[V2] dt-bindings: usb: typec-tcpci: convert to DT schema format

Commit Message

Peng Fan (OSS) March 30, 2023, 9:17 a.m. UTC

From: Peng Fan <[e-mail]>

Convert the binding to DT schema format, and rename it to
nxp,ptn5110.yaml

Signed-off-by: Peng Fan <[e-mail]>
---

V2:
 Rename to nxp,ptn5110.yaml
 Drop port property

 Note:
 There will be dtbs_check failure, Li Jun has a patch to update
 driver: https://patchwork.kernel.org/project/linux-usb/patch/[e-mail]/
 Then he will also update device tree

 .../devicetree/bindings/usb/nxp,ptn5110.yaml  | 72 +++++++++++++++++++
 .../devicetree/bindings/usb/typec-tcpci.txt   | 49 -------------
 2 files changed, 72 insertions(+), 49 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
 delete mode 100644 Documentation/devicetree/bindings/usb/typec-tcpci.txt

Comments

Krzysztof Kozlowski March 30, 2023, 1:50 p.m. UTC | #1

On 30/03/2023 11:17, Peng Fan (OSS) wrote:
> From: Peng Fan <[e-mail]>
> 
> Convert the binding to DT schema format, and rename it to
> nxp,ptn5110.yaml
> 
> Signed-off-by: Peng Fan <[e-mail]>
> ---
> 
> V2:
>  Rename to nxp,ptn5110.yaml
>  Drop port property


Reviewed-by: Krzysztof Kozlowski <[e-mail]>

Best regards,
Krzysztof

Patch

diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
new file mode 100644
index 000000000000..a940815ebd6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
@@ -0,0 +1,72 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN5110 Typec Port Cotroller
+
+maintainers:
+  - Li Jun <[e-mail]>
+
+properties:
+  compatible:
+    const: nxp,ptn5110
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tcpci@50 {
+            compatible = "nxp,ptn5110";
+            reg = <0x50>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+            usb_con: connector {
+                compatible = "usb-c-connector";
+                label = "USB-C";
+                data-role = "dual";
+                power-role = "dual";
+                try-power-role = "sink";
+                source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+                sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM) PDO_VAR(5000, 12000, 2000)>;
+                op-sink-microwatt = <10000000>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                       reg = <0>;
+                       typec1_dr_sw: endpoint {
+                           remote-endpoint = <&usb1_drd_sw>;
+                       };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
deleted file mode 100644
index 2082522b1c32..000000000000
--- a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
+++ /dev/null
@@ -1,49 +0,0 @@ 
-TCPCI(Typec port cotroller interface) binding
----------------------------------------------
-
-Required properties:
-- compatible:       should be set one of following:
-		    - "nxp,ptn5110" for NXP USB PD TCPC PHY IC ptn5110.
-
-- reg:              the i2c slave address of typec port controller device.
-- interrupt-parent: the phandle to the interrupt controller which provides
-                    the interrupt.
-- interrupts:       interrupt specification for tcpci alert.
-
-Required sub-node:
-- connector: The "usb-c-connector" attached to the tcpci chip, the bindings
-  of connector node are specified in
-  Documentation/devicetree/bindings/connector/usb-connector.yaml
-
-Example:
-
-ptn5110@50 {
-	compatible = "nxp,ptn5110";
-	reg = <0x50>;
-	interrupt-parent = <&gpio3>;
-	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-
-	usb_con: connector {
-		compatible = "usb-c-connector";
-		label = "USB-C";
-		data-role = "dual";
-		power-role = "dual";
-		try-power-role = "sink";
-		source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
-		sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
-			     PDO_VAR(5000, 12000, 2000)>;
-		op-sink-microwatt = <10000000>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-				usb_con_ss: endpoint {
-					remote-endpoint = <&usb3_data_ss>;
-				};
-			};
-		};
-	};
-};