diff mbox series

[10/11] arm64: dts: qcom: ipq5018: Add MP03.5-c1 board support

Message ID 1678164097-13247-11-git-send-email-quic_mmanikan@quicinc.com (mailing list archive)
State Not Applicable, archived
Headers show
Series Add multipd remoteproc support | expand

Commit Message

Manikanta Mylavarapu March 7, 2023, 4:41 a.m. UTC 
Add initial device tree support for the MP03.5-C1 board.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |  1 +
 .../arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts | 64 +++++++++++++++++++
 2 files changed, 65 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts

Comments

Varadarajan Narayanan March 7, 2023, 6:25 a.m. UTC | #1 
On 3/7/2023 10:11 AM, Manikanta Mylavarapu wrote:
> Add initial device tree support for the MP03.5-C1 board.
>
> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/Makefile             |  1 +
>   .../arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts | 64 +++++++++++++++++++
>   2 files changed, 65 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index b77a95e97a56..10d1eafe57e4 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-mp03.1-c2.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-mp03.5-c1.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
> new file mode 100644
> index 000000000000..51ddd7367ac6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
> @@ -0,0 +1,64 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> +/*
> + * IPQ5018 CP01 board device tree source
MP03??
> + *
> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.

Update the year

-Varada

> + */
> +
> +/dts-v1/;
> +
> +#include "ipq5018.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1";
> +	compatible = "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
> +
> +	aliases {
> +		serial0 = &blsp1_uart1;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyMSM0,115200,n8 rw init=/init swiotlb=1 coherent_pool=2M";
> +		stdout-path = "serial0:115200n8";
> +	};
> +};
> +
> +&tlmm {
> +	blsp0_uart_pins: uart_pins {
> +		pins = "gpio20", "gpio21";
> +		function = "blsp0_uart0";
> +		bias-disable;
> +	};
> +};
> +
> +&blsp1_uart1 {
> +	pinctrl-0 = <&blsp0_uart_pins>;
> +	pinctrl-names = "default";
> +	status = "ok";
> +};
> +
> +&q6v5_wcss {
> +	q6_wcss_pd1: remoteproc_pd1 {
> +		interrupts-extended = <&wcss_smp2p_in 8 0>,
> +				<&wcss_smp2p_in 9 0>,
> +				<&wcss_smp2p_in 12 0>,
> +				<&wcss_smp2p_in 11 0>;
> +		interrupt-names = "fatal",
> +				"ready",
> +				"spawn-ack",
> +				"stop-ack";
> +		qcom,smem-states = <&wcss_smp2p_out 8>,
> +				<&wcss_smp2p_out 9>,
> +				<&wcss_smp2p_out 10>;
> +		qcom,smem-state-names = "shutdown",
> +					"stop",
> +					"spawn";
> +	};
> +	q6_wcss_pd2: remoteproc_pd2 {
> +		status = "okay";
> +	};
> +
> +	q6_wcss_pd3: remoteproc_pd3 {
> +		status = "okay";
> +	};
> +};
Kathiravan Thirumoorthy March 7, 2023, 2:15 p.m. UTC | #2 
On 3/7/2023 10:11 AM, Manikanta Mylavarapu wrote:
> Add initial device tree support for the MP03.5-C1 board.
>
> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/Makefile             |  1 +
>   .../arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts | 64 +++++++++++++++++++
>   2 files changed, 65 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index b77a95e97a56..10d1eafe57e4 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-mp03.1-c2.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-mp03.5-c1.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
> new file mode 100644
> index 000000000000..51ddd7367ac6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
> @@ -0,0 +1,64 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> +/*
> + * IPQ5018 CP01 board device tree source
> + *
> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "ipq5018.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1";
> +	compatible = "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
> +
> +	aliases {
> +		serial0 = &blsp1_uart1;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyMSM0,115200,n8 rw init=/init swiotlb=1 coherent_pool=2M";


Is the bootargs required?


> +		stdout-path = "serial0:115200n8";
> +	};
> +};
> +
> +&tlmm {
> +	blsp0_uart_pins: uart_pins {


node name should be uart-state {. Didn't dtbs_check complain it or am I 
missing something?


> +		pins = "gpio20", "gpio21";
> +		function = "blsp0_uart0";
> +		bias-disable;
> +	};
> +};
> +
> +&blsp1_uart1 {
> +	pinctrl-0 = <&blsp0_uart_pins>;
> +	pinctrl-names = "default";
> +	status = "ok";


s/ok/okay/


> +};
> +
> +&q6v5_wcss {
> +	q6_wcss_pd1: remoteproc_pd1 {
> +		interrupts-extended = <&wcss_smp2p_in 8 0>,
> +				<&wcss_smp2p_in 9 0>,
> +				<&wcss_smp2p_in 12 0>,
> +				<&wcss_smp2p_in 11 0>;


please align all these entries


> +		interrupt-names = "fatal",
> +				"ready",
> +				"spawn-ack",
> +				"stop-ack";
> +		qcom,smem-states = <&wcss_smp2p_out 8>,
> +				<&wcss_smp2p_out 9>,
> +				<&wcss_smp2p_out 10>;
> +		qcom,smem-state-names = "shutdown",
> +					"stop",
> +					"spawn";
> +	};


leave a blank line


> +	q6_wcss_pd2: remoteproc_pd2 {
> +		status = "okay";
> +	};
> +
> +	q6_wcss_pd3: remoteproc_pd3 {
> +		status = "okay";
> +	};
> +};
Krzysztof Kozlowski March 7, 2023, 3:42 p.m. UTC | #3 
On 07/03/2023 05:41, Manikanta Mylavarapu wrote:
> Add initial device tree support for the MP03.5-C1 board.
> 
> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |  1 +
>  .../arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts | 64 +++++++++++++++++++
>  2 files changed, 65 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index b77a95e97a56..10d1eafe57e4 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-mp03.1-c2.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-mp03.5-c1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
> new file mode 100644
> index 000000000000..51ddd7367ac6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
> @@ -0,0 +1,64 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> +/*
> + * IPQ5018 CP01 board device tree source
> + *
> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "ipq5018.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1";
> +	compatible = "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
> +
> +	aliases {
> +		serial0 = &blsp1_uart1;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyMSM0,115200,n8 rw init=/init swiotlb=1 coherent_pool=2M";

Not a common DT property. Drop.

> +		stdout-path = "serial0:115200n8";
> +	};
> +};
> +
> +&tlmm {
> +	blsp0_uart_pins: uart_pins {

Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).

I'll stop the review. Please first run tests.



Best regards,
Krzysztof
Manikanta Mylavarapu May 21, 2023, 4:05 p.m. UTC | #4 
On 3/7/2023 11:55 AM, Varadarajan Narayanan wrote:
> 
> On 3/7/2023 10:11 AM, Manikanta Mylavarapu wrote:
>> Add initial device tree support for the MP03.5-C1 board.
>>
>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/Makefile             |  1 +
>>   .../arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts | 64 +++++++++++++++++++
>>   2 files changed, 65 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile 
>> b/arch/arm64/boot/dts/qcom/Makefile
>> index b77a95e97a56..10d1eafe57e4 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM)    += 
>> apq8094-sony-xperia-kitakami-karin_windy.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += apq8096-db820c.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += apq8096-ifc6640.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += ipq5018-mp03.1-c2.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)    += ipq5018-mp03.5-c1.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += ipq6018-cp01-c1.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk01.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk10-c1.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts 
>> b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>> new file mode 100644
>> index 000000000000..51ddd7367ac6
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>> @@ -0,0 +1,64 @@
>> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
>> +/*
>> + * IPQ5018 CP01 board device tree source
> MP03??
I will change to IPQ5018-RDP432-C1
>> + *
>> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
> 
> Update the year
>  > -Varada
> 
I will update.

Thanks & Regards,
Manikanta.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "ipq5018.dtsi"
>> +
>> +/ {
>> +    model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1";
>> +    compatible = "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
>> +
>> +    aliases {
>> +        serial0 = &blsp1_uart1;
>> +    };
>> +
>> +    chosen {
>> +        bootargs = "console=ttyMSM0,115200,n8 rw init=/init swiotlb=1 
>> coherent_pool=2M";
>> +        stdout-path = "serial0:115200n8";
>> +    };
>> +};
>> +
>> +&tlmm {
>> +    blsp0_uart_pins: uart_pins {
>> +        pins = "gpio20", "gpio21";
>> +        function = "blsp0_uart0";
>> +        bias-disable;
>> +    };
>> +};
>> +
>> +&blsp1_uart1 {
>> +    pinctrl-0 = <&blsp0_uart_pins>;
>> +    pinctrl-names = "default";
>> +    status = "ok";
>> +};
>> +
>> +&q6v5_wcss {
>> +    q6_wcss_pd1: remoteproc_pd1 {
>> +        interrupts-extended = <&wcss_smp2p_in 8 0>,
>> +                <&wcss_smp2p_in 9 0>,
>> +                <&wcss_smp2p_in 12 0>,
>> +                <&wcss_smp2p_in 11 0>;
>> +        interrupt-names = "fatal",
>> +                "ready",
>> +                "spawn-ack",
>> +                "stop-ack";
>> +        qcom,smem-states = <&wcss_smp2p_out 8>,
>> +                <&wcss_smp2p_out 9>,
>> +                <&wcss_smp2p_out 10>;
>> +        qcom,smem-state-names = "shutdown",
>> +                    "stop",
>> +                    "spawn";
>> +    };
>> +    q6_wcss_pd2: remoteproc_pd2 {
>> +        status = "okay";
>> +    };
>> +
>> +    q6_wcss_pd3: remoteproc_pd3 {
>> +        status = "okay";
>> +    };
>> +};
Manikanta Mylavarapu May 21, 2023, 4:09 p.m. UTC | #5 
On 3/7/2023 7:45 PM, Kathiravan T wrote:
> 
> On 3/7/2023 10:11 AM, Manikanta Mylavarapu wrote:
>> Add initial device tree support for the MP03.5-C1 board.
>>
>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/Makefile             |  1 +
>>   .../arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts | 64 +++++++++++++++++++
>>   2 files changed, 65 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile 
>> b/arch/arm64/boot/dts/qcom/Makefile
>> index b77a95e97a56..10d1eafe57e4 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM)    += 
>> apq8094-sony-xperia-kitakami-karin_windy.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += apq8096-db820c.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += apq8096-ifc6640.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += ipq5018-mp03.1-c2.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)    += ipq5018-mp03.5-c1.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += ipq6018-cp01-c1.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk01.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk10-c1.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts 
>> b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>> new file mode 100644
>> index 000000000000..51ddd7367ac6
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>> @@ -0,0 +1,64 @@
>> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
>> +/*
>> + * IPQ5018 CP01 board device tree source
>> + *
>> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "ipq5018.dtsi"
>> +
>> +/ {
>> +    model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1";
>> +    compatible = "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
>> +
>> +    aliases {
>> +        serial0 = &blsp1_uart1;
>> +    };
>> +
>> +    chosen {
>> +        bootargs = "console=ttyMSM0,115200,n8 rw init=/init swiotlb=1 
>> coherent_pool=2M";
> 
> 
> Is the bootargs required?
> 
> 
No, i will remove it.
>> +        stdout-path = "serial0:115200n8";
>> +    };
>> +};
>> +
>> +&tlmm {
>> +    blsp0_uart_pins: uart_pins {
> 
> 
> node name should be uart-state {. Didn't dtbs_check complain it or am I 
> missing something?
> 
> 
Yeah, it should be. I will correct it.
>> +        pins = "gpio20", "gpio21";
>> +        function = "blsp0_uart0";
>> +        bias-disable;
>> +    };
>> +};
>> +
>> +&blsp1_uart1 {
>> +    pinctrl-0 = <&blsp0_uart_pins>;
>> +    pinctrl-names = "default";
>> +    status = "ok";
> 
> 
> s/ok/okay/
> 
> 
I will update.
>> +};
>> +
>> +&q6v5_wcss {
>> +    q6_wcss_pd1: remoteproc_pd1 {
>> +        interrupts-extended = <&wcss_smp2p_in 8 0>,
>> +                <&wcss_smp2p_in 9 0>,
>> +                <&wcss_smp2p_in 12 0>,
>> +                <&wcss_smp2p_in 11 0>;
> 
> 
> please align all these entries
> 
> 
I will do it.
>> +        interrupt-names = "fatal",
>> +                "ready",
>> +                "spawn-ack",
>> +                "stop-ack";
>> +        qcom,smem-states = <&wcss_smp2p_out 8>,
>> +                <&wcss_smp2p_out 9>,
>> +                <&wcss_smp2p_out 10>;
>> +        qcom,smem-state-names = "shutdown",
>> +                    "stop",
>> +                    "spawn";
>> +    };
> 
> 
> leave a blank line
> 
> 
Sure, I will do it.
>> +    q6_wcss_pd2: remoteproc_pd2 {
>> +        status = "okay";
>> +    };
>> +
>> +    q6_wcss_pd3: remoteproc_pd3 {
>> +        status = "okay";
>> +    };
>> +};
Manikanta Mylavarapu May 21, 2023, 4:12 p.m. UTC | #6 
On 3/7/2023 9:12 PM, Krzysztof Kozlowski wrote:
> On 07/03/2023 05:41, Manikanta Mylavarapu wrote:
>> Add initial device tree support for the MP03.5-C1 board.
>>
>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/Makefile             |  1 +
>>   .../arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts | 64 +++++++++++++++++++
>>   2 files changed, 65 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index b77a95e97a56..10d1eafe57e4 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-mp03.1-c2.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-mp03.5-c1.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>> new file mode 100644
>> index 000000000000..51ddd7367ac6
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
>> @@ -0,0 +1,64 @@
>> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
>> +/*
>> + * IPQ5018 CP01 board device tree source
>> + *
>> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "ipq5018.dtsi"
>> +
>> +/ {
>> +	model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1";
>> +	compatible = "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
>> +
>> +	aliases {
>> +		serial0 = &blsp1_uart1;
>> +	};
>> +
>> +	chosen {
>> +		bootargs = "console=ttyMSM0,115200,n8 rw init=/init swiotlb=1 coherent_pool=2M";
> 
> Not a common DT property. Drop.
> 
Sure, i will drop it.
>> +		stdout-path = "serial0:115200n8";
>> +	};
>> +};
>> +
>> +&tlmm {
>> +	blsp0_uart_pins: uart_pins {
> 
> Does not look like you tested the DTS against bindings. Please run `make
> dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
> for instructions).
> 
> I'll stop the review. Please first run tests.
> 
>
I will verify DTS against bindings.

Thanks & Regards,
Manikanta.

> 
> Best regards,
> Krzysztof
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index b77a95e97a56..10d1eafe57e4 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -4,6 +4,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-mp03.1-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-mp03.5-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
new file mode 100644
index 000000000000..51ddd7367ac6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
@@ -0,0 +1,64 @@ 
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5018 CP01 board device tree source
+ *
+ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5018.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1";
+	compatible = "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyMSM0,115200,n8 rw init=/init swiotlb=1 coherent_pool=2M";
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&tlmm {
+	blsp0_uart_pins: uart_pins {
+		pins = "gpio20", "gpio21";
+		function = "blsp0_uart0";
+		bias-disable;
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&blsp0_uart_pins>;
+	pinctrl-names = "default";
+	status = "ok";
+};
+
+&q6v5_wcss {
+	q6_wcss_pd1: remoteproc_pd1 {
+		interrupts-extended = <&wcss_smp2p_in 8 0>,
+				<&wcss_smp2p_in 9 0>,
+				<&wcss_smp2p_in 12 0>,
+				<&wcss_smp2p_in 11 0>;
+		interrupt-names = "fatal",
+				"ready",
+				"spawn-ack",
+				"stop-ack";
+		qcom,smem-states = <&wcss_smp2p_out 8>,
+				<&wcss_smp2p_out 9>,
+				<&wcss_smp2p_out 10>;
+		qcom,smem-state-names = "shutdown",
+					"stop",
+					"spawn";
+	};
+	q6_wcss_pd2: remoteproc_pd2 {
+		status = "okay";
+	};
+
+	q6_wcss_pd3: remoteproc_pd3 {
+		status = "okay";
+	};
+};