Message ID | 20230602062016.1883171-1-abel.vesa@linaro.org (mailing list archive) |
---|---|
State | Accepted |
Commit | 97c289026c62f80933b44353904b919572175f61 |
Headers | show |
Series | [v2,1/6] arm64: dts: qcom: sm8150: Use 2 interconnect cells | expand |
On 2.06.2023 08:20, Abel Vesa wrote: > Use two interconnect cells in order to optionally support a path tag. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > > Changes since v1: > * This patch was not part of v1 > > arch/arm64/boot/dts/qcom/sm8150.dtsi | 60 ++++++++++++++-------------- > 1 file changed, 30 insertions(+), 30 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi > index 197c016aaeba..50a21062ea24 100644 > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi > @@ -55,8 +55,8 @@ CPU0: cpu@0 { > next-level-cache = <&L2_0>; > qcom,freq-domain = <&cpufreq_hw 0>; > operating-points-v2 = <&cpu0_opp_table>; > - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, > - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; > + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, > + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; > power-domains = <&CPU_PD0>; > power-domain-names = "psci"; > #cooling-cells = <2>; > @@ -84,8 +84,8 @@ CPU1: cpu@100 { > next-level-cache = <&L2_100>; > qcom,freq-domain = <&cpufreq_hw 0>; > operating-points-v2 = <&cpu0_opp_table>; > - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, > - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; > + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, > + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; > power-domains = <&CPU_PD1>; > power-domain-names = "psci"; > #cooling-cells = <2>; > @@ -108,8 +108,8 @@ CPU2: cpu@200 { > next-level-cache = <&L2_200>; > qcom,freq-domain = <&cpufreq_hw 0>; > operating-points-v2 = <&cpu0_opp_table>; > - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, > - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; > + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, > + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; > power-domains = <&CPU_PD2>; > power-domain-names = "psci"; > #cooling-cells = <2>; > @@ -132,8 +132,8 @@ CPU3: cpu@300 { > next-level-cache = <&L2_300>; > qcom,freq-domain = <&cpufreq_hw 0>; > operating-points-v2 = <&cpu0_opp_table>; > - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, > - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; > + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, > + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; > power-domains = <&CPU_PD3>; > power-domain-names = "psci"; > #cooling-cells = <2>; > @@ -156,8 +156,8 @@ CPU4: cpu@400 { > next-level-cache = <&L2_400>; > qcom,freq-domain = <&cpufreq_hw 1>; > operating-points-v2 = <&cpu4_opp_table>; > - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, > - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; > + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, > + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; > power-domains = <&CPU_PD4>; > power-domain-names = "psci"; > #cooling-cells = <2>; > @@ -180,8 +180,8 @@ CPU5: cpu@500 { > next-level-cache = <&L2_500>; > qcom,freq-domain = <&cpufreq_hw 1>; > operating-points-v2 = <&cpu4_opp_table>; > - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, > - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; > + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, > + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; > power-domains = <&CPU_PD5>; > power-domain-names = "psci"; > #cooling-cells = <2>; > @@ -204,8 +204,8 @@ CPU6: cpu@600 { > next-level-cache = <&L2_600>; > qcom,freq-domain = <&cpufreq_hw 1>; > operating-points-v2 = <&cpu4_opp_table>; > - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, > - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; > + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, > + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; > power-domains = <&CPU_PD6>; > power-domain-names = "psci"; > #cooling-cells = <2>; > @@ -228,8 +228,8 @@ CPU7: cpu@700 { > next-level-cache = <&L2_700>; > qcom,freq-domain = <&cpufreq_hw 2>; > operating-points-v2 = <&cpu7_opp_table>; > - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, > - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; > + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, > + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; > power-domains = <&CPU_PD7>; > power-domain-names = "psci"; > #cooling-cells = <2>; > @@ -1760,49 +1760,49 @@ spi15: spi@c94000 { > config_noc: interconnect@1500000 { > compatible = "qcom,sm8150-config-noc"; > reg = <0 0x01500000 0 0x7400>; > - #interconnect-cells = <1>; > + #interconnect-cells = <2>; > qcom,bcm-voters = <&apps_bcm_voter>; > }; > > system_noc: interconnect@1620000 { > compatible = "qcom,sm8150-system-noc"; > reg = <0 0x01620000 0 0x19400>; > - #interconnect-cells = <1>; > + #interconnect-cells = <2>; > qcom,bcm-voters = <&apps_bcm_voter>; > }; > > mc_virt: interconnect@163a000 { > compatible = "qcom,sm8150-mc-virt"; > reg = <0 0x0163a000 0 0x1000>; > - #interconnect-cells = <1>; > + #interconnect-cells = <2>; > qcom,bcm-voters = <&apps_bcm_voter>; > }; > > aggre1_noc: interconnect@16e0000 { > compatible = "qcom,sm8150-aggre1-noc"; > reg = <0 0x016e0000 0 0xd080>; > - #interconnect-cells = <1>; > + #interconnect-cells = <2>; > qcom,bcm-voters = <&apps_bcm_voter>; > }; > > aggre2_noc: interconnect@1700000 { > compatible = "qcom,sm8150-aggre2-noc"; > reg = <0 0x01700000 0 0x20000>; > - #interconnect-cells = <1>; > + #interconnect-cells = <2>; > qcom,bcm-voters = <&apps_bcm_voter>; > }; > > compute_noc: interconnect@1720000 { > compatible = "qcom,sm8150-compute-noc"; > reg = <0 0x01720000 0 0x7000>; > - #interconnect-cells = <1>; > + #interconnect-cells = <2>; > qcom,bcm-voters = <&apps_bcm_voter>; > }; > > mmss_noc: interconnect@1740000 { > compatible = "qcom,sm8150-mmss-noc"; > reg = <0 0x01740000 0 0x1c100>; > - #interconnect-cells = <1>; > + #interconnect-cells = <2>; > qcom,bcm-voters = <&apps_bcm_voter>; > }; > > @@ -2120,7 +2120,7 @@ crypto: crypto@1dfa000 { > <&apps_smmu 0x506 0x0011>, > <&apps_smmu 0x508 0x0011>, > <&apps_smmu 0x512 0x0000>; > - interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 &mc_virt SLAVE_EBI_CH0>; > + interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>; > interconnect-names = "memory"; > }; > > @@ -3547,14 +3547,14 @@ opp-202000000 { > dc_noc: interconnect@9160000 { > compatible = "qcom,sm8150-dc-noc"; > reg = <0 0x09160000 0 0x3200>; > - #interconnect-cells = <1>; > + #interconnect-cells = <2>; > qcom,bcm-voters = <&apps_bcm_voter>; > }; > > gem_noc: interconnect@9680000 { > compatible = "qcom,sm8150-gem-noc"; > reg = <0 0x09680000 0 0x3e200>; > - #interconnect-cells = <1>; > + #interconnect-cells = <2>; > qcom,bcm-voters = <&apps_bcm_voter>; > }; > > @@ -3659,7 +3659,7 @@ usb_2_dwc3: usb@a800000 { > camnoc_virt: interconnect@ac00000 { > compatible = "qcom,sm8150-camnoc-virt"; > reg = <0 0x0ac00000 0 0x1000>; > - #interconnect-cells = <1>; > + #interconnect-cells = <2>; > qcom,bcm-voters = <&apps_bcm_voter>; > }; > > @@ -3668,8 +3668,8 @@ mdss: display-subsystem@ae00000 { > reg = <0 0x0ae00000 0 0x1000>; > reg-names = "mdss"; > > - interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, > - <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; > + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, > + <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; > interconnect-names = "mdp0-mem", "mdp1-mem"; > > power-domains = <&dispcc MDSS_GDSC>; > @@ -4334,7 +4334,7 @@ osm_l3: interconnect@18321000 { > clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; > clock-names = "xo", "alternate"; > > - #interconnect-cells = <1>; > + #interconnect-cells = <2>; > }; > > cpufreq_hw: cpufreq@18323000 {
On Fri, 2 Jun 2023 09:20:11 +0300, Abel Vesa wrote: > Use two interconnect cells in order to optionally support a path tag. > > Applied, thanks! [1/6] arm64: dts: qcom: sm8150: Use 2 interconnect cells commit: 97c289026c62f80933b44353904b919572175f61 [2/6] arm64: dts: qcom: sm8150: Add missing interconnect paths to USB HCs commit: c2998e9a42637cdab699a21aa75a8cb5a7cbce72 [3/6] arm64: dts: qcom: sm8250: Use 2 interconnect cells commit: b5a12438325b9c0207ae4374a797368070cfb945 [4/6] arm64: dts: qcom: sm8250: Add missing interconnect paths to USB HCs commit: fd62fd1cf9e7fb7ef761e411d37cb5d06769954b [5/6] arm64: dts: qcom: sm8350: Add missing interconnect paths to USB HCs commit: 8b51dc863baf1447e9ab52411c5bed7ef9a56d80 [6/6] arm64: dts: qcom: sm8450: Add missing interconnect paths to USB HC commit: b5b0649d5be4c82d09489492c121a7823323fc4a Best regards,
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 197c016aaeba..50a21062ea24 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -55,8 +55,8 @@ CPU0: cpu@0 { next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -84,8 +84,8 @@ CPU1: cpu@100 { next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD1>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -108,8 +108,8 @@ CPU2: cpu@200 { next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD2>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -132,8 +132,8 @@ CPU3: cpu@300 { next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD3>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -156,8 +156,8 @@ CPU4: cpu@400 { next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD4>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -180,8 +180,8 @@ CPU5: cpu@500 { next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD5>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -204,8 +204,8 @@ CPU6: cpu@600 { next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD6>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -228,8 +228,8 @@ CPU7: cpu@700 { next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; operating-points-v2 = <&cpu7_opp_table>; - interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>; power-domains = <&CPU_PD7>; power-domain-names = "psci"; #cooling-cells = <2>; @@ -1760,49 +1760,49 @@ spi15: spi@c94000 { config_noc: interconnect@1500000 { compatible = "qcom,sm8150-config-noc"; reg = <0 0x01500000 0 0x7400>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; system_noc: interconnect@1620000 { compatible = "qcom,sm8150-system-noc"; reg = <0 0x01620000 0 0x19400>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mc_virt: interconnect@163a000 { compatible = "qcom,sm8150-mc-virt"; reg = <0 0x0163a000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre1_noc: interconnect@16e0000 { compatible = "qcom,sm8150-aggre1-noc"; reg = <0 0x016e0000 0 0xd080>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; aggre2_noc: interconnect@1700000 { compatible = "qcom,sm8150-aggre2-noc"; reg = <0 0x01700000 0 0x20000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; compute_noc: interconnect@1720000 { compatible = "qcom,sm8150-compute-noc"; reg = <0 0x01720000 0 0x7000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; mmss_noc: interconnect@1740000 { compatible = "qcom,sm8150-mmss-noc"; reg = <0 0x01740000 0 0x1c100>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -2120,7 +2120,7 @@ crypto: crypto@1dfa000 { <&apps_smmu 0x506 0x0011>, <&apps_smmu 0x508 0x0011>, <&apps_smmu 0x512 0x0000>; - interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 &mc_virt SLAVE_EBI_CH0>; + interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "memory"; }; @@ -3547,14 +3547,14 @@ opp-202000000 { dc_noc: interconnect@9160000 { compatible = "qcom,sm8150-dc-noc"; reg = <0 0x09160000 0 0x3200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; gem_noc: interconnect@9680000 { compatible = "qcom,sm8150-gem-noc"; reg = <0 0x09680000 0 0x3e200>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -3659,7 +3659,7 @@ usb_2_dwc3: usb@a800000 { camnoc_virt: interconnect@ac00000 { compatible = "qcom,sm8150-camnoc-virt"; reg = <0 0x0ac00000 0 0x1000>; - #interconnect-cells = <1>; + #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; @@ -3668,8 +3668,8 @@ mdss: display-subsystem@ae00000 { reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; - interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>, - <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>; + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "mdp0-mem", "mdp1-mem"; power-domains = <&dispcc MDSS_GDSC>; @@ -4334,7 +4334,7 @@ osm_l3: interconnect@18321000 { clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; - #interconnect-cells = <1>; + #interconnect-cells = <2>; }; cpufreq_hw: cpufreq@18323000 {
Use two interconnect cells in order to optionally support a path tag. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- Changes since v1: * This patch was not part of v1 arch/arm64/boot/dts/qcom/sm8150.dtsi | 60 ++++++++++++++-------------- 1 file changed, 30 insertions(+), 30 deletions(-)