| Message ID | 20230523123348.52850-1-rogerq@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4] arm64: dts: ti: k3-am625: Enable Type-C port for USB0 | expand |
Hi Roger Quadros, On Tue, 23 May 2023 15:33:48 +0300, Roger Quadros wrote: > USB0 is a Type-C port with dual data role and power sink. > > I have applied the following to branch ti-k3-dts-next on [1]. Thank you! [1/1] arm64: dts: ti: k3-am625: Enable Type-C port for USB0 commit: 2c213d19515caf880e6c8266fbeda4145894c10e All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. [1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git -- Vignesh
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 2a1adda9bff6..729f95e19042 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -161,7 +161,7 @@ exp1: gpio@22 { "UART1_FET_BUF_EN", "WL_LT_EN", "GPIO_HDMI_RSTn", "CSI_GPIO1", "CSI_GPIO2", "PRU_3V3_EN", - "HDMI_INTn", "TEST_GPIO2", + "HDMI_INTn", "PD_I2C_IRQ", "MCASP1_FET_EN", "MCASP1_BUF_BT_EN", "MCASP1_FET_SEL", "UART1_FET_SEL", "TSINT#", "IO_EXP_TEST_LED"; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index 976f8303c84f..b6667c0ff826 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -242,6 +242,30 @@ &main_i2c0 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; + + typec_pd0: tps6598x@3f { + compatible = "ti,tps6598x"; + reg = <0x3f>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + self-powered; + data-role = "dual"; + power-role = "sink"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_con_hs: endpoint { + remote-endpoint = <&usb0_hs_ep>; + }; + }; + }; + }; + }; }; &main_i2c1 { @@ -321,7 +345,16 @@ &usbss1 { }; &usb0 { - dr_mode = "peripheral"; + #address-cells = <1>; + #size-cells = <0>; + usb-role-switch; + + port@0 { + reg = <0>; + usb0_hs_ep: endpoint { + remote-endpoint = <&usb_con_hs>; + }; + }; }; &usb1 {
USB0 is a Type-C port with dual data role and power sink. Signed-off-by: Roger Quadros <rogerq@kernel.org> --- Changelog: v4: - Rebase on v6.4-rc2 - Drop interrupt patch as it will break Type-C role switch on older boards. v3: - include Type-C support for am62-lp-sk - split interrupts properties for Type-C chip into am625-sk v2: - rebase off [1] - add fixes tag to patch 1 [1] - https://lore.kernel.org/all/20230321-am62-lp-sk-v2-0-0a56e1694804@ti.com/ arch/arm64/boot/dts/ti/k3-am625-sk.dts | 2 +- .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 35 ++++++++++++++++++- 2 files changed, 35 insertions(+), 2 deletions(-)