| Message ID | 20100708161040.23957.36738.stgit@localhost.localdomain (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On Thu, Jul 08, 2010 at 05:11:38PM +0100, Alan Cox wrote: > From: Samuli Konttila <samuli.konttila@aavamobile.com> > > Add support for the cy8ctmg110 capacitive touchscreen used on some embedded > devices. > > (Some clean up by Alan Cox) > > Signed-off-by: Alan Cox <alan@linux.intel.com> > --- > > drivers/input/touchscreen/Kconfig | 14 + > drivers/input/touchscreen/Makefile | 1 > drivers/input/touchscreen/cy8ctmg110_ts.c | 470 +++++++++++++++++++++++++++++ > 3 files changed, 485 insertions(+), 0 deletions(-) > create mode 100644 drivers/input/touchscreen/cy8ctmg110_ts.c > > > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > index 625e625..8393f47 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -612,4 +612,18 @@ config TOUCHSCREEN_STMPE > To compile this driver as a module, choose M here: the > module will be called stmpe-ts. > > +config TOUCHSCREEN_CY8CTMG110 > + tristate "cy8ctmg110 touchscreen" > + depends on I2C > + depends on GPIOLIB > + > + help > + Say Y here if you have a cy8ctmg110 capacitive touchscreen on > + an AAVA device. > + > + If unsure, say N. > + > + To compile this driver as a module, choose M here: the > + module will be called cy8ctmg110_ts. > + > endif > diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile > index 963fec2..662d066 100644 > --- a/drivers/input/touchscreen/Makefile > +++ b/drivers/input/touchscreen/Makefile > @@ -14,6 +14,7 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o > obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o > obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o > obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o > +obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o > obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o > obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o > obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o > diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c > new file mode 100644 > index 0000000..e7017c7 > --- /dev/null > +++ b/drivers/input/touchscreen/cy8ctmg110_ts.c > @@ -0,0 +1,470 @@ > +/* > + * cy8ctmg110_ts.c Driver for cypress touch screen controller > + * Copyright (c) 2009 Aava Mobile > + * > + * Some cleanups by Alan Cox <alan@linux.intel.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > + */ > + > +#include <linux/module.h> > +#include <linux/kernel.h> > +#include <linux/input.h> > +#include <linux/slab.h> > +#include <linux/interrupt.h> > +#include <linux/io.h> > +#include <linux/i2c.h> > +#include <linux/timer.h> > +#include <linux/gpio.h> > +#include <linux/hrtimer.h> > + > +#define CY8CTMG110_DRIVER_NAME "cy8ctmg110" > + > +/* HW definitions */ > +#define CY8CTMG110_RESET_PIN_GPIO 43 > +#define CY8CTMG110_IRQ_PIN_GPIO 59 > +#define CY8CTMG110_I2C_ADDR 0x38 > +#define CY8CTMG110_TOUCH_IRQ 21 > + > +/* Touch coordinates */ > +#define CY8CTMG110_X_MIN 0 > +#define CY8CTMG110_Y_MIN 0 > +#define CY8CTMG110_X_MAX 864 > +#define CY8CTMG110_Y_MAX 480 > + > + > +/* cy8ctmg110 register definitions */ > +#define CY8CTMG110_TOUCH_WAKEUP_TIME 0 > +#define CY8CTMG110_TOUCH_SLEEP_TIME 2 > +#define CY8CTMG110_TOUCH_X1 3 > +#define CY8CTMG110_TOUCH_Y1 5 > +#define CY8CTMG110_TOUCH_X2 7 > +#define CY8CTMG110_TOUCH_Y2 9 > +#define CY8CTMG110_FINGERS 11 > +#define CY8CTMG110_GESTURE 12 > +#define CY8CTMG110_REG_MAX 13 > + > +#define CY8CTMG110_POLL_TIMER_DELAY (1000*1000*100) > +#define TOUCH_MAX_I2C_FAILS 50 > + > +/* Scale factors for coordinates */ > +#define X_SCALE_FACTOR 9387/8424 > +#define Y_SCALE_FACTOR 97/100 > + > +/* Polling mode */ > +static int polling; > +module_param(polling, int, 0); > +MODULE_PARM_DESC(polling, "Set to enable polling of the touchscreen"); If we keep this