Message ID | 168443478260.2966470.6881416930240756285.stgit@djiang5-mobl3 |
---|---|
State | Superseded |
Headers | show |
Series | acpi: Add CDAT parsing support to ACPI tables code | expand |
Dave Jiang wrote: > Some of the routines in ACPI tables.c can be shared with parsing CDAT. s,ACPI tables.c,driver/acpi/tables.c, > However, CDAT is used by CXL and can exist on platforms that do not use > ACPI. Clarify that CDAT is not an ACPI table: CDAT is a device-provided data structure that is formatted similar to a platform-provided ACPI table. > Split out the common routine from ACPI to accomodate platforms that > do not support ACPI. The common routines can be built outside of ACPI if > ACPI_TABLES_LIB is selected. Might be just me but I get confused where this is indicating "ACPI" the platform vs "CONFIG_ACPI" the code. How about just: Refactor the table parsing routines in driver/acpi/tables.c into helpers that can be shared with the CXL driver even in the CONFIG_ACPI=n case. > > Signed-off-by: Dave Jiang <dave.jiang@intel.com> > --- > drivers/Makefile | 2 > drivers/acpi/Kconfig | 4 + > drivers/acpi/Makefile | 3 + > drivers/acpi/tables.c | 173 ---------------------------------------- > drivers/acpi/tables_lib.c | 194 +++++++++++++++++++++++++++++++++++++++++++++ > include/linux/acpi.h | 63 +++++++++------ > 6 files changed, 241 insertions(+), 198 deletions(-) > create mode 100644 drivers/acpi/tables_lib.c Conversion looks ok to me. Even though the cover letter said "Hi Rafael, Please consider these for 6.5 merge window" my expectation is to take these through CXL with ACPI acks. One question below: > diff --git a/drivers/Makefile b/drivers/Makefile > index 20b118dca999..1824797f7dfe 100644 > --- a/drivers/Makefile > +++ b/drivers/Makefile > @@ -31,7 +31,7 @@ obj-y += idle/ > # IPMI must come before ACPI in order to provide IPMI opregion support > obj-y += char/ipmi/ > > -obj-$(CONFIG_ACPI) += acpi/ > +obj-y += acpi/ > > # PnP must come after ACPI since it will eventually need to check if acpi > # was used and do nothing if so > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > index ccbeab9500ec..ce74a20dc42f 100644 > --- a/drivers/acpi/Kconfig > +++ b/drivers/acpi/Kconfig > @@ -6,12 +6,16 @@ > config ARCH_SUPPORTS_ACPI > bool > > +config ACPI_TABLES_LIB > + bool > + > menuconfig ACPI > bool "ACPI (Advanced Configuration and Power Interface) Support" > depends on ARCH_SUPPORTS_ACPI > select PNP > select NLS > select CRC32 > + select ACPI_TABLES_LIB > default y if X86 > help > Advanced Configuration and Power Interface (ACPI) support for > diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile > index feb36c0b9446..4558e2876823 100644 > --- a/drivers/acpi/Makefile > +++ b/drivers/acpi/Makefile > @@ -13,6 +13,9 @@ tables.o: $(src)/../../include/$(CONFIG_ACPI_CUSTOM_DSDT_FILE) ; > > endif > > +obj-$(CONFIG_ACPI_TABLES_LIB) += acpi_tables_lib.o > +acpi_tables_lib-y := tables_lib.o Why is a separate object name needed?
On 5/22/23 14:31, Dan Williams wrote: > Dave Jiang wrote: >> Some of the routines in ACPI tables.c can be shared with parsing CDAT. > s,ACPI tables.c,driver/acpi/tables.c, > >> However, CDAT is used by CXL and can exist on platforms that do not use >> ACPI. > Clarify that CDAT is not an ACPI table: > > CDAT is a device-provided data structure that is formatted similar to a > platform-provided ACPI table. > >> Split out the common routine from ACPI to accomodate platforms that >> do not support ACPI. The common routines can be built outside of ACPI if >> ACPI_TABLES_LIB is selected. > Might be just me but I get confused where this is indicating "ACPI" the > platform vs "CONFIG_ACPI" the code. How about just: > > Refactor the table parsing routines in driver/acpi/tables.c into helpers > that can be shared with the CXL driver even in the CONFIG_ACPI=n case. > >> Signed-off-by: Dave Jiang <dave.jiang@intel.com> >> --- >> drivers/Makefile | 2 >> drivers/acpi/Kconfig | 4 + >> drivers/acpi/Makefile | 3 + >> drivers/acpi/tables.c | 173 ---------------------------------------- >> drivers/acpi/tables_lib.c | 194 +++++++++++++++++++++++++++++++++++++++++++++ >> include/linux/acpi.h | 63 +++++++++------ >> 6 files changed, 241 insertions(+), 198 deletions(-) >> create mode 100644 drivers/acpi/tables_lib.c > Conversion looks ok to me. Even though the cover letter said "Hi Rafael, > Please consider these for 6.5 merge window" my expectation is to take > these through CXL with ACPI acks. I thought you wanted Rafael to take the ACPI patches. But going to the CXL tree works. > > One question below: > >> diff --git a/drivers/Makefile b/drivers/Makefile >> index 20b118dca999..1824797f7dfe 100644 >> --- a/drivers/Makefile >> +++ b/drivers/Makefile >> @@ -31,7 +31,7 @@ obj-y += idle/ >> # IPMI must come before ACPI in order to provide IPMI opregion support >> obj-y += char/ipmi/ >> >> -obj-$(CONFIG_ACPI) += acpi/ >> +obj-y += acpi/ >> >> # PnP must come after ACPI since it will eventually need to check if acpi >> # was used and do nothing if so >> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig >> index ccbeab9500ec..ce74a20dc42f 100644 >> --- a/drivers/acpi/Kconfig >> +++ b/drivers/acpi/Kconfig >> @@ -6,12 +6,16 @@ >> config ARCH_SUPPORTS_ACPI >> bool >> >> +config ACPI_TABLES_LIB >> + bool >> + >> menuconfig ACPI >> bool "ACPI (Advanced Configuration and Power Interface) Support" >> depends on ARCH_SUPPORTS_ACPI >> select PNP >> select NLS >> select CRC32 >> + select ACPI_TABLES_LIB >> default y if X86 >> help >> Advanced Configuration and Power Interface (ACPI) support for >> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile >> index feb36c0b9446..4558e2876823 100644 >> --- a/drivers/acpi/Makefile >> +++ b/drivers/acpi/Makefile >> @@ -13,6 +13,9 @@ tables.o: $(src)/../../include/$(CONFIG_ACPI_CUSTOM_DSDT_FILE) ; >> >> endif >> >> +obj-$(CONFIG_ACPI_TABLES_LIB) += acpi_tables_lib.o >> +acpi_tables_lib-y := tables_lib.o > Why is a separate object name needed? Not all code in tables.c will be shared. There are ACPI table parsing specific code in tables.c that CXL does not care about. Or do you mean just do obj-$(CONFIG_ACPI_TABLES_LIB) += tables_lib.o ?
Dave Jiang wrote: > > On 5/22/23 14:31, Dan Williams wrote: > > Dave Jiang wrote: > >> Some of the routines in ACPI tables.c can be shared with parsing CDAT. > > s,ACPI tables.c,driver/acpi/tables.c, > > > >> However, CDAT is used by CXL and can exist on platforms that do not use > >> ACPI. > > Clarify that CDAT is not an ACPI table: > > > > CDAT is a device-provided data structure that is formatted similar to a > > platform-provided ACPI table. > > > >> Split out the common routine from ACPI to accomodate platforms that > >> do not support ACPI. The common routines can be built outside of ACPI if > >> ACPI_TABLES_LIB is selected. > > Might be just me but I get confused where this is indicating "ACPI" the > > platform vs "CONFIG_ACPI" the code. How about just: > > > > Refactor the table parsing routines in driver/acpi/tables.c into helpers > > that can be shared with the CXL driver even in the CONFIG_ACPI=n case. > > > >> Signed-off-by: Dave Jiang <dave.jiang@intel.com> > >> --- > >> drivers/Makefile | 2 > >> drivers/acpi/Kconfig | 4 + > >> drivers/acpi/Makefile | 3 + > >> drivers/acpi/tables.c | 173 ---------------------------------------- > >> drivers/acpi/tables_lib.c | 194 +++++++++++++++++++++++++++++++++++++++++++++ > >> include/linux/acpi.h | 63 +++++++++------ > >> 6 files changed, 241 insertions(+), 198 deletions(-) > >> create mode 100644 drivers/acpi/tables_lib.c > > Conversion looks ok to me. Even though the cover letter said "Hi Rafael, > > Please consider these for 6.5 merge window" my expectation is to take > > these through CXL with ACPI acks. > > I thought you wanted Rafael to take the ACPI patches. But going to the > CXL tree works. Ultimately up to Rafael. Either need a stable ACPI tree baseline to base the CDAT work upon, or take this all through CXL. > > > > > One question below: > > > >> diff --git a/drivers/Makefile b/drivers/Makefile > >> index 20b118dca999..1824797f7dfe 100644 > >> --- a/drivers/Makefile > >> +++ b/drivers/Makefile > >> @@ -31,7 +31,7 @@ obj-y += idle/ > >> # IPMI must come before ACPI in order to provide IPMI opregion support > >> obj-y += char/ipmi/ > >> > >> -obj-$(CONFIG_ACPI) += acpi/ > >> +obj-y += acpi/ > >> > >> # PnP must come after ACPI since it will eventually need to check if acpi > >> # was used and do nothing if so > >> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > >> index ccbeab9500ec..ce74a20dc42f 100644 > >> --- a/drivers/acpi/Kconfig > >> +++ b/drivers/acpi/Kconfig > >> @@ -6,12 +6,16 @@ > >> config ARCH_SUPPORTS_ACPI > >> bool > >> > >> +config ACPI_TABLES_LIB > >> + bool > >> + > >> menuconfig ACPI > >> bool "ACPI (Advanced Configuration and Power Interface) Support" > >> depends on ARCH_SUPPORTS_ACPI > >> select PNP > >> select NLS > >> select CRC32 > >> + select ACPI_TABLES_LIB > >> default y if X86 > >> help > >> Advanced Configuration and Power Interface (ACPI) support for > >> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile > >> index feb36c0b9446..4558e2876823 100644 > >> --- a/drivers/acpi/Makefile > >> +++ b/drivers/acpi/Makefile > >> @@ -13,6 +13,9 @@ tables.o: $(src)/../../include/$(CONFIG_ACPI_CUSTOM_DSDT_FILE) ; > >> > >> endif > >> > >> +obj-$(CONFIG_ACPI_TABLES_LIB) += acpi_tables_lib.o > >> +acpi_tables_lib-y := tables_lib.o > > Why is a separate object name needed? > > Not all code in tables.c will be shared. There are ACPI table parsing > specific code in tables.c that CXL does not care about. Or do you mean > just do > > obj-$(CONFIG_ACPI_TABLES_LIB) += tables_lib.o Yes, this.
On Tue, May 23, 2023 at 12:25 AM Dan Williams <dan.j.williams@intel.com> wrote: > > Dave Jiang wrote: > > > > On 5/22/23 14:31, Dan Williams wrote: > > > Dave Jiang wrote: > > >> Some of the routines in ACPI tables.c can be shared with parsing CDAT. > > > s,ACPI tables.c,driver/acpi/tables.c, > > > > > >> However, CDAT is used by CXL and can exist on platforms that do not use > > >> ACPI. > > > Clarify that CDAT is not an ACPI table: > > > > > > CDAT is a device-provided data structure that is formatted similar to a > > > platform-provided ACPI table. > > > > > >> Split out the common routine from ACPI to accomodate platforms that > > >> do not support ACPI. The common routines can be built outside of ACPI if > > >> ACPI_TABLES_LIB is selected. > > > Might be just me but I get confused where this is indicating "ACPI" the > > > platform vs "CONFIG_ACPI" the code. How about just: > > > > > > Refactor the table parsing routines in driver/acpi/tables.c into helpers > > > that can be shared with the CXL driver even in the CONFIG_ACPI=n case. > > > > > >> Signed-off-by: Dave Jiang <dave.jiang@intel.com> > > >> --- > > >> drivers/Makefile | 2 > > >> drivers/acpi/Kconfig | 4 + > > >> drivers/acpi/Makefile | 3 + > > >> drivers/acpi/tables.c | 173 ---------------------------------------- > > >> drivers/acpi/tables_lib.c | 194 +++++++++++++++++++++++++++++++++++++++++++++ > > >> include/linux/acpi.h | 63 +++++++++------ > > >> 6 files changed, 241 insertions(+), 198 deletions(-) > > >> create mode 100644 drivers/acpi/tables_lib.c > > > Conversion looks ok to me. Even though the cover letter said "Hi Rafael, > > > Please consider these for 6.5 merge window" my expectation is to take > > > these through CXL with ACPI acks. > > > > I thought you wanted Rafael to take the ACPI patches. But going to the > > CXL tree works. > > Ultimately up to Rafael. Either need a stable ACPI tree baseline to base > the CDAT work upon, or take this all through CXL. AFAIAC, it can go in via the CXL tree, but see below. > > > > > > > > One question below: > > > > > >> diff --git a/drivers/Makefile b/drivers/Makefile > > >> index 20b118dca999..1824797f7dfe 100644 > > >> --- a/drivers/Makefile > > >> +++ b/drivers/Makefile > > >> @@ -31,7 +31,7 @@ obj-y += idle/ > > >> # IPMI must come before ACPI in order to provide IPMI opregion support > > >> obj-y += char/ipmi/ > > >> > > >> -obj-$(CONFIG_ACPI) += acpi/ > > >> +obj-y += acpi/ > > >> > > >> # PnP must come after ACPI since it will eventually need to check if acpi > > >> # was used and do nothing if so > > >> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > > >> index ccbeab9500ec..ce74a20dc42f 100644 > > >> --- a/drivers/acpi/Kconfig > > >> +++ b/drivers/acpi/Kconfig > > >> @@ -6,12 +6,16 @@ > > >> config ARCH_SUPPORTS_ACPI > > >> bool > > >> > > >> +config ACPI_TABLES_LIB > > >> + bool > > >> + > > >> menuconfig ACPI > > >> bool "ACPI (Advanced Configuration and Power Interface) Support" > > >> depends on ARCH_SUPPORTS_ACPI > > >> select PNP > > >> select NLS > > >> select CRC32 > > >> + select ACPI_TABLES_LIB > > >> default y if X86 > > >> help > > >> Advanced Configuration and Power Interface (ACPI) support for > > >> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile > > >> index feb36c0b9446..4558e2876823 100644 > > >> --- a/drivers/acpi/Makefile > > >> +++ b/drivers/acpi/Makefile > > >> @@ -13,6 +13,9 @@ tables.o: $(src)/../../include/$(CONFIG_ACPI_CUSTOM_DSDT_FILE) ; > > >> > > >> endif > > >> > > >> +obj-$(CONFIG_ACPI_TABLES_LIB) += acpi_tables_lib.o > > >> +acpi_tables_lib-y := tables_lib.o > > > Why is a separate object name needed? > > > > Not all code in tables.c will be shared. There are ACPI table parsing > > specific code in tables.c that CXL does not care about. Or do you mean > > just do > > > > obj-$(CONFIG_ACPI_TABLES_LIB) += tables_lib.o > > Yes, this. First, this depends on what is there in tables_lib.c. IMV it should not contain stuff that is not needed for CDAT parsing. Second, I'm not sure if drivers/acpi/ is the most appropriate location for it, maybe lib/ would be less confusing?
On Thu, 18 May 2023 11:33:02 -0700 Dave Jiang <dave.jiang@intel.com> wrote: > Some of the routines in ACPI tables.c can be shared with parsing CDAT. > However, CDAT is used by CXL and can exist on platforms that do not use > ACPI. Split out the common routine from ACPI to accomodate platforms that > do not support ACPI. The common routines can be built outside of ACPI if > ACPI_TABLES_LIB is selected. > > Signed-off-by: Dave Jiang <dave.jiang@intel.com> Comment inline - otherwise looks fine to me. Jonathan > diff --git a/drivers/acpi/tables_lib.c b/drivers/acpi/tables_lib.c > new file mode 100644 > index 000000000000..701001610fa9 > --- /dev/null > +++ b/drivers/acpi/tables_lib.c > @@ -0,0 +1,194 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * acpi_tables.c - ACPI Boot-Time Table Parsing > + * > + * Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> > + */ > + > +/* Uncomment next line to get verbose printout */ > +/* #define DEBUG */ > +#define pr_fmt(fmt) "ACPI: " fmt > + > +#include <linux/init.h> > +#include <linux/kernel.h> > +#include <linux/smp.h> > +#include <linux/string.h> > +#include <linux/types.h> > +#include <linux/irq.h> Check these includes are all needed by this subset of the original file. Also could take opportunity to put what is left in alphabetical order or some other convention. > +#include <linux/errno.h> > +#include <linux/acpi.h> > +#include <linux/memblock.h> > +#include <linux/earlycpio.h> > +#include <linux/initrd.h> > +#include <linux/security.h> > +#include <linux/kmemleak.h> ...
On 6/1/23 07:50, Jonathan Cameron wrote: > On Thu, 18 May 2023 11:33:02 -0700 > Dave Jiang <dave.jiang@intel.com> wrote: > >> Some of the routines in ACPI tables.c can be shared with parsing CDAT. >> However, CDAT is used by CXL and can exist on platforms that do not use >> ACPI. Split out the common routine from ACPI to accomodate platforms that >> do not support ACPI. The common routines can be built outside of ACPI if >> ACPI_TABLES_LIB is selected. >> >> Signed-off-by: Dave Jiang <dave.jiang@intel.com> > Comment inline - otherwise looks fine to me. > > Jonathan > >> diff --git a/drivers/acpi/tables_lib.c b/drivers/acpi/tables_lib.c >> new file mode 100644 >> index 000000000000..701001610fa9 >> --- /dev/null >> +++ b/drivers/acpi/tables_lib.c >> @@ -0,0 +1,194 @@ >> +// SPDX-License-Identifier: GPL-2.0-or-later >> +/* >> + * acpi_tables.c - ACPI Boot-Time Table Parsing >> + * >> + * Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> >> + */ >> + >> +/* Uncomment next line to get verbose printout */ >> +/* #define DEBUG */ >> +#define pr_fmt(fmt) "ACPI: " fmt >> + >> +#include <linux/init.h> >> +#include <linux/kernel.h> >> +#include <linux/smp.h> >> +#include <linux/string.h> >> +#include <linux/types.h> >> +#include <linux/irq.h> > Check these includes are all needed by this subset of the > original file. > > Also could take opportunity to put what is left in > alphabetical order or some other convention. Sure I'll clean that up. > > >> +#include <linux/errno.h> >> +#include <linux/acpi.h> >> +#include <linux/memblock.h> >> +#include <linux/earlycpio.h> >> +#include <linux/initrd.h> >> +#include <linux/security.h> >> +#include <linux/kmemleak.h> > ... >
diff --git a/drivers/Makefile b/drivers/Makefile index 20b118dca999..1824797f7dfe 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -31,7 +31,7 @@ obj-y += idle/ # IPMI must come before ACPI in order to provide IPMI opregion support obj-y += char/ipmi/ -obj-$(CONFIG_ACPI) += acpi/ +obj-y += acpi/ # PnP must come after ACPI since it will eventually need to check if acpi # was used and do nothing if so diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index ccbeab9500ec..ce74a20dc42f 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -6,12 +6,16 @@ config ARCH_SUPPORTS_ACPI bool +config ACPI_TABLES_LIB + bool + menuconfig ACPI bool "ACPI (Advanced Configuration and Power Interface) Support" depends on ARCH_SUPPORTS_ACPI select PNP select NLS select CRC32 + select ACPI_TABLES_LIB default y if X86 help Advanced Configuration and Power Interface (ACPI) support for diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index feb36c0b9446..4558e2876823 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -13,6 +13,9 @@ tables.o: $(src)/../../include/$(CONFIG_ACPI_CUSTOM_DSDT_FILE) ; endif +obj-$(CONFIG_ACPI_TABLES_LIB) += acpi_tables_lib.o +acpi_tables_lib-y := tables_lib.o + obj-$(CONFIG_ACPI) += tables.o obj-$(CONFIG_X86) += blacklist.o diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index 7b4680da57d7..cfc76efd8788 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -37,18 +37,6 @@ static struct acpi_table_desc initial_tables[ACPI_MAX_TABLES] __initdata; static int acpi_apic_instance __initdata_or_acpilib; -enum acpi_subtable_type { - ACPI_SUBTABLE_COMMON, - ACPI_SUBTABLE_HMAT, - ACPI_SUBTABLE_PRMT, - ACPI_SUBTABLE_CEDT, -}; - -struct acpi_subtable_entry { - union acpi_subtable_headers *hdr; - enum acpi_subtable_type type; -}; - /* * Disable table checksum verification for the early stage due to the size * limitation of the current x86 early mapping implementation. @@ -227,167 +215,6 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header) } } -static unsigned long __init_or_acpilib -acpi_get_entry_type(struct acpi_subtable_entry *entry) -{ - switch (entry->type) { - case ACPI_SUBTABLE_COMMON: - return entry->hdr->common.type; - case ACPI_SUBTABLE_HMAT: - return entry->hdr->hmat.type; - case ACPI_SUBTABLE_PRMT: - return 0; - case ACPI_SUBTABLE_CEDT: - return entry->hdr->cedt.type; - } - return 0; -} - -static unsigned long __init_or_acpilib -acpi_get_entry_length(struct acpi_subtable_entry *entry) -{ - switch (entry->type) { - case ACPI_SUBTABLE_COMMON: - return entry->hdr->common.length; - case