diff mbox series

ca8210: move to gpio descriptors

Message ID 20230126161737.2985704-1-arnd@kernel.org (mailing list archive)
State Awaiting Upstream
Delegated to: Netdev Maintainers
Headers show
Series ca8210: move to gpio descriptors | expand

Checks

Context Check Description
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Arnd Bergmann Jan. 26, 2023, 4:17 p.m. UTC
From: Arnd Bergmann <arnd@arndb.de>

The driver requires DT based probing already, and can
be simplified by using the modern gpio interfaces.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/net/ieee802154/ca8210.c | 93 +++++++++------------------------
 1 file changed, 24 insertions(+), 69 deletions(-)

Comments

Arnd Bergmann Jan. 26, 2023, 4:25 p.m. UTC | #1
On Thu, Jan 26, 2023, at 17:17, Arnd Bergmann wrote:

>  	if (ret) {
> -		dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id);
> -		gpiod_unexport(gpio_to_desc(pdata->gpio_irq));
> -		gpio_free(pdata->gpio_irq);
> +		dev_crit(&spi->dev, "request_irq %d failed\n", priv->irq_id);
> +		gpiod_put(priv->gpio_irq);
>  	}

I just realized that this bit depends on the "gpiolib: remove
legacy gpio_export" patch I sent to the gpio mailing list earlier.

We can probably just defer this change until that is merged,
or alternatively I can rebase this patch to avoid the
dependency.

   Arnd
Stefan Schmidt Jan. 28, 2023, 1:30 p.m. UTC | #2
Hello Arnd.

On 26.01.23 17:25, Arnd Bergmann wrote:
> On Thu, Jan 26, 2023, at 17:17, Arnd Bergmann wrote:
> 
>>   	if (ret) {
>> -		dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id);
>> -		gpiod_unexport(gpio_to_desc(pdata->gpio_irq));
>> -		gpio_free(pdata->gpio_irq);
>> +		dev_crit(&spi->dev, "request_irq %d failed\n", priv->irq_id);
>> +		gpiod_put(priv->gpio_irq);
>>   	}
> 
> I just realized that this bit depends on the "gpiolib: remove
> legacy gpio_export" patch I sent to the gpio mailing list earlier.
> 
> We can probably just defer this change until that is merged,
> or alternatively I can rebase this patch to avoid the
> dependency.

Deferring the change until i picked it up from Linus or net-next in my 
tree is fine. This driver is not heavily worked on (its actually marked 
as orphaned) so the patch should still apply in a few days.

I will keep it in my patchwork queue of patches to be applied. No extra 
work needed from your side.

regards
Stefan Schmidt
Stefan Schmidt May 3, 2023, 12:01 p.m. UTC | #3
Hello Arnd.

On 26.01.23 17:25, Arnd Bergmann wrote:
> On Thu, Jan 26, 2023, at 17:17, Arnd Bergmann wrote:
> 
>>   	if (ret) {
>> -		dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id);
>> -		gpiod_unexport(gpio_to_desc(pdata->gpio_irq));
>> -		gpio_free(pdata->gpio_irq);
>> +		dev_crit(&spi->dev, "request_irq %d failed\n", priv->irq_id);
>> +		gpiod_put(priv->gpio_irq);
>>   	}
> 
> I just realized that this bit depends on the "gpiolib: remove
> legacy gpio_export" patch I sent to the gpio mailing list earlier.
> 
> We can probably just defer this change until that is merged,
> or alternatively I can rebase this patch to avoid the
> dependency.

I think the gpiolib ependency should be merged now. Do you want to 
rebase this patch against latest? We had some other ca8210 changes 
coming in.

regards
Stefan Schmidt
diff mbox series

Patch

diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c
index 5c0be6a3ec5e..2ee2746688ea 100644
--- a/drivers/net/ieee802154/ca8210.c
+++ b/drivers/net/ieee802154/ca8210.c
@@ -52,13 +52,11 @@ 
 #include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
-#include <linux/gpio.h>
 #include <linux/ieee802154.h>
 #include <linux/io.h>
 #include <linux/kfifo.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/poll.h>
@@ -312,6 +310,9 @@  struct ca8210_test {
  * @promiscuous:            whether the ca8210 is in promiscuous mode or not
  * @retries:                records how many times the current pending spi
  *                          transfer has been retried
+ * @gpio_reset:     	    gpio of ca8210 reset line
+ * @gpio_irq:       	    gpio number of ca8210 interrupt line
+ * @irq_id:        	    identifier for the ca8210 irq
  */
 struct ca8210_priv {
 	struct spi_device *spi;
@@ -332,6 +333,9 @@  struct ca8210_priv {
 	struct completion spi_transfer_complete, sync_exchange_complete;
 	bool promiscuous;
 	int retries;
+	struct gpio_desc *gpio_reset;
+	struct gpio_desc *gpio_irq;
+	int irq_id;
 };
 
 /**
@@ -351,18 +355,12 @@  struct work_priv_container {
  * @extclockenable: true if the external clock is to be enabled
  * @extclockfreq:   frequency of the external clock
  * @extclockgpio:   ca8210 output gpio of the external clock
- * @gpio_reset:     gpio number of ca8210 reset line
- * @gpio_irq:       gpio number of ca8210 interrupt line
- * @irq_id:         identifier for the ca8210 irq
  *
  */
 struct ca8210_platform_data {
 	bool extclockenable;
 	unsigned int extclockfreq;
 	unsigned int extclockgpio;
-	int gpio_reset;
-	int gpio_irq;
-	int irq_id;
 };
 
