| Message ID | 20230628145412.1610260-2-jstephan@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Mediatek ISP3.0 | expand |
On Wed, 28 Jun 2023 16:52:52 +0200, Julien Stephan wrote: > From: Louis Kuo <louis.kuo@mediatek.com> > > This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in > some Mediatek SoC, such as the mt8365 > > Signed-off-by: Louis Kuo <louis.kuo@mediatek.com> > Signed-off-by: Phi-Bang Nguyen <pnguyen@baylibre.com> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Signed-off-by: Julien Stephan <jstephan@baylibre.com> > --- > .../media/mediatek,mt8365-seninf.yaml | 299 ++++++++++++++++++ > MAINTAINERS | 7 + > 2 files changed, 306 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml: properties:ports:properties:port@8:patternProperties: 'endpoint' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/core.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml: properties:ports:properties:port@4:patternProperties: 'endpoint' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/core.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml: properties:ports:properties:port@6:patternProperties: 'endpoint' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/core.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml: properties:ports:properties:port@9:patternProperties: 'endpoint' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/core.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml: properties:ports:properties:port@0:patternProperties: 'endpoint' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/core.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml: properties:ports:properties:port@2:patternProperties: 'endpoint' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/core.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml: properties:ports:properties:port@3:patternProperties: 'endpoint' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/core.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml: properties:ports:properties:port@5:patternProperties: 'endpoint' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/core.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml: properties:ports:properties:port@7:patternProperties: 'endpoint' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/core.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml: properties:ports:properties:port@1:patternProperties: 'endpoint' does not match '[\\^$()*@]' hint: Fixed strings belong in 'properties', not 'patternProperties' from schema $id: http://devicetree.org/meta-schemas/core.yaml# Documentation/devicetree/bindings/clock/milbeaut-clock.example.dtb: /example-2/serial@1e700010: failed to match any schema with compatible: ['socionext,milbeaut-usio-uart'] Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.example.dtb: /example-1/syscon@20e00000: failed to match any schema with compatible: ['sprd,sc9863a-glbregs', 'syscon', 'simple-mfd'] Documentation/devicetree/bindings/leds/common.example.dtb: /example-2/i2c/led-controller@30: failed to match any schema with compatible: ['panasonic,an30259a'] Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/cpu: failed to match any schema with compatible: ['cpu-driver'] Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/codec: failed to match any schema with compatible: ['codec-driver'] Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@7d5d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd'] Documentation/devicetree/bindings/thermal/imx-thermal.example.dtb: /example-0/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6q-anatop', 'syscon', 'simple-mfd'] Documentation/devicetree/bindings/i2c/qcom,i2c-cci.example.dtb: /example-0/cci@ac4a000/i2c-bus@1/camera@60: failed to match any schema with compatible: ['ovti,ov7251'] Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic'] Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic'] Documentation/devicetree/bindings/input/mediatek,pmic-keys.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['mediatek,mt6397'] Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.example.dtb: /example-0/pmic@0: failed to match any schema with compatible: ['sprd,sc2731'] Documentation/devicetree/bindings/dma/dma-controller.example.dtb: /example-0/dma-controller@48000000: failed to match any schema with compatible: ['ti,omap-sdma'] Documentation/devicetree/bindings/dma/dma-router.example.dtb: /example-0/dma-router@4a002b78: failed to match any schema with compatible: ['ti,dra7-dma-crossbar'] Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.example.dtb: /example-0/memory-controller@13410000/ethernet@6: failed to match any schema with compatible: ['davicom,dm9000'] Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.example.dtb: /example-0/cpuctrl@a22000/clock@0: failed to match any schema with compatible: ['hisilicon,hix5hd2-clock'] Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.example.dtb: /example-0/system-controller@802000/clock@0: failed to match any schema with compatible: ['hisilicon,hi3620-clock'] Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.example.dtb: /example-0/peripheral-controller@8a20000/phy@850: failed to match any schema with compatible: ['hisilicon,hi3798cv200-combphy'] Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.example.dts:28:18: fatal error: dt-bindings/power/mediatek,mt8365-power.h: No such file or directory 28 | #include <dt-bindings/power/mediatek,mt8365-power.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. make[1]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.example.dtb] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1512: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230628145412.1610260-2-jstephan@baylibre.