diff mbox series

[v2,1/2] arm64: dts/ti: am65x: Add Rocktech OLDI panel DT overlay

Message ID 20230426060612.19271-2-a-bhatia1@ti.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts/ti: Enable OLDI display on AM654 EVM | expand

Commit Message

Aradhya Bhatia April 26, 2023, 6:06 a.m. UTC
From: Jyri Sarha <jsarha@ti.com>

The OLDI-LCD1EVM add on board has Rocktech RK101II01D-CT panel[1] with
integrated touch screen. The integrated touch screen is Goodix GT928.
Add DT nodes for these and connect the endpoint nodes with DSS.

[1]: Product datasheet
https://www.digimax.it/media_import/DISPLAY/ROCKTECH/TFT%20LCD/RK101II01D-CT/RK101II01D-CT_DS_001.pdf

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
[abhatia1@ti.com: Make cosmetic and 6.1 DTSO syntax changes]
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
---
 arch/arm64/boot/dts/ti/Makefile               |  2 +
 ...am654-base-board-rocktech-rk101-panel.dtso | 69 +++++++++++++++++++
 2 files changed, 71 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso

Comments

Nishanth Menon April 26, 2023, 12:53 p.m. UTC | #1
On 11:36-20230426, Aradhya Bhatia wrote:
[...]
>  # Boards with J7200 SoC
>  dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
> new file mode 100644
> index 000000000000..aed6dcf3bd7d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
> @@ -0,0 +1,69 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * OLDI-LCD1EVM Rocktech integrated panel and touch DT overlay for AM654-EVM.

product link please.
Andrew Davis April 26, 2023, 1:17 p.m. UTC | #2
On 4/26/23 1:06 AM, Aradhya Bhatia wrote:
> From: Jyri Sarha <jsarha@ti.com>
> 
> The OLDI-LCD1EVM add on board has Rocktech RK101II01D-CT panel[1] with
> integrated touch screen. The integrated touch screen is Goodix GT928.
> Add DT nodes for these and connect the endpoint nodes with DSS.
> 
> [1]: Product datasheet
> https://www.digimax.it/media_import/DISPLAY/ROCKTECH/TFT%20LCD/RK101II01D-CT/RK101II01D-CT_DS_001.pdf
> 
> Signed-off-by: Jyri Sarha <jsarha@ti.com>
> Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
> [abhatia1@ti.com: Make cosmetic and 6.1 DTSO syntax changes]
> Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
> ---

LGTM,

Reviewed-by: Andrew Davis <afd@ti.com>

>   arch/arm64/boot/dts/ti/Makefile               |  2 +
>   ...am654-base-board-rocktech-rk101-panel.dtso | 69 +++++++++++++++++++
>   2 files changed, 71 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
> 
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index 6acd12409d59..3e6c4aa24f85 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -20,12 +20,14 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
>   dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
>   
>   # Boards with AM65x SoC
> +k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
>   dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
>   dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
>   dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
>   dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
>   dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
>   dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
> +dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb
>   
>   # Boards with J7200 SoC
>   dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
> new file mode 100644
> index 000000000000..aed6dcf3bd7d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
> @@ -0,0 +1,69 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * OLDI-LCD1EVM Rocktech integrated panel and touch DT overlay for AM654-EVM.
> + *
> + * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/pwm/pwm.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +&{/} {
> +	display0 {
> +		compatible = "rocktech,rk101ii01d-ct";
> +		backlight = <&lcd_bl>;
> +		enable-gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
> +		port {
> +			lcd_in0: endpoint {
> +				remote-endpoint = <&oldi_out0>;
> +			};
> +		};
> +	};
> +
> +	lcd_bl: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
> +		brightness-levels =
> +			<0 32 64 96 128 160 192 224 255>;
> +		default-brightness-level = <8>;
> +	};
> +};
> +
> +&dss {
> +	status = "okay";
> +};
> +
> +&dss_ports {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	port@0 {
> +		reg = <0>;
> +
> +		oldi_out0: endpoint {
> +			remote-endpoint = <&lcd_in0>;
> +		};
> +	};
> +};
> +
> +&main_i2c1 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	touchscreen@14 {
> +		compatible = "goodix,gt928";
> +		reg = <0x14>;
> +
> +		interrupt-parent = <&pca9554>;
> +		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
> +		touchscreen-size-x = <1280>;
> +		touchscreen-size-y = <800>;
> +
> +		reset-gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>;
> +		irq-gpios = <&pca9554 3 GPIO_ACTIVE_HIGH>;
> +	};
> +};
Aradhya Bhatia April 26, 2023, 1:53 p.m. UTC | #3
On 26-Apr-23 18:23, Nishanth Menon wrote:
> On 11:36-20230426, Aradhya Bhatia wrote:
> [...]
>>  # Boards with J7200 SoC
>>  dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb
>> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
>> new file mode 100644
>> index 000000000000..aed6dcf3bd7d
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
>> @@ -0,0 +1,69 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/**
>> + * OLDI-LCD1EVM Rocktech integrated panel and touch DT overlay for AM654-EVM.
> 
> product link please.
> 

Added the link in the commit message because believing that is the
status quo. Remember referencing this patch[1] a while back.

But a deeper look now tells me that, that might not be the case. Or
perhaps, its different for dt-binding patches and devictree patches.

Will correct this in v3 and send again.

Regards
Aradhya


[1]: https://patchwork.freedesktop.org/patch/357122/
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 6acd12409d59..3e6c4aa24f85 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -20,12 +20,14 @@  dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
 
 # Boards with AM65x SoC
+k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb
 
 # Boards with J7200 SoC
 dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
new file mode 100644
index 000000000000..aed6dcf3bd7d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
@@ -0,0 +1,69 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * OLDI-LCD1EVM Rocktech integrated panel and touch DT overlay for AM654-EVM.
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+	display0 {
+		compatible = "rocktech,rk101ii01d-ct";
+		backlight = <&lcd_bl>;
+		enable-gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
+		port {
+			lcd_in0: endpoint {
+				remote-endpoint = <&oldi_out0>;
+			};
+		};
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels =
+			<0 32 64 96 128 160 192 224 255>;
+		default-brightness-level = <8>;
+	};
+};
+
+&dss {
+	status = "okay";
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
+
+		oldi_out0: endpoint {
+			remote-endpoint = <&lcd_in0>;
+		};
+	};
+};
+
+&main_i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@14 {
+		compatible = "goodix,gt928";
+		reg = <0x14>;
+
+		interrupt-parent = <&pca9554>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+
+		reset-gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>;
+		irq-gpios = <&pca9554 3 GPIO_ACTIVE_HIGH>;
+	};
+};