 /**
@@ -628,14 +626,13 @@  static int ca8210_spi_transfer(
  */
 static void ca8210_reset_send(struct spi_device *spi, unsigned int ms)
 {
-	struct ca8210_platform_data *pdata = spi->dev.platform_data;
 	struct ca8210_priv *priv = spi_get_drvdata(spi);
 	long status;
 
-	gpio_set_value(pdata->gpio_reset, 0);
+	gpiod_set_value(priv->gpio_reset, 0);
 	reinit_completion(&priv->ca8210_is_awake);
 	msleep(ms);
-	gpio_set_value(pdata->gpio_reset, 1);
+	gpiod_set_value(priv->gpio_reset, 1);
 	priv->promiscuous = false;
 
 	/* Wait until wakeup indication seen */
@@ -2788,74 +2785,34 @@  static void ca8210_unregister_ext_clock(struct spi_device *spi)
 	dev_info(&spi->dev, "External clock unregistered\n");
 }
 
-/**
- * ca8210_reset_init() - Initialise the reset input to the ca8210
- * @spi:  Pointer to target ca8210 spi device
- *
- * Return: 0 or linux error code
- */
-static int ca8210_reset_init(struct spi_device *spi)
-{
-	int ret;
-	struct ca8210_platform_data *pdata = spi->dev.platform_data;
-
-	pdata->gpio_reset = of_get_named_gpio(
-		spi->dev.of_node,
-		"reset-gpio",
-		0
-	);
-
-	ret = gpio_direction_output(pdata->gpio_reset, 1);
-	if (ret < 0) {
-		dev_crit(
-			&spi->dev,
-			"Reset GPIO %d did not set to output mode\n",
-			pdata->gpio_reset
-		);
-	}
-
-	return ret;
-}
-
 /**
  * ca8210_interrupt_init() - Initialise the irq output from the ca8210
  * @spi:  Pointer to target ca8210 spi device
  *
  * Return: 0 or linux error code
  */
-static int ca8210_interrupt_init(struct spi_device *spi)
+static int ca8210_interrupt_init(struct spi_device *spi, struct ca8210_priv *priv)
 {
 	int ret;
-	struct ca8210_platform_data *pdata = spi->dev.platform_data;
 
-	pdata->gpio_irq = of_get_named_gpio(
-		spi->dev.of_node,
-		"irq-gpio",
-		0
-	);
-
-	pdata->irq_id = gpio_to_irq(pdata->gpio_irq);
-	if (pdata->irq_id < 0) {
-		dev_crit(
-			&spi->dev,
-			"Could not get irq for gpio pin %d\n",
-			pdata->gpio_irq
-		);
-		gpio_free(pdata->gpio_irq);
-		return pdata->irq_id;
+	priv->gpio_irq = gpiod_get(&spi->dev, "irq", GPIOD_IN);
+	priv->irq_id = gpiod_to_irq(priv->gpio_irq);
+	if (priv->irq_id < 0) {
+		dev_crit(&spi->dev, "Could not get irq for gpio pin\n");
+		gpiod_put(priv->gpio_irq);
+		return priv->irq_id;
 	}
 
 	ret = request_irq(
-		pdata->irq_id,
+		priv->irq_id,
 		ca8210_interrupt_handler,
 		IRQF_TRIGGER_FALLING,
 		"ca8210-irq",
 		spi_get_drvdata(spi)
 	);
 	if (ret) {
-		dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id);
-		gpiod_unexport(gpio_to_desc(pdata->gpio_irq));
-		gpio_free(pdata->gpio_irq);
+		dev_crit(&spi->dev, "request_irq %d failed\n", priv->irq_id);
+		gpiod_put(priv->gpio_irq);
 	}
 
 	return ret;
@@ -3009,7 +2966,7 @@  static void ca8210_test_interface_clear(struct ca8210_priv *priv)
  */
 static void ca8210_remove(struct spi_device *spi_device)
 {
-	struct ca8210_priv *priv;
+	struct ca8210_priv *priv = spi_get_drvdata(spi_device);
 	struct ca8210_platform_data *pdata;
 
 	dev_info(&spi_device->dev, "Removing ca8210\n");
@@ -3020,12 +2977,10 @@  static void ca8210_remove(struct spi_device *spi_device)
 			ca8210_unregister_ext_clock(spi_device);
 			ca8210_config_extern_clk(pdata, spi_device, 0);
 		}
-		free_irq(pdata->irq_id, spi_device->dev.driver_data);
+		free_irq(priv->irq_id, spi_device->dev.driver_data);
 		kfree(pdata);
 		spi_device->dev.platform_data = NULL;
 	}
-	/* get spi_device private data */
-	priv = spi_get_drvdata(spi_device);
 	if (priv) {
 		dev_info(
 			&spi_device->dev,
@@ -3114,13 +3069,13 @@  static int ca8210_probe(struct spi_device *spi_device)
 		dev_crit(&spi_device->dev, "ca8210_dev_com_init failed\n");
 		goto error;
 	}
-	ret = ca8210_reset_init(priv->spi);
-	if (ret) {
-		dev_crit(&spi_device->dev, "ca8210_reset_init failed\n");
+	priv->gpio_reset = gpiod_get(&spi_device->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->gpio_reset)) {
+		dev_crit(&spi_device->dev, "ca8210 reset init failed\n");
 		goto error;
 	}
 
-	ret = ca8210_interrupt_init(priv->spi);
+	ret = ca8210_interrupt_init(priv->spi, priv);
 	if (ret) {
 		dev_crit(&spi_device->dev, "ca8210_interrupt_init failed\n");
 		goto error;