parameter (but see below) it should be bool I think. > + > + > +/* > + * The touch position structure. > + */ > +struct ts_event { > + int x1; > + int y1; > + int x2; > + int y2; > +}; Are there more changes to the driver? Currently I do not see the reason for having this structure. > + > +/* > + * The touch driver structure. > + */ > +struct cy8ctmg110 { > + struct input_dev *input; > + char phys[32]; > + struct ts_event tc; > + struct i2c_client *client; > + spinlock_t lock; > + bool sleepmode; > + int polling; > + struct hrtimer timer; > +}; > + > +/* > + * cy8ctmg110_power is the routine that is called when touch hardware > + * will powered off or on. > + */ > +static void cy8ctmg110_power(int poweron) bool poweron? > +{ > + gpio_direction_output(CY8CTMG110_RESET_PIN_GPIO, 1 - poweron); > +} > + > +/* > + * cy8ctmg110_write_req write regs to the i2c devices > + */ > +static int cy8ctmg110_write_req(struct cy8ctmg110 *tsc, unsigned char reg, > + unsigned char len, unsigned char *value) > +{ > + struct i2c_client *client = tsc->client; > + unsigned int ret; > + unsigned char i2c_data[6]; > + > + BUG_ON(len > 5); > + > + i2c_data[0] = reg; > + memcpy(i2c_data + 1, value, len); > + > + ret = i2c_master_send(client, i2c_data, len + 1); > + if (ret != 1) { > + dev_err(&client->dev, > + "cy8ctmg110 touch : i2c write data cmd failed\n"); > + return ret; > + } > + return 0; > +} > + > +/* > + * cy8ctmg110_read_req read regs from i2c devise > + */ > + > +static int cy8ctmg110_read_req(struct cy8ctmg110 *tsc, > + unsigned char *i2c_data, unsigned char len, unsigned char cmd) > +{ > + struct i2c_client *client = tsc->client; > + unsigned int ret; > + > + /* first write slave position to i2c devices */ > + ret = i2c_master_send(client, &cmd, 1); > + if (ret != 1) > + return ret; > + > + /* Second read data from position */ > + ret = i2c_master_recv(client, i2c_data, 1); > + if (ret != 1) > + return ret; I think Jean recomments i2c_transfer() which is atomic. > + return 0; > +} > + > +/* > + * cy8ctmg110_send_event delevery touch event to the userpace > + * function use normal input interface > + */ > +static void cy8ctmg110_send_event(void *tsc) > +{ > + struct cy8ctmg110 *ts = tsc; > + struct input_dev *input = ts->input; > + u16 x, y; > + u16 x2, y2; > + > + x = ts->tc.x1; > + y = ts->tc.y1; > + > + input_report_key(input, BTN_TOUCH, 1); > + x2 = (u16) (y * X_SCALE_FACTOR); > + y2 = (u16) (x * Y_SCALE_FACTOR); Why do we scale in kernel? We should be reportig raw coordinates and let userspace to scale if needed. > + input_report_abs(input, ABS_X, x2); > + input_report_abs(input, ABS_Y, y2); > + input_sync(input); > +} > + > +/* > + * cy8ctmg110_touch_pos check touch position from i2c devices > + */ > +static int cy8ctmg110_touch_pos(struct cy8ctmg110 *tsc) > +{ > + unsigned char reg_p[CY8CTMG110_REG_MAX]; > + int x, y; > + > + memset(reg_p, 0, CY8CTMG110_REG_MAX); > + > + /* Reading coordinates */ > + if (cy8ctmg110_read_req(tsc, reg_p, 9, CY8CTMG110_TOUCH_X1) != 0) > + return -EIO; > + > + y = reg_p[2] << 8 | reg_p[3]; > + x = reg_p[0] << 8 | reg_p[1]; > + > + /* Number of touch */ > + if (reg_p[8] == 0) { > + struct input_dev *input = tsc->input; > + input_report_key(input, BTN_TOUCH, 0); > + input_sync(input); > + } else if (tsc->tc.x1 != x || tsc->tc.y1 != y) { > + tsc->tc.y1 = y; > + tsc->tc.x1 = x; > + cy8ctmg110_send_event(tsc); Send always, input core will filter out duplicates, if needed. > + } > + return 0; > +} > + > +/* > + * If the interrupt isn't in use the touch positions can be read by polling > + */ > +static enum hrtimer_restart cy8ctmg110_timer(struct hrtimer *handle) > +{ > + struct cy8ctmg110 *ts = container_of(handle, struct cy8ctmg110, timer); > + > + cy8ctmg110_touch_pos(ts); > + hrtimer_start(&ts->timer, > + ktime_set(0, CY8CTMG110_POLL_TIMER_DELAY), HRTIMER_MODE_REL); > + > + return