| Message ID | 20230602142426.438375-6-biju.das.jz@bp.renesas.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | Add Renesas PMIC RAA215300 and built-in RTC support | expand |
Hi Alexandre Belloni, Is it ok, if I send isl1208 driver enhancement patches patch#5 to patch#10, as it has no dependencies? Patch#11 will send later based on the discussion [1] [1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20230602142426.438375-2-biju.das.jz@bp.renesas.com/ Cheers, Biju > -----Original Message----- > From: Biju Das <biju.das.jz@bp.renesas.com> > Sent: Friday, June 2, 2023 3:24 PM > To: Alessandro Zummo <a.zummo@towertech.it>; Alexandre Belloni > <alexandre.belloni@bootlin.com>; Rob Herring <robh+dt@kernel.org>; > Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>; Conor Dooley > <conor+dt@kernel.org> > Cc: Biju Das <biju.das.jz@bp.renesas.com>; Trent Piepho > <tpiepho@gmail.com>; linux-rtc@vger.kernel.org; > devicetree@vger.kernel.org; Geert Uytterhoeven <geert+renesas@glider.be>; > Fabrizio Castro <fabrizio.castro.jz@renesas.com>; linux-renesas- > soc@vger.kernel.org; Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Subject: [PATCH v6 05/11] dt-bindings: rtc: isl1208: Convert to json- > schema > > Convert the isl1208 RTC device tree binding documentation to json-schema. > > Update the example to match reality. > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > v5->v6: > * No change > v4_new->v5: > * No change. > v4->v4_new: > * Moved this patch to PMIC series > * Added minItems to interrupt-names. > * Added interrupt-names in conditional schema check. > v3->v4: > * Added Rb tag from Krzysztof Kozlowski. > * Dropped | from description > * Replaced the pin name #EVDET->EVDET in description. > * Dropped oneOf from compatible. > v2->v3: > * Updated interrupt-names property by keeping the list of names. > * Removed Interrupts from required property as it may not be wired. > * Removed isil,ev-evienb from required property. > RFC->v2: > * Updated maintainers list > * Updated description from original bindings > * removed default from isil,ev-evienb properties to match with the > original > bindings. > * Added conditional check for interrupts. > --- > .../devicetree/bindings/rtc/isil,isl1208.txt | 38 -------- > .../devicetree/bindings/rtc/isil,isl1208.yaml | 89 +++++++++++++++++++ > 2 files changed, 89 insertions(+), 38 deletions(-) delete mode 100644 > Documentation/devicetree/bindings/rtc/isil,isl1208.txt > create mode 100644 > Documentation/devicetree/bindings/rtc/isil,isl1208.yaml > > diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt > b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt > deleted file mode 100644 > index 51f003006f04..000000000000 > --- a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt > +++ /dev/null > @@ -1,38 +0,0 @@ > -Intersil ISL1209/19 I2C RTC/Alarm chip with event in > - > -ISL12X9 have additional pins EVIN and #EVDET for tamper detection, while > the > -ISL1208 and ISL1218 do not. They are all use the same driver with the > bindings -described here, with chip specific properties as noted. > - > -Required properties supported by the device: > - - "compatible": Should be one of the following: > - - "isil,isl1208" > - - "isil,isl1209" > - - "isil,isl1218" > - - "isil,isl1219" > - - "reg": I2C bus address of the device > - > -Optional properties: > - - "interrupt-names": list which may contains "irq" and "evdet" > - evdet applies to isl1209 and isl1219 only > - - "interrupts": list of interrupts for "irq" and "evdet" > - evdet applies to isl1209 and isl1219 only > - - "isil,ev-evienb": Enable or disable internal pull on EVIN pin > - Applies to isl1209 and isl1219 only > - Possible values are 0 and 1 > - Value 0 enables internal pull-up on evin pin, 1 disables it. > - Default will leave the non-volatile configuration of the pullup > - as is. > - > -Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 and > #EVDET pin -connected to SoC gpio2 pin 24 and internal pull-up enabled in > EVIN pin. > - > - isl1219: rtc@68 { > - compatible = "isil,isl1219"; > - reg = <0x68>; > - interrupt-names = "irq", "evdet"; > - interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>, > - <&gpio2 24 IRQ_TYPE_EDGE_FALLING>; > - isil,ev-evienb = <1>; > - }; > - > diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml > b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml > new file mode 100644 > index 000000000000..565965147ce6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml > @@ -0,0 +1,89 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 > +--- > +$id: > +https://jpn01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevice > +tree.org%2Fschemas%2Frtc%2Fisil%2Cisl1208.yaml%23&data=05%7C01%7Cbiju.d > +as.jz%40bp.renesas.com%7C6425b765422a4c478a9b08db63752444%7C53d82571da1 > +947e49cb4625a166a4a2a%7C0%7C0%7C638213126986073790%7CUnknown%7CTWFpbGZs > +b3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D% > +7C3000%7C%7C%7C&sdata=MWVlU9PbKqZwsoKfLM595a%2BM8kNNScTer6VApvxwlPY%3D& > +reserved=0 > +$schema: > +https://jpn01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevice > +tree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C01%7Cbiju.das.jz%40bp. > +renesas.com%7C6425b765422a4c478a9b08db63752444%7C53d82571da1947e49cb462 > +5a166a4a2a%7C0%7C0%7C638213126986073790%7CUnknown%7CTWFpbGZsb3d8eyJWIjo > +iMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7 > +C%7C&sdata=xq1qpnrXLjjAr06kMBWUSRqJcY5leluI3JR%2BPZ%2FoU%2F8%3D&reserve > +d=0 > + > +title: Intersil ISL1209/19 I2C RTC/Alarm chip with event in > + > +maintainers: > + - Biju Das <biju.das.jz@bp.renesas.com> > + - Trent Piepho <tpiepho@gmail.com> > + > +description: > + ISL12X9 have additional pins EVIN and EVDET for tamper detection, > +while the > + ISL1208 and ISL1218 do not. > + > +properties: > + compatible: > + enum: > + - isil,isl1208 > + - isil,isl1209 > + - isil,isl1218 > + - isil,isl1219 > + > + reg: > + maxItems: 1 > + > + interrupts: > + minItems: 1 > + maxItems: 2 > + > + interrupt-names: > + minItems: 1 > + items: > + - const: irq > + - const: evdet > + > + isil,ev-evienb: > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [ 0, 1 ] > + description: | > + Enable or disable internal pull on EVIN pin > + Default will leave the non-volatile configuration of the pullup > + as is. > + <0> : Enables internal pull-up on evin pin > + <1> : Disables internal pull-up on evin pin > + > +required: > + - compatible > + - reg > + > +allOf: > + - $ref: rtc.yaml# > + - if: > + properties: > + compatible: > + contains: > + enum: > + - isil,isl1209 > + - isil,isl1219 > + then: > + properties: > + interrupts: > + maxItems: 2 > + interrupt-names: > + items: > + - const: irq > + - const: evdet > + else: > + properties: > + interrupts: > + maxItems: 1 > + interrupt-names: > + items: > + - const: irq > + > +unevaluatedProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + rtc_twi: rtc@6f { > + compatible = "isil,isl1208"; > + reg = <0x6f>; > + }; > + }; > -- > 2.25.1
On Fri, Jun 2, 2023 at 7:24 AM Biju Das <biju.das.jz@bp.renesas.com> wrote: > > Convert the isl1208 RTC device tree binding documentation to json-schema. > > Update the example to match reality. I still don't know why you say this and changed the example to be as simple as possible. Did you test it and does it not work with the actual driver? I looked at the code for parsing OF interrupts and it does not look like anything has changed to make it not work. Nor do I see anything incorrect in the original example. Can you explain what you think is wrong with the original example? > + > + rtc_twi: rtc@6f { > + compatible = "isil,isl1208"; > + reg = <0x6f>; > + }; > + }; > -- > 2.25.1 >
Hi Trent Piepho, Thanks for the feedback. > Subject: Re: [PATCH v6 05/11] dt-bindings: rtc: isl1208: Convert to json- > schema > > On Fri, Jun 2, 2023 at 7:24 AM Biju Das <biju.das.jz@bp.renesas.com> > wrote: > > > > Convert the isl1208 RTC device tree binding documentation to json- > schema. > > > > Update the example to match reality. > > I still don't know why you say this and changed the example to be as > simple as possible. > > Did you test it and does it not work with the actual driver? I looked at > the code for parsing OF interrupts and it does not look like anything has > changed to make it not work. Nor do I see anything incorrect in the > original example. Can you explain what you think is wrong with the > original example? There is nothing wrong with example. The only reason is there is no dts in mainline matching with example. If I am correct, example should match with reality. If it is not the case, I am happy to update the example. I have seen people(including me) sending patches to update example with reality. Note: Can you please confirm rtctest[1] is passing with interrupts in your environment? In my board interrupt is not populated. So it is good to know RTC test which involves IRQ is passing in your environment. [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/tools/testing/selftests/rtc/rtctest.c?h=next-20230609 Cheers, Biju > > > + > > + rtc_twi: rtc@6f { > > + compatible = "isil,isl1208"; > > + reg = <0x6f>; > > + }; > > + }; > > -- > > 2.25.1 > >
Hello, On 09/06/2023 06:42:59+0000, Biju Das wrote: > Hi Alexandre Belloni, > > Is it ok, if I send isl1208 driver enhancement patches patch#5 to patch#10, > as it has no dependencies? > I was still waiting on a review from the DT maintainers on 6/11 to apply the series. > Patch#11 will send later based on the discussion [1] > > [1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20230602142426.438375-2-biju.das.jz@bp.renesas.com/ > > Cheers, > Biju > > > -----Original Message----- > > From: Biju Das <biju.das.jz@bp.renesas.com> > > Sent: Friday, June 2, 2023 3:24 PM > > To: Alessandro Zummo <a.zummo@towertech.it>; Alexandre Belloni > > <alexandre.belloni@bootlin.com>; Rob Herring <robh+dt@kernel.org>; > > Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>; Conor Dooley > > <conor+dt@kernel.org> > > Cc: Biju Das <biju.das.jz@bp.renesas.com>; Trent Piepho > > <tpiepho@gmail.com>; linux-rtc@vger.kernel.org; > > devicetree@vger.kernel.org; Geert Uytterhoeven <geert+renesas@glider.be>; > > Fabrizio Castro <fabrizio.castro.jz@renesas.com>; linux-renesas- > > soc@vger.kernel.org; Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > Subject: [PATCH v6 05/11] dt-bindings: rtc: isl1208: Convert to json- > > schema > > > > Convert the isl1208 RTC device tree binding documentation to json-schema. > > > > Update the example to match reality. > > > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > v5->v6: > > * No change > > v4_new->v5: > > * No change. > > v4->v4_new: > > * Moved this patch to PMIC series > > * Added minItems to interrupt-names. > > * Added interrupt-names in conditional schema check. > > v3->v4: > > * Added Rb tag from Krzysztof Kozlowski. > > * Dropped | from description > > * Replaced the pin name #EVDET->EVDET in description. > > * Dropped oneOf from compatible. > > v2->v3: > > * Updated interrupt-names property by keeping the list of names. > > * Removed Interrupts from required property as it may not be wired. > > * Removed isil,ev-evienb from required property. > > RFC->v2: > > * Updated maintainers list > > * Updated description from original bindings > > * removed default from isil,ev-evienb properties to match with the > > original > > bindings. > > * Added conditional check for interrupts. > > --- > > .../devicetree/bindings/rtc/isil,isl1208.txt | 38 -------- > > .../devicetree/bindings/rtc/isil,isl1208.yaml | 89 +++++++++++++++++++ > > 2 files changed, 89 insertions(+), 38 deletions(-) delete mode 100644 > > Documentation/devicetree/bindings/rtc/isil,isl1208.txt > > create mode 100644 > > Documentation/devicetree/bindings/rtc/isil,isl1208.yaml > > > > diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt > > b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt > > deleted file mode 100644 > > index 51f003006f04..000000000000 > > --- a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt > > +++ /dev/null > > @@ -1,38 +0,0 @@ > > -Intersil ISL1209/19 I2C RTC/Alarm chip