| Message ID | 20230504153511.4007320-1-dmitry.baryshkov@linaro.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | drm/i915: move DSC RC tables to drm_dsc_helper.c | expand |
On Thu, 04 May 2023, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: > Other platforms (msm) will benefit from sharing the DSC config setup > functions. This series moves parts of static DSC config data from the > i915 driver to the common helpers to be used by other drivers. > > Note: the RC parameters were cross-checked against config files found in > DSC model 2021062, 20161212 (and 20150914). The first patch modifies > tables according to those config files, while preserving parameter > values using the code. I have not changed one of the values in the > pre-SCR config file as it clearly looks like a typo in the config file, > considering the table E in DSC 1.1 and in the DSC 1.1 SCR. As I believe I've said before, I think it's fine to merge these either via drm-intel or drm-misc. Which do you prefer? BR, Jani. > > Chances since v4: > - Rebased on top of drm-intel-next > - Cut the first 8 patches of the series to ease merging. The rest of the > patches will go afterwards. > > Chances since v3: > - Rebased on top of drm-intel-next > - Dropped the msm patch to make patchset fully mergeable through > drm-intel > - Made drm_dsc_set_const_params() ignore rc_model_size, picked up > drm_dsc_set_initial_scale_value() patch by Jessica and switched > intel_vdsc.c to use those two helpers. > - Added a patch to make i915 actually use rc_tgt_offset_high, > rc_tgt_offset_low and rc_edge_factor from struct drm_dsc_config. > > Chances since v2: > - Rebased on top of drm-intel-next > > Chances since v1: > - Made drm_dsc_rc_buf_thresh static rather than exporting it > - Switched drm_dsc_rc_buf_thresh loop to use ARRAY_SIZE. Added > BUILD_BUG_ON's to be sure that array sizes are correct > - Fixed rc_parameters_data indentation to be logical and tidy > - Fixed drm_dsc_setup_rc_params() kerneldoc > - Added a clause to drm_dsc_setup_rc_params() to verify bpp and bpc > being set. > - Fixed range_bpg_offset programming in calculate_rc_params() > - Fixed bpp vs bpc bug in intel_dsc_compute_params() > - Added FIXME comment next to the customizations in > intel_dsc_compute_params(). > > Dmitry Baryshkov (8): > drm/i915/dsc: change DSC param tables to follow the DSC model > drm/i915/dsc: move rc_buf_thresh values to common helper > drm/i915/dsc: move DSC tables to DRM DSC helper > drm/i915/dsc: stop using interim structure for calculated params > drm/display/dsc: use flat array for rc_parameters lookup > drm/display/dsc: split DSC 1.2 and DSC 1.1 (pre-SCR) parameters > drm/display/dsc: include the rest of pre-SCR parameters > drm/display/dsc: add YCbCr 4:2:2 and 4:2:0 RC parameters > > drivers/gpu/drm/display/drm_dsc_helper.c | 986 ++++++++++++++++++++++ > drivers/gpu/drm/i915/display/intel_vdsc.c | 443 ++-------- > include/drm/display/drm_dsc_helper.h | 9 + > 3 files changed, 1042 insertions(+), 396 deletions(-)
On 15/05/2023 12:12, Jani Nikula wrote: > On Thu, 04 May 2023, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: >> Other platforms (msm) will benefit from sharing the DSC config setup >> functions. This series moves parts of static DSC config data from the >> i915 driver to the common helpers to be used by other drivers. >> >> Note: the RC parameters were cross-checked against config files found in >> DSC model 2021062, 20161212 (and 20150914). The first patch modifies >> tables according to those config files, while preserving parameter >> values using the code. I have not changed one of the values in the >> pre-SCR config file as it clearly looks like a typo in the config file, >> considering the table E in DSC 1.1 and in the DSC 1.1 SCR. > > As I believe I've said before, I think it's fine to merge these either > via drm-intel or drm-misc. Which do you prefer? No strong preference. Maybe drm-misc would be easier for us to back-merge it into msm/next. Otherwise it is up to you. > > BR, > Jani. > > > >> >> Chances since v4: >> - Rebased on top of drm-intel-next >> - Cut the first 8 patches of the series to ease merging. The rest of the >> patches will go afterwards. >> >> Chances since v3: >> - Rebased on top of drm-intel-next >> - Dropped the msm patch to make patchset fully mergeable through >> drm-intel >> - Made drm_dsc_set_const_params() ignore rc_model_size, picked up >> drm_dsc_set_initial_scale_value() patch by Jessica and switched >> intel_vdsc.c to use those two helpers. >> - Added a patch to make i915 actually use rc_tgt_offset_high, >> rc_tgt_offset_low and rc_edge_factor from struct drm_dsc_config. >> >> Chances since v2: >> - Rebased on top of drm-intel-next >> >> Chances since v1: >> - Made drm_dsc_rc_buf_thresh static rather than exporting it >> - Switched drm_dsc_rc_buf_thresh loop to use ARRAY_SIZE. Added >> BUILD_BUG_ON's to be sure that array sizes are correct >> - Fixed rc_parameters_data indentation to be logical and tidy >> - Fixed drm_dsc_setup_rc_params() kerneldoc >> - Added a clause to drm_dsc_setup_rc_params() to verify bpp and bpc >> being set. >> - Fixed range_bpg_offset programming in calculate_rc_params() >> - Fixed bpp vs bpc bug in intel_dsc_compute_params() >> - Added FIXME comment next to the customizations in >> intel_dsc_compute_params(). >> >> Dmitry Baryshkov (8): >> drm/i915/dsc: change DSC param tables to follow the DSC model >> drm/i915/dsc: move rc_buf_thresh values to common helper >> drm/i915/dsc: move DSC tables to DRM DSC helper >> drm/i915/dsc: stop using interim structure for calculated params >> drm/display/dsc: use flat array for rc_parameters lookup >> drm/display/dsc: split DSC 1.2 and DSC 1.1 (pre-SCR) parameters >> drm/display/dsc: include the rest of pre-SCR parameters >> drm/display/dsc: add YCbCr 4:2:2 and 4:2:0 RC parameters >> >> drivers/gpu/drm/display/drm_dsc_helper.c | 986 ++++++++++++++++++++++ >> drivers/gpu/drm/i915/display/intel_vdsc.c | 443 ++-------- >> include/drm/display/drm_dsc_helper.h | 9 + >> 3 files changed, 1042 insertions(+), 396 deletions(-) >