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Wed, Jun 28, 2023 at 04:52:52PM +0200, Julien Stephan wrote: > From: Louis Kuo <louis.kuo@mediatek.com> > > This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in > some Mediatek SoC, such as the mt8365 > > Signed-off-by: Louis Kuo <louis.kuo@mediatek.com> > Signed-off-by: Phi-Bang Nguyen <pnguyen@baylibre.com> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Signed-off-by: Julien Stephan <jstephan@baylibre.com> > --- > .../media/mediatek,mt8365-seninf.yaml | 299 ++++++++++++++++++ > MAINTAINERS | 7 + > 2 files changed, 306 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml > > diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml > new file mode 100644 > index 000000000000..a54f785bb252 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml > @@ -0,0 +1,299 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (c) 2023 MediaTek, BayLibre > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/mediatek,mt8365-seninf.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek Sensor Interface 3.0 > + > +maintainers: > + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> > + - Julien Stephan <jstephan@baylibre.com> > + - Andy Hsieh <andy.hsieh@mediatek.com> > + > +description: > + The ISP3.0 SENINF is the CSI-2 and parallel camera sensor interface found in > + multiple MediaTek SoCs. It can support up to three physical CSI-2 > + input ports, configured in DPHY (2 or 4 data lanes) or CPHY depending on the soc. > + On the output side, SENINF can be connected either to CAMSV instance or > + to the internal ISP. CAMSV is used to bypass the internal ISP processing > + in order to connect either an external ISP, or a sensor (RAW, YUV). > + > +properties: > + compatible: > + const: mediatek,mt8365-seninf > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + > + clocks: > + items: > + - description: Seninf camsys clock > + - description: Seninf top mux clock > + > + clock-names: > + items: > + - const: cam_seninf _seninf is redundant as that is the block name. 'camsys' perhaps based on the description. > + - const: top_mux_seninf top_mux > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: CSI0 or CSI0A port > + > + properties: > + phys: > + maxItems: 1 > + description: phandle to the PHY connected to CSI0/CSI0A 'port' nodes shouldn't have properties. This goes in the top level. > + > + patternProperties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + port@1: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: CSI1 port > + > + properties: > + phys: > + maxItems: 1 > + description: phandle to the PHY connected to CSI1 > + > + patternProperties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + port@2: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: CSI2 port > + > + properties: > + phys: > + maxItems: 1 > + description: phandle to the PHY connected to CSI2 > + > + patternProperties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + port@3: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: CSI0B port > + > + properties: > + phys: > + maxItems: 1 > + description: phandle to the PHY connected to CSI0B > + > + patternProperties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + clock-lanes: > + maxItems: 1 > + data-lanes: > + minItems: 1 > + maxItems: 2 > + > + port@4: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: connection point for cam0 > + > + patternProperties: > + endpoint: > + $ref: video-interfaces.yaml# Are you using any properties from here? If not, you just need to reference graph.yaml#/properties/port. > + unevaluatedProperties: false > + > + port@5: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: connection point for cam1 > + > + patternProperties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + port@6: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: connection point for camsv0 > + > + patternProperties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + port@7: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: connection point for camsv1 > + > + patternProperties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + port@8: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: connection point for camsv2 > + > + patternProperties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + port@9: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: connection point for camsv3 > + > + patternProperties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + required: > + - port@0 > + - port@1 > + - port@2 > + - port@3 > + - port@4 > + - port@5 > + - port@6 > + - port@7 > + - port@8 > + - port@9 > + > +required: > + - compatible > + - interrupts > + - clocks > + - clock-names > + - power-domains > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/mediatek,mt8365-clk.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/phy/phy.h> > + #include <dt-bindings/power/mediatek,mt8365-power.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + seninf: seninf@15040000 { > + compatible = "mediatek,mt8365-seninf"; > + reg = <0 0x15040000 0 0x6000>; > + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&camsys CLK_CAM_SENIF>, > + <&topckgen CLK_TOP_SENIF_SEL>; > + clock-names = "cam_seninf", "top_mux_seninf"; > + > + power-domains = <&spm MT8365_POWER_DOMAIN_CAM>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + phys = <&mipi_csi0 PHY_TYPE_DPHY>; > + seninf_in1: endpoint { > + clock-lanes = <2>; > + data-lanes = <1 3 0 4>; > + remote-endpoint = <&isp1_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + }; > + > + port@2 { > + reg = <2>; > + }; > + > + port@3 { > + reg = <3>; > + }; > + > + port@4 { > + reg = <4>; > + seninf_camsv1_endpoint: endpoint { > + remote-endpoint = <&camsv1_endpoint>; > + }; > + }; > + > + port@5 { > + reg = <5>; > + }; > + > + port@6 { > + reg = <6>; > + }; > + > + port@7 { > + reg = <7>; > + }; > + > + port@8 { > + reg = <8>; > + }; > + > + port@9 { > + reg = <9>; > + }; > + > + }; > + }; > + }; > + > +... > diff --git a/MAINTAINERS b/MAINTAINERS > index e505023ffda1..1248a915a72f 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -13256,6 +13256,13 @@ M: Sean Wang <sean.wang@mediatek.com> > S: Maintained > F: drivers/char/hw_random/mtk-rng.c > > +MEDIATEK ISP3.0 DRIVER > +M: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > +M: Julien Stephan <jstephan@baylibre.com> > +M: Andy Hsieh <andy.hsieh@mediatek.com> > +S: Supported > +F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml > + > MEDIATEK SMI DRIVER > M: Yong Wu <yong.wu@mediatek.com> > L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) > -- > 2.41.0 >