with event in > > - > > -ISL12X9 have additional pins EVIN and #EVDET for tamper detection, while > > the > > -ISL1208 and ISL1218 do not. They are all use the same driver with the > > bindings -described here, with chip specific properties as noted. > > - > > -Required properties supported by the device: > > - - "compatible": Should be one of the following: > > - - "isil,isl1208" > > - - "isil,isl1209" > > - - "isil,isl1218" > > - - "isil,isl1219" > > - - "reg": I2C bus address of the device > > - > > -Optional properties: > > - - "interrupt-names": list which may contains "irq" and "evdet" > > - evdet applies to isl1209 and isl1219 only > > - - "interrupts": list of interrupts for "irq" and "evdet" > > - evdet applies to isl1209 and isl1219 only > > - - "isil,ev-evienb": Enable or disable internal pull on EVIN pin > > - Applies to isl1209 and isl1219 only > > - Possible values are 0 and 1 > > - Value 0 enables internal pull-up on evin pin, 1 disables it. > > - Default will leave the non-volatile configuration of the pullup > > - as is. > > - > > -Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 and > > #EVDET pin -connected to SoC gpio2 pin 24 and internal pull-up enabled in > > EVIN pin. > > - > > - isl1219: rtc@68 { > > - compatible = "isil,isl1219"; > > - reg = <0x68>; > > - interrupt-names = "irq", "evdet"; > > - interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>, > > - <&gpio2 24 IRQ_TYPE_EDGE_FALLING>; > > - isil,ev-evienb = <1>; > > - }; > > - > > diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml > > b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml > > new file mode 100644 > > index 000000000000..565965147ce6 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml > > @@ -0,0 +1,89 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 > > +--- > > +$id: > > +https://jpn01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevice > > +tree.org%2Fschemas%2Frtc%2Fisil%2Cisl1208.yaml%23&data=05%7C01%7Cbiju.d > > +as.jz%40bp.renesas.com%7C6425b765422a4c478a9b08db63752444%7C53d82571da1 > > +947e49cb4625a166a4a2a%7C0%7C0%7C638213126986073790%7CUnknown%7CTWFpbGZs > > +b3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D% > > +7C3000%7C%7C%7C&sdata=MWVlU9PbKqZwsoKfLM595a%2BM8kNNScTer6VApvxwlPY%3D& > > +reserved=0 > > +$schema: > > +https://jpn01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevice > > +tree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C01%7Cbiju.das.jz%40bp. > > +renesas.com%7C6425b765422a4c478a9b08db63752444%7C53d82571da1947e49cb462 > > +5a166a4a2a%7C0%7C0%7C638213126986073790%7CUnknown%7CTWFpbGZsb3d8eyJWIjo > > +iMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7 > > +C%7C&sdata=xq1qpnrXLjjAr06kMBWUSRqJcY5leluI3JR%2BPZ%2FoU%2F8%3D&reserve > > +d=0 > > + > > +title: Intersil ISL1209/19 I2C RTC/Alarm chip with event in > > + > > +maintainers: > > + - Biju Das <biju.das.jz@bp.renesas.com> > > + - Trent Piepho <tpiepho@gmail.com> > > + > > +description: > > + ISL12X9 have additional pins EVIN and EVDET for tamper detection, > > +while the > > + ISL1208 and ISL1218 do not. > > + > > +properties: > > + compatible: > > + enum: > > + - isil,isl1208 > > + - isil,isl1209 > > + - isil,isl1218 > > + - isil,isl1219 > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + minItems: 1 > > + maxItems: 2 > > + > > + interrupt-names: > > + minItems: 1 > > + items: > > + - const: irq > > + - const: evdet > > + > > + isil,ev-evienb: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + enum: [ 0, 1 ] > > + description: | > > + Enable or disable internal pull on EVIN pin > > + Default will leave the non-volatile configuration of the pullup > > + as is. > > + <0> : Enables internal pull-up on evin pin > > + <1> : Disables internal pull-up on evin pin > > + > > +required: > > + - compatible > > + - reg > > + > > +allOf: > > + - $ref: rtc.yaml# > > + - if: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - isil,isl1209 > > + - isil,isl1219 > > + then: > > + properties: > > + interrupts: > > + maxItems: 2 > > + interrupt-names: > > + items: > > + - const: irq > > + - const: evdet > > + else: > > + properties: > > + interrupts: > > + maxItems: 1 > > + interrupt-names: > > + items: > > + - const: irq > > + > > +unevaluatedProperties: false > > + > > +examples: > > + - | > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + rtc_twi: rtc@6f { > > + compatible = "isil,isl1208"; > > + reg = <0x6f>; > > + }; > > + }; > > -- > > 2.25.1 >
On Fri, Jun 09, 2023 at 03:48:31PM +0200, Alexandre Belloni wrote: > Hello, > > On 09/06/2023 06:42:59+0000, Biju Das wrote: > > Hi Alexandre Belloni, > > > > Is it ok, if I send isl1208 driver enhancement patches patch#5 to patch#10, > > as it has no dependencies? > > > > I was still waiting on a review from the DT maintainers on 6/11 to apply > the series. It should have one, no? Although I am new as of -rc1 and the information is unlikely to have propagated far maintainers wise. https://www.kernel.org/doc/html/latest/process/maintainers.html#open-firmware-and-flattened-device-tree-bindings Cheers, Conor.
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt b/Documentation/devicetree/bindings/rtc/isil,isl1208.txt deleted file mode 100644 index 51f003006f04..000000000000 --- a/Documentation/devicetree/bindings/rtc/isil,isl1208.txt +++ /dev/null @@ -1,38 +0,0 @@ -Intersil ISL1209/19 I2C RTC/Alarm chip with event in - -ISL12X9 have additional pins EVIN and #EVDET for tamper detection, while the -ISL1208 and ISL1218 do not. They are all use the same driver with the bindings -described here, with chip specific properties as noted. - -Required properties supported by the device: - - "compatible": Should be one of the following: - - "isil,isl1208" - - "isil,isl1209" - - "isil,isl1218" - - "isil,isl1219" - - "reg": I2C bus address of the device - -Optional properties: - - "interrupt-names": list which may contains "irq" and "evdet" - evdet applies to isl1209 and isl1219 only - - "interrupts": list of interrupts for "irq" and "evdet" - evdet applies to isl1209 and isl1219 only - - "isil,ev-evienb": Enable or disable internal pull on EVIN pin - Applies to isl1209 and isl1219 only - Possible values are 0 and 1 - Value 0 enables internal pull-up on evin pin, 1 disables it. - Default will leave the non-volatile configuration of the pullup - as is. - -Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 and #EVDET pin -connected to SoC gpio2 pin 24 and internal pull-up enabled in EVIN pin. - - isl1219: rtc@68 { - compatible = "isil,isl1219"; - reg = <0x68>; - interrupt-names = "irq", "evdet"; - interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>, - <&gpio2 24 IRQ_TYPE_EDGE_FALLING>; - isil,ev-evienb = <1>; - }; - diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml new file mode 100644 index 000000000000..565965147ce6 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/isil,isl1208.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intersil ISL1209/19 I2C RTC/Alarm chip with event in + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + - Trent Piepho <tpiepho@gmail.com> + +description: + ISL12X9 have additional pins EVIN and EVDET for tamper detection, while the + ISL1208 and ISL1218 do not. + +properties: + compatible: + enum: + - isil,isl1208 + - isil,isl1209 + - isil,isl1218 + - isil,isl1219 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - const: irq + - const: evdet + + isil,ev-evienb: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: | + Enable or disable internal pull on EVIN pin + Default will leave the non-volatile configuration of the pullup + as is. + <0> : Enables internal pull-up on evin pin + <1> : Disables internal pull-up on evin pin + +required: + - compatible + - reg + +allOf: + - $ref: rtc.yaml# + - if: + properties: + compatible: + contains: + enum: + - isil,isl1209 + - isil,isl1219 + then: + properties: + interrupts: + maxItems: 2 + interrupt-names: + items: + - const: irq + - const: evdet + else: + properties: + interrupts: + maxItems: 1 + interrupt-names: + items: + - const: irq + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; + };