| Message ID | 20230405142926.842173-1-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | soundwire: qcom: Fix enumeration of second device on the bus | expand |
On 4/5/23 09:29, Krzysztof Kozlowski wrote: > Some Soundwire buses (like &swr0 on Qualcomm HDK8450) have two devices, > which can be brought from powerdown state one after another. We need to > keep enumerating them on each slave attached interrupt, otherwise only > first will appear. > > Cc: <stable@vger.kernel.org> > Fixes: a6e6581942ca ("soundwire: qcom: add auto enumeration support") > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Cc: Patrick Lai <quic_plai@quicinc.com> > --- > drivers/soundwire/qcom.c | 11 +++-------- > 1 file changed, 3 insertions(+), 8 deletions(-) > > diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c > index c296e0bf897b..1e5077d91f59 100644 > --- a/drivers/soundwire/qcom.c > +++ b/drivers/soundwire/qcom.c > @@ -587,14 +587,9 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id) > case SWRM_INTERRUPT_STATUS_CHANGE_ENUM_SLAVE_STATUS: > dev_dbg_ratelimited(swrm->dev, "SWR new slave attached\n"); > swrm->reg_read(swrm, SWRM_MCP_SLV_STATUS, &slave_status); > - if (swrm->slave_status == slave_status) { > - dev_dbg(swrm->dev, "Slave status not changed %x\n", > - slave_status); it's not clear to me how removing this test helps with the two-device configuration? Or is this a case where the status for both devices changes at the same time but the interrupt status remains set, so the next iteration of the loop is ignored? > - } else { > - qcom_swrm_get_device_status(swrm); > - qcom_swrm_enumerate(&swrm->bus); > - sdw_handle_slave_status(&swrm->bus, swrm->status); > - } > + qcom_swrm_get_device_status(swrm); > + qcom_swrm_enumerate(&swrm->bus); > + sdw_handle_slave_status(&swrm->bus, swrm->status); > break; > case SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET: > dev_err_ratelimited(swrm->dev,
On 05/04/2023 17:01, Pierre-Louis Bossart wrote: > > > On 4/5/23 09:29, Krzysztof Kozlowski wrote: >> Some Soundwire buses (like &swr0 on Qualcomm HDK8450) have two devices, >> which can be brought from powerdown state one after another. We need to >> keep enumerating them on each slave attached interrupt, otherwise only >> first will appear. >> >> Cc: <stable@vger.kernel.org> >> Fixes: a6e6581942ca ("soundwire: qcom: add auto enumeration support") >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> >> --- >> >> Cc: Patrick Lai <quic_plai@quicinc.com> >> --- >> drivers/soundwire/qcom.c | 11 +++-------- >> 1 file changed, 3 insertions(+), 8 deletions(-) >> >> diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c >> index c296e0bf897b..1e5077d91f59 100644 >> --- a/drivers/soundwire/qcom.c >> +++ b/drivers/soundwire/qcom.c >> @@ -587,14 +587,9 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id) >> case SWRM_INTERRUPT_STATUS_CHANGE_ENUM_SLAVE_STATUS: >> dev_dbg_ratelimited(swrm->dev, "SWR new slave attached\n"); >> swrm->reg_read(swrm, SWRM_MCP_SLV_STATUS, &slave_status); >> - if (swrm->slave_status == slave_status) { >> - dev_dbg(swrm->dev, "Slave status not changed %x\n", >> - slave_status); > > it's not clear to me how removing this test helps with the two-device > configuration? > > Or is this a case where the status for both devices changes at the same > time but the interrupt status remains set, so the next iteration of the > loop is ignored? I think the patch is not correct. I misinterpreted the slave status field and after double checking I see two speakers bound. Please ignore for now. Best regards, Krzysztof
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index c296e0bf897b..1e5077d91f59 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -587,14 +587,9 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id) case SWRM_INTERRUPT_STATUS_CHANGE_ENUM_SLAVE_STATUS: dev_dbg_ratelimited(swrm->dev, "SWR new slave attached\n"); swrm->reg_read(swrm, SWRM_MCP_SLV_STATUS, &slave_status); - if (swrm->slave_status == slave_status) { - dev_dbg(swrm->dev, "Slave status not changed %x\n", - slave_status); - } else { - qcom_swrm_get_device_status(swrm); - qcom_swrm_enumerate(&swrm->bus); - sdw_handle_slave_status(&swrm->bus, swrm->status); - } + qcom_swrm_get_device_status(swrm); + qcom_swrm_enumerate(&swrm->bus); + sdw_handle_slave_status(&swrm->bus, swrm->status); break; case SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET: dev_err_ratelimited(swrm->dev,
Some Soundwire buses (like &swr0 on Qualcomm HDK8450) have two devices, which can be brought from powerdown state one after another. We need to keep enumerating them on each slave attached interrupt, otherwise only first will appear. Cc: <stable@vger.kernel.org> Fixes: a6e6581942ca ("soundwire: qcom: add auto enumeration support") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Cc: Patrick Lai <quic_plai@quicinc.com> --- drivers/soundwire/qcom.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-)