HRTIMER_NORESTART; > +} > + > +/* > + * cy8ctmg110_init_controller set init value to touchcontroller > + */ > +static bool cy8ctmg110_set_sleepmode(struct cy8ctmg110 *ts) I'd rather target sleep mode been passed as a parameter... Do we evn need to store it in ts structure? > +{ > + unsigned char reg_p[3]; > + > + if (ts->sleepmode == true) { > + reg_p[0] = 0x00; > + reg_p[1] = 0xff; > + reg_p[2] = 5; > + } else { > + reg_p[0] = 0x10; > + reg_p[1] = 0xff; > + reg_p[2] = 0; > + } > + > + if (cy8ctmg110_write_req(ts, CY8CTMG110_TOUCH_WAKEUP_TIME, 3, reg_p)) > + return false; > + return true; > +} > + > +/* > + * cy8ctmg110_irq_handler irq handling function > + */ > + > +static irqreturn_t cy8ctmg110_irq_handler(int irq, void *dev_id) > +{ > + struct cy8ctmg110 *tsc = (struct cy8ctmg110 *) dev_id; > + cy8ctmg110_touch_pos(tsc); > + return IRQ_HANDLED; > +} > + > +static int cy8ctmg110_probe(struct i2c_client *client, > + const struct i2c_device_id *id) __devinit. > +{ > + struct cy8ctmg110 *ts; > + struct input_dev *input_dev; > + int err; > + > + client->irq = CY8CTMG110_TOUCH_IRQ; Eww... > + > + if (!i2c_check_functionality(client->adapter, > + I2C_FUNC_SMBUS_READ_WORD_DATA)) > + return -EIO; > + > + ts = kzalloc(sizeof(struct cy8ctmg110), GFP_KERNEL); > + input_dev = input_allocate_device(); > + > + if (!ts || !input_dev) { > + err = -ENOMEM; > + goto err_free_mem; > + } > + > + ts->client = client; > + i2c_set_clientdata(client, ts); > + > + ts->input = input_dev; > + ts->polling = polling; > + > + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", > + dev_name(&client->dev)); > + > + input_dev->name = CY8CTMG110_DRIVER_NAME " Touchscreen"; > + input_dev->phys = ts->phys; > + input_dev->id.bustype = BUS_I2C; Set up input_dev->dev.parent = client->... > + > + spin_lock_init(&ts->lock); > + > + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); > + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); > + > + input_set_capability(input_dev, EV_KEY, BTN_TOUCH); > + > + input_set_abs_params(input_dev, ABS_X, > + CY8CTMG110_X_MIN, CY8CTMG110_X_MAX, 0, 0); > + input_set_abs_params(input_dev, ABS_Y, > + CY8CTMG110_Y_MIN, CY8CTMG110_Y_MAX, 0, 0); > + > + err = gpio_request(CY8CTMG110_RESET_PIN_GPIO, NULL); > + > + if (err) { > + dev_err(&client->dev, > + "cy8ctmg110_ts: Unable to request GPIO pin %d.\n", > + CY8CTMG110_RESET_PIN_GPIO); > + goto err_free_mem; > + } > + cy8ctmg110_power(1); > + cy8ctmg110_set_sleepmode(ts); > + > + hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); > + ts->timer.function = cy8ctmg110_timer; > + > + if (ts->polling == 0) { > + /* Can we fall back to polling if these bits fail - something > + to look at for robustness */ Frankly, anything that polls with high frequency in a mobile device is plainly not useful. I'd just kill these polling bits altogether. > + err = gpio_request(CY8CTMG110_IRQ_PIN_GPIO, "touch_irq_key"); Always the same GPIO number? > + if (err < 0) { > + dev_err(&client->dev, > + "cy8ctmg110_ts: failed to request GPIO %d, error %d\n", > + CY8CTMG110_IRQ_PIN_GPIO, err); > + ts->polling = 1; > + goto failed_irq; > + } > + err = gpio_direction_input(CY8CTMG110_IRQ_PIN_GPIO); > + > + if (err < 0) { > + dev_err(&client->dev, > + "cy8ctmg110_ts: failed to configure input direction for GPIO %d, error %d\n", > + CY8CTMG110_IRQ_PIN_GPIO, err); > + gpio_free(CY8CTMG110_IRQ_PIN_GPIO); > + ts->polling = 1; > + goto failed_irq; > + } > + client->irq = gpio_to_irq(CY8CTMG110_IRQ_PIN_GPIO); > + if (client->irq < 0) { > + err = client->irq; > + dev_err(&client->dev, > + "cy8ctmg110_ts: Unable to get irq number for GPIO %d, error %d\n", > + CY8CTMG110_IRQ_PIN_GPIO, err); Please idnt properly, I do not care about 80 lines limit if the result causes bad identation. We can also drop "cy8ctmg110_ts: " prefixes - dev_xxx() shousl give enogh context. > + gpio_free(CY8CTMG110_IRQ_PIN_GPIO); > + ts->polling = 1; > + goto failed_irq; > + } > + err = request_irq(client->irq, cy8ctmg110_irq_handler, > + IRQF_TRIGGER_RISING | IRQF_SHARED, > + "touch_reset_key", ts); > + if (err < 0) { > + dev_err(&client->dev, > + "cy8ctmg110 irq %d busy? error %d\n", > + client->irq, err); > + gpio_free(CY8CTMG110_IRQ_PIN_GPIO); > + ts->polling = 1; > + } > + } > +failed_irq: > + if (ts->polling) > + hrtimer_start(&ts->timer, ktime_set(10, 0), HRTIMER_MODE_REL); > + > + err = input_register_device(input_dev); > + if (!err) > + return 0; > + > + if (ts->polling) > + hrtimer_cancel(&ts->timer); > + else > + free_irq(client->irq, ts); > + gpio_free(CY8CTMG110_IRQ_PIN_GPIO); > + gpio_free(CY8CTMG110_RESET_PIN_GPIO); > +err_free_mem: > + input_free_device(input_dev); > + kfree(ts); > + return err; > +} > + > +#ifdef CONFIG_PM > +/* > + * cy8ctmg110_suspend > + */ Useless comment. > + > +static int cy8ctmg110_suspend(struct i2c_client *client, pm_message_t mesg) > +{ > + struct cy8ctmg110 *ts = i2c_get_clientdata(client); > + > + if (ts->polling) > + hrtimer_cancel(&ts->timer); > + if (device_may_wakeup(&client->dev)) > + enable_irq_wake(client->irq); > + else { > + ts->sleepmode = true; > + cy8ctmg110_set_sleepmode(ts); > + cy8ctmg110_power(0); > + } > + return 0; > +} > + > +/* > + * cy8ctmg110_resume > + */ Useless comment. > + > +static int cy8ctmg110_resume(struct i2c_client *client) > +{ > + struct cy8ctmg110 *ts = i2c_get_clientdata(client); > + > + if (device_may_wakeup(&client->dev)) > + disable_irq_wake(client->irq); > + else { > + cy8ctmg110_power(1); > + ts->sleepmode = false; > + cy8ctmg110_set_sleepmode(ts); > + } > + if (ts->polling) > + hrtimer_start(&ts->timer, ktime_set(10, 0), HRTIMER_MODE_REL); > + return 0; > +} > +#endif > + > +/* > + * cy8ctmg110_remove > + */ > + > +static int cy8ctmg110_remove(struct i2c_client *client) __devexit. > +{ > + struct cy8ctmg110 *ts = i2c_get_clientdata(client); > + > + cy8ctmg110_power(0); > + > + if (ts->polling) > + hrtimer_cancel(&ts->timer); > + free_irq(client->irq, ts); > + input_unregister_device(ts->input); > + gpio_free(CY8CTMG110_IRQ_PIN_GPIO); > + gpio_free(CY8CTMG110_RESET_PIN_GPIO); > + kfree(ts); > + return 0; > +} > + > +static struct i2c_device_id cy8ctmg110_idtable[] = { > + {CY8CTMG110_DRIVER_NAME, 1}, > + {} > +}; > + > +MODULE_DEVICE_TABLE(i2c, cy8ctmg110_idtable); > + > +static struct i2c_driver cy8ctmg110_driver = { > + .driver = { > + .owner = THIS_MODULE, > + .name = CY8CTMG110_DRIVER_NAME, > + .bus = &i2c_bus_type, > + }, > + .id_table = cy8ctmg110_idtable, > + .probe = cy8ctmg110_probe, > + .remove = cy8ctmg110_remove, __devexit_p() > +#ifdef CONFIG_PM > + .suspend = cy8ctmg110_suspend, > + .resume = cy8ctmg110_resume, > +#endif > +}; > + > +static int __init cy8ctmg110_init(void) > +{ > + return i2c_add_driver(&cy8ctmg110_driver); > +} > + > +static void __exit cy8ctmg110_exit(void) > +{ > + i2c_del_driver(&cy8ctmg110_driver); > +} > + > +module_init(cy8ctmg110_init); > +module_exit(cy8ctmg110_exit); > + > +MODULE_AUTHOR("Samuli Konttila <samuli.konttila@aavamobile.com>"); > +MODULE_DESCRIPTION("cy8ctmg110 TouchScreen Driver"); > +MODULE_LICENSE("GPL v2"); > Thanks.