ACPI_SUBTABLE_HMAT: - return entry->hdr->hmat.length; - case ACPI_SUBTABLE_PRMT: - return entry->hdr->prmt.length; - case ACPI_SUBTABLE_CEDT: - return entry->hdr->cedt.length; - } - return 0; -} - -static unsigned long __init_or_acpilib -acpi_get_subtable_header_length(struct acpi_subtable_entry *entry) -{ - switch (entry->type) { - case ACPI_SUBTABLE_COMMON: - return sizeof(entry->hdr->common); - case ACPI_SUBTABLE_HMAT: - return sizeof(entry->hdr->hmat); - case ACPI_SUBTABLE_PRMT: - return sizeof(entry->hdr->prmt); - case ACPI_SUBTABLE_CEDT: - return sizeof(entry->hdr->cedt); - } - return 0; -} - -static enum acpi_subtable_type __init_or_acpilib -acpi_get_subtable_type(char *id) -{ - if (strncmp(id, ACPI_SIG_HMAT, 4) == 0) - return ACPI_SUBTABLE_HMAT; - if (strncmp(id, ACPI_SIG_PRMT, 4) == 0) - return ACPI_SUBTABLE_PRMT; - if (strncmp(id, ACPI_SIG_CEDT, 4) == 0) - return ACPI_SUBTABLE_CEDT; - return ACPI_SUBTABLE_COMMON; -} - -static __init_or_acpilib bool has_handler(struct acpi_subtable_proc *proc) -{ - return proc->handler || proc->handler_arg; -} - -static __init_or_acpilib int call_handler(struct acpi_subtable_proc *proc, - union acpi_subtable_headers *hdr, - unsigned long end) -{ - if (proc->handler) - return proc->handler(hdr, end); - if (proc->handler_arg) - return proc->handler_arg(hdr, proc->arg, end); - return -EINVAL; -} - -/** - * acpi_parse_entries_array - for each proc_num find a suitable subtable - * - * @id: table id (for debugging purposes) - * @table_size: size of the root table - * @table_header: where does the table start? - * @proc: array of acpi_subtable_proc struct containing entry id - * and associated handler with it - * @proc_num: how big proc is? - * @max_entries: how many entries can we process? - * - * For each proc_num find a subtable with proc->id and run proc->handler - * on it. Assumption is that there's only single handler for particular - * entry id. - * - * The table_size is not the size of the complete ACPI table (the length - * field in the header struct), but only the size of the root table; i.e., - * the offset from the very first byte of the complete ACPI table, to the - * first byte of the very first subtable. - * - * On success returns sum of all matching entries for all proc handlers. - * Otherwise, -ENODEV or -EINVAL is returned. - */ -static int __init_or_acpilib acpi_parse_entries_array( - char *id, unsigned long table_size, - struct acpi_table_header *table_header, struct acpi_subtable_proc *proc, - int proc_num, unsigned int max_entries) -{ - struct acpi_subtable_entry entry; - unsigned long table_end, subtable_len, entry_len; - int count = 0; - int errs = 0; - int i; - - table_end = (unsigned long)table_header + table_header->length; - - /* Parse all entries looking for a match. */ - - entry.type = acpi_get_subtable_type(id); - entry.hdr = (union acpi_subtable_headers *) - ((unsigned long)table_header + table_size); - subtable_len = acpi_get_subtable_header_length(&entry); - - while (((unsigned long)entry.hdr) + subtable_len < table_end) { - if (max_entries && count >= max_entries) - break; - - for (i = 0; i < proc_num; i++) { - if (acpi_get_entry_type(&entry) != proc[i].id) - continue; - if (!has_handler(&proc[i]) || - (!errs && - call_handler(&proc[i], entry.hdr, table_end))) { - errs++; - continue; - } - - proc[i].count++; - break; - } - if (i != proc_num) - count++; - - /* - * If entry->length is 0, break from this loop to avoid - * infinite loop. - */ - entry_len = acpi_get_entry_length(&entry); - if (entry_len == 0) { - pr_err("[%4.4s:0x%02x] Invalid zero length\n", id, proc->id); - return -EINVAL; - } - - entry.hdr = (union acpi_subtable_headers *) - ((unsigned long)entry.hdr + entry_len); - } - - if (max_entries && count > max_entries) { - pr_warn("[%4.4s:0x%02x] found the maximum %i entries\n", - id, proc->id, count); - } - - return errs ? -EINVAL : count; -} - int __init_or_acpilib acpi_table_parse_entries_array( char *id, unsigned long table_size, struct acpi_subtable_proc *proc, int proc_num, unsigned int max_entries) diff --git a/drivers/acpi/tables_lib.c b/drivers/acpi/tables_lib.c new file mode 100644 index 000000000000..701001610fa9 --- /dev/null +++ b/drivers/acpi/tables_lib.c @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * acpi_tables.c - ACPI Boot-Time Table Parsing + * + * Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> + */ + +/* Uncomment next line to get verbose printout */ +/* #define DEBUG */ +#define pr_fmt(fmt) "ACPI: " fmt + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/irq.h> +#include <linux/errno.h> +#include <linux/acpi.h> +#include <linux/memblock.h> +#include <linux/earlycpio.h> +#include <linux/initrd.h> +#include <linux/security.h> +#include <linux/kmemleak.h> + +enum acpi_subtable_type { + ACPI_SUBTABLE_COMMON, + ACPI_SUBTABLE_HMAT, + ACPI_SUBTABLE_PRMT, + ACPI_SUBTABLE_CEDT, +}; + +struct acpi_subtable_entry { + union acpi_subtable_headers *hdr; + enum acpi_subtable_type type; +}; + +static unsigned long acpi_get_entry_type(struct acpi_subtable_entry *entry) +{ + switch (entry->type) { + case ACPI_SUBTABLE_COMMON: + return entry->hdr->common.type; + case ACPI_SUBTABLE_HMAT: + return entry->hdr->hmat.type; + case ACPI_SUBTABLE_PRMT: + return 0; + case ACPI_SUBTABLE_CEDT: + return entry->hdr->cedt.type; + } + return 0; +} + +static unsigned long acpi_get_entry_length(struct acpi_subtable_entry *entry) +{ + switch (entry->type) { + case ACPI_SUBTABLE_COMMON: + return entry->hdr->common.length; + case ACPI_SUBTABLE_HMAT: + return entry->hdr->hmat.length; + case ACPI_SUBTABLE_PRMT: + return entry->hdr->prmt.length; + case ACPI_SUBTABLE_CEDT: + return entry->hdr->cedt.length; + } + return 0; +} + +static unsigned long +acpi_get_subtable_header_length(struct acpi_subtable_entry *entry) +{ + switch (entry->type) { + case ACPI_SUBTABLE_COMMON: + return sizeof(entry->hdr->common); + case ACPI_SUBTABLE_HMAT: + return sizeof(entry->hdr->hmat); + case ACPI_SUBTABLE_PRMT: + return sizeof(entry->hdr->prmt); + case ACPI_SUBTABLE_CEDT: + return sizeof(entry->hdr->cedt); + } + return 0; +} + +static enum acpi_subtable_type acpi_get_subtable_type(char *id) +{ + if (strncmp(id, ACPI_SIG_HMAT, 4) == 0) + return ACPI_SUBTABLE_HMAT; + if (strncmp(id, ACPI_SIG_PRMT, 4) == 0) + return ACPI_SUBTABLE_PRMT; + if (strncmp(id, ACPI_SIG_CEDT, 4) == 0) + return ACPI_SUBTABLE_CEDT; + return ACPI_SUBTABLE_COMMON; +} + +static bool has_handler(struct acpi_subtable_proc *proc) +{ + return proc->handler || proc->handler_arg; +} + +static int call_handler(struct acpi_subtable_proc *proc, + union acpi_subtable_headers *hdr, unsigned long end) +{ + if (proc->handler) + return proc->handler(hdr, end); + if (proc->handler_arg) + return proc->handler_arg(hdr, proc->arg, end); + return -EINVAL; +} + +/** + * acpi_parse_entries_array - for each proc_num find a suitable subtable + * + * @id: table id (for debugging purposes) + * @table_size: size of the root table + * @table_header: where does the table start? + * @proc: array of acpi_subtable_proc struct containing entry id + * and associated handler with it + * @proc_num: how big proc is? + * @max_entries: how many entries can we process? + * + * For each proc_num find a subtable with proc->id and run proc->handler + * on it. Assumption is that there's only single handler for particular + * entry id. + * + * The table_size is not the size of the complete ACPI table (the length + * field in the header struct), but only the size of the root table; i.e., + * the offset from the very first byte of the complete ACPI table, to the + * first byte of the very first subtable. + * + * On success returns sum of all matching entries for all proc handlers. + * Otherwise, -ENODEV or -EINVAL is returned. + */ +int acpi_parse_entries_array(char *id, unsigned long table_size, + struct acpi_table_header *table_header, + struct acpi_subtable_proc *proc, + int proc_num, unsigned int max_entries) +{ + struct acpi_subtable_entry entry; + unsigned long table_end, subtable_len, entry_len; + int count = 0; + int errs = 0; + int i; + + table_end = (unsigned long)table_header + table_header->length; + + /* Parse all entries looking for a match. */ + + entry.type = acpi_get_subtable_type(id); + entry.hdr = (union acpi_subtable_headers *) + ((unsigned long)table_header + table_size); + subtable_len = acpi_get_subtable_header_length(&entry); + + while (((unsigned long)entry.hdr) + subtable_len < table_end) { + if (max_entries && count >= max_entries) + break; + + for (i = 0; i < proc_num; i++) { + if (acpi_get_entry_type(&entry) != proc[i].id) + continue; + if (!has_handler(&proc[i]) || + (!errs && + call_handler(&proc[i], entry.hdr, table_end))) { + errs++; + continue; + } + + proc[i].count++; + break; + } + if (i != proc_num) + count++; + + /* + * If entry->length is 0, break from this loop to avoid + * infinite loop. + */ + entry_len = acpi_get_entry_length(&entry); + if (entry_len == 0) { + pr_err("[%4.4s:0x%02x] Invalid zero length\n", id, proc->id); + return -EINVAL; + } + + entry.hdr = (union acpi_subtable_headers *) + ((unsigned long)entry.hdr + entry_len); + } + + if (max_entries && count > max_entries) { + pr_warn("[%4.4s:0x%02x] found the maximum %i entries\n", + id, proc->id, count); + } + + return errs ? -EINVAL : count; +} +EXPORT_SYMBOL_GPL(acpi_parse_entries_array); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index efff750f326d..57ffba91bfb5 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -21,6 +21,30 @@ #endif #include <acpi/acpi.h> +/* Table Handlers */ +union acpi_subtable_headers { + struct acpi_subtable_header common; + struct acpi_hmat_structure hmat; + struct acpi_prmt_module_header prmt; + struct acpi_cedt_header cedt; +}; + +typedef int (*acpi_tbl_table_handler)(struct acpi_table_header *table); + +typedef int (*acpi_tbl_entry_handler)(union acpi_subtable_headers *header, + const unsigned long end); + +typedef int (*acpi_tbl_entry_handler_arg)(union acpi_subtable_headers *header, + void *arg, const unsigned long end); + +struct acpi_subtable_proc { + int id; + acpi_tbl_entry_handler handler; + acpi_tbl_entry_handler_arg handler_arg; + void *arg; + int count; +}; + #ifdef CONFIG_ACPI #include <linux/list.h> @@ -129,22 +153,6 @@ enum acpi_address_range_id { }; -/* Table Handlers */ -union acpi_subtable_headers { - struct acpi_subtable_header common; - struct acpi_hmat_structure hmat; - struct acpi_prmt_module_header prmt; - struct acpi_cedt_header cedt; -}; - -typedef int (*acpi_tbl_table_handler)(struct acpi_table_header *table); - -typedef int (*acpi_tbl_entry_handler)(union acpi_subtable_headers *header, - const unsigned long end); - -typedef int (*acpi_tbl_entry_handler_arg)(union acpi_subtable_headers *header, - void *arg, const unsigned long end); - /* Debugger support */ struct acpi_debugger_ops { @@ -218,14 +226,6 @@ static inline int acpi_debugger_notify_command_complete(void) (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ ((struct acpi_subtable_header *)entry)->length < sizeof(*entry)) -struct acpi_subtable_proc { - int id; - acpi_tbl_entry_handler handler; - acpi_tbl_entry_handler_arg handler_arg; - void *arg; - int count; -}; - void __iomem *__acpi_map_table(unsigned long phys, unsigned long size); void __acpi_unmap_table(void __iomem *map, unsigned long size); int early_acpi_boot_init(void); @@ -1524,4 +1524,19 @@ static inline void acpi_device_notify(struct device *dev) { } static inline void acpi_device_notify_remove(struct device *dev) { } #endif +#ifdef CONFIG_ACPI_TABLES_LIB +int acpi_parse_entries_array(char *id, unsigned long table_size, + struct acpi_table_header *table_header, + struct acpi_subtable_proc *proc, + int proc_num, unsigned int max_entries); +#else +static inline int acpi_parse_entries_array( + char *id, unsigned long table_size, + struct acpi_table_header *table_header, struct acpi_subtable_proc *proc, + int proc_num, unsigned int max_entries) +{ + return -EOPNOTSUPP; +} +#endif + #endif /*_LINUX_ACPI_H*/
Some of the routines in ACPI tables.c can be shared with parsing CDAT. However, CDAT is used by CXL and can exist on platforms that do not use ACPI. Split out the common routine from ACPI to accomodate platforms that do not support ACPI. The common routines can be built outside of ACPI if ACPI_TABLES_LIB is selected. Signed-off-by: Dave Jiang <dave.jiang@intel.com> --- drivers/Makefile | 2 drivers/acpi/Kconfig | 4 + drivers/acpi/Makefile | 3 + drivers/acpi/tables.c | 173 ---------------------------------------- drivers/acpi/tables_lib.c | 194 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/acpi.h | 63 +++++++++------ 6 files changed, 241 insertions(+), 198 deletions(-) create mode 100644 drivers/acpi/tables_lib.c