diff mbox series

[v4,4/6] drm/msm/dsi: Use MSM and DRM DSC helper methods

Message ID 20230329-rfc-msm-dsc-helper-v4-4-1b79c78b30d7@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Introduce MSM-specific DSC helpers | expand

Commit Message

Jessica Zhang April 5, 2023, 12:41 a.m. UTC
Use MSM and DRM DSC helper methods to configure DSC for DSI.

Changes in V2:
- *_calculate_initial_scale_value --> *_set_initial_scale_value
- Split pkt_per_line and eol_byte_num changes to a separate patch
- Moved pclk_per_line calculation to hdisplay adjustment in `if (dsc)`
  block of dsi_update_dsc_timing()

Changes in v3:
- Split pclk_per_intf calculation into a separate patch
- Added slice_width check to dsi_timing_setup
- Used MSM DSC helper to calculate total_bytes_per_intf

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

Comments

Dmitry Baryshkov April 5, 2023, 7:27 p.m. UTC | #1
On 05/04/2023 03:41, Jessica Zhang wrote:
> Use MSM and DRM DSC helper methods to configure DSC for DSI.
> 
> Changes in V2:
> - *_calculate_initial_scale_value --> *_set_initial_scale_value
> - Split pkt_per_line and eol_byte_num changes to a separate patch
> - Moved pclk_per_line calculation to hdisplay adjustment in `if (dsc)`
>    block of dsi_update_dsc_timing()
> 
> Changes in v3:
> - Split pclk_per_intf calculation into a separate patch
> - Added slice_width check to dsi_timing_setup
> - Used MSM DSC helper to calculate total_bytes_per_intf
> 
> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
> ---
>   drivers/gpu/drm/msm/dsi/dsi_host.c | 13 ++++++++++---
>   1 file changed, 10 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 74d38f90398a..6a6218a9655f 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -28,6 +28,7 @@
>   #include "dsi.xml.h"
>   #include "sfpb.xml.h"
>   #include "dsi_cfg.h"
> +#include "msm_dsc_helper.h"
>   #include "msm_kms.h"
>   #include "msm_gem.h"
>   #include "phy/dsi_phy.h"
> @@ -848,7 +849,7 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
>   	/* first calculate dsc parameters and then program
>   	 * compress mode registers
>   	 */
> -	slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->slice_width);
> +	slice_per_intf = msm_dsc_get_slice_per_intf(dsc, hdisplay);
>   
>   	/*
>   	 * If slice_count is greater than slice_per_intf
> @@ -858,7 +859,7 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
>   	if (dsc->slice_count > slice_per_intf)
>   		dsc->slice_count = 1;
>   
> -	total_bytes_per_intf = dsc->slice_chunk_size * slice_per_intf;
> +	total_bytes_per_intf = msm_dsc_get_bytes_per_intf(dsc, hdisplay);
>   
>   	eol_byte_num = total_bytes_per_intf % 3;
>   	pkt_per_line = slice_per_intf / dsc->slice_count;
> @@ -936,6 +937,12 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>   			return;
>   		}
>   
> +		if (!dsc->slice_width || (mode->hdisplay < dsc->slice_width)) {
> +			pr_err("DSI: invalid slice width %d (pic_width: %d)\n",
> +			       dsc->slice_width, mode->hdisplay);
> +			return;
> +		}

This is not the "use of MSM and DRM DSC helper methods" and thus should 
be moved to a separate patch.