On Thu, Jul 08, 2010 at 04:11:38PM -0000, Alan Cox wrote: > From: Samuli Konttila <samuli.konttila@aavamobile.com> > > Add support for the cy8ctmg110 capacitive touchscreen used on some embedded > devices. > > (Some clean up by Alan Cox) > > Signed-off-by: Alan Cox <alan@linux.intel.com> > > --- > drivers/input/touchscreen/Kconfig | 14 + > drivers/input/touchscreen/Makefile | 1 > drivers/input/touchscreen/cy8ctmg110_ts.c | 470 +++++++++++++++++++++++++++++ > 3 files changed, 485 insertions(+), 0 deletions(-) > create mode 100644 drivers/input/touchscreen/cy8ctmg110_ts.c > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-input" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > <snip> > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > +/* > + * cy8ctmg110_write_req write regs to the i2c devices > + */ > +static int cy8ctmg110_write_req(struct cy8ctmg110 *tsc, unsigned char reg, ^ s/req/reg > + unsigned char len, unsigned char *value) > +{ > + struct i2c_client *client = tsc->client; > + unsigned int ret; > + unsigned char i2c_data[6]; > + > + BUG_ON(len > 5); > + > + i2c_data[0] = reg; > + memcpy(i2c_data + 1, value, len); > + > + ret = i2c_master_send(client, i2c_data, len + 1); > + if (ret != 1) { > + dev_err(&client->dev, > + "cy8ctmg110 touch : i2c write data cmd failed\n"); > + return ret; > + } > + return 0; > +} > + > +/* > + * cy8ctmg110_read_req read regs from i2c devise > + */ > + > +static int cy8ctmg110_read_req(struct cy8ctmg110 *tsc, ditto > + unsigned char *i2c_data, unsigned char len, unsigned char cmd) > +{ > + struct i2c_client *client = tsc->client; > + unsigned int ret; > + > + /* first write slave position to i2c devices */ > + ret = i2c_master_send(client, &cmd, 1); > + if (ret != 1) > + return ret; > + > + /* Second read data from position */ > + ret = i2c_master_recv(client, i2c_data, 1); > + if (ret != 1) > + return ret; > + return 0; > +} > + <snip> > +/* > + * cy8ctmg110_irq_handler irq handling function > + */ > + > +static irqreturn_t cy8ctmg110_irq_handler(int irq, void *dev_id) > +{ > + struct cy8ctmg110 *tsc = (struct cy8ctmg110 *) dev_id; > + cy8ctmg110_touch_pos(tsc); i2c from an interrupt handler? Is there some problem with using a threaded irq handler? I see this stuff ends up in i2c_transfer() which will fail with -EAGAIN if it can't get the bus lock while irqs are disabled. But -EAGAIN apparently isn't handled by the driver. So what happens in that case? The event is lost? > + return IRQ_HANDLED; > +} > +
> s/req/reg ??? req - request, but reg makes more sense perhaps > > + struct cy8ctmg110 *tsc = (struct cy8ctmg110 *) dev_id; > > + cy8ctmg110_touch_pos(tsc); > > i2c from an interrupt handler? Is there some problem with using a > threaded irq handler? Threaded IRQ would certainly make sense here. Will investigate further. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> > +/* > > + * The touch position structure. > > + */ > > +struct ts_event { > > + int x1; > > + int y1; > > + int x2; > > + int y2; > > +}; > > Are there more changes to the driver? Currently I do not see the > reason for having this structure. With the other clean ups agreed. > > +/* > > + * cy8ctmg110_power is the routine that is called when touch > > hardware > > + * will powered off or on. > > + */ > > +static void cy8ctmg110_power(int poweron) > > bool poweron? If you prefer - changed > > + input_report_key(input, BTN_TOUCH, 1); > > + x2 = (u16) (y * X_SCALE_FACTOR); > > + y2 = (u16) (x * Y_SCALE_FACTOR); > > Why do we scale in kernel? We should be reportig raw coordinates and > let userspace to scale if needed. Ok > > + } else if (tsc->tc.x1 != x || tsc->tc.y1 != y) { > > + tsc->tc.y1 = y; > > + tsc->tc.x1 = x; > > + cy8ctmg110_send_event(tsc); > > Send always, input core will filter out duplicates, if needed. Done and cleaned up the surrounding bits > > + client->irq = CY8CTMG110_TOUCH_IRQ; > > Eww... Real hardware/firmware isn't always pretty - its a mix of GPIO and I²C interfaces. > Set up input_dev->dev.parent = client->... Done > Frankly, anything that polls with high frequency in a mobile device is > plainly not useful. I'd just kill these polling bits altogether. For production hardware yes. I'll split polling out as we can keep that internally and then burn it when its not needed. > > + err = gpio_request(CY8CTMG110_IRQ_PIN_GPIO, > > "touch_irq_key"); > > Always the same GPIO number? Yes. > Please idnt properly, I do not care about 80 lines limit if the result > causes bad identation. We can also drop "cy8ctmg110_ts: " prefixes - > dev_xxx() shousl give enogh context. Ok -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 625e625..8393f47 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -612,4 +612,18 @@ config TOUCHSCREEN_STMPE To compile this driver as a module, choose M here: the module will be called stmpe-ts. +config TOUCHSCREEN_CY8CTMG110 + tristate "cy8ctmg110 touchscreen" + depends on I2C + depends on GPIOLIB + + help + Say Y here if you have a cy8ctmg110 capacitive touchscreen on + an AAVA device. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called cy8ctmg110_ts. + endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 963fec2..662d066 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o +obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c new file mode 100644 index 0000000..e7017c7 --- /dev/null +++ b/drivers/input/touchscreen/cy8ctmg110_ts.c @@ -0,0 +1,470 @@ +/* + * cy8ctmg110_ts.c Driver for cypress touch screen controller + * Copyright (c) 2009 Aava Mobile + * + * Some cleanups by Alan Cox <alan@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/timer.h> +#include <linux/gpio.h> +#include <linux/hrtimer.h> + +#define CY8CTMG110_DRIVER_NAME "cy8ctmg110" + +/* HW definitions */ +#define CY8CTMG110_RESET_PIN_GPIO 43 +#define CY8CTMG110_IRQ_PIN_GPIO 59 +#define CY8CTMG110_I2C_ADDR 0x38 +#define CY8CTMG110_TOUCH_IRQ 21 + +/* Touch coordinates */ +#define CY8CTMG110_X_MIN 0 +#define CY8CTMG110_Y_MIN 0 +#define CY8CTMG110_X_MAX 864 +#define CY8CTMG110_Y_MAX 480 + + +/* cy8ctmg110 register definitions */ +#define CY8CTMG110_TOUCH_WAKEUP_TIME 0 +#define CY8CTMG110_TOUCH_SLEEP_TIME 2 +#define CY8CTMG110_TOUCH_X1 3 +#define CY8CTMG110_TOUCH_Y1 5 +#define CY8CTMG110_TOUCH_X2 7 +#define CY8CTMG110_TOUCH_Y2 9 +#define CY8CTMG110_FINGERS 11 +#define CY8CTMG110_GESTURE 12 +#define CY8CTMG110_REG_MAX 13 + +#define CY8CTMG110_POLL_TIMER_DELAY (1000*1000*100) +#define TOUCH_MAX_I2C_FAILS 50 + +/* Scale factors for coordinates */ +#define X_SCALE_FACTOR 9387/8424 +#define Y_SCALE_FACTOR 97/100 + +/* Polling mode */ +static int polling; +module_param(polling, int, 0); +MODULE_PARM_DESC(polling, "Set to enable polling of the touchscreen"); + + +/* + * The touch position structure. + */ +struct ts_event { + int x1; + int y1; + int x2; + int y2; +}; + +/* + * The touch driver structure. + */ +struct cy8ctmg110 { + struct input_dev *input; + char phys[32]; + struct ts_event tc; + struct i2c_client *client; + spinlock_t lock; + bool sleepmode; + int polling; + struct hrtimer timer; +}; + +/* + * cy8ctmg110_power is the routine that is called when touch hardware + * will powered off or on. + */ +static void cy8ctmg110_power(int poweron) +{ + gpio_direction_output(CY8CTMG110_RESET_PIN_GPIO, 1 - poweron); +} + +/* + * cy8ctmg110_write_req write regs to the i2c devices + */ +static int cy8ctmg110_write_req(struct cy8ctmg110 *tsc, unsigned char reg, + unsigned char len, unsigned char *value) +{ + struct i2c_client *client = tsc->client; + unsigned int ret; + unsigned char i2c_data[6]; + + BUG_ON(len > 5); + + i2c_data[0] = reg; + memcpy(i2c_data + 1, value, len); + + ret = i2c_master_send(client, i2c_data, len + 1); + if (ret != 1) { + dev_err(&client->dev, + "cy8ctmg110 touch : i2c write data cmd failed\n"); + return ret; + } + return 0; +} + +/* + * cy8ctmg110_read_req read regs from i2c devise + */ + +static int cy8ctmg110_read_req(struct cy8ctmg110 *tsc, + unsigned char *i2c_data, unsigned char len, unsigned char cmd) +{ + struct i2c_client *client = tsc->client; + unsigned int ret; + + /* first write slave position to i2c