Message ID | 20230523124354.24294-1-mike.looijmans@topic.nl (mailing list archive) |
---|---|
State | Deferred |
Headers | show |
Series | [1/2] dt-bindings: iio: adc: Add microchip MCP3561/2/4R devices | expand |
On Tue, May 23, 2023 at 02:43:53PM +0200, Mike Looijmans wrote: > The MCP3564R is a 24-bit ADC with 8 multiplexed inputs. The MCP3561R is > the same device with 2 inputs, the MCP3562R has 4 inputs. The device > contains one ADC and a multiplexer to select the inputs to the ADC. My favourite - nothing for a while & then two come along almost at once! https://lore.kernel.org/all/20230519160145.44208-2-marius.cristea@microchip.com/ Would you mind, since he seems to have sent it first, reviewing his series? Cheers, Conor. > > Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> > > --- > > .../bindings/iio/adc/microchip,mcp356xr.yaml | 84 +++++++++++++++++++ > 1 file changed, 84 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml > > diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml > new file mode 100644 > index 000000000000..4aef166894c8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml > @@ -0,0 +1,84 @@ > +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause > +# Copyright 2023 Topic Embedded Systems > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/adc/microchip,mcp356xr.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Microchip MCP3561R/MCP3562R/MCP3564R ADC > + > +maintainers: > + - Mike Looijmans <mike.looijmans@topic.nl> > + > +description: | > + Bindings for the Microchip MCP356xR 8-channel ADC devices. Datasheet and info > + can be found at: https://www.microchip.com/en-us/product/MCP3564R > + > +properties: > + compatible: > + enum: > + - microchip,mcp3561r > + - microchip,mcp3562r > + - microchip,mcp3564r > + > + reg: > + maxItems: 1 > + > + spi-max-frequency: > + maximum: 20000000 > + > + clocks: > + description: > + Phandle and clock identifier for external sampling clock. > + If not specified, the internal crystal oscillator will be used. > + maxItems: 1 > + > + interrupts: > + description: IRQ line of the ADC > + maxItems: 1 > + > + drive-open-drain: > + description: > + Whether to drive the IRQ signal as push-pull (default) or open-drain. Note > + that the device requires this pin to become "high", otherwise it will stop > + converting. > + type: boolean > + > + microchip,device-addr: > + description: Device address when multiple chips are present on the same bus. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 1, 2, 3] > + default: 1 > + > + vref-supply: > + description: > + Phandle to the external reference voltage supply. > + If not specified, the internal voltage reference (2.4V) will be used. > + > +required: > + - compatible > + - reg > + - interrupts > + > +allOf: > + - $ref: /schemas/spi/spi-peripheral-props.yaml# > + > +unevaluatedProperties: false > + > +examples: > + - | > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + adc@0 { > + compatible = "microchip,mcp3564r"; > + reg = <0>; > + interrupt-parent = <&gpio5>; > + interrupts = <15 2>; > + spi-max-frequency = <20000000>; > + microchip,device-addr = <1>; > + vref-supply = <&vref_reg>; > + clocks = <&xtal>; > + }; > + }; > -- > 2.17.1 > > > Met vriendelijke groet / kind regards, > > Mike Looijmans > System Expert > > > TOPIC Embedded Products B.V. > Materiaalweg 4, 5681 RJ Best > The Netherlands > > T: +31 (0) 499 33 69 69 > E: mike.looijmans@topicproducts.com > W: www.topic.nl > > Please consider the environment before printing this e-mail
On 23-05-2023 18:00, Conor Dooley wrote: > On Tue, May 23, 2023 at 02:43:53PM +0200, Mike Looijmans wrote: >> The MCP3564R is a 24-bit ADC with 8 multiplexed inputs. The MCP3561R is >> the same device with 2 inputs, the MCP3562R has 4 inputs. The device >> contains one ADC and a multiplexer to select the inputs to the ADC. > > My favourite - nothing for a while & then two come along almost at once! > https://lore.kernel.org/all/20230519160145.44208-2-marius.cristea@microchip.com/ > > Would you mind, since he seems to have sent it first, reviewing his > series? > Oh, damn. Want to, just have to figure out how I can reply to mails that I never got (had delivery turned off for linux-iio). Tips welcome (just send to me personally...) I see lots of similarities, but also some differences. The main being that I aimed at being able to add buffer support (continuous sampling, IRQ driven). Also spotted a minor bug in Marius' driver, so yeah, I definitely want to comment... > Cheers, > Conor. > >> >> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> >> >> --- >> >> .../bindings/iio/adc/microchip,mcp356xr.yaml | 84 +++++++++++++++++++ >> 1 file changed, 84 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml >> >> diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml >> new file mode 100644 >> index 000000000000..4aef166894c8 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml >> @@ -0,0 +1,84 @@ >> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause >> +# Copyright 2023 Topic Embedded Systems >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/iio/adc/microchip,mcp356xr.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Microchip MCP3561R/MCP3562R/MCP3564R ADC >> + >> +maintainers: >> + - Mike Looijmans <mike.looijmans@topic.nl> >> + >> +description: | >> + Bindings for the Microchip MCP356xR 8-channel ADC devices. Datasheet and info >> + can be found at: https://www.microchip.com/en-us/product/MCP3564R >> + >> +properties: >> + compatible: >> + enum: >> + - microchip,mcp3561r >> + - microchip,mcp3562r >> + - microchip,mcp3564r >> + >> + reg: >> + maxItems: 1 >> + >> + spi-max-frequency: >> + maximum: 20000000 >> + >> + clocks: >> + description: >> + Phandle and clock identifier for external sampling clock. >> + If not specified, the internal crystal oscillator will be used. >> + maxItems: 1 >> + >> + interrupts: >> + description: IRQ line of the ADC >> + maxItems: 1 >> + >> + drive-open-drain: >> + description: >> + Whether to drive the IRQ signal as push-pull (default) or open-drain. Note >> + that the device requires this pin to become "high", otherwise it will stop >> + converting. >> + type: boolean >> + >> + microchip,device-addr: >> + description: Device address when multiple chips are present on the same bus. >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + enum: [0, 1, 2, 3] >> + default: 1 >> + >> + vref-supply: >> + description: >> + Phandle to the external reference voltage supply. >> + If not specified, the internal voltage reference (2.4V) will be used. >> + >> +required: >> + - compatible >> + - reg >> + - interrupts >> + >> +allOf: >> + - $ref: /schemas/spi/spi-peripheral-props.yaml# >> + >> +unevaluatedProperties: false >> + >> +examples: >> + - | >> + spi { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + adc@0 { >> + compatible = "microchip,mcp3564r"; >> + reg = <0>; >> + interrupt-parent = <&gpio5>; >> + interrupts = <15 2>; >> + spi-max-frequency = <20000000>; >> + microchip,device-addr = <1>; >> + vref-supply = <&vref_reg>; >> + clocks = <&xtal>; >> + }; >> + }; >> -- >> 2.17.1 >> -- Mike Looijmans System Expert TOPIC Embedded Products B.V. Materiaalweg 4, 5681 RJ Best The Netherlands T: +31 (0) 499 33 69 69 E: mike.looijmans@topic.nl W: www.topic.nl
On Wed, May 24, 2023 at 11:02:39AM +0200, Mike Looijmans wrote: > On 23-05-2023 18:00, Conor Dooley wrote: > > On Tue, May 23, 2023 at 02:43:53PM +0200, Mike Looijmans wrote: > > > The MCP3564R is a 24-bit ADC with 8 multiplexed inputs. The MCP3561R is > > > the same device with 2 inputs, the MCP3562R has 4 inputs. The device > > > contains one ADC and a multiplexer to select the inputs to the ADC. > > > > My favourite - nothing for a while & then two come along almost at once! > > https://lore.kernel.org/all/20230519160145.44208-2-marius.cristea@microchip.com/ > > > > Would you mind, since he seems to have sent it first, reviewing his > > series? > > > > Oh, damn. Want to, just have to figure out how I can reply to mails that I > never got (had delivery turned off for linux-iio). Tips welcome (just send > to me personally...) b4 is The Way. Assuming you have mutt setup to reply, just pass a msgid or lore url to this script: #!/bin/sh -e if [ -z $1 ]; then echo "Usage: $0 [b4 mbox options] <messageId>" exit 1 fi msgid=$1 tmpfile=$(mktemp) b4 mbox -o - "$*" > $tmpfile mutt -f $tmpfile rm $tmpfile
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml new file mode 100644 index 000000000000..4aef166894c8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +# Copyright 2023 Topic Embedded Systems +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,mcp356xr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP3561R/MCP3562R/MCP3564R ADC + +maintainers: + - Mike Looijmans <mike.looijmans@topic.nl> + +description: | + Bindings for the Microchip MCP356xR 8-channel ADC devices. Datasheet and info + can be found at: https://www.microchip.com/en-us/product/MCP3564R + +properties: + compatible: + enum: + - microchip,mcp3561r + - microchip,mcp3562r + - microchip,mcp3564r + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 20000000 + + clocks: + description: + Phandle and clock identifier for external sampling clock. + If not specified, the internal crystal oscillator will be used. + maxItems: 1 + + interrupts: + description: IRQ line of the ADC + maxItems: 1 + + drive-open-drain: + description: + Whether to drive the IRQ signal as push-pull (default) or open-drain. Note + that the device requires this pin to become "high", otherwise it will stop + converting. + type: boolean + + microchip,device-addr: + description: Device address when multiple chips are present on the same bus. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 1 + + vref-supply: + description: + Phandle to the external reference voltage supply. + If not specified, the internal voltage reference (2.4V) will be used. + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "microchip,mcp3564r"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <15 2>; + spi-max-frequency = <20000000>; + microchip,device-addr = <1>; + vref-supply = <&vref_reg>; + clocks = <&xtal>; + }; + };
The MCP3564R is a 24-bit ADC with 8 multiplexed inputs. The MCP3561R is the same device with 2 inputs, the MCP3562R has 4 inputs. The device contains one ADC and a multiplexer to select the inputs to the ADC. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> --- .../bindings/iio/adc/microchip,mcp356xr.yaml | 84 +++++++++++++++++++ 1 file changed, 84 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml