diff mbox series

crypto: starfive - Depend on AMBA_PL08X instead of selecting it

Message ID ZGwmAp5RPqAjVMCg@gondor.apana.org.au (mailing list archive)
State Accepted
Delegated to: Herbert Xu
Headers show
Series crypto: starfive - Depend on AMBA_PL08X instead of selecting it | expand

Commit Message

Herbert Xu May 23, 2023, 2:33 a.m. UTC 
On Tue, May 23, 2023 at 10:36:37AM +1000, Stephen Rothwell wrote:
> 
> That did not fix it :-(

OK, this patch should fix it:

---8<---
A platform option like AMBA should never be selected by a driver.
Use a dependency instead.

Also remove the depenency on DMADEVICES because the driver builds
just fine without it.  Instead add a dependency on HAS_DMA for dma
mapping support.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Conor Dooley <conor.dooley@microchip.com> 
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Comments

Conor Dooley May 23, 2023, 6:56 a.m. UTC | #1 
On Tue, May 23, 2023 at 10:33:38AM +0800, Herbert Xu wrote:
> On Tue, May 23, 2023 at 10:36:37AM +1000, Stephen Rothwell wrote:
> > 
> > That did not fix it :-(
> 
> OK, this patch should fix it:
> 
> ---8<---
> A platform option like AMBA should never be selected by a driver.
> Use a dependency instead.

Randy submitted a patch to change the driver to not conflict with
the arch symbols:
https://lore.kernel.org/all/20230523000606.9405-1-rdunlap@infradead.org/

The corresponding change here makes sense to me,
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

@StarFive folks, you will need to go and submit a patch for
arch/riscv/Kconfig.socs that selects ARM_AMBA for your platform.

> Also remove the depenency on DMADEVICES because the driver builds
> just fine without it.  Instead add a dependency on HAS_DMA for dma
> mapping support.
> 
> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
> Reported-by: Conor Dooley <conor.dooley@microchip.com> 
> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
> 
> diff --git a/drivers/crypto/starfive/Kconfig b/drivers/crypto/starfive/Kconfig
> index 908c162ba79a..59002abcc0ad 100644
> --- a/drivers/crypto/starfive/Kconfig
> +++ b/drivers/crypto/starfive/Kconfig
> @@ -4,14 +4,13 @@
>  
>  config CRYPTO_DEV_JH7110
>  	tristate "StarFive JH7110 cryptographic engine driver"
> -	depends on (SOC_STARFIVE || COMPILE_TEST) && DMADEVICES
> +	depends on SOC_STARFIVE || AMBA_PL08X || COMPILE_TEST

While we are changing everything, would you mind doing s/SOC/ARCH/ here?
I didn't notice that while the series was being reviewed. Otherwise,
I'll send you a patch for it.

Cheers,
Conor.
Jia Jie Ho May 23, 2023, 7:31 a.m. UTC | #2 
On 23/5/2023 2:56 pm, Conor Dooley wrote:
> On Tue, May 23, 2023 at 10:33:38AM +0800, Herbert Xu wrote:
>> On Tue, May 23, 2023 at 10:36:37AM +1000, Stephen Rothwell wrote:
>> > 
>> > That did not fix it :-(
>> 
>> OK, this patch should fix it:
>> 
>> ---8<---
>> A platform option like AMBA should never be selected by a driver.
>> Use a dependency instead.
> 
> Randy submitted a patch to change the driver to not conflict with
> the arch symbols:
> https://lore.kernel.org/all/20230523000606.9405-1-rdunlap@infradead.org/
> 
> The corresponding change here makes sense to me,
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> 
> @StarFive folks, you will need to go and submit a patch for
> arch/riscv/Kconfig.socs that selects ARM_AMBA for your platform.
> 

Sure, I'll submit a patch for this.

Thanks
Jia Jie
Stephen Rothwell May 25, 2023, 1:25 a.m. UTC | #3 
Hi Herbert,

On Tue, 23 May 2023 10:33:38 +0800 Herbert Xu <herbert@gondor.apana.org.au> wrote:
>
> On Tue, May 23, 2023 at 10:36:37AM +1000, Stephen Rothwell wrote:
> > 
> > That did not fix it :-(  
> 
> OK, this patch should fix it:

That seems to have fixed it, thanks.
Geert Uytterhoeven June 6, 2023, 9:12 a.m. UTC | #4 
Hi Herbert,

On Tue, May 23, 2023 at 4:40 AM Herbert Xu <herbert@gondor.apana.org.au> wrote:
> On Tue, May 23, 2023 at 10:36:37AM +1000, Stephen Rothwell wrote:
> > That did not fix it :-(
>
> OK, this patch should fix it:
>
> ---8<---
> A platform option like AMBA should never be selected by a driver.
> Use a dependency instead.