devices */ + ret = i2c_master_send(client, &cmd, 1); + if (ret != 1) + return ret; + + /* Second read data from position */ + ret = i2c_master_recv(client, i2c_data, 1); + if (ret != 1) + return ret; + return 0; +} + +/* + * cy8ctmg110_send_event delevery touch event to the userpace + * function use normal input interface + */ +static void cy8ctmg110_send_event(void *tsc) +{ + struct cy8ctmg110 *ts = tsc; + struct input_dev *input = ts->input; + u16 x, y; + u16 x2, y2; + + x = ts->tc.x1; + y = ts->tc.y1; + + input_report_key(input, BTN_TOUCH, 1); + x2 = (u16) (y * X_SCALE_FACTOR); + y2 = (u16) (x * Y_SCALE_FACTOR); + input_report_abs(input, ABS_X, x2); + input_report_abs(input, ABS_Y, y2); + input_sync(input); +} + +/* + * cy8ctmg110_touch_pos check touch position from i2c devices + */ +static int cy8ctmg110_touch_pos(struct cy8ctmg110 *tsc) +{ + unsigned char reg_p[CY8CTMG110_REG_MAX]; + int x, y; + + memset(reg_p, 0, CY8CTMG110_REG_MAX); + + /* Reading coordinates */ + if (cy8ctmg110_read_req(tsc, reg_p, 9, CY8CTMG110_TOUCH_X1) != 0) + return -EIO; + + y = reg_p[2] << 8 | reg_p[3]; + x = reg_p[0] << 8 | reg_p[1]; + + /* Number of touch */ + if (reg_p[8] == 0) { + struct input_dev *input = tsc->input; + input_report_key(input, BTN_TOUCH, 0); + input_sync(input); + } else if (tsc->tc.x1 != x || tsc->tc.y1 != y) { + tsc->tc.y1 = y; + tsc->tc.x1 = x; + cy8ctmg110_send_event(tsc); + } + return 0; +} + +/* + * If the interrupt isn't in use the touch positions can be read by polling + */ +static enum hrtimer_restart cy8ctmg110_timer(struct hrtimer *handle) +{ + struct cy8ctmg110 *ts = container_of(handle, struct cy8ctmg110, timer); + + cy8ctmg110_touch_pos(ts); + hrtimer_start(&ts->timer, + ktime_set(0, CY8CTMG110_POLL_TIMER_DELAY), HRTIMER_MODE_REL); + + return HRTIMER_NORESTART; +} + +/* + * cy8ctmg110_init_controller set init value to touchcontroller + */ +static bool cy8ctmg110_set_sleepmode(struct cy8ctmg110 *ts) +{ + unsigned char reg_p[3]; + + if (ts->sleepmode == true) { + reg_p[0] = 0x00; + reg_p[1] = 0xff; + reg_p[2] = 5; + } else { + reg_p[0] = 0x10; + reg_p[1] = 0xff; + reg_p[2] = 0; + } + + if (cy8ctmg110_write_req(ts, CY8CTMG110_TOUCH_WAKEUP_TIME, 3, reg_p)) + return false; + return true; +} + +/* + * cy8ctmg110_irq_handler irq handling function + */ + +static irqreturn_t cy8ctmg110_irq_handler(int irq, void *dev_id) +{ + struct cy8ctmg110 *tsc = (struct cy8ctmg110 *) dev_id; + cy8ctmg110_touch_pos(tsc); + return IRQ_HANDLED; +} + +static int cy8ctmg110_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct cy8ctmg110 *ts; + struct input_dev *input_dev; + int err; + + client->irq = CY8CTMG110_TOUCH_IRQ; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA)) + return -EIO; + + ts = kzalloc(sizeof(struct cy8ctmg110), GFP_KERNEL); + input_dev = input_allocate_device(); + + if (!ts || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + ts->client = client; + i2c_set_clientdata(client, ts); + + ts->input = input_dev; + ts->polling = polling; + + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", + dev_name(&client->dev)); + + input_dev->name = CY8CTMG110_DRIVER_NAME " Touchscreen"; + input_dev->phys = ts->phys; + input_dev->id.bustype = BUS_I2C; + + spin_lock_init(&ts->lock); + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_capability(input_dev, EV_KEY, BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, + CY8CTMG110_X_MIN, CY8CTMG110_X_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_Y, + CY8CTMG110_Y_MIN, CY8CTMG110_Y_MAX, 0, 0); + + err = gpio_request(CY8CTMG110_RESET_PIN_GPIO, NULL); + + if (err) { + dev_err(&client->dev, + "cy8ctmg110_ts: Unable to request GPIO pin %d.