| Message ID | 20230516202430.4157216-7-yazen.ghannam@amd.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Enhance AMD SMN Error Checking | expand |
On Tue, May 16, 2023 at 03:24:30PM -0500, Yazen Ghannam wrote: > Currently, k10temp_get_ccd_support() takes as input "pdev" and "data". > However, "pdev" is already included in "data". Furthermore, the "pdev" > parameter is no longer used in k10temp_get_ccd_support(), since its use > was moved into read_ccd_temp_reg(). > > Drop the "pdev" input parameter as it is no longer needed. > > No functional change is intended. > > Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Acked-by: Guenter Roeck <linux@roeck-us.net> > --- > drivers/hwmon/k10temp.c | 17 ++++++++--------- > 1 file changed, 8 insertions(+), 9 deletions(-) > > diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c > index 06af1fe38af7..873dbe0f5806 100644 > --- a/drivers/hwmon/k10temp.c > +++ b/drivers/hwmon/k10temp.c > @@ -379,8 +379,7 @@ static const struct hwmon_chip_info k10temp_chip_info = { > .info = k10temp_info, > }; > > -static void k10temp_get_ccd_support(struct pci_dev *pdev, > - struct k10temp_data *data, int limit) > +static void k10temp_get_ccd_support(struct k10temp_data *data, int limit) > { > u32 regval; > int i; > @@ -435,18 +434,18 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id) > case 0x11: /* Zen APU */ > case 0x18: /* Zen+ APU */ > data->ccd_offset = 0x154; > - k10temp_get_ccd_support(pdev, data, 4); > + k10temp_get_ccd_support(data, 4); > break; > case 0x31: /* Zen2 Threadripper */ > case 0x60: /* Renoir */ > case 0x68: /* Lucienne */ > case 0x71: /* Zen2 */ > data->ccd_offset = 0x154; > - k10temp_get_ccd_support(pdev, data, 8); > + k10temp_get_ccd_support(data, 8); > break; > case 0xa0 ... 0xaf: > data->ccd_offset = 0x300; > - k10temp_get_ccd_support(pdev, data, 8); > + k10temp_get_ccd_support(data, 8); > break; > } > } else if (boot_cpu_data.x86 == 0x19) { > @@ -459,21 +458,21 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id) > case 0x21: /* Zen3 Ryzen Desktop */ > case 0x50 ... 0x5f: /* Green Sardine */ > data->ccd_offset = 0x154; > - k10temp_get_ccd_support(pdev, data, 8); > + k10temp_get_ccd_support(data, 8); > break; > case 0x40 ... 0x4f: /* Yellow Carp */ > data->ccd_offset = 0x300; > - k10temp_get_ccd_support(pdev, data, 8); > + k10temp_get_ccd_support(data, 8); > break; > case 0x60 ... 0x6f: > case 0x70 ... 0x7f: > data->ccd_offset = 0x308; > - k10temp_get_ccd_support(pdev, data, 8); > + k10temp_get_ccd_support(data, 8); > break; > case 0x10 ... 0x1f: > case 0xa0 ... 0xaf: > data->ccd_offset = 0x300; > - k10temp_get_ccd_support(pdev, data, 12); > + k10temp_get_ccd_support(data, 12); > break; > } > } else { > -- > 2.34.1 >
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index 06af1fe38af7..873dbe0f5806 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -379,8 +379,7 @@ static const struct hwmon_chip_info k10temp_chip_info = { .info = k10temp_info, }; -static void k10temp_get_ccd_support(struct pci_dev *pdev, - struct k10temp_data *data, int limit) +static void k10temp_get_ccd_support(struct k10temp_data *data, int limit) { u32 regval; int i; @@ -435,18 +434,18 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id) case 0x11: /* Zen APU */ case 0x18: /* Zen+ APU */ data->ccd_offset = 0x154; - k10temp_get_ccd_support(pdev, data, 4); + k10temp_get_ccd_support(data, 4); break; case 0x31: /* Zen2 Threadripper */ case 0x60: /* Renoir */ case 0x68: /* Lucienne */ case 0x71: /* Zen2 */ data->ccd_offset = 0x154; - k10temp_get_ccd_support(pdev, data, 8); + k10temp_get_ccd_support(data, 8); break; case 0xa0 ... 0xaf: data->ccd_offset = 0x300; - k10temp_get_ccd_support(pdev, data, 8); + k10temp_get_ccd_support(data, 8); break; } } else if (boot_cpu_data.x86 == 0x19) { @@ -459,21 +458,21 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id) case 0x21: /* Zen3 Ryzen Desktop */ case 0x50 ... 0x5f: /* Green Sardine */ data->ccd_offset = 0x154; - k10temp_get_ccd_support(pdev, data, 8); + k10temp_get_ccd_support(data, 8); break; case 0x40 ... 0x4f: /* Yellow Carp */ data->ccd_offset = 0x300; - k10temp_get_ccd_support(pdev, data, 8); + k10temp_get_ccd_support(data, 8); break; case 0x60 ... 0x6f: case 0x70 ... 0x7f: data->ccd_offset = 0x308; - k10temp_get_ccd_support(pdev, data, 8); + k10temp_get_ccd_support(data, 8); break; case 0x10 ... 0x1f: case 0xa0 ... 0xaf: data->ccd_offset = 0x300; - k10temp_get_ccd_support(pdev, data, 12); + k10temp_get_ccd_support(data, 12); break; } } else {
Currently, k10temp_get_ccd_support() takes as input "pdev" and "data". However, "pdev" is already included in "data". Furthermore, the "pdev" parameter is no longer used in k10temp_get_ccd_support(), since its use was moved into read_ccd_temp_reg(). Drop the "pdev" input parameter as it is no longer needed. No functional change is intended. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> --- drivers/hwmon/k10temp.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-)