diff mbox series

[V7,17/23] mmc: sdhci-uhs2: add uhs2_control() to initialise the interface

Message ID 20230331105546.13607-18-victor.shih@genesyslogic.com.tw (mailing list archive)
State New, archived
Headers show
Series Add support UHS-II for GL9755 | expand

Commit Message

Victor Shih March 31, 2023, 10:55 a.m. UTC
This is a sdhci version of mmc's uhs2_set_reg operation.
UHS-II interface (related registers) will be initialised here.

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
---
 drivers/mmc/host/sdhci-uhs2.c | 89 +++++++++++++++++++++++++++++++++++
 1 file changed, 89 insertions(+)

Comments

Adrian Hunter April 12, 2023, 1:11 p.m. UTC | #1
On 31/03/23 13:55, Victor Shih wrote:
> This is a sdhci version of mmc's uhs2_set_reg operation.
> UHS-II interface (related registers) will be initialised here.
> 
> Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> ---
>  drivers/mmc/host/sdhci-uhs2.c | 89 +++++++++++++++++++++++++++++++++++
>  1 file changed, 89 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> index 71ac76065886..6fe394b1a7be 100644
> --- a/drivers/mmc/host/sdhci-uhs2.c
> +++ b/drivers/mmc/host/sdhci-uhs2.c
> @@ -278,6 +278,49 @@ static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>  	sdhci_set_clock(host, host->clock);
>  }
>  
> +static void sdhci_uhs2_set_config(struct sdhci_host *host)
> +{
> +	u32 value;
> +	u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SETTINGS_PTR);
> +	u16 sdhci_uhs2_gen_set_reg = (sdhci_uhs2_set_ptr + 0);
> +	u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4);
> +	u16 sdhci_uhs2_tran_set_reg = (sdhci_uhs2_set_ptr + 8);
> +	u16 sdhci_uhs2_tran_set_1_reg = (sdhci_uhs2_set_ptr + 12);

Perhaps line these up and lose the parentheses.

	u16 sdhci_uhs2_gen_set_reg    = sdhci_uhs2_set_ptr;
	u16 sdhci_uhs2_phy_set_reg    = sdhci_uhs2_set_ptr + 4;
	u16 sdhci_uhs2_tran_set_reg   = sdhci_uhs2_set_ptr + 8;
	u16 sdhci_uhs2_tran_set_1_reg = sdhci_uhs2_set_ptr + 12;

> +
> +	/* Set Gen Settings */
> +	value = FIELD_PREP(SDHCI_UHS2_GEN_SETTINGS_N_LANES_MASK, host->mmc->uhs2_caps.n_lanes_set);
> +	sdhci_writel(host, value, sdhci_uhs2_gen_set_reg);
> +
> +	/* Set PHY Settings */
> +	value = FIELD_PREP(SDHCI_UHS2_PHY_N_LSS_DIR_MASK, host->mmc->uhs2_caps.n_lss_dir_set) |
> +		FIELD_PREP(SDHCI_UHS2_PHY_N_LSS_SYN_MASK, host->mmc->uhs2_caps.n_lss_sync_set);
> +	if (host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_B ||
> +	    host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_B_HD)
> +		value |= SDHCI_UHS2_PHY_SET_SPEED_B;
> +	sdhci_writel(host, value, sdhci_uhs2_phy_set_reg);
> +
> +	/* Set LINK-TRAN Settings */
> +	value = FIELD_PREP(SDHCI_UHS2_TRAN_RETRY_CNT_MASK, host->mmc->uhs2_caps.max_retry_set) |
> +		FIELD_PREP(SDHCI_UHS2_TRAN_N_FCU_MASK, host->mmc->uhs2_caps.n_fcu_set);
> +	sdhci_writel(host, value, sdhci_uhs2_tran_set_reg);
> +	sdhci_writel(host, host->mmc->uhs2_caps.n_data_gap_set, sdhci_uhs2_tran_set_1_reg);
> +}
> +
> +static int sdhci_uhs2_check_dormant(struct sdhci_host *host)
> +{
> +	u32 val;
> +	/* 100ms */
> +	int timeout = 100000;
> +
> +	if (read_poll_timeout_atomic(sdhci_readl, val, (val & SDHCI_UHS2_IN_DORMANT_STATE),
> +				     100, timeout, true, host, SDHCI_PRESENT_STATE)) {

atomic not needed

> +		pr_warn("%s: UHS2 IN_DORMANT fail in 100ms.\n", mmc_hostname(host->mmc));
> +		sdhci_dumpregs(host);
> +		return -EIO;
> +	}
> +	return 0;
> +}
> +
>  /*****************************************************************************\
>   *                                                                           *
>   * MMC callbacks                                                             *
> @@ -360,6 +403,51 @@ static int sdhci_uhs2_enable_clk(struct mmc_host *mmc)
>  	return 0;
>  }
>  
> +static int sdhci_uhs2_do_detect_init(struct mmc_host *mmc);
> +
> +static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op)
> +{
> +	struct sdhci_host *host = mmc_priv(mmc);
> +	struct mmc_ios *ios = &mmc->ios;
> +	int err = 0;
> +
> +	DBG("Begin uhs2 control, act %d.\n", op);
> +
> +	switch (op) {
> +	case UHS2_PHY_INIT:
> +		err = sdhci_uhs2_do_detect_init(mmc);
> +		break;
> +	case UHS2_SET_CONFIG:
> +		sdhci_uhs2_set_config(host);
> +		break;
> +	case UHS2_ENABLE_INT:
> +		sdhci_uhs2_clear_set_irqs(host, 0, SDHCI_INT_CARD_INT);
> +		break;
> +	case UHS2_DISABLE_INT:
> +		sdhci_uhs2_clear_set_irqs(host, SDHCI_INT_CARD_INT, 0);
> +		break;
> +	case UHS2_CHECK_DORMANT:
> +		err = sdhci_uhs2_check_dormant(host);
> +		break;
> +	case UHS2_DISABLE_CLK:
> +		err = sdhci_uhs2_disable_clk(mmc);
> +		break;
> +	case UHS2_ENABLE_CLK:
> +		err = sdhci_uhs2_enable_clk(mmc);
> +		break;
> +	case UHS2_SET_IOS:
> +		err = sdhci_uhs2_set_ios(mmc, ios);
> +		break;
> +	default:
> +		pr_err("%s: input sd uhs2 operation %d is wrong!\n",
> +		       mmc_hostname(host->mmc), op);
> +		err = -EIO;
> +		break;
> +	}
> +
> +	return err;
> +}
> +
>  /*****************************************************************************\
>   *                                                                           *
>   * Driver init/exit                                                          *
> @@ -487,6 +575,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
>  {
>  	host->mmc_host_ops.start_signal_voltage_switch =
>  		sdhci_uhs2_start_signal_voltage_switch;
> +	host->mmc_host_ops.uhs2_control = sdhci_uhs2_control;
>  
>  	return 0;
>  }
Victor Shih June 21, 2023, 10:29 a.m. UTC | #2
Hi, Adrian

On Wed, Apr 12, 2023 at 9:14 PM Adrian Hunter <adrian.hunter@intel.com> wrote:
>
> On 31/03/23 13:55, Victor Shih wrote:
> > This is a sdhci version of mmc's uhs2_set_reg operation.
> > UHS-II interface (related registers) will be initialised here.
> >
> > Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
> > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> > ---
> >  drivers/mmc/host/sdhci-uhs2.c | 89 +++++++++++++++++++++++++++++++++++
> >  1 file changed, 89 insertions(+)
> >
> > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> > index 71ac76065886..6fe394b1a7be 100644
> > --- a/drivers/mmc/host/sdhci-uhs2.c
> > +++ b/drivers/mmc/host/sdhci-uhs2.c
> > @@ -278,6 +278,49 @@ static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> >       sdhci_set_clock(host, host->clock);
> >  }
> >
> > +static void sdhci_uhs2_set_config(struct sdhci_host *host)
> > +{
> > +     u32 value;
> > +     u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SETTINGS_PTR);
> > +     u16 sdhci_uhs2_gen_set_reg = (sdhci_uhs2_set_ptr + 0);
> > +     u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4);
> > +     u16 sdhci_uhs2_tran_set_reg = (sdhci_uhs2_set_ptr + 8);
> > +     u16 sdhci_uhs2_tran_set_1_reg = (sdhci_uhs2_set_ptr + 12);
>
> Perhaps line these up and lose the parentheses.
>
>         u16 sdhci_uhs2_gen_set_reg    = sdhci_uhs2_set_ptr;
>         u16 sdhci_uhs2_phy_set_reg    = sdhci_uhs2_set_ptr + 4;
>         u16 sdhci_uhs2_tran_set_reg   = sdhci_uhs2_set_ptr + 8;
>         u16 sdhci_uhs2_tran_set_1_reg = sdhci_uhs2_set_ptr + 12;
>

I will update it to the V8 version.

