Message ID | 20230413012348.GA2492327@demorgan (mailing list archive) |
---|---|
State | Changes Requested |
Headers | show |
Series | [v4,resend] ip.7: Add Special and Reserved IP Addresses section | expand |
Context | Check | Description |
---|---|---|
netdev/tree_selection | success | Not a local patch |
Hi Seth, On 4/13/23 03:23, Seth David Schoen wrote: > Break out the discussion of special and reserved IPv4 addresses > into a subsection, and briefly describe three cases in which > Linux no longer treats addresses specially, where other systems > do or did. > > The divergences in Linux's behavior mentioned in this patch were > introduced at > > unicast 240/4 (since 2.6.25): > commit 1e637c74b0f84eaca02b914c0b8c6f67276e9697 > Author: Jan Engelhardt <jengelh@computergmbh.de> > Date: Mon Jan 21 03:18:08 2008 -0800 > > unicast 0/8 (since 5.3): > commit 96125bf9985a75db00496dd2bc9249b777d2b19b > Author: Dave Taht <dave.taht@gmail.com> > Date: Sat Jun 22 10:07:34 2019 -0700 > > unicast subnet lowest address (since 5.14): > commit 58fee5fc83658aaacf60246aeab738946a9ba516 > Merge: 77091933e453 6101ca0384e3 > Author: David S. Miller <davem@davemloft.net> > Date: Mon May 17 13:47:58 2021 -0700 > > Signed-off-by: Seth David Schoen <schoen@loyalty.org> > Suggested-by: John Gilmore <gnu@toad.com> > --- > man7/ip.7 | 38 +++++++++++++++++++++++++++++++++++--- > 1 file changed, 35 insertions(+), 3 deletions(-) > > diff --git a/man7/ip.7 b/man7/ip.7 > index f69af1b32..94de21979 100644 > --- a/man7/ip.7 > +++ b/man7/ip.7 > @@ -237,6 +237,7 @@ In particular, this means that you need to call > on the number that is assigned to a port. > All address/port manipulation > functions in the standard library work in network byte order. > +.SS Special and reserved addresses > .PP > There are several special addresses: > .B INADDR_LOOPBACK > @@ -244,12 +245,43 @@ There are several special addresses: > always refers to the local host via the loopback device; > .B INADDR_ANY > (0.0.0.0) > -means any address for binding; > +means any address for socket binding; > .B INADDR_BROADCAST > (255.255.255.255) > -means any host and has the same effect on bind as > +has the same effect on socket binding as > .B INADDR_ANY > -for historical reasons. > +for historical reasons. A packet addressed to Please use semantic newlines. See man-pages(7): Use semantic newlines In the source of a manual page, new sentences should be started on new lines, long sentences should be split into lines at clause breaks (commas, semicolons, colons, and so on), and long clauses should be split at phrase boundaries. This convention, sometimes known as "semantic newlines", makes it easier to see the effect of patches, which often operate at the level of in‐ dividual sentences, clauses, or phrases. > +.B INADDR_BROADCAST > +through a socket which has > +.B SO_BROADCAST > +set will be broadcast to all hosts on the local network segment, as > +long as the link is broadcast-capable. > +.PP > +On any locally-attached IP subnet with a link type that supports > +broadcasts, the highest-numbered address (e.g., the .255 address on a > +subnet with netmask 255.255.255.0) is designated as a broadcast address. > +This "broadcast address" cannot usefully be assigned to an interface, and > +can only be addressed with a socket on which the > +.B SO_BROADCAST > +option has been set. > +Internet standards have historically also reserved the lowest-numbered > +address (e.g., the .0 address on a subnet with netmask 255.255.255.0) > +for broadcast, though they call it "obsolete" for this purpose. Since > +Linux 5.14, it is treated as an ordinary unicast address. > +.PP > +Internet standards have also traditionally reserved various addresses > +for particular uses, though Linux no longer treats some of these > +specially. Addresses in the ranges 0.0.0.1 through 0.255.255.255 and > +240.0.0.0 through 255.255.255.254 (0/8 and 240/4) are reserved globally. > +Since Linux 5.3 and Linux 2.6.245, respectively, the 0/8 and 240/4 > +addresses are treated as ordinary unicast addresses. Systems that follow > +the traditional behaviors may not interoperate with these historically > +reserved addresses. > +.PP > +All addresses from 127.0.0.1 through 127.255.255.254 > +are treated as loopback addresses akin to the standardized > +local loopback address 127.0.0.1, while addresses in 224.0.0.0 through > +239.255.255.255 (224/4) are dedicated to multicast use. Maybe it would be interesting to use tagged paragraphs (.TP), so that it's reasy to see at a first glance the reserved values? Something like: Special and reserved addresses INADDR_LOOPBACK 127.0.0.1 INADDR_LOOPBACK (127.0.0.1) always refers to the local host via the loopback device; INADDR_ANY 0.0.0.0 INADDR_ANY (0.0.0.0) means any address for socket binding; INADDR_BROADCAST 255.255.255.255 INADDR_BROADCAST (255.255.255.255) has the same effect on socket binding as INADDR_ANY for historical reasons. A packet addressed to INADDR_BROADCAST through a socket which has SO_BROADCAST set will be broadcast to all hosts on the local network segment, as long as the