diff mbox series

[v9,4/4] arm64: dts: qcom: qrb4210-rb2: Enable USB node

Message ID 20230501192432.1220727-5-bhupesh.sharma@linaro.org (mailing list archive)
State Superseded
Headers show
Series Enable USB SS qmp phy for Qualcomm SM6115 SoC | expand

Commit Message

Bhupesh Sharma May 1, 2023, 7:24 p.m. UTC 
Enable the USB controller and HS/SS PHYs on qrb4210-rb2 board.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

Comments

Dmitry Baryshkov May 2, 2023, 12:16 a.m. UTC | #1 
On 01/05/2023 22:24, Bhupesh Sharma wrote:
> Enable the USB controller and HS/SS PHYs on qrb4210-rb2 board.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>   arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 24 ++++++++++++++++++++++++
>   1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> index dc80f0bca767..eae3024ce003 100644
> --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> @@ -222,6 +222,30 @@ &uart4 {
>   	status = "okay";
>   };
>   
> +&usb {
> +	status = "okay";
> +};
> +
> +&usb_dwc3 {
> +	maximum-speed = "super-speed";
> +	dr_mode = "peripheral";
> +};
> +
> +&usb_hsphy {
> +	vdd-supply = <&vreg_l4a_0p9>;
> +	vdda-pll-supply = <&vreg_l12a_1p8>;
> +	vdda-phy-dpdm-supply = <&vreg_l15a_3p128>;
> +
> +	status = "okay";
> +};
> +
> +&usb_qmpphy {
> +	vdda-phy-supply = <&vreg_l4a_0p9>;
> +	vdda-pll-supply = <&vreg_l12a_1p8>;
> +
> +	status = "okay";
> +};
> +
>   &xo_board {
>   	clock-frequency = <19200000>;
>   };
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index dc80f0bca767..eae3024ce003 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -222,6 +222,30 @@  &uart4 {
 	status = "okay";
 };
 
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	maximum-speed = "super-speed";
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4a_0p9>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l15a_3p128>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4a_0p9>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+
+	status = "okay";
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };