| Message ID | 20230521222852.5740-12-quic_mmanikan@quicinc.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Add multipd remoteproc support | expand |
On 22/05/2023 00:28, Manikanta Mylavarapu wrote: > Enable nodes required for multipd remoteproc bring up Please use subject prefixes matching the subsystem. You can get them for example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory your patch is touching. It is "dts". Not "dtsi". > > Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> > --- > Changes in V2: > - Corrected syntax like alignmnet and kept nodes in sorted order. > - Covered entire TCSR region. > - Added 'firmware-name' property. > > arch/arm64/boot/dts/qcom/ipq5018.dtsi | 140 ++++++++++++++++++++++++++ > 1 file changed, 140 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi > index 9f13d2dcdfd5..3772d54d89e4 100644 > --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi > @@ -85,6 +85,18 @@ > reg = <0x0 0x4ac00000 0x0 0x200000>; > no-map; > }; > + > + q6_region: wcnss@4b000000 { > + reg = <0x0 0x4b000000 0x0 0x1700000>; > + no-map; > + }; > + > + smem@4ab00000 { > + compatible = "qcom,smem"; > + reg = <0x0 0x4ab00000 0x0 0x100000>; > + hwlocks = <&tcsr_mutex 0>; > + no-map; > + }; > }; > > soc: soc@0 { > @@ -128,6 +140,12 @@ > #power-domain-cells = <1>; > }; > > + tcsr_mutex: hwlock@1905000 { > + compatible = "qcom,tcsr-mutex"; > + reg = <0x01905000 0x20000>; > + #hwlock-cells = <1>; > + }; > + > sdhc_1: mmc@7804000 { > compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5"; > reg = <0x7804000 0x1000>; > @@ -181,6 +199,14 @@ > }; > }; > > + apcs_glb: mailbox@b111000 { > + compatible = "qcom,ipq5018-apcs-apps-global", > + "qcom,ipq6018-apcs-apps-global"; > + reg = <0x0b111000 0x1000>; > + #clock-cells = <1>; > + #mbox-cells = <1>; > + }; > + > timer@b120000 { > compatible = "arm,armv7-timer-mem"; > reg = <0x0b120000 0x1000>; > @@ -238,6 +264,96 @@ > status = "disabled"; > }; > }; > + > + q6v5_wcss: remoteproc@cd00000 { > + compatible = "qcom,ipq5018-q6-mpd"; > + reg = <0x0cd00000 0x4040>; > + firmware-name = "IPQ5018/q6_fw.mdt", > + "IPQ5018/m3_fw.mdt", > + "qcn6122/m3_fw.mdt"; > + interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>, > + <&wcss_smp2p_in 0 0>, > + <&wcss_smp2p_in 1 0>, > + <&wcss_smp2p_in 2 0>, > + <&wcss_smp2p_in 3 0>; > + interrupt-names = "wdog", > + "fatal", > + "ready", > + "handover", > + "stop-ack"; > + > + qcom,smem-states = <&wcss_smp2p_out 0>, > + <&wcss_smp2p_out 1>; > + qcom,smem-state-names = "shutdown", > + "stop"; > + memory-region = <&q6_region>; > + > + glink-edge { > + interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; > + label = "rtr"; > + qcom,remote-pid = <1>; > + mboxes = <&apcs_glb 8>; > + }; > + > + pd-1 { > + compatible = "qcom,ipq5018-wcss-ahb-mpd"; > + firmware-name = "IPQ5018/q6_fw.mdt"; > + interrupts-extended = <&wcss_smp2p_in 8 0>, > + <&wcss_smp2p_in 9 0>, > + <&wcss_smp2p_in 12 0>, > + <&wcss_smp2p_in 11 0>; What "0" stands for? > + interrupt-names = "fatal", > + "ready", Best regards, Krzysztof
