| Message ID | 20230418074700.1083505-7-rick.wertenbroek@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | PCI: rockchip: Fix RK3399 PCIe endpoint controller driver | expand |
On 18/04/2023 09:46, Rick Wertenbroek wrote: > Update the example in the documentation to a valid example. > Address for mem-base was invalid, it pointed to address > 0x8000'0000 which is the upper region of the DDR which > is not necessarily populated depending on the board. > This address should point to the base of the memory > window region of the controller which is 0xfa00'0000. > Add missing pinctrl. > > Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> > --- > .../devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml > index 88386a6d7011..6b62f6f58efe 100644 > --- a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml > +++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml > @@ -47,7 +47,7 @@ examples: > > pcie-ep@f8000000 { > compatible = "rockchip,rk3399-pcie-ep"; > - reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>; > + reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0xfa000000 0x0 0x2000000>; > reg-names = "apb-base", "mem-base"; > clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, > <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; > @@ -63,6 +63,8 @@ examples: > phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>; > phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; > rockchip,max-outbound-regions = <16>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie_clkreqnb_cpm>; This is just example of the binding, you do not need to fill all unrelated (generic) properties like pinctrl. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Wed, Apr 19, 2023 at 10:01:25PM +0200, Krzysztof Kozlowski wrote: > On 18/04/2023 09:46, Rick Wertenbroek wrote: > > Update the example in the documentation to a valid example. > > Address for mem-base was invalid, it pointed to address > > 0x8000'0000 which is the upper region of the DDR which > > is not necessarily populated depending on the board. > > This address should point to the base of the memory > > window region of the controller which is 0xfa00'0000. > > Add missing pinctrl. > > > > Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> > > --- > > .../devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml | 4 +++- > > 1 file changed, 3 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml > > index 88386a6d7011..6b62f6f58efe 100644 > > --- a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml > > +++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml > > @@ -47,7 +47,7 @@ examples: > > > > pcie-ep@f8000000 { > > compatible = "rockchip,rk3399-pcie-ep"; > > - reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>; > > + reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0xfa000000 0x0 0x2000000>; > > reg-names = "apb-base", "mem-base"; > > clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, > > <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; > > @@ -63,6 +63,8 @@ examples: > > phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>; > > phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; > > rockchip,max-outbound-regions = <16>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pcie_clkreqnb_cpm>; > > This is just example of the binding, you do not need to fill all > unrelated (generic) properties like pinctrl. Should I merge it as-is ? Thanks, Lorenzo > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > Best regards, > Krzysztof >
On 21/04/2023 11:26, Lorenzo Pieralisi wrote: > On Wed, Apr 19, 2023 at 10:01:25PM +0200, Krzysztof Kozlowski wrote: >> On 18/04/2023 09:46, Rick Wertenbroek wrote: >>> Update the example in the documentation to a valid example. >>> Address for mem-base was invalid, it pointed to address >>> 0x8000'0000 which is the upper region of the DDR which >>> is not necessarily populated depending on the board. >>> This address should point to the base of the memory >>> window region of the controller which is 0xfa00'0000. >>> Add missing pinctrl. >>> >>> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> >>> --- >>> .../devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml | 4 +++- >>> 1 file changed, 3 insertions(+), 1 deletion(-) >>> >>> diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml >>> index 88386a6d7011..6b62f6f58efe 100644 >>> --- a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml >>> +++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml >>> @@ -47,7 +47,7 @@ examples: >>> >>> pcie-ep@f8000000 { >>> compatible = "rockchip,rk3399-pcie-ep"; >>> - reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>; >>> + reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0xfa000000 0x0 0x2000000>; >>> reg-names = "apb-base", "mem-base"; >>> clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, >>> <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; >>> @@ -63,6 +63,8 @@ examples: >>> phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>; >>> phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; >>> rockchip,max-outbound-regions = <16>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&pcie_clkreqnb_cpm>; >> >> This is just example of the binding, you do not need to fill all >> unrelated (generic) properties like pinctrl. > > Should I merge it as-is ? Yeah, go ahead. That was the note for the future that generic properties are not always needed or even helpful in the example. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml index 88386a6d7011..6b62f6f58efe 100644 --- a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml @@ -47,7 +47,7 @@ examples: pcie-ep@f8000000 { compatible = "rockchip,rk3399-pcie-ep"; - reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>; + reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0xfa000000 0x0 0x2000000>; reg-names = "apb-base", "mem-base"; clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; @@ -63,6 +63,8 @@ examples: phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>; phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; rockchip,max-outbound-regions = <16>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqnb_cpm>; }; }; ...
Update the example in the documentation to a valid example. Address for mem-base was invalid, it pointed to address 0x8000'0000 which is the upper region of the DDR which is not necessarily populated depending on the board. This address should point to the base of the memory window region of the controller which is 0xfa00'0000. Add missing pinctrl. Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> --- .../devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)