> > +
> > +     /* Set Gen Settings */
> > +     value = FIELD_PREP(SDHCI_UHS2_GEN_SETTINGS_N_LANES_MASK, host->mmc->uhs2_caps.n_lanes_set);
> > +     sdhci_writel(host, value, sdhci_uhs2_gen_set_reg);
> > +
> > +     /* Set PHY Settings */
> > +     value = FIELD_PREP(SDHCI_UHS2_PHY_N_LSS_DIR_MASK, host->mmc->uhs2_caps.n_lss_dir_set) |
> > +             FIELD_PREP(SDHCI_UHS2_PHY_N_LSS_SYN_MASK, host->mmc->uhs2_caps.n_lss_sync_set);
> > +     if (host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_B ||
> > +         host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_B_HD)
> > +             value |= SDHCI_UHS2_PHY_SET_SPEED_B;
> > +     sdhci_writel(host, value, sdhci_uhs2_phy_set_reg);
> > +
> > +     /* Set LINK-TRAN Settings */
> > +     value = FIELD_PREP(SDHCI_UHS2_TRAN_RETRY_CNT_MASK, host->mmc->uhs2_caps.max_retry_set) |
> > +             FIELD_PREP(SDHCI_UHS2_TRAN_N_FCU_MASK, host->mmc->uhs2_caps.n_fcu_set);
> > +     sdhci_writel(host, value, sdhci_uhs2_tran_set_reg);
> > +     sdhci_writel(host, host->mmc->uhs2_caps.n_data_gap_set, sdhci_uhs2_tran_set_1_reg);
> > +}
> > +
> > +static int sdhci_uhs2_check_dormant(struct sdhci_host *host)
> > +{
> > +     u32 val;
> > +     /* 100ms */
> > +     int timeout = 100000;
> > +
> > +     if (read_poll_timeout_atomic(sdhci_readl, val, (val & SDHCI_UHS2_IN_DORMANT_STATE),
> > +                                  100, timeout, true, host, SDHCI_PRESENT_STATE)) {
>
> atomic not needed
>

I will update it to the V8 version.

> > +             pr_warn("%s: UHS2 IN_DORMANT fail in 100ms.\n", mmc_hostname(host->mmc));
> > +             sdhci_dumpregs(host);
> > +             return -EIO;
> > +     }
> > +     return 0;
> > +}
> > +
> >  /*****************************************************************************\
> >   *                                                                           *
> >   * MMC callbacks                                                             *
> > @@ -360,6 +403,51 @@ static int sdhci_uhs2_enable_clk(struct mmc_host *mmc)
> >       return 0;
> >  }
> >
> > +static int sdhci_uhs2_do_detect_init(struct mmc_host *mmc);
> > +
> > +static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op)
> > +{
> > +     struct sdhci_host *host = mmc_priv(mmc);
> > +     struct mmc_ios *ios = &mmc->ios;
> > +     int err = 0;
> > +
> > +     DBG("Begin uhs2 control, act %d.\n", op);
> > +
> > +     switch (op) {
> > +     case UHS2_PHY_INIT:
> > +             err = sdhci_uhs2_do_detect_init(mmc);
> > +             break;
> > +     case UHS2_SET_CONFIG:
> > +             sdhci_uhs2_set_config(host);
> > +             break;
> > +     case UHS2_ENABLE_INT:
> > +             sdhci_uhs2_clear_set_irqs(host, 0, SDHCI_INT_CARD_INT);
> > +             break;
> > +     case UHS2_DISABLE_INT:
> > +             sdhci_uhs2_clear_set_irqs(host, SDHCI_INT_CARD_INT, 0);
> > +             break;
> > +     case UHS2_CHECK_DORMANT:
> > +             err = sdhci_uhs2_check_dormant(host);
> > +             break;
> > +     case UHS2_DISABLE_CLK:
> > +             err = sdhci_uhs2_disable_clk(mmc);
> > +             break;
> > +     case UHS2_ENABLE_CLK:
> > +             err = sdhci_uhs2_enable_clk(mmc);
> > +             break;
> > +     case UHS2_SET_IOS:
> > +             err = sdhci_uhs2_set_ios(mmc, ios);
> > +             break;
> > +     default:
> > +             pr_err("%s: input sd uhs2 operation %d is wrong!\n",
> > +                    mmc_hostname(host->mmc), op);
> > +             err = -EIO;
> > +             break;
> > +     }
> > +
> > +     return err;
> > +}
> > +
> >  /*****************************************************************************\
> >   *                                                                           *
> >   * Driver init/exit                                                          *
> > @@ -487,6 +575,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
> >  {
> >       host->mmc_host_ops.start_signal_voltage_switch =
> >               sdhci_uhs2_start_signal_voltage_switch;
> > +     host->mmc_host_ops.uhs2_control = sdhci_uhs2_control;
> >
> >       return 0;
> >  }
>

Thanks, Victor Shih
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
index 71ac76065886..6fe394b1a7be 100644
--- a/drivers/mmc/host/sdhci-uhs2.c
+++ b/drivers/mmc/host/sdhci-uhs2.c
@@ -278,6 +278,49 @@  static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	sdhci_set_clock(host, host->clock);
 }
 
