| Message ID | 20230622192245.116864-1-fido_max@inbox.ru (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4,1/1] net: axienet: Move reset before 64-bit DMA detection | expand |
On Thu, 22 Jun 2023 22:22:45 +0300 Maxim Kochetkov wrote: > 64-bit DMA detection will fail if axienet was started before (by boot > loader, boot ROM, etc). In this state axienet will not start properly. > XAXIDMA_TX_CDESC_OFFSET + 4 register (MM2S_CURDESC_MSB) is used to detect > 64-bit DMA capability here. But datasheet says: When DMACR.RS is 1 > (axienet is in enabled state), CURDESC_PTR becomes Read Only (RO) and > is used to fetch the first descriptor. So iowrite32()/ioread32() trick > to this register to detect 64-bit DMA will not work. > So move axienet reset before 64-bit DMA detection. > > Fixes: f735c40ed93c ("net: axienet: Autodetect 64-bit DMA capability") > Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> > Reviewed-by: Robert Hancock <robert.hancock@calian.com> > Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Quoting documentation: Resending after review ~~~~~~~~~~~~~~~~~~~~~~ Allow at least 24 hours to pass between postings. This will ensure reviewers from all geographical locations have a chance to chime in. Do not wait too long (weeks) between postings either as it will make it harder for reviewers to recall all the context. Make sure you address all the feedback in your new posting. Do not post a new version of the code if the discussion about the previous version is still ongoing, unless directly instructed by a reviewer. See: https://www.kernel.org/doc/html/next/process/maintainer-netdev.html#resending-after-review
Hello: This patch was applied to netdev/net.git (main) by Jakub Kicinski <kuba@kernel.org>: On Thu, 22 Jun 2023 22:22:45 +0300 you wrote: > 64-bit DMA detection will fail if axienet was started before (by boot > loader, boot ROM, etc). In this state axienet will not start properly. > XAXIDMA_TX_CDESC_OFFSET + 4 register (MM2S_CURDESC_MSB) is used to detect > 64-bit DMA capability here. But datasheet says: When DMACR.RS is 1 > (axienet is in enabled state), CURDESC_PTR becomes Read Only (RO) and > is used to fetch the first descriptor. So iowrite32()/ioread32() trick > to this register to detect 64-bit DMA will not work. > So move axienet reset before 64-bit DMA detection. > > [...] Here is the summary with links: - [v4,1/1] net: axienet: Move reset before 64-bit DMA detection https://git.kernel.org/netdev/net/c/f1bc9fc4a06d You are awesome, thank you!
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 3e310b55bce2..734822321e0a 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -2042,6 +2042,11 @@ static int axienet_probe(struct platform_device *pdev) goto cleanup_clk; } + /* Reset core now that clocks are enabled, prior to accessing MDIO */ + ret = __axienet_device_reset(lp); + if (ret) + goto cleanup_clk; + /* Autodetect the need for 64-bit DMA pointers. * When the IP is configured for a bus width bigger than 32 bits, * writing the MSB registers is mandatory, even if they are all 0. @@ -2096,11 +2101,6 @@ static int axienet_probe(struct platform_device *pdev) lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD; lp->coalesce_usec_tx = XAXIDMA_DFT_TX_USEC; - /* Reset core now that clocks are enabled, prior to accessing MDIO */ - ret = __axienet_device_reset(lp); - if (ret) - goto cleanup_clk; - ret = axienet_mdio_setup(lp); if (ret) dev_warn(&pdev->dev,
64-bit DMA detection will fail if axienet was started before (by boot loader, boot ROM, etc). In this state axienet will not start properly. XAXIDMA_TX_CDESC_OFFSET + 4 register (MM2S_CURDESC_MSB) is used to detect 64-bit DMA capability here. But datasheet says: When DMACR.RS is 1 (axienet is in enabled state), CURDESC_PTR becomes Read Only (RO) and is used to fetch the first descriptor. So iowrite32()/ioread32() trick to this register to detect 64-bit DMA will not work. So move axienet reset before 64-bit DMA detection. Fixes: f735c40ed93c ("net: axienet: Autodetect 64-bit DMA capability") Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> --- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)