\n", + CY8CTMG110_RESET_PIN_GPIO); + goto err_free_mem; + } + cy8ctmg110_power(1); + cy8ctmg110_set_sleepmode(ts); + + hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + ts->timer.function = cy8ctmg110_timer; + + if (ts->polling == 0) { + /* Can we fall back to polling if these bits fail - something + to look at for robustness */ + err = gpio_request(CY8CTMG110_IRQ_PIN_GPIO, "touch_irq_key"); + if (err < 0) { + dev_err(&client->dev, + "cy8ctmg110_ts: failed to request GPIO %d, error %d\n", + CY8CTMG110_IRQ_PIN_GPIO, err); + ts->polling = 1; + goto failed_irq; + } + err = gpio_direction_input(CY8CTMG110_IRQ_PIN_GPIO); + + if (err < 0) { + dev_err(&client->dev, + "cy8ctmg110_ts: failed to configure input direction for GPIO %d, error %d\n", + CY8CTMG110_IRQ_PIN_GPIO, err); + gpio_free(CY8CTMG110_IRQ_PIN_GPIO); + ts->polling = 1; + goto failed_irq; + } + client->irq = gpio_to_irq(CY8CTMG110_IRQ_PIN_GPIO); + if (client->irq < 0) { + err = client->irq; + dev_err(&client->dev, + "cy8ctmg110_ts: Unable to get irq number for GPIO %d, error %d\n", + CY8CTMG110_IRQ_PIN_GPIO, err); + gpio_free(CY8CTMG110_IRQ_PIN_GPIO); + ts->polling = 1; + goto failed_irq; + } + err = request_irq(client->irq, cy8ctmg110_irq_handler, + IRQF_TRIGGER_RISING | IRQF_SHARED, + "touch_reset_key", ts); + if (err < 0) { + dev_err(&client->dev, + "cy8ctmg110 irq %d busy? error %d\n", + client->irq, err); + gpio_free(CY8CTMG110_IRQ_PIN_GPIO); + ts->polling = 1; + } + } +failed_irq: + if (ts->polling) + hrtimer_start(&ts->timer, ktime_set(10, 0), HRTIMER_MODE_REL); + + err = input_register_device(input_dev); + if (!err) + return 0; + + if (ts->polling) + hrtimer_cancel(&ts->timer); + else + free_irq(client->irq, ts); + gpio_free(CY8CTMG110_IRQ_PIN_GPIO); + gpio_free(CY8CTMG110_RESET_PIN_GPIO); +err_free_mem: + input_free_device(input_dev); + kfree(ts); + return err; +} + +#ifdef CONFIG_PM +/* + * cy8ctmg110_suspend + */ + +static int cy8ctmg110_suspend(struct i2c_client *client, pm_message_t mesg) +{ + struct cy8ctmg110 *ts = i2c_get_clientdata(client); + + if (ts->polling) + hrtimer_cancel(&ts->timer); + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + else { + ts->sleepmode = true; + cy8ctmg110_set_sleepmode(ts); + cy8ctmg110_power(0); + } + return 0; +} + +/* + * cy8ctmg110_resume + */ + +static int cy8ctmg110_resume(struct i2c_client *client) +{ + struct cy8ctmg110 *ts = i2c_get_clientdata(client); + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + else { + cy8ctmg110_power(1); + ts->sleepmode = false; + cy8ctmg110_set_sleepmode(ts); + } + if (ts->polling) + hrtimer_start(&ts->timer, ktime_set(10, 0), HRTIMER_MODE_REL); + return 0; +} +#endif + +/* + * cy8ctmg110_remove + */ + +static int cy8ctmg110_remove(struct i2c_client *client) +{ + struct cy8ctmg110 *ts = i2c_get_clientdata(client); + + cy8ctmg110_power(0); + + if (ts->polling) + hrtimer_cancel(&ts->timer); + free_irq(client->irq, ts); + input_unregister_device(ts->input); + gpio_free(CY8CTMG110_IRQ_PIN_GPIO); + gpio_free(CY8CTMG110_RESET_PIN_GPIO); + kfree(ts); + return 0; +} + +static struct i2c_device_id cy8ctmg110_idtable[] = { + {CY8CTMG110_DRIVER_NAME, 1}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, cy8ctmg110_idtable); + +static struct i2c_driver cy8ctmg110_driver = { + .driver = { + .owner = THIS_MODULE, + .name = CY8CTMG110_DRIVER_NAME, + .bus = &i2c_bus_type, + }, + .id_table = cy8ctmg110_idtable, + .probe = cy8ctmg110_probe, + .remove = cy8ctmg110_remove, +#ifdef CONFIG_PM + .suspend = cy8ctmg110_suspend, + .resume = cy8ctmg110_resume, +#endif +}; + +static int __init cy8ctmg110_init(void) +{ + return i2c_add_driver(&cy8ctmg110_driver); +} + +static void __exit cy8ctmg110_exit(void) +{ + i2c_del_driver(&cy8ctmg110_driver); +} + +module_init(cy8ctmg110_init); +module_exit(cy8ctmg110_exit); + +MODULE_AUTHOR("Samuli Konttila <samuli.konttila@aavamobile.com>"); +MODULE_DESCRIPTION("cy8ctmg110 TouchScreen Driver"); +MODULE_LICENSE("GPL v2");