+static void sdhci_uhs2_set_config(struct sdhci_host *host)
+{
+	u32 value;
+	u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SETTINGS_PTR);
+	u16 sdhci_uhs2_gen_set_reg = (sdhci_uhs2_set_ptr + 0);
+	u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4);
+	u16 sdhci_uhs2_tran_set_reg = (sdhci_uhs2_set_ptr + 8);
+	u16 sdhci_uhs2_tran_set_1_reg = (sdhci_uhs2_set_ptr + 12);
+
+	/* Set Gen Settings */
+	value = FIELD_PREP(SDHCI_UHS2_GEN_SETTINGS_N_LANES_MASK, host->mmc->uhs2_caps.n_lanes_set);
+	sdhci_writel(host, value, sdhci_uhs2_gen_set_reg);
+
+	/* Set PHY Settings */
+	value = FIELD_PREP(SDHCI_UHS2_PHY_N_LSS_DIR_MASK, host->mmc->uhs2_caps.n_lss_dir_set) |
+		FIELD_PREP(SDHCI_UHS2_PHY_N_LSS_SYN_MASK, host->mmc->uhs2_caps.n_lss_sync_set);
+	if (host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_B ||
+	    host->mmc->ios.timing == MMC_TIMING_UHS2_SPEED_B_HD)
+		value |= SDHCI_UHS2_PHY_SET_SPEED_B;
+	sdhci_writel(host, value, sdhci_uhs2_phy_set_reg);
+
+	/* Set LINK-TRAN Settings */
+	value = FIELD_PREP(SDHCI_UHS2_TRAN_RETRY_CNT_MASK, host->mmc->uhs2_caps.max_retry_set) |
+		FIELD_PREP(SDHCI_UHS2_TRAN_N_FCU_MASK, host->mmc->uhs2_caps.n_fcu_set);
+	sdhci_writel(host, value, sdhci_uhs2_tran_set_reg);
+	sdhci_writel(host, host->mmc->uhs2_caps.n_data_gap_set, sdhci_uhs2_tran_set_1_reg);
+}
+
+static int sdhci_uhs2_check_dormant(struct sdhci_host *host)
+{
+	u32 val;
+	/* 100ms */
+	int timeout = 100000;
+
+	if (read_poll_timeout_atomic(sdhci_readl, val, (val & SDHCI_UHS2_IN_DORMANT_STATE),
+				     100, timeout, true, host, SDHCI_PRESENT_STATE)) {
+		pr_warn("%s: UHS2 IN_DORMANT fail in 100ms.\n", mmc_hostname(host->mmc));
+		sdhci_dumpregs(host);
+		return -EIO;
+	}
+	return 0;
+}
+
 /*****************************************************************************\
  *                                                                           *
  * MMC callbacks                                                             *
@@ -360,6 +403,51 @@  static int sdhci_uhs2_enable_clk(struct mmc_host *mmc)
 	return 0;
 }
 
+static int sdhci_uhs2_do_detect_init(struct mmc_host *mmc);
+
+static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct mmc_ios *ios = &mmc->ios;
+	int err = 0;
+
+	DBG("Begin uhs2 control, act %d.\n", op);
+
+	switch (op) {
+	case UHS2_PHY_INIT:
+		err = sdhci_uhs2_do_detect_init(mmc);
+		break;
+	case UHS2_SET_CONFIG:
+		sdhci_uhs2_set_config(host);
+		break;
+	case UHS2_ENABLE_INT:
+		sdhci_uhs2_clear_set_irqs(host, 0, SDHCI_INT_CARD_INT);
+		break;
+	case UHS2_DISABLE_INT:
+		sdhci_uhs2_clear_set_irqs(host, SDHCI_INT_CARD_INT, 0);
+		break;
+	case UHS2_CHECK_DORMANT:
+		err = sdhci_uhs2_check_dormant(host);
+		break;
+	case UHS2_DISABLE_CLK:
+		err = sdhci_uhs2_disable_clk(mmc);
+		break;
+	case UHS2_ENABLE_CLK:
+		err = sdhci_uhs2_enable_clk(mmc);
+		break;
+	case UHS2_SET_IOS:
+		err = sdhci_uhs2_set_ios(mmc, ios);
+		break;
+	default:
+		pr_err("%s: input sd uhs2 operation %d is wrong!\n",
+		       mmc_hostname(host->mmc), op);
+		err = -EIO;
+		break;
+	}
+
+	return err;
+}
+
 /*****************************************************************************\
  *                                                                           *
  * Driver init/exit                                                          *
@@ -487,6 +575,7 @@  static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
 {
 	host->mmc_host_ops.start_signal_voltage_switch =
 		sdhci_uhs2_start_signal_voltage_switch;
+	host->mmc_host_ops.uhs2_control = sdhci_uhs2_control;
 
 	return 0;
 }