link is broadcast‐capable. Highest-numbered address Lowest-numbered address On any locally‐attached IP subnet with a link type that supports broadcasts, the highest‐numbered address (e.g., the .255 address on a subnet with netmask 255.255.255.0) is designated as a broadcast address. This "broadcast address" cannot usefully be assigned to an interface, and can only be addressed with a socket on which the SO_BROADCAST option has been set. Internet standards have historically also reserved the lowest‐numbered ad‐ dress (e.g., the .0 address on a subnet with netmask 255.255.255.0) for broadcast, though they call it "obso‐ lete" for this purpose. Since Linux 5.14, it is treated as an ordinary unicast address. Internet standards have also traditionally reserved vari‐ ous addresses for particular uses, though Linux no longer treats some of these specially. [0.0.0.1, 0.255.255.255] [240.0.0.0, 255.255.255.254] Addresses in these ranges (0/8 and 240/4) are reserved globally. Since Linux 5.3 and Linux 2.6.245, respectively, the 0/8 and 240/4 addresses are treated as ordinary unicast addresses. Systems that follow the traditional behaviors may not interoperate with these historically reserved addresses. [127.0.0.1, 127.255.255.254] Addresses in this range are treated as loopback addresses akin to the standardized local loopback address 127.0.0.1. [224.0.0.0, 239.255.255.255] Addresses in this range (224/4) are dedicated to multicast use. Cheers, Alex > .SS Socket options > IP supports some protocol-specific socket options that can be set with > .BR setsockopt (2)
diff --git a/man7/ip.7 b/man7/ip.7 index f69af1b32..94de21979 100644 --- a/man7/ip.7 +++ b/man7/ip.7 @@ -237,6 +237,7 @@ In particular, this means that you need to call on the number that is assigned to a port. All address/port manipulation functions in the standard library work in network byte order. +.SS Special and reserved addresses .PP There are several special addresses: .B INADDR_LOOPBACK @@ -244,12 +245,43 @@ There are several special addresses: always refers to the local host via the loopback device; .B INADDR_ANY (0.0.0.0) -means any address for binding; +means any address for socket binding; .B INADDR_BROADCAST (255.255.255.255) -means any host and has the same effect on bind as +has the same effect on socket binding as .B INADDR_ANY -for historical reasons. +for historical reasons. A packet addressed to +.B INADDR_BROADCAST +through a socket which has +.B SO_BROADCAST +set will be broadcast to all hosts on the local network segment, as +long as the link is broadcast-capable. +.PP +On any locally-attached IP subnet with a link type that supports +broadcasts, the highest-numbered address (e.g., the .255 address on a +subnet with netmask 255.255.255.0) is designated as a broadcast address. +This "broadcast address" cannot usefully be assigned to an interface, and +can only be addressed with a socket on which the +.B SO_BROADCAST +option has been set. +Internet standards have historically also reserved the lowest-numbered +address (e.g., the .0 address on a subnet with netmask 255.255.255.0) +for broadcast, though they call it "obsolete" for this purpose. Since +Linux 5.14, it is treated as an ordinary unicast address. +.PP +Internet standards have also traditionally reserved various addresses +for particular uses, though Linux no longer treats some of these +specially. Addresses in the ranges 0.0.0.1 through 0.255.255.255 and +240.0.0.0 through 255.255.255.254 (0/8 and 240/4) are reserved globally. +Since Linux 5.3 and Linux 2.6.245, respectively, the 0/8 and 240/4 +addresses are treated as ordinary unicast addresses. Systems that follow +the traditional behaviors may not interoperate with these historically +reserved addresses. +.PP +All addresses from 127.0.0.1 through 127.255.255.254 +are treated as loopback addresses akin to the standardized +local loopback address 127.0.0.1, while addresses in 224.0.0.0 through +239.255.255.255 (224/4) are dedicated to multicast use. .SS Socket options IP supports some protocol-specific socket options that can be set with .BR setsockopt (2)
Break out the discussion of special and reserved IPv4 addresses into a subsection, and briefly describe three cases in which Linux no longer treats addresses specially, where other systems do or did. The divergences in Linux's behavior mentioned in this patch were introduced at unicast 240/4 (since 2.6.25): commit 1e637c74b0f84eaca02b914c0b8c6f67276e9697 Author: Jan Engelhardt <jengelh@computergmbh.de> Date: Mon Jan 21 03:18:08 2008 -0800 unicast 0/8 (since 5.3): commit 96125bf9985a75db00496dd2bc9249b777d2b19b Author: Dave Taht <dave.taht@gmail.com> Date: Sat Jun 22 10:07:34 2019 -0700 unicast subnet lowest address (since 5.14): commit 58fee5fc83658aaacf60246aeab738946a9ba516 Merge: 77091933e453 6101ca0384e3 Author: David S. Miller <davem@davemloft.net> Date: Mon May 17 13:47:58 2021 -0700 Signed-off-by: Seth David Schoen <schoen@loyalty.org> Suggested-by: John Gilmore <gnu@toad.com> --- man7/ip.7 | 38 +++++++++++++++++++++++++++++++++++--- 1 file changed, 35 insertions(+), 3 deletions(-)