diff mbox series

[1/3] drm/todo: Add atomic modesetting references

Message ID 7cea42cd09540657875a210cd16421125497d690.1685696114.git.geert+renesas@glider.be (mailing list archive)
State New, archived
Headers show
Series drm: Atomic modesetting doc and comment improvements | expand

Commit Message

Geert Uytterhoeven June 2, 2023, 9:11 a.m. UTC
The section about converting existing KMS drivers to atomic modesetting
mentions the existence of a conversion guide, but does not reference it.
While the guide is old and rusty, it still contains useful information,
so add a link to it.  Also link to the LWN.net articles that give an
overview about the atomic mode setting design.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 Documentation/gpu/todo.rst | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

Comments

Javier Martinez Canillas June 2, 2023, 10:39 a.m. UTC | #1
Geert Uytterhoeven <geert+renesas@glider.be> writes:

Hello Geert,

Thanks for your patch.

> The section about converting existing KMS drivers to atomic modesetting
> mentions the existence of a conversion guide, but does not reference it.
> While the guide is old and rusty, it still contains useful information,
> so add a link to it.  Also link to the LWN.net articles that give an
> overview about the atomic mode setting design.
>

This is a great idea and agree that would be very useful to have these.

> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
>  Documentation/gpu/todo.rst | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
> index 68bdafa0284f55f6..51eb67f5268c5ec1 100644
> --- a/Documentation/gpu/todo.rst
> +++ b/Documentation/gpu/todo.rst
> @@ -49,14 +49,19 @@ converted over. Modern compositors like Wayland or Surfaceflinger on Android
>  really want an atomic modeset interface, so this is all about the bright
>  future.
>  
> -There is a conversion guide for atomic and all you need is a GPU for a
> +There is a conversion guide for atomic[1] and all you need is a GPU for a
>  non-converted driver (again virtual HW drivers for KVM are still all
> -suitable).

Are any of the virtual drivers not yet ported to atomic? This sentence
seems to be outdated and maybe you could remove it on a following patch?

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Laurent Pinchart June 2, 2023, 10:53 a.m. UTC | #2
Hi Geert,

Thank you for the patch.

On Fri, Jun 02, 2023 at 11:11:34AM +0200, Geert Uytterhoeven wrote:
> The section about converting existing KMS drivers to atomic modesetting
> mentions the existence of a conversion guide, but does not reference it.
> While the guide is old and rusty, it still contains useful information,
> so add a link to it.  Also link to the LWN.net articles that give an
> overview about the atomic mode setting design.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
>  Documentation/gpu/todo.rst | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
> index 68bdafa0284f55f6..51eb67f5268c5ec1 100644
> --- a/Documentation/gpu/todo.rst
> +++ b/Documentation/gpu/todo.rst
> @@ -49,14 +49,19 @@ converted over. Modern compositors like Wayland or Surfaceflinger on Android
>  really want an atomic modeset interface, so this is all about the bright
>  future.
>  
> -There is a conversion guide for atomic and all you need is a GPU for a
> +There is a conversion guide for atomic[1] and all you need is a GPU for a
>  non-converted driver (again virtual HW drivers for KVM are still all
> -suitable).
> +suitable).  The "Atomic mode setting design overview" series [2][3] at

s/  / /

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

> +LWN.net can also be helpful.
>  
>  As part of this drivers also need to convert to universal plane (which means
>  exposing primary & cursor as proper plane objects). But that's much easier to
>  do by directly using the new atomic helper driver callbacks.
>  
> +  - [1] https://blog.ffwll.ch/2014/11/atomic-modeset-support-for-kms-drivers.html
> +  - [2] https://lwn.net/Articles/653071/
> +  - [3] https://lwn.net/Articles/653466/
> +
>  Contact: Daniel Vetter, respective driver maintainers
>  
>  Level: Advanced
Geert Uytterhoeven June 2, 2023, 11:23 a.m. UTC | #3
Hi Javier,

On Fri, Jun 2, 2023 at 12:39 PM Javier Martinez Canillas
<javierm@redhat.com> wrote:
> Geert Uytterhoeven <geert+renesas@glider.be> writes:
> > The section about converting existing KMS drivers to atomic modesetting
> > mentions the existence of a conversion guide, but does not reference it.
> > While the guide is old and rusty, it still contains useful information,
> > so add a link to it.  Also link to the LWN.net articles that give an
> > overview about the atomic mode setting design.

