diff mbox series

[v2,03/12] ARM: exynos: Re-introduce Exynos4212 support

Message ID 20230416133422.1949-4-aweber.kernel@gmail.com (mailing list archive)
State Not Applicable, archived
Headers show
Series Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards | expand

Commit Message

Artur Weber April 16, 2023, 1:34 p.m. UTC
The platform was originally dropped in commit bca9085e0ae9 ("ARM:
dts: exynos: remove Exynos4212 support (dead code)"), as there were
no boards using it.

We will be adding a device that uses it, so add it back.

This effectively reverts commit 9e43eca3c874 ("ARM: EXYNOS: Remove
Exynos4212 related dead code").

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
 arch/arm/mach-exynos/Kconfig    | 5 +++++
 arch/arm/mach-exynos/common.h   | 8 ++++++++
 arch/arm/mach-exynos/exynos.c   | 2 ++
 arch/arm/mach-exynos/firmware.c | 8 +++++++-
 arch/arm/mach-exynos/pm.c       | 2 +-
 arch/arm/mach-exynos/suspend.c  | 4 ++++
 6 files changed, 27 insertions(+), 2 deletions(-)

Comments

Krzysztof Kozlowski April 16, 2023, 6 p.m. UTC | #1
On 16/04/2023 15:34, Artur Weber wrote:
> The platform was originally dropped in commit bca9085e0ae9 ("ARM:
> dts: exynos: remove Exynos4212 support (dead code)"), as there were
> no boards using it.

This is not accurate. Platform was not dropped with that commit. This
was only DTS. I propose to drop it and focus on commit which you are
reverting.

> 
> We will be adding a device that uses it, so add it back.
> 
> This effectively reverts commit 9e43eca3c874 ("ARM: EXYNOS: Remove
> Exynos4212 related dead code").
> 
> Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
> ---
>  arch/arm/mach-exynos/Kconfig    | 5 +++++
>  arch/arm/mach-exynos/common.h   | 8 ++++++++
>  arch/arm/mach-exynos/exynos.c   | 2 ++
>  arch/arm/mach-exynos/firmware.c | 8 +++++++-
>  arch/arm/mach-exynos/pm.c       | 2 +-
>  arch/arm/mach-exynos/suspend.c  | 4 ++++
>  6 files changed, 27 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index 4d3b40e4049a..b3d5df5225fe 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -78,6 +78,11 @@ config CPU_EXYNOS4210
>  	default y
>  	depends on ARCH_EXYNOS4
>  
> +config SOC_EXYNOS4212
> +	bool "Samsung Exynos4212"
> +	default y
> +	depends on ARCH_EXYNOS4
> +
>  config SOC_EXYNOS4412
>  	bool "Samsung Exynos4412"
>  	default y
> diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
> index 29eb075b24a4..c9e85d33c309 100644
> --- a/arch/arm/mach-exynos/common.h
> +++ b/arch/arm/mach-exynos/common.h
> @@ -15,6 +15,7 @@
>  #define EXYNOS3_SOC_MASK	0xFFFFF000
>  
>  #define EXYNOS4210_CPU_ID	0x43210000
> +#define EXYNOS4212_CPU_ID	0x43220000
>  #define EXYNOS4412_CPU_ID	0xE4412200
>  #define EXYNOS4_CPU_MASK	0xFFFE0000
>  
> @@ -34,6 +35,7 @@ static inline int is_samsung_##name(void)	\
>  
>  IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
>  IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
> +IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
>  IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
>  IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
>  IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
> @@ -52,6 +54,12 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
>  # define soc_is_exynos4210()	0
>  #endif
>  
> +#if defined(CONFIG_SOC_EXYNOS4212)
> +# define soc_is_exynos4212()	is_samsung_exynos4212()
> +#else
> +# define soc_is_exynos4212()	0
> +#endif
> +
>  #if defined(CONFIG_SOC_EXYNOS4412)
>  # define soc_is_exynos4412()	is_samsung_exynos4412()
>  #else
> diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
> index 51a247ca4da8..5671621f1661 100644
> --- a/arch/arm/mach-exynos/exynos.c
> +++ b/arch/arm/mach-exynos/exynos.c
> @@ -178,6 +178,7 @@ static void __init exynos_dt_machine_init(void)
>  		exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
>  #endif
>  	if (of_machine_is_compatible("samsung,exynos4210") ||
> +	    of_machine_is_compatible("samsung,exynos4212") ||
>  	    (of_machine_is_compatible("samsung,exynos4412") &&
>  	     (of_machine_is_compatible("samsung,trats2") ||
>  		  of_machine_is_compatible("samsung,midas") ||
> @@ -192,6 +193,7 @@ static char const *const exynos_dt_compat[] __initconst = {
>  	"samsung,exynos3250",
>  	"samsung,exynos4",
>  	"samsung,exynos4210",
> +	"samsung,exynos4212",
>  	"samsung,exynos4412",
>  	"samsung,exynos5",
>  	"samsung,exynos5250",
> diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
> index 2da5b60b59e2..110c8064ee64 100644
> --- a/arch/arm/mach-exynos/firmware.c
> +++ b/arch/arm/mach-exynos/firmware.c
> @@ -63,12 +63,18 @@ static int exynos_cpu_boot(int cpu)
>  	 *
>  	 * On Exynos5 devices the call is ignored by trustzone firmware.
>  	 */
> -	if (!soc_is_exynos4210() && !soc_is_exynos4412())
> +	if (!soc_is_exynos4210() && !soc_is_exynos4412() &&
> +	    !soc_is_exynos4212())

Keep them ordered, so 4210, 4212 and 4412.

>  		return 0;
>  
>  	/*
>  	 * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
> +	 * But, Exynos4212 has only one secondary CPU so second parameter
> +	 * isn't used for informing secure firmware about CPU id.
>  	 */
> +	if (soc_is_exynos4212())
> +		cpu = 0;
> +
>  	exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
>  	return 0;
>  }
> diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
> index 30f4e55bf39e..9b6db04e4e34 100644
> --- a/arch/arm/mach-exynos/pm.c
> +++ b/arch/arm/mach-exynos/pm.c
> @@ -161,7 +161,7 @@ void exynos_enter_aftr(void)
>  
>  	exynos_pm_central_suspend();
>  
> -	if (soc_is_exynos4412()) {
> +	if (soc_is_exynos4412() || soc_is_exynos4212()) {

Ditto

Best regards,
Krzysztof
Henrik Grimler April 19, 2023, 8:24 p.m. UTC | #2
Hi Artur,

On Sun, Apr 16, 2023 at 03:34:13PM +0200, Artur Weber wrote:
> The platform was originally dropped in commit bca9085e0ae9 ("ARM:
> dts: exynos: remove Exynos4212 support (dead code)"), as there were
> no boards using it.
> 
> We will be adding a device that uses it, so add it back.
> 
> This effectively reverts commit 9e43eca3c874 ("ARM: EXYNOS: Remove
> Exynos4212 related dead code").
> 
> Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
> ---
>  arch/arm/mach-exynos/Kconfig    | 5 +++++
>  arch/arm/mach-exynos/common.h   | 8 ++++++++
>  arch/arm/mach-exynos/exynos.c   | 2 ++
>  arch/arm/mach-exynos/firmware.c | 8 +++++++-
>  arch/arm/mach-exynos/pm.c       | 2 +-
>  arch/arm/mach-exynos/suspend.c  | 4 ++++
>  6 files changed, 27 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index 4d3b40e4049a..b3d5df5225fe 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -78,6 +78,11 @@ config CPU_EXYNOS4210
>  	default y
>  	depends on ARCH_EXYNOS4
>  
> +config SOC_EXYNOS4212
> +	bool "Samsung Exynos4212"
> +	default y
> +	depends on ARCH_EXYNOS4
> +
>  config SOC_EXYNOS4412
>  	bool "Samsung Exynos4412"
>  	default y
> diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
> index 29eb075b24a4..c9e85d33c309 100644
> --- a/arch/arm/mach-exynos/common.h
> +++ b/arch/arm/mach-exynos/common.h
> @@ -15,6 +15,7 @@
>  #define EXYNOS3_SOC_MASK	0xFFFFF000
>  
>  #define EXYNOS4210_CPU_ID	0x43210000
> +#define EXYNOS4212_CPU_ID	0x43220000
>  #define EXYNOS4412_CPU_ID	0xE4412200
>  #define EXYNOS4_CPU_MASK	0xFFFE0000
>  
> @@ -34,6 +35,7 @@ static inline int is_samsung_##name(void)	\
>  
>  IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
>  IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
> +IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
>  IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
>  IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
>  IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
> @@ -52,6 +54,12 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
>  # define soc_is_exynos4210()	0
>  #endif
>  
> +#if defined(CONFIG_SOC_EXYNOS4212)
> +# define soc_is_exynos4212()	is_samsung_exynos4212()
> +#else
> +# define soc_is_exynos4212()	0
> +#endif
> +
>  #if defined(CONFIG_SOC_EXYNOS4412)
>  # define soc_is_exynos4412()	is_samsung_exynos4412()
>  #else
> diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
> index 51a247ca4da8..5671621f1661 100644
> --- a/arch/arm/mach-exynos/exynos.c
> +++ b/arch/arm/mach-exynos/exynos.c
> @@ -178,6 +178,7 @@ static void __init exynos_dt_machine_init(void)
>  		exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
>  #endif
>  	if (of_machine_is_compatible("samsung,exynos4210") ||
> +	    of_machine_is_compatible("samsung,exynos4212") ||
>  	    (of_machine_is_compatible("samsung,exynos4412") &&
>  	     (of_machine_is_compatible("samsung,trats2") ||
>  		  of_machine_is_compatible("samsung,midas") ||
> @@ -192,6 +193,7 @@ static char const *const exynos_dt_compat[] __initconst = {
>  	"samsung,exynos3250",
>  	"samsung,exynos4",
>  	"samsung,exynos4210",
> +	"samsung,exynos4212",
>  	"samsung,exynos4412",
>  	"samsung,exynos5",
>  	"samsung,exynos5250",
> diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
> index 2da5b60b59e2..110c8064ee64 100644
> --- a/arch/arm/mach-exynos/firmware.c
> +++ b/arch/arm/mach-exynos/firmware.c
> @@ -63,12 +63,18 @@ static int exynos_cpu_boot(int cpu)
>  	 *
>  	 * On Exynos5 devices the call is ignored by trustzone firmware.
>  	 */
> -	if (!soc_is_exynos4210() && !soc_is_exynos4412())
> +	if (!soc_is_exynos4210() && !soc_is_exynos4412() &&
> +	    !soc_is_exynos4212())

Seems more logical to have 4212 before 4412 here.

>  		return 0;
>  
>  	/*
>  	 * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
> +	 * But, Exynos4212 has only one secondary CPU so second parameter
> +	 * isn't used for informing secure firmware about CPU id.
>  	 */
> +	if (soc_is_exynos4212())
> +		cpu = 0;

Is it necessary to set cpu = 0?  Are there any obvious issues without
it (like second cpu not being brought up)?  It seems vendor kernel
does this for both exynos4210 and exynos4212 [1], but mainline has not
done this for exynos4210 and there has been no reported issues on for
that platform as far as I know.

The assembly that handles SMC_CMD_CPU1BOOT in sboot.bin from firmware
version T310XXSBQB2 is identical to what is found in sboot.bin from
exynos4412-galaxy-s3, and it uses the cpu arg in both cases, so seems
likely that we need this and I am mostly asking out of curiosity.

[1] https://github.com/krzk/linux-vendor-backup/blob/mokee/android-3.4-samsung-galaxy-tab-s-10.5-sm-t805-exynos5420/arch/arm/mach-exynos/platsmp.c#L225-L229

Best regards,
Henrik Grimler

>  	exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
>  	return 0;
>  }
> diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
> index 30f4e55bf39e..9b6db04e4e34 100644
> --- a/arch/arm/mach-exynos/pm.c
> +++ b/arch/arm/mach-exynos/pm.c
> @@ -161,7 +161,7 @@ void exynos_enter_aftr(void)
>  
>  	exynos_pm_central_suspend();
>  
> -	if (soc_is_exynos4412()) {
> +	if (soc_is_exynos4412() || soc_is_exynos4212()) {
>  		/* Setting SEQ_OPTION register */
>  		pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
>  			       S5P_CENTRAL_SEQ_OPTION);
> diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
> index 3bf14ca78b62..df1e10033f90 100644
> --- a/arch/arm/mach-exynos/suspend.c
> +++ b/arch/arm/mach-exynos/suspend.c
> @@ -231,6 +231,7 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
>  
>  EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu");
>  EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");
> +EXYNOS_PMU_IRQ(exynos4212_pmu_irq, "samsung,exynos4212-pmu");
>  EXYNOS_PMU_IRQ(exynos4412_pmu_irq, "samsung,exynos4412-pmu");
>  EXYNOS_PMU_IRQ(exynos5250_pmu_irq, "samsung,exynos5250-pmu");
>  EXYNOS_PMU_IRQ(exynos5420_pmu_irq, "samsung,exynos5420-pmu");
> @@ -640,6 +641,9 @@ static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = {
>  	}, {
>  		.compatible = "samsung,exynos4210-pmu",
>  		.data = &exynos4_pm_data,
> +	}, {
> +		.compatible = "samsung,exynos4212-pmu",
> +		.data = &exynos4_pm_data,
>  	}, {
>  		.compatible = "samsung,exynos4412-pmu",
>  		.data = &exynos4_pm_data,
> -- 
> 2.40.0
>
Artur Weber April 29, 2023, 3:55 p.m. UTC | #3
On 19/04/2023 22:24, Henrik Grimler wrote:
>>  	/*
>>  	 * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
>> +	 * But, Exynos4212 has only one secondary CPU so second parameter
>> +	 * isn't used for informing secure firmware about CPU id.
>>  	 */
>> +	if (soc_is_exynos4212())
>> +		cpu = 0;
> 
> Is it necessary to set cpu = 0?  Are there any obvious issues without
> it (like second cpu not being brought up)?

Just tested this; looks like it's required here, without it the second
core fails to start up:

[    0.064277] smp: Bringing up secondary CPUs ...
[    1.067163] CPU1: failed to boot: -110
[    1.069683] smp: Brought up 1 node, 1 CPU
[    1.072470] SMP: Total of 1 processors activated (48.00 BogoMIPS).

SBOOT on my tablet claims the version is T310XXSBQB2, so it should match
with the one you checked.

Best regards
Artur Weber
diff mbox series

Patch

diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 4d3b40e4049a..b3d5df5225fe 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -78,6 +78,11 @@  config CPU_EXYNOS4210
 	default y
 	depends on ARCH_EXYNOS4
 
+config SOC_EXYNOS4212
+	bool "Samsung Exynos4212"
+	default y
+	depends on ARCH_EXYNOS4
+
 config SOC_EXYNOS4412
 	bool "Samsung Exynos4412"
 	default y
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 29eb075b24a4..c9e85d33c309 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -15,6 +15,7 @@ 
 #define EXYNOS3_SOC_MASK	0xFFFFF000
 
 #define EXYNOS4210_CPU_ID	0x43210000
+#define EXYNOS4212_CPU_ID	0x43220000
 #define EXYNOS4412_CPU_ID	0xE4412200
 #define EXYNOS4_CPU_MASK	0xFFFE0000
 
@@ -34,6 +35,7 @@  static inline int is_samsung_##name(void)	\
 
 IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
 IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
 IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
@@ -52,6 +54,12 @@  IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
 # define soc_is_exynos4210()	0
 #endif
 
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212()	is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212()	0
+#endif
+
 #if defined(CONFIG_SOC_EXYNOS4412)
 # define soc_is_exynos4412()	is_samsung_exynos4412()
 #else
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 51a247ca4da8..5671621f1661 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -178,6 +178,7 @@  static void __init exynos_dt_machine_init(void)
 		exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
 #endif
 	if (of_machine_is_compatible("samsung,exynos4210") ||
+	    of_machine_is_compatible("samsung,exynos4212") ||
 	    (of_machine_is_compatible("samsung,exynos4412") &&
 	     (of_machine_is_compatible("samsung,trats2") ||
 		  of_machine_is_compatible("samsung,midas") ||
@@ -192,6 +193,7 @@  static char const *const exynos_dt_compat[] __initconst = {
 	"samsung,exynos3250",
 	"samsung,exynos4",
 	"samsung,exynos4210",
+	"samsung,exynos4212",
 	"samsung,exynos4412",
 	"samsung,exynos5",
 	"samsung,exynos5250",
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 2da5b60b59e2..110c8064ee64 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -63,12 +63,18 @@  static int exynos_cpu_boot(int cpu)
 	 *
 	 * On Exynos5 devices the call is ignored by trustzone firmware.
 	 */
-	if (!soc_is_exynos4210() && !soc_is_exynos4412())
+	if (!soc_is_exynos4210() && !soc_is_exynos4412() &&
+	    !soc_is_exynos4212())
 		return 0;
 
 	/*
 	 * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
+	 * But, Exynos4212 has only one secondary CPU so second parameter
+	 * isn't used for informing secure firmware about CPU id.
 	 */
+	if (soc_is_exynos4212())
+		cpu = 0;
+
 	exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
 	return 0;
 }
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 30f4e55bf39e..9b6db04e4e34 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -161,7 +161,7 @@  void exynos_enter_aftr(void)
 
 	exynos_pm_central_suspend();
 
-	if (soc_is_exynos4412()) {
+	if (soc_is_exynos4412() || soc_is_exynos4212()) {
 		/* Setting SEQ_OPTION register */
 		pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
 			       S5P_CENTRAL_SEQ_OPTION);
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 3bf14ca78b62..df1e10033f90 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -231,6 +231,7 @@  static int __init exynos_pmu_irq_init(struct device_node *node,
 
 EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu");
 EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");
+EXYNOS_PMU_IRQ(exynos4212_pmu_irq, "samsung,exynos4212-pmu");
 EXYNOS_PMU_IRQ(exynos4412_pmu_irq, "samsung,exynos4412-pmu");
 EXYNOS_PMU_IRQ(exynos5250_pmu_irq, "samsung,exynos5250-pmu");
 EXYNOS_PMU_IRQ(exynos5420_pmu_irq, "samsung,exynos5420-pmu");
@@ -640,6 +641,9 @@  static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = {
 	}, {
 		.compatible = "samsung,exynos4210-pmu",
 		.data = &exynos4_pm_data,
+	}, {
+		.compatible = "samsung,exynos4212-pmu",
+		.data = &exynos4_pm_data,
 	}, {
 		.compatible = "samsung,exynos4412-pmu",
 		.data = &exynos4_pm_data,