FTR:

arch/arm/mach-s3c/Kconfig.s3c64xx=config S3C64XX_PL080
arch/arm/mach-s3c/Kconfig.s3c64xx-      def_bool DMADEVICES
arch/arm/mach-s3c/Kconfig.s3c64xx:      select AMBA_PL08X

>
> Also remove the depenency on DMADEVICES because the driver builds
> just fine without it.  Instead add a dependency on HAS_DMA for dma
> mapping support.
>
> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
> Reported-by: Conor Dooley <conor.dooley@microchip.com>
> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
>
> diff --git a/drivers/crypto/starfive/Kconfig b/drivers/crypto/starfive/Kconfig
> index 908c162ba79a..59002abcc0ad 100644
> --- a/drivers/crypto/starfive/Kconfig
> +++ b/drivers/crypto/starfive/Kconfig
> @@ -4,14 +4,13 @@
>
>  config CRYPTO_DEV_JH7110
>         tristate "StarFive JH7110 cryptographic engine driver"
> -       depends on (SOC_STARFIVE || COMPILE_TEST) && DMADEVICES
> +       depends on SOC_STARFIVE || AMBA_PL08X || COMPILE_TEST
> +       depends on HAS_DMA
>         select CRYPTO_ENGINE
>         select CRYPTO_HMAC
>         select CRYPTO_SHA256
>         select CRYPTO_SHA512
>         select CRYPTO_SM3_GENERIC
> -       select ARM_AMBA
> -       select AMBA_PL08X
>         help
>           Support for StarFive JH7110 crypto hardware acceleration engine.
>           This module provides acceleration for public key algo,

Gr{oetje,eeting}s,

                        Geert
Herbert Xu June 6, 2023, 9:31 a.m. UTC | #5 
On Tue, Jun 06, 2023 at 11:12:05AM +0200, Geert Uytterhoeven wrote:
>
> > ---8<---
> > A platform option like AMBA should never be selected by a driver.
> > Use a dependency instead.
> 
> FTR:
> 
> arch/arm/mach-s3c/Kconfig.s3c64xx=config S3C64XX_PL080
> arch/arm/mach-s3c/Kconfig.s3c64xx-      def_bool DMADEVICES
> arch/arm/mach-s3c/Kconfig.s3c64xx:      select AMBA_PL08X

Well that isn't a driver I think so it might be OK?

Cheers,
Geert Uytterhoeven June 6, 2023, 9:34 a.m. UTC | #6 
Hi Herbert,

On Tue, Jun 6, 2023 at 11:31 AM Herbert Xu <herbert@gondor.apana.org.au> wrote:
> On Tue, Jun 06, 2023 at 11:12:05AM +0200, Geert Uytterhoeven wrote:
> >
> > > ---8<---
> > > A platform option like AMBA should never be selected by a driver.
> > > Use a dependency instead.
> >
> > FTR:
> >
> > arch/arm/mach-s3c/Kconfig.s3c64xx=config S3C64XX_PL080
> > arch/arm/mach-s3c/Kconfig.s3c64xx-      def_bool DMADEVICES
> > arch/arm/mach-s3c/Kconfig.s3c64xx:      select AMBA_PL08X
>
> Well that isn't a driver I think so it might be OK?

Thanks, please ignore ;-)

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/crypto/starfive/Kconfig b/drivers/crypto/starfive/Kconfig
index 908c162ba79a..59002abcc0ad 100644
--- a/drivers/crypto/starfive/Kconfig
+++ b/drivers/crypto/starfive/Kconfig
@@ -4,14 +4,13 @@ 
 
 config CRYPTO_DEV_JH7110
 	tristate "StarFive JH7110 cryptographic engine driver"
-	depends on (SOC_STARFIVE || COMPILE_TEST) && DMADEVICES
+	depends on SOC_STARFIVE || AMBA_PL08X || COMPILE_TEST
+	depends on HAS_DMA
 	select CRYPTO_ENGINE
 	select CRYPTO_HMAC
 	select CRYPTO_SHA256
 	select CRYPTO_SHA512
 	select CRYPTO_SM3_GENERIC
-	select ARM_AMBA
-	select AMBA_PL08X
 	help
 	  Support for StarFive JH7110 crypto hardware acceleration engine.
 	  This module provides acceleration for public key algo,