| Message ID | 742b3351c1aed1f546ac2dcc1de15e0d04cc24d4.1687423204.git.geert+renesas@glider.be (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm: renesas: shmobile: Atomic conversion + DT support | expand |
Hi Geert, Thank you for the patch. On Thu, Jun 22, 2023 at 11:21:18AM +0200, Geert Uytterhoeven wrote: > The SH-Mobile LCD Controller is part of a PM Domain on all relevant SoCs > (clock domain on all, power domain on some). Hence it may not be > sufficient to manage the LCDC module clock explicitly (e.g. if the > selected clock source differs from SHMOB_DRM_CLK_BUS). > > Fix this by using Runtime PM instead. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c | 11 ++++++++++- > drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c | 5 +++++ > 2 files changed, 15 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > index fbfd906844da490c..84dbf35025d7be63 100644 > --- a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > +++ b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > @@ -9,6 +9,7 @@ > > #include <linux/backlight.h> > #include <linux/clk.h> > +#include <linux/pm_runtime.h> > > #include <drm/drm_crtc.h> > #include <drm/drm_crtc_helper.h> > @@ -170,10 +171,16 @@ static void shmob_drm_crtc_start(struct shmob_drm_crtc *scrtc) > if (WARN_ON(format == NULL)) > return; > > + ret = pm_runtime_resume_and_get(sdev->dev); > + if (ret) > + return; > + > /* Enable clocks before accessing the hardware. */ > ret = shmob_drm_clk_on(sdev); This would be best located in the runtime PM resume handler. Same for disabling clocks in the runtime PM suspend handler. > - if (ret < 0) > + if (ret < 0) { > + pm_runtime_put(sdev->dev); > return; > + } > > /* Reset and enable the LCDC. */ > lcdc_write(sdev, LDCNT2R, lcdc_read(sdev, LDCNT2R) | LDCNT2R_BR); > @@ -271,6 +278,8 @@ static void shmob_drm_crtc_stop(struct shmob_drm_crtc *scrtc) > /* Stop clocks. */ > shmob_drm_clk_off(sdev); > > + pm_runtime_put(sdev->dev); > + > scrtc->started = false; > } > > diff --git a/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c > index 30493ce874192e3e..4f01caa119637032 100644 > --- a/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c > +++ b/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c > @@ -13,6 +13,7 @@ > #include <linux/module.h> > #include <linux/platform_device.h> > #include <linux/pm.h> > +#include <linux/pm_runtime.h> > #include <linux/slab.h> > > #include <drm/drm_drv.h> > @@ -216,6 +217,10 @@ static int shmob_drm_probe(struct platform_device *pdev) > if (IS_ERR(sdev->mmio)) > return PTR_ERR(sdev->mmio); > > + ret = devm_pm_runtime_enable(&pdev->dev); > + if (ret) > + return ret; > + I would move this after shmob_drm_setup_clocks(), to ensure that the runtime PM suspend and resume handlers will have access to clocks. > ret = shmob_drm_setup_clocks(sdev, pdata->clk_source); > if (ret < 0) > return ret;
On Fri, Jun 23, 2023 at 06:07:44PM +0300, Laurent Pinchart wrote: > Hi Geert, > > Thank you for the patch. > > On Thu, Jun 22, 2023 at 11:21:18AM +0200, Geert Uytterhoeven wrote: > > The SH-Mobile LCD Controller is part of a PM Domain on all relevant SoCs > > (clock domain on all, power domain on some). Hence it may not be > > sufficient to manage the LCDC module clock explicitly (e.g. if the > > selected clock source differs from SHMOB_DRM_CLK_BUS). > > > > Fix this by using Runtime PM instead. > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > --- > > drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c | 11 ++++++++++- > > drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c | 5 +++++ > > 2 files changed, 15 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > > index fbfd906844da490c..84dbf35025d7be63 100644 > > --- a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > > +++ b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > > @@ -9,6 +9,7 @@ > > > > #include <linux/backlight.h> > > #include <linux/clk.h> > > +#include <linux/pm_runtime.h> > > > > #include <drm/drm_crtc.h> > > #include <drm/drm_crtc_helper.h> > > @@ -170,10 +171,16 @@ static void shmob_drm_crtc_start(struct shmob_drm_crtc *scrtc) > > if (WARN_ON(format == NULL)) > > return; > > > > + ret = pm_runtime_resume_and_get(sdev->dev); > > + if (ret) > > + return; > > + > > /* Enable clocks before accessing the hardware. */ > > ret = shmob_drm_clk_on(sdev); > > This would be best located in the runtime PM resume handler. Same for > disabling clocks in the runtime PM suspend handler. The driver should then depend on CONFIG_PM. There's no indirect dependency through CONFIG_DRM as far as I can tell, but there's one through ARCH_SHMOBILE. This then got me puzzled, as ARCH_SHMOBILE is defined in arch/sh/Kconfig, and this driver depends on ARM. Am I missing something ? > > - if (ret < 0) > > + if (ret < 0) { > > + pm_runtime_put(sdev->dev); > > return; > > + } > > > > /* Reset and enable the LCDC. */ > > lcdc_write(sdev, LDCNT2R, lcdc_read(sdev, LDCNT2R) | LDCNT2R_BR); > > @@ -271,6 +278,8 @@ static void shmob_drm_crtc_stop(struct shmob_drm_crtc *scrtc) > > /* Stop clocks. */ > > shmob_drm_clk_off(sdev); > > > > + pm_runtime_put(sdev->dev); > > + > > scrtc->started = false; > > } > > > > diff --git a/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c > > index 30493ce874192e3e..4f01caa119637032 100644 > > --- a/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c > > +++ b/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c > > @@ -13,6 +13,7 @@ > > #include <linux/module.h> > > #include <linux/platform_device.h> > > #include <linux/pm.h> > > +#include <linux/pm_runtime.h> > > #include <linux/slab.h> > > > > #include <drm/drm_drv.h> > > @@ -216,6 +217,10 @@ static int shmob_drm_probe(struct platform_device *pdev) > > if (IS_ERR(sdev->mmio)) > > return PTR_ERR(sdev->mmio); > > > > + ret = devm_pm_runtime_enable(&pdev->dev); > > + if (ret) > > + return ret; > > + > > I would move this after shmob_drm_setup_clocks(), to ensure that the > runtime PM suspend and resume handlers will have access to clocks. > > > ret = shmob_drm_setup_clocks(sdev, pdata->clk_source); > > if (ret < 0) > > return ret;
Hi Laurent, On Fri, Jun 23, 2023 at 5:11 PM Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > On Fri, Jun 23, 2023 at 06:07:44PM +0300, Laurent Pinchart wrote: > > On Thu, Jun 22, 2023 at 11:21:18AM +0200, Geert Uytterhoeven wrote: > > > The SH-Mobile LCD Controller is part of a PM Domain on all relevant SoCs > > > (clock domain on all, power domain on some). Hence it may not be > > > sufficient to manage the LCDC module clock explicitly (e.g. if the > > > selected clock source differs from SHMOB_DRM_CLK_BUS). > > > > > > Fix this by using Runtime PM instead. > > > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > --- > > > drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c | 11 ++++++++++- > > > drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c | 5 +++++ > > > 2 files changed, 15 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > > > index fbfd906844da490c..84dbf35025d7be63 100644 > > > --- a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > > > +++ b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > > > @@ -9,6 +9,7 @@ > > > > > > #include <linux/backlight.h> > > > #include <linux/clk.h> > > > +#include <linux/pm_runtime.h> > > > > > > #include <drm/drm_crtc.h> > > > #include <drm/drm_crtc_helper.h> > > > @@ -170,10 +171,16 @@ static void shmob_drm_crtc_start(struct shmob_drm_crtc *scrtc) > > > if (WARN_ON(format == NULL)) > > > return; > > > > > > + ret = pm_runtime_resume_and_get(sdev->dev); > > > + if (ret) > > > + return; > > > + > > > /* Enable clocks before accessing the hardware. */ > > > ret = shmob_drm_clk_on(sdev); > > > > This would be best located in the runtime PM resume handler. Same for > > disabling clocks in the runtime PM suspend handler. > > The driver should then depend on CONFIG_PM. There's no indirect > dependency through CONFIG_DRM as far as I can tell, but there's one > through ARCH_SHMOBILE. This then got me puzzled, as ARCH_SHMOBILE is > defined in arch/sh/Kconfig, and this driver depends on ARM. Am I missing > something ? Vommit 4bd65789ba847f39 ("drm: shmobile: Make DRM_SHMOBILE visible on Renesas SoC platforms") in drm-next: - depends on DRM && ARM - depends on ARCH_SHMOBILE || COMPILE_TEST + depends on DRM + depends on ARCH_RENESAS || ARCH_SHMOBILE || COMPILE_TEST Gr{oetje,eeting}s, Geert
On Fri, Jun 23, 2023 at 05:22:45PM +0200, Geert Uytterhoeven wrote: > On Fri, Jun 23, 2023 at 5:11 PM Laurent Pinchart wrote: > > On Fri, Jun 23, 2023 at 06:07:44PM +0300, Laurent Pinchart wrote: > > > On Thu, Jun 22, 2023 at 11:21:18AM +0200, Geert Uytterhoeven wrote: > > > > The SH-Mobile LCD Controller is part of a PM Domain on all relevant SoCs > > > > (clock domain on all, power domain on some). Hence it may not be > > > > sufficient to manage the LCDC module clock explicitly (e.g. if the > > > > selected clock source differs from SHMOB_DRM_CLK_BUS). > > > > > > > > Fix this by using Runtime PM instead. > > > > > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > > --- > > > > drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c | 11 ++++++++++- > > > > drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c | 5 +++++ > > > > 2 files changed, 15 insertions(+), 1 deletion(-) > > > > > > > > diff --git a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > > > > index fbfd906844da490c..84dbf35025d7be63 100644 > > > > --- a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > > > > +++ b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > > > > @@ -9,6 +9,7 @@ > > > > > > > > #include <linux/backlight.h> > > > > #include <linux/clk.h> > > > > +#include <linux/pm_runtime.h> > > > > > > > > #include <drm/drm_crtc.h> > > > > #include <drm/drm_crtc_helper.h> > > > > @@ -170,10 +171,16 @@ static void shmob_drm_crtc_start(struct shmob_drm_crtc *scrtc) > > > > if (WARN_ON(format == NULL)) > > > > return; > > > > > > > > + ret = pm_runtime_resume_and_get(sdev->dev); > > > > + if (ret) > > > > + return; > > > > + > > > > /* Enable clocks before accessing the hardware. */ > > > > ret = shmob_drm_clk_on(sdev); > > > > > > This would be best located in the runtime PM resume handler. Same for > > > disabling clocks in the runtime PM suspend handler. > > > > The driver should then depend on CONFIG_PM. There's no indirect > > dependency through CONFIG_DRM as far as I can tell, but there's one > > through ARCH_SHMOBILE. This then got me puzzled, as ARCH_SHMOBILE is > > defined in arch/sh/Kconfig, and this driver depends on ARM. Am I missing > > something ? > > Vommit 4bd65789ba847f39 ("drm: shmobile: Make DRM_SHMOBILE visible on > Renesas SoC platforms") in drm-next: > > - depends on DRM && ARM > - depends on ARCH_SHMOBILE || COMPILE_TEST > + depends on DRM > + depends on ARCH_RENESAS || ARCH_SHMOBILE || COMPILE_TEST That's better indeed :-) A dependency on CONFIG_PM is still needed as ARCH_RENESAS doesn't depend on it.