> +
>   		dsc->pic_width = mode->hdisplay;
>   		dsc->pic_height = mode->vdisplay;
>   		DBG("Mode %dx%d\n", dsc->pic_width, dsc->pic_height);
> @@ -1759,7 +1766,7 @@ static int dsi_populate_dsc_params(struct msm_dsi_host *msm_host, struct drm_dsc
>   		return ret;
>   	}
>   
> -	dsc->initial_scale_value = 32;
> +	drm_dsc_set_initial_scale_value(dsc);
>   	dsc->line_buf_depth = dsc->bits_per_component + 1;
>   
>   	return drm_dsc_compute_rc_parameters(dsc);
>
Jessica Zhang April 5, 2023, 8:39 p.m. UTC | #2
On 4/5/2023 12:27 PM, Dmitry Baryshkov wrote:
> On 05/04/2023 03:41, Jessica Zhang wrote:
>> Use MSM and DRM DSC helper methods to configure DSC for DSI.
>>
>> Changes in V2:
>> - *_calculate_initial_scale_value --> *_set_initial_scale_value
>> - Split pkt_per_line and eol_byte_num changes to a separate patch
>> - Moved pclk_per_line calculation to hdisplay adjustment in `if (dsc)`
>>    block of dsi_update_dsc_timing()
>>
>> Changes in v3:
>> - Split pclk_per_intf calculation into a separate patch
>> - Added slice_width check to dsi_timing_setup
>> - Used MSM DSC helper to calculate total_bytes_per_intf
>>
>> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
>> ---
>>   drivers/gpu/drm/msm/dsi/dsi_host.c | 13 ++++++++++---
>>   1 file changed, 10 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c 
>> b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> index 74d38f90398a..6a6218a9655f 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
>> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> @@ -28,6 +28,7 @@
>>   #include "dsi.xml.h"
>>   #include "sfpb.xml.h"
>>   #include "dsi_cfg.h"
>> +#include "msm_dsc_helper.h"
>>   #include "msm_kms.h"
>>   #include "msm_gem.h"
>>   #include "phy/dsi_phy.h"
>> @@ -848,7 +849,7 @@ static void dsi_update_dsc_timing(struct 
>> msm_dsi_host *msm_host, bool is_cmd_mod
>>       /* first calculate dsc parameters and then program
>>        * compress mode registers
>>        */
>> -    slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->slice_width);
>> +    slice_per_intf = msm_dsc_get_slice_per_intf(dsc, hdisplay);
>>       /*
>>        * If slice_count is greater than slice_per_intf
>> @@ -858,7 +859,7 @@ static void dsi_update_dsc_timing(struct 
>> msm_dsi_host *msm_host, bool is_cmd_mod
>>       if (dsc->slice_count > slice_per_intf)
>>           dsc->slice_count = 1;
>> -    total_bytes_per_intf = dsc->slice_chunk_size * slice_per_intf;
>> +    total_bytes_per_intf = msm_dsc_get_bytes_per_intf(dsc, hdisplay);
>>       eol_byte_num = total_bytes_per_intf % 3;
>>       pkt_per_line = slice_per_intf / dsc->slice_count;
>> @@ -936,6 +937,12 @@ static void dsi_timing_setup(struct msm_dsi_host 
>> *msm_host, bool is_bonded_dsi)
>>               return;
>>           }
>> +        if (!dsc->slice_width || (mode->hdisplay < dsc->slice_width)) {
>> +            pr_err("DSI: invalid slice width %d (pic_width: %d)\n",
>> +                   dsc->slice_width, mode->hdisplay);
>> +            return;
>> +        }
> 
> This is not the "use of MSM and DRM DSC helper methods" and thus should 
> be moved to a separate patch.

Hi Dmitry,

Acked.

Thanks,

Jessica Zhang

> 
>> +
>>           dsc->pic_width = mode->hdisplay;
>>           dsc->pic_height = mode->vdisplay;
>>           DBG("Mode %dx%d\n", dsc->pic_width, dsc->pic_height);
>> @@ -1759,7 +1766,7 @@ static int dsi_populate_dsc_params(struct 
>> msm_dsi_host *msm_host, struct drm_dsc
>>           return ret;
>>       }
>> -    dsc->initial_scale_value = 32;
>> +    drm_dsc_set_initial_scale_value(dsc);
>>       dsc->line_buf_depth = dsc->bits_per_component + 1;
>>       return drm_dsc_compute_rc_parameters(dsc);
>>
> 
> -- 
> With best wishes
> Dmitry
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 74d38f90398a..6a6218a9655f 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -28,6 +28,7 @@ 
 #include "dsi.xml.h"
 #include "sfpb.xml.h"
 #include "dsi_cfg.h"
+#include "msm_dsc_helper.h"
 #include "msm_kms.h"
 #include "msm_gem.h"
 #include "phy/dsi_phy.h"
@@ -848,7 +849,7 @@  static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
 	/* first calculate dsc parameters and then program
 	 * compress mode registers
 	 */
-	slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->slice_width);
+	slice_per_intf = msm_dsc_get_slice_per_intf(dsc, hdisplay);
 
 	/*
 	 * If slice_count is greater than slice_per_intf
@@ -858,7 +859,7 @@  static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
 	if (dsc->slice_count > slice_per_intf)
 		dsc->slice_count = 1;
 
-	total_bytes_per_intf = dsc->slice_chunk_size * slice_per_intf;
+	total_bytes_per_intf = msm_dsc_get_bytes_per_intf(dsc, hdisplay);
 
 	eol_byte_num = total_bytes_per_intf % 3;
 	pkt_per_line = slice_per_intf / dsc->slice_count;
@@ -936,6 +937,12 @@  static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
 			return;
 		}
 
+		if (!dsc->slice_width || (mode->hdisplay < dsc->slice_width)) {
+			pr_err("DSI: invalid slice width %d (pic_width: %d)\n",
+			       dsc->slice_width, mode->hdisplay);
+			return;
+		}
+
 		dsc->pic_width = mode->hdisplay;
 		dsc->pic_height = mode->vdisplay;
 		DBG("Mode %dx%d\n", dsc->pic_width, dsc->pic_height);
@@ -1759,7 +1766,7 @@  static int dsi_populate_dsc_params(struct msm_dsi_host *msm_host, struct drm_dsc
 		return ret;
 	}
 
-	dsc->initial_scale_value = 32;
+	drm_dsc_set_initial_scale_value(dsc);
 	dsc->line_buf_depth = dsc->bits_per_component + 1;
 
 	return drm_dsc_compute_rc_parameters(dsc);