diff mbox series

[1/3] ASoC: dt-bindings: q6apm: add firmware-name bindings

Message ID 20230628102621.15016-2-srinivas.kandagatla@linaro.org (mailing list archive)
State New, archived
Headers show
Series ASoC: qcom: get tplg firmware-name from device tree | expand

Commit Message

Srinivas Kandagatla June 28, 2023, 10:26 a.m. UTC
Add bindings to get firmare-name from DT, this will provide more flexibility
to specify platform specific firmware file name and location. Also this brings
tplg firmware name inline with other board specific firmware locations.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 Documentation/devicetree/bindings/sound/qcom,q6apm.yaml | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Rob Herring June 28, 2023, 11:18 a.m. UTC | #1
On Wed, 28 Jun 2023 11:26:19 +0100, Srinivas Kandagatla wrote:
> Add bindings to get firmare-name from DT, this will provide more flexibility
> to specify platform specific firmware file name and location. Also this brings
> tplg firmware name inline with other board specific firmware locations.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  Documentation/devicetree/bindings/sound/qcom,q6apm.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/clock/milbeaut-clock.example.dtb: /example-2/serial@1e700010: failed to match any schema with compatible: ['socionext,milbeaut-usio-uart']
Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.example.dtb: /example-1/syscon@20e00000: failed to match any schema with compatible: ['sprd,sc9863a-glbregs', 'syscon', 'simple-mfd']
Documentation/devicetree/bindings/leds/common.example.dtb: /example-2/i2c/led-controller@30: failed to match any schema with compatible: ['panasonic,an30259a']
Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/cpu: failed to match any schema with compatible: ['cpu-driver']
Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/codec: failed to match any schema with compatible: ['codec-driver']
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/sound/qcom,q6apm.example.dtb: service@1: 'firmware-name' is a required property
	from schema $id: http://devicetree.org/schemas/sound/qcom,q6apm.yaml#
Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@7d5d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd']
Documentation/devicetree/bindings/thermal/imx-thermal.example.dtb: /example-0/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6q-anatop', 'syscon', 'simple-mfd']
Documentation/devicetree/bindings/i2c/qcom,i2c-cci.example.dtb: /example-0/cci@ac4a000/i2c-bus@1/camera@60: failed to match any schema with compatible: ['ovti,ov7251']
Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic']
Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic']
Documentation/devicetree/bindings/input/mediatek,pmic-keys.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['mediatek,mt6397']
Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.example.dtb: /example-0/pmic@0: failed to match any schema with compatible: ['sprd,sc2731']
Documentation/devicetree/bindings/dma/dma-controller.example.dtb: /example-0/dma-controller@48000000: failed to match any schema with compatible: ['ti,omap-sdma']
Documentation/devicetree/bindings/dma/dma-router.example.dtb: /example-0/dma-router@4a002b78: failed to match any schema with compatible: ['ti,dra7-dma-crossbar']
Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.example.dtb: /example-0/memory-controller@13410000/ethernet@6: failed to match any schema with compatible: ['davicom,dm9000']
Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.example.dtb: /example-0/cpuctrl@a22000/clock@0: failed to match any schema with compatible: ['hisilicon,hix5hd2-clock']
Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.example.dtb: /example-0/peripheral-controller@8a20000/phy@850: failed to match any schema with compatible: ['hisilicon,hi3798cv200-combphy']
Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.example.dtb: /example-0/system-controller@802000/clock@0: failed to match any schema with compatible: ['hisilicon,hi3620-clock']
Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: /example-0/parent/i2c/camera@36: failed to match any schema with compatible: ['ovti,ov5695']
Documentation/devicetree/bindings/net/marvell,mvusb.example.dtb: /example-0/usb/mdio@1/switch@0: failed to match any schema with compatible: ['marvell,mv88e6190']
Documentation/devicetree/bindings/net/qca,ar71xx.example.dtb: /example-0/ethernet@1a000000/mdio/switch@10: failed to match any schema with compatible: ['qca,ar9331-switch']
Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.example.dtb: /example-0/iomcu@ffd7e000: failed to match any schema with compatible: ['hisilicon,hi3660-iomcu', 'syscon']
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,apr.example.dtb: service@1: 'firmware-name' is a required property
	from schema $id: http://devicetree.org/schemas/sound/qcom,q6apm.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230628102621.15016-2-srinivas.kandagatla@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Rob Herring June 28, 2023, 3:54 p.m. UTC | #2
On Wed, Jun 28, 2023 at 11:26:19AM +0100, Srinivas Kandagatla wrote:
> Add bindings to get firmare-name from DT, this will provide more flexibility
> to specify platform specific firmware file name and location. Also this brings
> tplg firmware name inline with other board specific firmware locations.

tplg?

> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  Documentation/devicetree/bindings/sound/qcom,q6apm.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml
> index ef1965aca254..c783451145ef 100644
> --- a/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml
> +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml
> @@ -31,6 +31,10 @@ properties:
>      unevaluatedProperties: false
>      description: Qualcomm DSP audio ports
>  
> +  firmware-name:
> +    $ref: /schemas/types.yaml#/definitions/string

Already has a type, so you can drop.

No default? Or pattern it should match? 

> +    description: Audio Topology Firmware name
> +
>    '#sound-dai-cells':
>      const: 0
>  
> @@ -38,6 +42,7 @@ required:
>    - compatible
>    - bedais
>    - dais
> +  - firmware-name

Causes warnings. Test you bindings.

>  
>  unevaluatedProperties: false
>  
> -- 
> 2.21.0
>
Srinivas Kandagatla June 28, 2023, 4:43 p.m. UTC | #3
On 28/06/2023 16:54, Rob Herring wrote:
> On Wed, Jun 28, 2023 at 11:26:19AM +0100, Srinivas Kandagatla wrote:
>> Add bindings to get firmare-name from DT, this will provide more flexibility
>> to specify platform specific firmware file name and location. Also this brings
>> tplg firmware name inline with other board specific firmware locations.
> 
> tplg?
Topology, will update this in next version.

> 
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> ---
>>   Documentation/devicetree/bindings/sound/qcom,q6apm.yaml | 5 +++++
>>   1 file changed, 5 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml
>> index ef1965aca254..c783451145ef 100644
>> --- a/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml
>> +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml
>> @@ -31,6 +31,10 @@ properties:
>>       unevaluatedProperties: false
>>       description: Qualcomm DSP audio ports
>>   
>> +  firmware-name:
>> +    $ref: /schemas/types.yaml#/definitions/string
> 
> Already has a type, so you can drop.
thankyou removed this now, but all the existing yaml still have this.

> 
> No default? Or pattern it should match?

no, its going to be hard to come up with a pattern to match file name or 
path for firmware.

> 
>> +    description: Audio Topology Firmware name
>> +
>>     '#sound-dai-cells':
>>       const: 0
>>   
>> @@ -38,6 +42,7 @@ required:
>>     - compatible
>>     - bedais
>>     - dais
>> +  - firmware-name
> 
> Causes warnings. Test you bindings.

yes, examples need updating, will do that in next spin.

--srini
> 
>>   
>>   unevaluatedProperties: false
>>   
>> -- 
>> 2.21.0
>>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml
index ef1965aca254..c783451145ef 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml
@@ -31,6 +31,10 @@  properties:
     unevaluatedProperties: false
     description: Qualcomm DSP audio ports
 
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Audio Topology Firmware name
+
   '#sound-dai-cells':
     const: 0
 
@@ -38,6 +42,7 @@  required:
   - compatible
   - bedais
   - dais
+  - firmware-name
 
 unevaluatedProperties: false