| Message ID | 20230502062813.112434-3-jaewon02.kim@samsung.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 3456674f54d3cfdedb28ce8a3db2b6f975392ac8 |
| Headers | show |
| Series | [v3,1/3] spi: s3c64xx: change polling mode to optional | expand |
On 02/05/2023 08:28, Jaewon Kim wrote: > In polling mode, the status register is continuously read to check data > transfer completion. It can cause excessive CPU usage. > To reduce this, we can calculate the transfer time and put the sleep during > transfer. > > When test on ExynosAuto9 SADK board, throughput remained the same, but > 100% CPU utilization decreased to 40%. > > Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> > --- Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 66ac94022a1b..2a8304678df9 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -561,11 +561,18 @@ static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd, u32 cpy_len; u8 *buf; int ms; + unsigned long time_us; - /* millisecs to xfer 'len' bytes @ 'cur_speed' */ - ms = xfer->len * 8 * 1000 / sdd->cur_speed; + /* microsecs to xfer 'len' bytes @ 'cur_speed' */ + time_us = (xfer->len * 8 * 1000 * 1000) / sdd->cur_speed; + ms = (time_us / 1000); ms += 10; /* some tolerance */ + /* sleep during signal transfer time */ + status = readl(regs + S3C64XX_SPI_STATUS); + if (RX_FIFO_LVL(status, sdd) < xfer->len) + usleep_range(time_us / 2, time_us); + val = msecs_to_loops(ms); do { status = readl(regs + S3C64XX_SPI_STATUS);
In polling mode, the status register is continuously read to check data transfer completion. It can cause excessive CPU usage. To reduce this, we can calculate the transfer time and put the sleep during transfer. When test on ExynosAuto9 SADK board, throughput remained the same, but 100% CPU utilization decreased to 40%. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> --- drivers/spi/spi-s3c64xx.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)