| Message ID | 6de4448e9fe46d706bdeddb71ba6923d89ea8f4d.1685082026.git.mazziesaccount@gmail.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | fix fwnode_irq_get[_byname()] returnvalue | expand |
On Fri, 26 May 2023 09:39:14 +0300 Matti Vaittinen <mazziesaccount@gmail.com> wrote: > fwnode_irq_get[_byname]() were changed to not return 0 anymore. The > special error case where device-tree based IRQ mapping fails can't no > longer be reliably detected from this return value. This yields a > functional change in the driver where the mapping failure is treated as > an error. > > The mapping failure can occur for example when the device-tree IRQ > information translation call-back(s) (xlate) fail, IRQ domain is not > found, IRQ type conflicts, etc. In most cases this indicates an error in > the device-tree and special handling is not really required. > > One more thing to note is that ACPI APIs do not return zero for any > failures so this special handling did only apply on device-tree based > systems. > > Drop the special handling for DT mapping failures as these can no longer > be separated from other errors at driver side. Change all failures in > IRQ getting to be handled by continuing without the events instead of > aborting the probe upon certain errors. > > Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> I think this is the best we can do, though ideally I'd like to have seen errors due to not being provided by firmware passed through and firmware bug issues (where it provides an irq we can't get for some reason shouted about - with the driver failing to probe.) Still, it's an improvement and for some FW old code wouldn't have done this either. Hence let's go with this approach. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > --- > Revision history: > v5 => v6: > - Never abort the probe when IRQ getting fails but continue without > events. > > Please note that I don't have the hardware to test this change. > Furthermore, testing this type of device-tree error cases is not > trivial, as the question we probably dive in is "what happens with the > existing users who have errors in the device-tree". Answering to this > question is not simple. > > The first patch of the series changes the fwnode_irq_get() so this depends > on the first patch of the series and should not be applied alone. > --- > drivers/iio/cdc/ad7150.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/iio/cdc/ad7150.c b/drivers/iio/cdc/ad7150.c > index 79aeb0aaea67..c05e078bba16 100644 > --- a/drivers/iio/cdc/ad7150.c > +++ b/drivers/iio/cdc/ad7150.c > @@ -541,6 +541,7 @@ static int ad7150_probe(struct i2c_client *client) > const struct i2c_device_id *id = i2c_client_get_device_id(client); > struct ad7150_chip_info *chip; > struct iio_dev *indio_dev; > + bool use_irq = true; > int ret; > > indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); > @@ -561,14 +562,13 @@ static int ad7150_probe(struct i2c_client *client) > > chip->interrupts[0] = fwnode_irq_get(dev_fwnode(&client->dev), 0); > if (chip->interrupts[0] < 0) > - return chip->interrupts[0]; > - if (id->driver_data == AD7150) { > + use_irq = false; > + else if (id->driver_data == AD7150) { > chip->interrupts[1] = fwnode_irq_get(dev_fwnode(&client->dev), 1); > if (chip->interrupts[1] < 0) > - return chip->interrupts[1]; > + use_irq = false; > } > - if (chip->interrupts[0] && > - (id->driver_data == AD7151 || chip->interrupts[1])) { > + if (use_irq) { > irq_set_status_flags(chip->interrupts[0], IRQ_NOAUTOEN); > ret = devm_request_threaded_irq(&client->dev, > chip->interrupts[0],
diff --git a/drivers/iio/cdc/ad7150.c b/drivers/iio/cdc/ad7150.c index 79aeb0aaea67..c05e078bba16 100644 --- a/drivers/iio/cdc/ad7150.c +++ b/drivers/iio/cdc/ad7150.c @@ -541,6 +541,7 @@ static int ad7150_probe(struct i2c_client *client) const struct i2c_device_id *id = i2c_client_get_device_id(client); struct ad7150_chip_info *chip; struct iio_dev *indio_dev; + bool use_irq = true; int ret; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); @@ -561,14 +562,13 @@ static int ad7150_probe(struct i2c_client *client) chip->interrupts[0] = fwnode_irq_get(dev_fwnode(&client->dev), 0); if (chip->interrupts[0] < 0) - return chip->interrupts[0]; - if (id->driver_data == AD7150) { + use_irq = false; + else if (id->driver_data == AD7150) { chip->interrupts[1] = fwnode_irq_get(dev_fwnode(&client->dev), 1); if (chip->interrupts[1] < 0) - return chip->interrupts[1]; + use_irq = false; } - if (chip->interrupts[0] && - (id->driver_data == AD7151 || chip->interrupts[1])) { + if (use_irq) { irq_set_status_flags(chip->interrupts[0], IRQ_NOAUTOEN); ret = devm_request_threaded_irq(&client->dev, chip->interrupts[0],
fwnode_irq_get[_byname]() were changed to not return 0 anymore. The special error case where device-tree based IRQ mapping fails can't no longer be reliably detected from this return value. This yields a functional change in the driver where the mapping failure is treated as an error. The mapping failure can occur for example when the device-tree IRQ information translation call-back(s) (xlate) fail, IRQ domain is not found, IRQ type conflicts, etc. In most cases this indicates an error in the device-tree and special handling is not really required. One more thing to note is that ACPI APIs do not return zero for any failures so this special handling did only apply on device-tree based systems. Drop the special handling for DT mapping failures as these can no longer be separated from other errors at driver side. Change all failures in IRQ getting to be handled by continuing without the events instead of aborting the probe upon certain errors. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> --- Revision history: v5 => v6: - Never abort the probe when IRQ getting fails but continue without events. Please note that I don't have the hardware to test this change. Furthermore, testing this type of device-tree error cases is not trivial, as the question we probably dive in is "what happens with the existing users who have errors in the device-tree". Answering to this question is not simple. The first patch of the series changes the fwnode_irq_get() so this depends on the first patch of the series and should not be applied alone. --- drivers/iio/cdc/ad7150.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)