[v3,0/5] Minor device-tree additions for C.H.I.P

Message

Jonathan McDowell May 16, 2023, 5:46 p.m. UTC

This small patch series adds some improvements for the C.H.I.P DTS,
enabling bluetooth, exporting the PMIC temperature details via iio-hwmon
and finally adding the appropriate base pinmux info for an external MMC
card. As a pre-requisite for the Bluetooth it also adds support to the
AXP209 driver for GPIO3, which is the Bluetooth device wakeup line.

v3:
- Add Reviewed-By/Acked-Bys
- Drop redundant else
- Switch to GENMASK/decimal values for GPIO3 function defs
v2:
- Fix missing ; on bluetooth stanza in DTS
- Add device/host wake GPIOs for Bluetooth device
- Add omit-if-no-ref on the port E pinmux stanza
- Rename axp20x_temp to pmic-temp
- Add AXP209 GPIO3 support

Jonathan McDowell (5):
  dt-bindings: gpio: Add GPIO3 for AXP209 GPIO binding schema
  pinctrl: axp209: Add support for GPIO3 on the AXP209
  ARM: dts: sun5i: chip: Enable bluetooth
  ARM: dts: sun5i: Add port E pinmux settings for mmc2
  ARM: dts: axp209: Add iio-hwmon node for internal temperature

 .../bindings/gpio/x-powers,axp209-gpio.yaml   |  1 +
 arch/arm/boot/dts/axp209.dtsi                 |  7 ++++
 arch/arm/boot/dts/sun5i-r8-chip.dts           |  6 +++
 arch/arm/boot/dts/sun5i.dtsi                  |  9 ++++
 drivers/pinctrl/pinctrl-axp209.c              | 42 +++++++++++++++++++
 5 files changed, 65 insertions(+)

Comments

Jernej Škrabec May 31, 2023, 9:20 p.m. UTC | #1

Dne torek, 16. maj 2023 ob 19:46:55 CEST je Jonathan McDowell napisal(a):
> This small patch series adds some improvements for the C.H.I.P DTS,
> enabling bluetooth, exporting the PMIC temperature details via iio-hwmon
> and finally adding the appropriate base pinmux info for an external MMC
> card. As a pre-requisite for the Bluetooth it also adds support to the
> AXP209 driver for GPIO3, which is the Bluetooth device wakeup line.
> 
> v3:
> - Add Reviewed-By/Acked-Bys
> - Drop redundant else
> - Switch to GENMASK/decimal values for GPIO3 function defs
> v2:
> - Fix missing ; on bluetooth stanza in DTS
> - Add device/host wake GPIOs for Bluetooth device
> - Add omit-if-no-ref on the port E pinmux stanza
> - Rename axp20x_temp to pmic-temp
> - Add AXP209 GPIO3 support
> 
> Jonathan McDowell (5):
>   dt-bindings: gpio: Add GPIO3 for AXP209 GPIO binding schema
>   pinctrl: axp209: Add support for GPIO3 on the AXP209
>   ARM: dts: sun5i: chip: Enable bluetooth
>   ARM: dts: sun5i: Add port E pinmux settings for mmc2
>   ARM: dts: axp209: Add iio-hwmon node for internal temperature

Patches 3-5 applied to sunxi tree. Thanks!

Best regards,
Jernej

> 
>  .../bindings/gpio/x-powers,axp209-gpio.yaml   |  1 +
>  arch/arm/boot/dts/axp209.dtsi                 |  7 ++++
>  arch/arm/boot/dts/sun5i-r8-chip.dts           |  6 +++
>  arch/arm/boot/dts/sun5i.dtsi                  |  9 ++++
>  drivers/pinctrl/pinctrl-axp209.c              | 42 +++++++++++++++++++
>  5 files changed, 65 insertions(+)
> 
>