diff mbox series

[V11,3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant

Message ID 20230404101622.5394-4-quic_devipriy@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add minimal boot support for IPQ9574 | expand

Commit Message

Devi Priya April 4, 2023, 10:16 a.m. UTC
Add initial device tree support for Qualcomm IPQ9574 SoC and
Reference Design Platform(RDP) 433 which is based on IPQ9574
family of SoCs

Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
---
 Changes in V11:
	- Dropped the unused backup clock source bias_pll_ubi_nc_clk

 arch/arm64/boot/dts/qcom/Makefile           |   1 +
 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts |  84 +++++++
 arch/arm64/boot/dts/qcom/ipq9574.dtsi       | 263 ++++++++++++++++++++
 3 files changed, 348 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi

Comments

Marc Zyngier April 4, 2023, 11:03 a.m. UTC | #1
On 2023-04-04 11:16, Devi Priya wrote:
> Add initial device tree support for Qualcomm IPQ9574 SoC and
> Reference Design Platform(RDP) 433 which is based on IPQ9574
> family of SoCs
> 
> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
> ---
>  Changes in V11:
> 	- Dropped the unused backup clock source bias_pll_ubi_nc_clk
> 
>  arch/arm64/boot/dts/qcom/Makefile           |   1 +
>  arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts |  84 +++++++
>  arch/arm64/boot/dts/qcom/ipq9574.dtsi       | 263 ++++++++++++++++++++
>  3 files changed, 348 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
> 

[...]

> +		intc: interrupt-controller@b000000 {
> +			compatible = "qcom,msm-qgic2";
> +			reg = <0x0b000000 0x1000>,  /* GICD */
> +			      <0x0b002000 0x1000>,  /* GICC */

This is definitely wrong. The GICC region cannot be less than
8kB, as the GICC_DIR register is in the second 4kB region.

I'm pretty sure the kernel shouts at you when booting at EL2.

> +			      <0x0b001000 0x1000>,  /* GICH */
> +			      <0x0b004000 0x1000>;  /* GICV */

Same thing here.

> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;

Missing target CPU encoding.

         M.
Devi Priya April 7, 2023, 10:21 a.m. UTC | #2
On 4/4/2023 4:33 PM, Marc Zyngier wrote:
> On 2023-04-04 11:16, Devi Priya wrote:
>> Add initial device tree support for Qualcomm IPQ9574 SoC and
>> Reference Design Platform(RDP) 433 which is based on IPQ9574
>> family of SoCs
>>
>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
>> ---
>>  Changes in V11:
>>     - Dropped the unused backup clock source bias_pll_ubi_nc_clk
>>
>>  arch/arm64/boot/dts/qcom/Makefile           |   1 +
>>  arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts |  84 +++++++
>>  arch/arm64/boot/dts/qcom/ipq9574.dtsi       | 263 ++++++++++++++++++++
>>  3 files changed, 348 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>  create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>
> 
> [...]
> 
>> +        intc: interrupt-controller@b000000 {
>> +            compatible = "qcom,msm-qgic2";
>> +            reg = <0x0b000000 0x1000>,  /* GICD */
>> +                  <0x0b002000 0x1000>,  /* GICC */
> 
> This is definitely wrong. The GICC region cannot be less than
> 8kB, as the GICC_DIR register is in the second 4kB region.
> 
> I'm pretty sure the kernel shouts at you when booting at EL2.
Got it, will update the size to 8kB
> 
>> +                  <0x0b001000 0x1000>,  /* GICH */
>> +                  <0x0b004000 0x1000>;  /* GICV */
> 
> Same thing here.
okay
> 
>> +            #address-cells = <1>;
>> +            #size-cells = <1>;
>> +            interrupt-controller;
>> +            #interrupt-cells = <3>;
>> +            interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> 
> Missing target CPU encoding.
Okay, will update the interrupts as below. Hope this is the expectation?
Please let us know if we are missing something
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> 
>          M.
Best Regards,
Devi Priya
Marc Zyngier April 7, 2023, 2:06 p.m. UTC | #3
On 2023-04-07 11:21, Devi Priya wrote:
> On 4/4/2023 4:33 PM, Marc Zyngier wrote:
>> On 2023-04-04 11:16, Devi Priya wrote:
>>> +            #address-cells = <1>;
>>> +            #size-cells = <1>;
>>> +            interrupt-controller;
>>> +            #interrupt-cells = <3>;
>>> +            interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> 
>> Missing target CPU encoding.
> Okay, will update the interrupts as below. Hope this is the 
> expectation?
> Please let us know if we are missing something
> interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | 
> IRQ_TYPE_LEVEL_HIGH)>;

Yup.

         M.
Devi Priya April 7, 2023, 2:09 p.m. UTC | #4
On 4/7/2023 7:36 PM, Marc Zyngier wrote:
> On 2023-04-07 11:21, Devi Priya wrote:
>> On 4/4/2023 4:33 PM, Marc Zyngier wrote:
>>> On 2023-04-04 11:16, Devi Priya wrote:
>>>> +            #address-cells = <1>;
>>>> +            #size-cells = <1>;
>>>> +            interrupt-controller;
>>>> +            #interrupt-cells = <3>;
>>>> +            interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>>>
>>> Missing target CPU encoding.
>> Okay, will update the interrupts as below. Hope this is the expectation?
>> Please let us know if we are missing something
>> interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> 
> Yup.
Thanks!
> 
>          M.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1a29403400b7..52f1f92c5195 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -8,6 +8,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp433.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-acer-a1-724.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-asus-z00l.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
new file mode 100644
index 000000000000..2ce8e09e7565
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -0,0 +1,84 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP433 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq9574.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
+	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	max-frequency = <384000000>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio5";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio4";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2",
+			       "gpio3", "gpio6", "gpio7",
+			       "gpio8", "gpio9";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		rclk-pins {
+			pins = "gpio10";
+			function = "sdc_rclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
new file mode 100644
index 000000000000..c0e35308d8e0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -0,0 +1,263 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 SoC device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x40000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz_region: tz@4a600000 {
+			reg = <0x0 0x4a600000 0x0 0x400000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq9574-tlmm";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 65>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart2_pins: uart2-state {
+				pins = "gpio34", "gpio35";
+				function = "blsp2_uart";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,ipq9574-gcc";
+			reg = <0x01800000 0x80000>;
+			clocks = <&xo_board_clk>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		sdhc_1: mmc@7804000 {
+			compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "iface", "core", "xo";
+			non-removable;
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b1000 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,  /* GICD */
+			      <0x0b002000 0x1000>,  /* GICC */
+			      <0x0b001000 0x1000>,  /* GICH */
+			      <0x0b004000 0x1000>;  /* GICV */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			ranges = <0 0x0b00c000 0x3000>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00000000 0xffd>;
+				msi-controller;
+			};
+
+			v2m1: v2m@1000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00001000 0xffd>;
+				msi-controller;
+			};
+
+			v2m2: v2m@2000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00002000 0xffd>;
+				msi-controller;
+			};
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b120000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};