_ubi_nc_clk (353MHz)is a backup source for Q6_AXIM2_CLK/PCIE2_AXIM_CLK/PCIE3_AXIM_CLK/SNOC-CLK It is from the CMN_PLL, and is the same as that of PPE core clock. Do you suggest to move its clock-frequency to Board DT similar to xo/sleep clock? > >> + >> + sleep_clk: sleep-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + }; >> + >> + xo_board_clk: xo-board-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + }; >> + }; > > [skipped the rest] > Regards, Devi Priya
On 28.03.2023 09:31, Devi Priya wrote: > > > On 3/27/2023 8:15 PM, Dmitry Baryshkov wrote: >> On Mon, 27 Mar 2023 at 16:28, Devi Priya <quic_devipriy@quicinc.com> wrote: >>> >>> Add initial device tree support for Qualcomm IPQ9574 SoC and >>> Reference Design Platform(RDP) 433 which is based on IPQ9574 >>> family of SoCs >>> >>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> >>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> >>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> >>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> >>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> >>> --- >>> Changes in V10: >>> - Renamed the Board Device Tree Source to use the RDP numbers >>> - Updated the Makefile, subject and commit message accordingly >>> >>> arch/arm64/boot/dts/qcom/Makefile | 1 + >>> arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 84 ++++++ >>> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 270 ++++++++++++++++++++ >>> 3 files changed, 355 insertions(+) >>> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts >>> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi >>> >>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >>> index 1a29403400b7..52f1f92c5195 100644 >>> --- a/arch/arm64/boot/dts/qcom/Makefile >>> +++ b/arch/arm64/boot/dts/qcom/Makefile >>> @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb >>> +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb >>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts >>> new file mode 100644 >>> index 000000000000..2ce8e09e7565 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts >>> @@ -0,0 +1,84 @@ >>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) >>> +/* >>> + * IPQ9574 RDP433 board device tree source >>> + * >>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. >>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. >>> + */ >>> + >>> +/dts-v1/; >>> + >>> +#include "ipq9574.dtsi" >>> + >>> +/ { >>> + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; >>> + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; >>> + >>> + aliases { >>> + serial0 = &blsp1_uart2; >>> + }; >>> + >>> + chosen { >>> + stdout-path = "serial0:115200n8"; >>> + }; >>> +}; >>> + >>> +&blsp1_uart2 { >>> + pinctrl-0 = <&uart2_pins>; >>> + pinctrl-names = "default"; >>> + status = "okay"; >>> +}; >>> + >>> +&sdhc_1 { >>> + pinctrl-0 = <&sdc_default_state>; >>> + pinctrl-names = "default"; >>> + mmc-ddr-1_8v; >>> + mmc-hs200-1_8v; >>> + mmc-hs400-1_8v; >>> + mmc-hs400-enhanced-strobe; >>> + max-frequency = <384000000>; >>> + bus-width = <8>; >>> + status = "okay"; >>> +}; >>> + >>> +&sleep_clk { >>> + clock-frequency = <32000>; >>> +}; >>> + >>> +&tlmm { >>> + sdc_default_state: sdc-default-state { >>> + clk-pins { >>> + pins = "gpio5"; >>> + function = "sdc_clk"; >>> + drive-strength = <8>; >>> + bias-disable; >>> + }; >>> + >>> + cmd-pins { >>> + pins = "gpio4"; >>> + function = "sdc_cmd"; >>> + drive-strength = <8>; >>> + bias-pull-up; >>> + }; >>> + >>> + data-pins { >>> + pins = "gpio0", "gpio1", "gpio2", >>> + "gpio3", "gpio6", "gpio7", >>> + "gpio8", "gpio9"; >>> + function = "sdc_data"; >>> + drive-strength = <8>; >>> + bias-pull-up; >>> + }; >>> + >>> + rclk-pins { >>> + pins = "gpio10"; >>> + function = "sdc_rclk"; >>> + drive-strength = <8>; >>> + bias-pull-down; >>> + }; >>> + }; >>> +}; >>> + >>> +&xo_board_clk { >>> + clock-frequency = <24000000>; >>> +}; >>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi >>> new file mode 100644 >>> index 000000000000..3bb7435f5e7f >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi >>> @@ -0,0 +1,270 @@ >>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) >>> +/* >>> + * IPQ9574 SoC device tree source >>> + * >>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. >>> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. >>> + */ >>> + >>> +#include <dt-bindings/interrupt-controller/arm-gic.h> >>> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h> >>> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h> >>> + >>> +/ { >>> + interrupt-parent = <&intc>; >>> + #address-cells = <2>; >>> + #size-cells = <2>; >>> + >>> + clocks { >>> + bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk { >>> + compatible = "fixed-clock"; >>> + clock-frequency = <353000000>; >>> + #clock-cells = <0>; >>> + }; >> >> What is the source for this clock? With it clocking at 353 MHz, I >> doubt that it is an external clock. > bias_pll_ubi_nc_clk (353MHz)is a backup source > for Q6_AXIM2_CLK Is this not handled internally by MPSS firmware or RPM then? Konrad /PCIE2_AXIM_CLK/PCIE3_AXIM_CLK/SNOC-CLK > It is from the CMN_PLL, and is the same as that of PPE core clock. > Do you suggest to move its clock-frequency to Board DT similar to xo/sleep clock? >> >>> + >>> + sleep_clk: sleep-clk { >>> + compatible = "fixed-clock"; >>> + #clock-cells = <0>; >>> + }; >>> + >>> + xo_board_clk: xo-board-clk { >>> + compatible = "fixed-clock"; >>> + #clock-cells = <0>; >>> + }; >>> + }; >> >> [skipped the rest] >> > Regards, > Devi Priya
On Tue, 28 Mar 2023 at 10:31, Devi Priya <quic_devipriy@quicinc.com> wrote: > On 3/27/2023 8:15 PM, Dmitry Baryshkov wrote: > > On Mon, 27 Mar 2023 at 16:28, Devi Priya <quic_devipriy@quicinc.com> wrote: > >> > >> Add initial device tree support for Qualcomm IPQ9574 SoC and > >> Reference Design Platform(RDP) 433 which is based on IPQ9574 > >> family of SoCs > >> > >> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> > >> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> > >> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> > >> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> > >> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> > >> --- > >> Changes in V10: > >> - Renamed the Board Device Tree Source to use the RDP numbers > >> - Updated the Makefile, subject and commit message accordingly > >> > >> arch/arm64/boot/dts/qcom/Makefile | 1 + > >> arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 84 ++++++ > >> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 270 ++++++++++++++++++++ > >> 3 files changed, 355 insertions(+) > >> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts > >> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi > >> > >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > >> index 1a29403400b7..52f1f92c5195 100644 > >> --- a/arch/arm64/boot/dts/qcom/Makefile > >> +++ b/arch/arm64/boot/dts/qcom/Makefile > >> @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb > >> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb > >> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb > >> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb > >> +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb > >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb > >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb > >> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb > >> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts > >> new file mode 100644 > >> index 000000000000..2ce8e09e7565 > >> --- /dev/null > >> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts > >> @@ -0,0 +1,84 @@ > >> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > >> +/* > >> + * IPQ9574 RDP433 board device tree source > >> + * > >> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. > >> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. > >> + */ > >> + > >> +/dts-v1/; > >> + > >> +#include "ipq9574.dtsi" > >> + > >> +/ { > >> + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; > >> + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; > >> + > >> + aliases { > >> + serial0 = &blsp1_uart2; > >> + }; > >> + > >> + chosen { > >> + stdout-path = "serial0:115200n8"; > >> + }; > >> +}; > >> + > >> +&blsp1_uart2 { > >> + pinctrl-0 = <&uart2_pins>; > >> + pinctrl-names = "default"; > >> + status = "okay"; > >> +}; > >> + > >> +&sdhc_1 { > >> + pinctrl-0 = <&sdc_default_state>; > >> + pinctrl-names = "default"; > >> + mmc-ddr-1_8v; > >> + mmc-hs200-1_8v; > >> + mmc-hs400-1_8v; > >> + mmc-hs400-enhanced-strobe; > >> + max-frequency = <384000000>; > >> + bus-width = <8>; > >> + status = "okay"; > >> +}; > >> + > >> +&sleep_clk { > >> + clock-frequency = <32000>; > >> +}; > >> + > >> +&tlmm { > >> + sdc_default_state: sdc-default-state { > >> + clk-pins { > >> + pins = "gpio5"; > >> + function = "sdc_clk"; > >> + drive-strength = <8>; > >> + bias-disable; > >> + }; > >> + > >> + cmd-pins { > >> + pins = "gpio4"; > >> + function = "sdc_cmd"; > >> + drive-strength = <8>; > >> + bias-pull-up; > >> + }; > >> + > >> + data-pins { > >> + pins = "gpio0", "gpio1", "gpio2", > >> + "gpio3", "gpio6", "gpio7", > >> + "gpio8", "gpio9"; > >> + function = "sdc_data"; > >> + drive-strength = <8>; > >> + bias-pull-up; > >> + }; > >> + > >> + rclk-pins { > >> + pins = "gpio10"; > >> + function = "sdc_rclk"; > >> + drive-strength = <8>; > >> + bias-pull-down; > >> + }; > >> + }; > >> +}; > >> + > >> +&xo_board_clk { > >> + clock-frequency = <24000000>; > >> +}; > >> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > >> new file mode 100644 > >> index 000000000000..3bb7435f5e7f > >> --- /dev/null > >> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > >> @@ -0,0 +1,270 @@ > >> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > >> +/* > >> + * IPQ9574 SoC device tree source > >> + * > >> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. > >> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. > >> + */ > >> + > >> +#include <dt-bindings/interrupt-controller/arm-gic.h> > >> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h> > >> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h> > >> + > >> +/ { > >> + interrupt-parent = <&intc>; > >> + #address-cells = <2>; > >> + #size-cells = <2>; > >> + > >> + clocks { > >> + bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk { > >> + compatible = "fixed-clock"; > >> + clock-frequency = <353000000>; > >> + #clock-cells = <0>; > >> + }; > > > > What is the source for this clock? With it clocking at 353 MHz, I > > doubt that it is an external clock. > bias_pll_ubi_nc_clk (353MHz)is a backup source > for Q6_AXIM2_CLK/PCIE2_AXIM_CLK/PCIE3_AXIM_CLK/SNOC-CLK > It is from the CMN_PLL, and is the same as that of PPE core clock. > Do you suggest to move its clock-frequency to Board DT similar to > xo/sleep clock? No, I suggest moving it to the device where it originates. If it comes from GCC, it should be provided by the GCC, not by the top-level fixed clock. > > > >> + > >> + sleep_clk: sleep-clk { > >> + compatible = "fixed-clock"; > >> + #clock-cells = <0>; > >> + }; > >> + > >> + xo_board_clk: xo-board-clk { > >> + compatible = "fixed-clock"; > >> + #clock-cells = <0>; > >> + }; > >> + }; > > > > [skipped the rest] > > > Regards, > Devi Priya
On 3/28/2023 4:09 PM, Dmitry Baryshkov wrote: > On Tue, 28 Mar 2023 at 10:31, Devi Priya <quic_devipriy@quicinc.com> wrote: >> On 3/27/2023 8:15 PM, Dmitry Baryshkov wrote: >>> On Mon, 27 Mar 2023 at 16:28, Devi Priya <quic_devipriy@quicinc.com> wrote: >>>> >>>> Add initial device tree support for Qualcomm IPQ9574 SoC and >>>> Reference Design Platform(RDP) 433 which is based on IPQ9574 >>>> family of SoCs >>>> >>>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> >>>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> >>>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> >>>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> >>>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> >>>> --- >>>> Changes in V10: >>>> - Renamed the Board Device Tree Source to use the RDP numbers >>>> - Updated the Makefile, subject and commit message accordingly >>>> >>>> arch/arm64/boot/dts/qcom/Makefile | 1 + >>>> arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 84 ++++++ >>>> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 270 ++++++++++++++++++++ >>>> 3 files changed, 355 insertions(+) >>>> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts >>>> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi >>>> >>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >>>> index 1a29403400b7..52f1f92c5195 100644 >>>> --- a/arch/arm64/boot/dts/qcom/Makefile >>>> +++ b/arch/arm64/boot/dts/qcom/Makefile >>>> @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb >>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb >>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb >>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb >>>> +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb >>>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb >>>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb >>>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb >>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts >>>> new file mode 100644 >>>> index 000000000000..2ce8e09e7565 >>>> --- /dev/null >>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts >>>> @@ -0,0 +1,84 @@ >>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) >>>> +/* >>>> + * IPQ9574 RDP433 board device tree source >>>> + * >>>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. >>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. >>>> + */ >>>> + >>>> +/dts-v1/; >>>> + >>>> +#include "ipq9574.dtsi" >>>> + >>>> +/ { >>>> + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; >>>> + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; >>>> + >>>> + aliases { >>>> + serial0 = &blsp1_uart2; >>>> + }; >>>> + >>>> + chosen { >>>> + stdout-path = "serial0:115200n8"; >>>> + }; >>>> +}; >>>> + >>>> +&blsp1_uart2 { >>>> + pinctrl-0 = <&uart2_pins>; >>>> + pinctrl-names = "default"; >>>> + status = "okay"; >>>> +}; >>>> + >>>> +&sdhc_1 { >>>> + pinctrl-0 = <&sdc_default_state>; >>>> + pinctrl-names = "default"; >>>> + mmc-ddr-1_8v; >>>> + mmc-hs200-1_8v; >>>> + mmc-hs400-1_8v; >>>> + mmc-hs400-enhanced-strobe; >>>> + max-frequency = <384000000>; >>>> + bus-width = <8>; >>>> + status = "okay"; >>>> +}; >>>> + >>>> +&sleep_clk { >>>> + clock-frequency = <32000>; >>>> +}; >>>> + >>>> +&tlmm { >>>> + sdc_default_state: sdc-default-state { >>>> + clk-pins { >>>> + pins = "gpio5"; >>>> + function = "sdc_clk"; >>>> + drive-strength = <8>; >>>> + bias-disable; >>>> + }; >>>> + >>>> + cmd-pins { >>>> + pins = "gpio4"; >>>> + function = "sdc_cmd"; >>>> + drive-strength = <8>; >>>> + bias-pull-up; >>>> + }; >>>> + >>>> + data-pins { >>>> + pins = "gpio0", "gpio1", "gpio2", >>>> + "gpio3", "gpio6", "gpio7", >>>> + "gpio8", "gpio9"; >>>> + function = "sdc_data"; >>>> + drive-strength = <8>; >>>> + bias-pull-up; >>>> + }; >>>> + >>>> + rclk-pins { >>>> + pins = "gpio10"; >>>> + function = "sdc_rclk"; >>>> + drive-strength = <8>; >>>> + bias-pull-down; >>>> + }; >>>> + }; >>>> +}; >>>> + >>>> +&xo_board_clk { >>>> + clock-frequency = <24000000>; >>>> +}; >>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi >>>> new file mode 100644 >>>> index 000000000000..3bb7435f5e7f >>>> --- /dev/null >>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi >>>> @@ -0,0 +1,270 @@ >>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) >>>> +/* >>>> + * IPQ9574 SoC device tree source >>>> + * >>>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. >>>> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. >>>> + */ >>>> + >>>> +#include <dt-bindings/interrupt-controller/arm-gic.h> >>>> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h> >>>> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h> >>>> + >>>> +/ { >>>> + interrupt-parent = <&intc>; >>>> + #address-cells = <2>; >>>> + #size-cells = <2>; >>>> + >>>> + clocks { >>>> + bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk { >>>> + compatible = "fixed-clock"; >>>> + clock-frequency = <353000000>; >>>> + #clock-cells = <0>; >>>> + }; >>> >>> What is the source for this clock? With it clocking at 353 MHz, I >>> doubt that it is an external clock. >> bias_pll_ubi_nc_clk (353MHz)is a backup source >> for Q6_AXIM2_CLK/PCIE2_AXIM_CLK/PCIE3_AXIM_CLK/SNOC-CLK >> It is from the CMN_PLL, and is the same as that of PPE core clock. >> Do you suggest to move its clock-frequency to Board DT similar to >> xo/sleep clock? > > No, I suggest moving it to the device where it originates. If it comes > from GCC, it should be provided by the GCC, not by the top-level fixed > clock.Bias PLL is a fixed PLL on the SoC which provides 352MHz. As it is just a backup source for PCIE2_AXIM_CLK, we would remove the clock node as it is not being used. > >>> >>>> + >>>> + sleep_clk: sleep-clk { >>>> + compatible = "fixed-clock"; >>>> + #clock-cells = <0>; >>>> + }; >>>> + >>>> + xo_board_clk: xo-board-clk { >>>> + compatible = "fixed-clock"; >>>> + #clock-cells = <0>; >>>> + }; >>>> + }; >>> >>> [skipped the rest] >>> >> Regards, >> Devi Priya > > > Regards, Devi Priya
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 1a29403400b7..52f1f92c5195 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts new file mode 100644 index 000000000000..2ce8e09e7565 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP433 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + max-frequency = <384000000>; + bus-width = <8>; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + + rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi new file mode 100644 index 000000000000..3bb7435f5e7f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 SoC device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk { + compatible = "fixed-clock"; + clock-frequency = <353000000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_region: tz@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + interrupt-controller; + #interrupt-cells = <2>; + + uart2_pins: uart2-state { + pins = "gpio34", "gpio35"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,ipq9574-gcc"; + reg = <0x01800000 0x80000>; + clocks = <&xo_board_clk>, + <&sleep_clk>, + <&bias_pll_ubi_nc_clk>, + <0>, + <0>, + <0>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + sdhc_1: mmc@7804000 { + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board_clk>; + clock-names = "iface", "core", "xo"; + non-removable; + status = "disabled"; + }; + + blsp1_uart2: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00000000 0xffd>; + msi-controller; + }; + + v2m1: v2m@1000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00001000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00002000 0xffd>; + msi-controller; + }; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b120000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +};