@@ -5180,21 +5180,14 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
bool short_preamble, bool ampdu_enable, u32 rts_rate,
u8 macid)
{
- struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
struct rtl8xxxu_priv *priv = hw->priv;
struct device *dev = &priv->udev->dev;
u8 *qc = ieee80211_get_qos_ctl(hdr);
u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
- u32 rate;
+ u32 rate = 0;
u16 rate_flags = tx_info->control.rates[0].flags;
u16 seq_number;
- if (rate_flags & IEEE80211_TX_RC_MCS &&
- !ieee80211_is_mgmt(hdr->frame_control))
- rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
- else
- rate = tx_rate->hw_value;
-
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
dev_info(dev, "%s: TX rate: %d, pkt size %u\n",
__func__, rate, le16_to_cpu(tx_desc->pkt_size));
@@ -5253,24 +5246,17 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
bool short_preamble, bool ampdu_enable, u32 rts_rate,
u8 macid)
{
- struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
struct rtl8xxxu_priv *priv = hw->priv;
struct device *dev = &priv->udev->dev;
struct rtl8xxxu_txdesc40 *tx_desc40;
u8 *qc = ieee80211_get_qos_ctl(hdr);
u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
- u32 rate;
+ u32 rate = 0;
u16 rate_flags = tx_info->control.rates[0].flags;
u16 seq_number;
tx_desc40 = (struct rtl8xxxu_txdesc40 *)tx_desc32;
- if (rate_flags & IEEE80211_TX_RC_MCS &&
- !ieee80211_is_mgmt(hdr->frame_control))
- rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
- else
- rate = tx_rate->hw_value;
-
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
dev_info(dev, "%s: TX rate: %d, pkt size %u\n",
__func__, rate, le16_to_cpu(tx_desc40->pkt_size));
@@ -5334,22 +5320,15 @@ rtl8xxxu_fill_txdesc_v3(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
bool short_preamble, bool ampdu_enable, u32 rts_rate,
u8 macid)
{
- struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
struct rtl8xxxu_priv *priv = hw->priv;
struct device *dev = &priv->udev->dev;
struct rtl8xxxu_ra_info *ra = &priv->ra_info;
u8 *qc = ieee80211_get_qos_ctl(hdr);
u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
- u32 rate;
+ u32 rate = 0;
u16 rate_flags = tx_info->control.rates[0].flags;
u16 seq_number;
- if (rate_flags & IEEE80211_TX_RC_MCS &&
- !ieee80211_is_mgmt(hdr->frame_control))
- rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
- else
- rate = tx_rate->hw_value;
-
seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
if (ieee80211_is_data(hdr->frame_control)) {
As this driver uses HAS_RATE_CONTROL, tx_rates will not be provided by mac80211. For some frames c->control.rates[0].idx is negative, which means ieee80211_get_tx_rate() will print a warning and return NULL. Only management frames have USE_DRIVER_RATE set, so for all others the rate info of txdesc is ignored anyway. Remove call to ieee80211_get_tx_rate() and send management frames with 1M (rate info = 0). Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> --- .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 27 +++---------------- 1 file changed, 3 insertions(+), 24 deletions(-)