On 5/30/2023 4:35 PM, Krzysztof Kozlowski wrote: > On 22/05/2023 00:28, Manikanta Mylavarapu wrote: >> Enable nodes required for multipd remoteproc bring up > > Please use subject prefixes matching the subsystem. You can get them for > example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory > your patch is touching. > > It is "dts". Not "dtsi". > Sure, I will update to 'dtsi'. >> >> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> >> --- >> Changes in V2: >> - Corrected syntax like alignmnet and kept nodes in sorted order. >> - Covered entire TCSR region. >> - Added 'firmware-name' property. >> >> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 140 ++++++++++++++++++++++++++ >> 1 file changed, 140 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> index 9f13d2dcdfd5..3772d54d89e4 100644 >> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> @@ -85,6 +85,18 @@ >> reg = <0x0 0x4ac00000 0x0 0x200000>; >> no-map; >> }; >> + >> + q6_region: wcnss@4b000000 { >> + reg = <0x0 0x4b000000 0x0 0x1700000>; >> + no-map; >> + }; >> + >> + smem@4ab00000 { >> + compatible = "qcom,smem"; >> + reg = <0x0 0x4ab00000 0x0 0x100000>; >> + hwlocks = <&tcsr_mutex 0>; >> + no-map; >> + }; >> }; >> >> soc: soc@0 { >> @@ -128,6 +140,12 @@ >> #power-domain-cells = <1>; >> }; >> >> + tcsr_mutex: hwlock@1905000 { >> + compatible = "qcom,tcsr-mutex"; >> + reg = <0x01905000 0x20000>; >> + #hwlock-cells = <1>; >> + }; >> + >> sdhc_1: mmc@7804000 { >> compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5"; >> reg = <0x7804000 0x1000>; >> @@ -181,6 +199,14 @@ >> }; >> }; >> >> + apcs_glb: mailbox@b111000 { >> + compatible = "qcom,ipq5018-apcs-apps-global", >> + "qcom,ipq6018-apcs-apps-global"; >> + reg = <0x0b111000 0x1000>; >> + #clock-cells = <1>; >> + #mbox-cells = <1>; >> + }; >> + >> timer@b120000 { >> compatible = "arm,armv7-timer-mem"; >> reg = <0x0b120000 0x1000>; >> @@ -238,6 +264,96 @@ >> status = "disabled"; >> }; >> }; >> + >> + q6v5_wcss: remoteproc@cd00000 { >> + compatible = "qcom,ipq5018-q6-mpd"; >> + reg = <0x0cd00000 0x4040>; >> + firmware-name = "IPQ5018/q6_fw.mdt", >> + "IPQ5018/m3_fw.mdt", >> + "qcn6122/m3_fw.mdt"; >> + interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>, >> + <&wcss_smp2p_in 0 0>, >> + <&wcss_smp2p_in 1 0>, >> + <&wcss_smp2p_in 2 0>, >> + <&wcss_smp2p_in 3 0>; >> + interrupt-names = "wdog", >> + "fatal", >> + "ready", >> + "handover", >> + "stop-ack"; >> + >> + qcom,smem-states = <&wcss_smp2p_out 0>, >> + <&wcss_smp2p_out 1>; >> + qcom,smem-state-names = "shutdown", >> + "stop"; >> + memory-region = <&q6_region>; >> + >> + glink-edge { >> + interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; >> + label = "rtr"; >> + qcom,remote-pid = <1>; >> + mboxes = <&apcs_glb 8>; >> + }; >> + >> + pd-1 { >> + compatible = "qcom,ipq5018-wcss-ahb-mpd"; >> + firmware-name = "IPQ5018/q6_fw.mdt"; >> + interrupts-extended = <&wcss_smp2p_in 8 0>, >> + <&wcss_smp2p_in 9 0>, >> + <&wcss_smp2p_in 12 0>, >> + <&wcss_smp2p_in 11 0>; > > What "0" stands for? > 0 means IRQ_NONE. These are software interrupts (register write), so we have configured to 0. I will replace 0 with IRQ_NONE. Thanks & Regards, Manikanta. >> + interrupt-names = "fatal", >> + "ready", > Best regards, > Krzysztof >
On 6/5/2023 11:05 AM, Manikanta Mylavarapu wrote: > > > On 5/30/2023 4:35 PM, Krzysztof Kozlowski wrote: >> On 22/05/2023 00:28, Manikanta Mylavarapu wrote: >>> Enable nodes required for multipd remoteproc bring up >> >> Please use subject prefixes matching the subsystem. You can get them for >> example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory >> your patch is touching. >> >> It is "dts". Not "dtsi". >> > Sure, I will update to 'dtsi'. > Sorry please discard my previous reply. I will update to dts. >>> >>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> >>> --- >>> Changes in V2: >>> - Corrected syntax like alignmnet and kept nodes in sorted order. >>> - Covered entire TCSR region. >>> - Added 'firmware-name' property. >>> >>> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 140 ++++++++++++++++++++++++++ >>> 1 file changed, 140 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi >>> b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >>> index 9f13d2dcdfd5..3772d54d89e4 100644 >>> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi >>> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >>> @@ -85,6 +85,18 @@ >>> reg = <0x0 0x4ac00000 0x0 0x200000>; >>> no-map; >>> }; >>> + >>> + q6_region: wcnss@4b000000 { >>> + reg = <0x0 0x4b000000 0x0 0x1700000>; >>> + no-map; >>> + }; >>> + >>> + smem@4ab00000 { >>> + compatible = "qcom,smem"; >>> + reg = <0x0 0x4ab00000 0x0 0x100000>; >>> + hwlocks = <&tcsr_mutex 0>; >>> + no-map; >>> + }; >>> }; >>> >>> soc: soc@0 { >>> @@ -128,6 +140,12 @@ >>> #power-domain-cells = <1>; >>> }; >>> >>> + tcsr_mutex: hwlock@1905000 { >>> + compatible = "qcom,tcsr-mutex"; >>> + reg = <0x01905000 0x20000>; >>> + #hwlock-cells = <1>; >>> + }; >>> + >>> sdhc_1: mmc@7804000 { >>> compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5"; >>> reg = <0x7804000 0x1000>; >>> @@ -181,6 +199,14 @@ >>> }; >>> }; >>> >>> + apcs_glb: mailbox@b111000 { >>> + compatible = "qcom,ipq5018-apcs-apps-global", >>> + "qcom,ipq6018-apcs-apps-global"; >>> + reg = <0x0b111000 0x1000>; >>> + #clock-cells = <1>; >>> + #mbox-cells = <1>; >>> + }; >>> + >>> timer@b120000 { >>> compatible = "arm,armv7-timer-mem"; >>> reg = <0x0b120000 0x1000>; >>> @@ -238,6 +264,96 @@ >>> status = "disabled"; >>> }; >>> }; >>> + >>> + q6v5_wcss: remoteproc@cd00000 { >>> + compatible = "qcom,ipq5018-q6-mpd"; >>> + reg = <0x0cd00000 0x4040>; >>> + firmware-name = "IPQ5018/q6_fw.mdt", >>> + "IPQ5018/m3_fw.mdt", >>> + "qcn6122/m3_fw.mdt"; >>> + interrupts-extended = <&intc GIC_SPI 291 >>> IRQ_TYPE_EDGE_RISING>, >>> + <&wcss_smp2p_in 0 0>, >>> + <&wcss_smp2p_in 1 0>, >>> + <&wcss_smp2p_in 2 0>, >>> + <&wcss_smp2p_in 3 0>; >>> + interrupt-names = "wdog", >>> + "fatal", >>> + "ready", >>> + "handover", >>> + "stop-ack"; >>> + >>> + qcom,smem-states = <&wcss_smp2p_out 0>, >>> + <&wcss_smp2p_out 1>; >>> + qcom,smem-state-names = "shutdown", >>> + "stop"; >>> + memory-region = <&q6_region>; >>> + >>> + glink-edge { >>> + interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; >>> + label = "rtr"; >>> + qcom,remote-pid = <1>; >>> + mboxes = <&apcs_glb 8>; >>> + }; >>> + >>> + pd-1 { >>> + compatible = "qcom,ipq5018-wcss-ahb-mpd"; >>> + firmware-name = "IPQ5018/q6_fw.mdt"; >>> + interrupts-extended = <&wcss_smp2p_in 8 0>, >>> + <&wcss_smp2p_in 9 0>, >>> + <&wcss_smp2p_in 12 0>, >>> + <&wcss_smp2p_in 11 0>; >> >> What "0" stands for? >> > 0 means IRQ_NONE. These are software interrupts (register write), > so we have configured to 0. I will replace 0 with IRQ_NONE. > > Thanks & Regards, > Manikanta. > >>> + interrupt-names = "fatal", >>> + "ready", >> Best regards, >> Krzysztof >>
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index 9f13d2dcdfd5..3772d54d89e4 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -85,6 +85,18 @@ reg = <0x0 0x4ac00000 0x0 0x200000>; no-map; }; + + q6_region: wcnss@4b000000 { + reg = <0x0 0x4b000000 0x0 0x1700000>; + no-map; + }; + + smem@4ab00000 { + compatible = "qcom,smem"; + reg = <0x0 0x4ab00000 0x0 0x100000>; + hwlocks = <&tcsr_mutex 0>; + no-map; + }; }; soc: soc@0 { @@ -128,6 +140,12 @@ #power-domain-cells = <1>; }; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + sdhc_1: mmc@7804000 { compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5"; reg = <0x7804000 0x1000>; @@ -181,6 +199,14 @@ }; }; + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq5018-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + #clock-cells = <1>; + #mbox-cells = <1>; + }; + timer@b120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0b120000 0x1000>; @@ -238,6 +264,96 @@ status = "disabled"; }; }; + + q6v5_wcss: remoteproc@cd00000 { + compatible = "qcom,ipq5018-q6-mpd"; + reg = <0x0cd00000 0x4040>; + firmware-name = "IPQ5018/q6_fw.mdt", + "IPQ5018/m3_fw.mdt", + "qcn6122/m3_fw.mdt"; + interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 0 0>, + <&wcss_smp2p_in 1 0>, + <&wcss_smp2p_in 2 0>, + <&wcss_smp2p_in 3 0>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + qcom,smem-states = <&wcss_smp2p_out 0>, + <&wcss_smp2p_out 1>; + qcom,smem-state-names = "shutdown", + "stop"; + memory-region = <&q6_region>; + + glink-edge { + interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; + label = "rtr"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 8>; + }; + + pd-1 { + compatible = "qcom,ipq5018-wcss-ahb-mpd"; + firmware-name = "IPQ5018/q6_fw.mdt"; + interrupts-extended = <&wcss_smp2p_in 8 0>, + <&wcss_smp2p_in 9 0>, + <&wcss_smp2p_in 12 0>, + <&wcss_smp2p_in 11 0>; + interrupt-names = "fatal", + "ready", + "spawn-ack", + "stop-ack"; + qcom,smem-states = <&wcss_smp2p_out 8>, + <&wcss_smp2p_out 9>, + <&wcss_smp2p_out 10>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + }; + + pd-2 { + compatible = "qcom,ipq5018-wcss-pcie-mpd"; + interrupts-extended = <&wcss_smp2p_in 16 0>, + <&wcss_smp2p_in 17 0>, + <&wcss_smp2p_in 20 0>, + <&wcss_smp2p_in 19 0>; + interrupt-names = "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + qcom,smem-states = <&wcss_smp2p_out 16>, + <&wcss_smp2p_out 17>, + <&wcss_smp2p_out 18>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + status = "disabled"; + }; + + pd-3 { + compatible = "qcom,ipq5018-wcss-pcie-mpd"; + interrupts-extended = <&wcss_smp2p_in 24 0>, + <&wcss_smp2p_in 25 0>, + <&wcss_smp2p_in 28 0>, + <&wcss_smp2p_in 27 0>; + interrupt-names = "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + qcom,smem-states = <&wcss_smp2p_out 24>, + <&wcss_smp2p_out 25>, + <&wcss_smp2p_out 26>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + status = "disabled"; + }; + }; }; timer { @@ -247,4 +363,28 @@ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + + wcss: wcss-smp2p { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 9>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + wcss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + wcss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; };
Enable nodes required for multipd remoteproc bring up Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> --- Changes in V2: - Corrected syntax like alignmnet and kept nodes in sorted order. - Covered entire TCSR region. - Added 'firmware-name' property. arch/arm64/boot/dts/qcom/ipq5018.dtsi | 140 ++++++++++++++++++++++++++ 1 file changed, 140 insertions(+) -- 2.17.1