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml new file mode 100644 index 000000000000..a54f785bb252 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml @@ -0,0 +1,299 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 MediaTek, BayLibre +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mt8365-seninf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Sensor Interface 3.0 + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + - Julien Stephan <jstephan@baylibre.com> + - Andy Hsieh <andy.hsieh@mediatek.com> + +description: + The ISP3.0 SENINF is the CSI-2 and parallel camera sensor interface found in + multiple MediaTek SoCs. It can support up to three physical CSI-2 + input ports, configured in DPHY (2 or 4 data lanes) or CPHY depending on the soc. + On the output side, SENINF can be connected either to CAMSV instance or + to the internal ISP. CAMSV is used to bypass the internal ISP processing + in order to connect either an external ISP, or a sensor (RAW, YUV). + +properties: + compatible: + const: mediatek,mt8365-seninf + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Seninf camsys clock + - description: Seninf top mux clock + + clock-names: + items: + - const: cam_seninf + - const: top_mux_seninf + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI0 or CSI0A port + + properties: + phys: + maxItems: 1 + description: phandle to the PHY connected to CSI0/CSI0A + + patternProperties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + data-lanes: + minItems: 1 + maxItems: 4 + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI1 port + + properties: + phys: + maxItems: 1 + description: phandle to the PHY connected to CSI1 + + patternProperties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + data-lanes: + minItems: 1 + maxItems: 4 + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI2 port + + properties: + phys: + maxItems: 1 + description: phandle to the PHY connected to CSI2 + + patternProperties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + data-lanes: + minItems: 1 + maxItems: 4 + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI0B port + + properties: + phys: + maxItems: 1 + description: phandle to the PHY connected to CSI0B + + patternProperties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + data-lanes: + minItems: 1 + maxItems: 2 + + port@4: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: connection point for cam0 + + patternProperties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + port@5: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: connection point for cam1 + + patternProperties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + port@6: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: connection point for camsv0 + + patternProperties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + port@7: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: connection point for camsv1 + + patternProperties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + port@8: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: connection point for camsv2 + + patternProperties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + port@9: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: connection point for camsv3 + + patternProperties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + required: + - port@0 + - port@1 + - port@2 + - port@3 + - port@4 + - port@5 + - port@6 + - port@7 + - port@8 + - port@9 + +required: + - compatible + - interrupts + - clocks + - clock-names + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mediatek,mt8365-clk.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/phy/phy.h> + #include <dt-bindings/power/mediatek,mt8365-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + seninf: seninf@15040000 { + compatible = "mediatek,mt8365-seninf"; + reg = <0 0x15040000 0 0x6000>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>; + clocks = <&camsys CLK_CAM_SENIF>, + <&topckgen CLK_TOP_SENIF_SEL>; + clock-names = "cam_seninf", "top_mux_seninf"; + + power-domains = <&spm MT8365_POWER_DOMAIN_CAM>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phys = <&mipi_csi0 PHY_TYPE_DPHY>; + seninf_in1: endpoint { + clock-lanes = <2>; + data-lanes = <1 3 0 4>; + remote-endpoint = <&isp1_out>; + }; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + seninf_camsv1_endpoint: endpoint { + remote-endpoint = <&camsv1_endpoint>; + }; + }; + + port@5 { + reg = <5>; + }; + + port@6 { + reg = <6>; + }; + + port@7 { + reg = <7>; + }; + + port@8 { + reg = <8>; + }; + + port@9 { + reg = <9>; + }; + + }; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index e505023ffda1..1248a915a72f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13256,6 +13256,13 @@ M: Sean Wang <sean.wang@mediatek.com> S: Maintained F: drivers/char/hw_random/mtk-rng.c +MEDIATEK ISP3.0 DRIVER +M: Laurent Pinchart <laurent.pinchart@ideasonboard.com> +M: Julien Stephan <jstephan@baylibre.com> +M: Andy Hsieh <andy.hsieh@mediatek.com> +S: Supported +F: Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml + MEDIATEK SMI DRIVER M: Yong Wu <yong.wu@mediatek.com> L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)