> > --- a/Documentation/gpu/todo.rst
> > +++ b/Documentation/gpu/todo.rst
> > @@ -49,14 +49,19 @@ converted over. Modern compositors like Wayland or Surfaceflinger on Android
> >  really want an atomic modeset interface, so this is all about the bright
> >  future.
> >
> > -There is a conversion guide for atomic and all you need is a GPU for a
> > +There is a conversion guide for atomic[1] and all you need is a GPU for a
> >  non-converted driver (again virtual HW drivers for KVM are still all
> > -suitable).
>
> Are any of the virtual drivers not yet ported to atomic? This sentence
> seems to be outdated and maybe you could remove it on a following patch?

Good question.  I'm not sure which driver(s) this refers to.
drivers/gpu/drm/vkms/ was introduced much later, and always had
DRIVER_ATOMIC. Perhaps just the boochs driver, which was converted?

> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

Thanks!

Gr{oetje,eeting}s,

                        Geert
Bagas Sanjaya June 2, 2023, 1:32 p.m. UTC | #4
On Fri, Jun 02, 2023 at 11:11:34AM +0200, Geert Uytterhoeven wrote:
> -There is a conversion guide for atomic and all you need is a GPU for a
> +There is a conversion guide for atomic[1] and all you need is a GPU for a
>  non-converted driver (again virtual HW drivers for KVM are still all
> -suitable).
> +suitable).  The "Atomic mode setting design overview" series [2][3] at
> +LWN.net can also be helpful.
>  
>  As part of this drivers also need to convert to universal plane (which means
>  exposing primary & cursor as proper plane objects). But that's much easier to
>  do by directly using the new atomic helper driver callbacks.
>  
> +  - [1] https://blog.ffwll.ch/2014/11/atomic-modeset-support-for-kms-drivers.html
> +  - [2] https://lwn.net/Articles/653071/
> +  - [3] https://lwn.net/Articles/653466/
> +

Looks like footnotes better serve these links above:

---- >8 ----
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index 51eb67f5268c5e..6ea92f48a2e21c 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -49,18 +49,18 @@ converted over. Modern compositors like Wayland or Surfaceflinger on Android
 really want an atomic modeset interface, so this is all about the bright
 future.
 
-There is a conversion guide for atomic[1] and all you need is a GPU for a
+There is a conversion guide for atomic [1]_ and all you need is a GPU for a
 non-converted driver (again virtual HW drivers for KVM are still all
-suitable).  The "Atomic mode setting design overview" series [2][3] at
+suitable).  The "Atomic mode setting design overview" series [2]_ [3]_ at
 LWN.net can also be helpful.
 
 As part of this drivers also need to convert to universal plane (which means
 exposing primary & cursor as proper plane objects). But that's much easier to
 do by directly using the new atomic helper driver callbacks.
 
-  - [1] https://blog.ffwll.ch/2014/11/atomic-modeset-support-for-kms-drivers.html
-  - [2] https://lwn.net/Articles/653071/
-  - [3] https://lwn.net/Articles/653466/
+  .. [1] https://blog.ffwll.ch/2014/11/atomic-modeset-support-for-kms-drivers.html
+  .. [2] https://lwn.net/Articles/653071/
+  .. [3] https://lwn.net/Articles/653466/
 
 Contact: Daniel Vetter, respective driver maintainers
 
Thanks.
diff mbox series

Patch

diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index 68bdafa0284f55f6..51eb67f5268c5ec1 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -49,14 +49,19 @@  converted over. Modern compositors like Wayland or Surfaceflinger on Android
 really want an atomic modeset interface, so this is all about the bright
 future.
 
-There is a conversion guide for atomic and all you need is a GPU for a
+There is a conversion guide for atomic[1] and all you need is a GPU for a
 non-converted driver (again virtual HW drivers for KVM are still all
-suitable).
+suitable).  The "Atomic mode setting design overview" series [2][3] at
+LWN.net can also be helpful.
 
 As part of this drivers also need to convert to universal plane (which means
 exposing primary & cursor as proper plane objects). But that's much easier to
 do by directly using the new atomic helper driver callbacks.
 
+  - [1] https://blog.ffwll.ch/2014/11/atomic-modeset-support-for-kms-drivers.html
+  - [2] https://lwn.net/Articles/653071/
+  - [3] https://lwn.net/Articles/653466/
+
 Contact: Daniel Vetter, respective driver maintainers
 
 Level: Advanced