Hi Laurent, On Fri, Jun 23, 2023 at 5:34 PM Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > On Fri, Jun 23, 2023 at 05:22:45PM +0200, Geert Uytterhoeven wrote: > > On Fri, Jun 23, 2023 at 5:11 PM Laurent Pinchart wrote: > > > On Fri, Jun 23, 2023 at 06:07:44PM +0300, Laurent Pinchart wrote: > > > > On Thu, Jun 22, 2023 at 11:21:18AM +0200, Geert Uytterhoeven wrote: > > > > > The SH-Mobile LCD Controller is part of a PM Domain on all relevant SoCs > > > > > (clock domain on all, power domain on some). Hence it may not be > > > > > sufficient to manage the LCDC module clock explicitly (e.g. if the > > > > > selected clock source differs from SHMOB_DRM_CLK_BUS). > > > > > > > > > > Fix this by using Runtime PM instead. > > > > > > > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > > > --- > > > > > drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c | 11 ++++++++++- > > > > > drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c | 5 +++++ > > > > > 2 files changed, 15 insertions(+), 1 deletion(-) > > > > > > > > > > diff --git a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > > > > > index fbfd906844da490c..84dbf35025d7be63 100644 > > > > > --- a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > > > > > +++ b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > > > > > @@ -9,6 +9,7 @@ > > > > > > > > > > #include <linux/backlight.h> > > > > > #include <linux/clk.h> > > > > > +#include <linux/pm_runtime.h> > > > > > > > > > > #include <drm/drm_crtc.h> > > > > > #include <drm/drm_crtc_helper.h> > > > > > @@ -170,10 +171,16 @@ static void shmob_drm_crtc_start(struct shmob_drm_crtc *scrtc) > > > > > if (WARN_ON(format == NULL)) > > > > > return; > > > > > > > > > > + ret = pm_runtime_resume_and_get(sdev->dev); > > > > > + if (ret) > > > > > + return; > > > > > + > > > > > /* Enable clocks before accessing the hardware. */ > > > > > ret = shmob_drm_clk_on(sdev); > > > > > > > > This would be best located in the runtime PM resume handler. Same for > > > > disabling clocks in the runtime PM suspend handler. > > > > > > The driver should then depend on CONFIG_PM. There's no indirect > > > dependency through CONFIG_DRM as far as I can tell, but there's one > > > through ARCH_SHMOBILE. This then got me puzzled, as ARCH_SHMOBILE is > > > defined in arch/sh/Kconfig, and this driver depends on ARM. Am I missing > > > something ? > > > > Vommit 4bd65789ba847f39 ("drm: shmobile: Make DRM_SHMOBILE visible on > > Renesas SoC platforms") in drm-next: > > > > - depends on DRM && ARM > > - depends on ARCH_SHMOBILE || COMPILE_TEST > > + depends on DRM > > + depends on ARCH_RENESAS || ARCH_SHMOBILE || COMPILE_TEST > > That's better indeed :-) > > A dependency on CONFIG_PM is still needed as ARCH_RENESAS doesn't depend > on it. ARCH_RMOBILE selects PM, so PM will be enabled on affected platforms. Gr{oetje,eeting}s, Geert
Hi Geert, On Fri, Jun 23, 2023 at 07:41:36PM +0200, Geert Uytterhoeven wrote: > On Fri, Jun 23, 2023 at 5:34 PM Laurent Pinchart wrote: > > On Fri, Jun 23, 2023 at 05:22:45PM +0200, Geert Uytterhoeven wrote: > > > On Fri, Jun 23, 2023 at 5:11 PM Laurent Pinchart wrote: > > > > On Fri, Jun 23, 2023 at 06:07:44PM +0300, Laurent Pinchart wrote: > > > > > On Thu, Jun 22, 2023 at 11:21:18AM +0200, Geert Uytterhoeven wrote: > > > > > > The SH-Mobile LCD Controller is part of a PM Domain on all relevant SoCs > > > > > > (clock domain on all, power domain on some). Hence it may not be > > > > > > sufficient to manage the LCDC module clock explicitly (e.g. if the > > > > > > selected clock source differs from SHMOB_DRM_CLK_BUS). > > > > > > > > > > > > Fix this by using Runtime PM instead. > > > > > > > > > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > > > > --- > > > > > > drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c | 11 ++++++++++- > > > > > > drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c | 5 +++++ > > > > > > 2 files changed, 15 insertions(+), 1 deletion(-) > > > > > > > > > > > > diff --git a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > > > > > > index fbfd906844da490c..84dbf35025d7be63 100644 > > > > > > --- a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > > > > > > +++ b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c > > > > > > @@ -9,6 +9,7 @@ > > > > > > > > > > > > #include <linux/backlight.h> > > > > > > #include <linux/clk.h> > > > > > > +#include <linux/pm_runtime.h> > > > > > > > > > > > > #include <drm/drm_crtc.h> > > > > > > #include <drm/drm_crtc_helper.h> > > > > > > @@ -170,10 +171,16 @@ static void shmob_drm_crtc_start(struct shmob_drm_crtc *scrtc) > > > > > > if (WARN_ON(format == NULL)) > > > > > > return; > > > > > > > > > > > > + ret = pm_runtime_resume_and_get(sdev->dev); > > > > > > + if (ret) > > > > > > + return; > > > > > > + > > > > > > /* Enable clocks before accessing the hardware. */ > > > > > > ret = shmob_drm_clk_on(sdev); > > > > > > > > > > This would be best located in the runtime PM resume handler. Same for > > > > > disabling clocks in the runtime PM suspend handler. > > > > > > > > The driver should then depend on CONFIG_PM. There's no indirect > > > > dependency through CONFIG_DRM as far as I can tell, but there's one > > > > through ARCH_SHMOBILE. This then got me puzzled, as ARCH_SHMOBILE is > > > > defined in arch/sh/Kconfig, and this driver depends on ARM. Am I missing > > > > something ? > > > > > > Vommit 4bd65789ba847f39 ("drm: shmobile: Make DRM_SHMOBILE visible on > > > Renesas SoC platforms") in drm-next: > > > > > > - depends on DRM && ARM > > > - depends on ARCH_SHMOBILE || COMPILE_TEST > > > + depends on DRM > > > + depends on ARCH_RENESAS || ARCH_SHMOBILE || COMPILE_TEST > > > > That's better indeed :-) > > > > A dependency on CONFIG_PM is still needed as ARCH_RENESAS doesn't depend > > on it. > > ARCH_RMOBILE selects PM, so PM will be enabled on affected platforms. Which also means that you will never test compilation without CONFIG_PM, while bots will. There's a risk of introducing compilation warnings.
diff --git a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c index fbfd906844da490c..84dbf35025d7be63 100644 --- a/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c +++ b/drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c @@ -9,6 +9,7 @@ #include <linux/backlight.h> #include <linux/clk.h> +#include <linux/pm_runtime.h> #include <drm/drm_crtc.h> #include <drm/drm_crtc_helper.h> @@ -170,10 +171,16 @@ static void shmob_drm_crtc_start(struct shmob_drm_crtc *scrtc) if (WARN_ON(format == NULL)) return; + ret = pm_runtime_resume_and_get(sdev->dev); + if (ret) + return; + /* Enable clocks before accessing the hardware. */ ret = shmob_drm_clk_on(sdev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put(sdev->dev); return; + } /* Reset and enable the LCDC. */ lcdc_write(sdev, LDCNT2R, lcdc_read(sdev, LDCNT2R) | LDCNT2R_BR); @@ -271,6 +278,8 @@ static void shmob_drm_crtc_stop(struct shmob_drm_crtc *scrtc) /* Stop clocks. */ shmob_drm_clk_off(sdev); + pm_runtime_put(sdev->dev); + scrtc->started = false; } diff --git a/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c b/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c index 30493ce874192e3e..4f01caa119637032 100644 --- a/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c +++ b/drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/pm.h> +#include <linux/pm_runtime.h> #include <linux/slab.h> #include <drm/drm_drv.h> @@ -216,6 +217,10 @@ static int shmob_drm_probe(struct platform_device *pdev) if (IS_ERR(sdev->mmio)) return PTR_ERR(sdev->mmio); + ret = devm_pm_runtime_enable(&pdev->dev); + if (ret) + return ret; + ret = shmob_drm_setup_clocks(sdev, pdata->clk_source); if (ret < 0) return ret;
The SH-Mobile LCD Controller is part of a PM Domain on all relevant SoCs (clock domain on all, power domain on some). Hence it may not be sufficient to manage the LCDC module clock explicitly (e.g. if the selected clock source differs from SHMOB_DRM_CLK_BUS). Fix this by using Runtime PM instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- drivers/gpu/drm/renesas/shmobile/shmob_drm_crtc.c | 11 ++++++++++- drivers/gpu/drm/renesas/shmobile/shmob_drm_drv.c | 5 +++++ 2 files changed, 15 insertions(+), 1 deletion(-)