diff mbox series

[v3,14/18] firmware: qcom_scm: provide a read-modify-write function

Message ID 1683133352-10046-15-git-send-email-quic_mojha@quicinc.com (mailing list archive)
State Handled Elsewhere
Headers show
Series [v3,01/18] remoteproc: qcom: Expand MD_* as MINIDUMP_* | expand

Commit Message

Mukesh Ojha May 3, 2023, 5:02 p.m. UTC
It was realized by Srinivas K. that there is a need of
read-modify-write scm exported function so that it can
be used by multiple clients.

Let's introduce qcom_scm_io_update_field() which masks
out the bits and write the passed value to that
bit-offset. Subsequent patch will use this function.

Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
---
 drivers/firmware/qcom_scm.c            | 15 +++++++++++++++
 include/linux/firmware/qcom/qcom_scm.h |  2 ++
 2 files changed, 17 insertions(+)

Comments

Trilok Soni May 18, 2023, 6:48 p.m. UTC | #1
On 5/3/2023 10:02 AM, Mukesh Ojha wrote:
> It was realized by Srinivas K. that there is a need of
> read-modify-write scm exported function so that it can
> be used by multiple clients.
> 
> Let's introduce qcom_scm_io_update_field() which masks
> out the bits and write the passed value to that
> bit-offset. Subsequent patch will use this function.
> 
> Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
> ---
>   drivers/firmware/qcom_scm.c            | 15 +++++++++++++++
>   include/linux/firmware/qcom/qcom_scm.h |  2 ++
>   2 files changed, 17 insertions(+)
> 
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index fde33acd..003cbcb 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -407,6 +407,21 @@ int qcom_scm_set_remote_state(u32 state, u32 id)
>   }
>   EXPORT_SYMBOL(qcom_scm_set_remote_state);
>   
> +int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask, unsigned int val)
> +{
> +	unsigned int old, new;
> +	int ret;
> +
> +	ret = qcom_scm_io_readl(addr, &old);
> +	if (ret)
> +		return ret;
> +
> +	new = (old & ~mask) | val << (ffs(mask) - 1);
> +
> +	return qcom_scm_io_writel(addr, new);
> +}
> +EXPORT_SYMBOL(qcom_scm_io_update_field);

EXPORT_SYMBOL_GPL?

There are other symbols in this driver marked as EXPORT_SYMBOL only. Can 
you submit a separate patch to convert them into EXPORT_SYMBOL_GPL. OR I 
want to know why we are marking them without _GPL.

checkpatch should catch this as well? By default we should have all the 
new additions as EXPORT_SYMBOL_GPL and only few existing APIs w/ 
exceptions?

---Trilok Soni
diff mbox series

Patch

diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index fde33acd..003cbcb 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -407,6 +407,21 @@  int qcom_scm_set_remote_state(u32 state, u32 id)
 }
 EXPORT_SYMBOL(qcom_scm_set_remote_state);
 
+int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask, unsigned int val)
+{
+	unsigned int old, new;
+	int ret;
+
+	ret = qcom_scm_io_readl(addr, &old);
+	if (ret)
+		return ret;
+
+	new = (old & ~mask) | val << (ffs(mask) - 1);
+
+	return qcom_scm_io_writel(addr, new);
+}
+EXPORT_SYMBOL(qcom_scm_io_update_field);
+
 static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
 {
 	struct qcom_scm_desc desc = {
diff --git a/include/linux/firmware/qcom/qcom_scm.h b/include/linux/firmware/qcom/qcom_scm.h
index 250ea4e..ca41e4e 100644
--- a/include/linux/firmware/qcom/qcom_scm.h
+++ b/include/linux/firmware/qcom/qcom_scm.h
@@ -84,6 +84,8 @@  extern bool qcom_scm_pas_supported(u32 peripheral);
 
 extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
 extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
+extern int qcom_scm_io_update_field(phys_addr_t addr, unsigned int mask,
+				    unsigned int val);
 
 extern bool qcom_scm_restore_sec_cfg_available(void);
 extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);