| Message ID | 1687955688-20809-5-git-send-email-quic_mojha@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4,01/21] docs: qcom: Add qualcomm minidump guide | expand |
On Wed, Jun 28, 2023 at 3:35 PM Mukesh Ojha <quic_mojha@quicinc.com> wrote: > > Minidump is a best effort mechanism to collect useful and predefined > data for first level of debugging on end user devices running on > Qualcomm SoCs. It is built on the premise that System on Chip (SoC) > or subsystem part of SoC crashes, due to a range of hardware and > software bugs. Hence, the ability to collect accurate data is only > a best-effort. The data collected could be invalid or corrupted, > data collection itself could fail, and so on. > > Qualcomm devices in engineering mode provides a mechanism for > generating full system ramdumps for post mortem debugging. But in some > cases it's however not feasible to capture the entire content of RAM. > The minidump mechanism provides the means for selecting region should > be included in the ramdump. The solution supports extracting the > ramdump/minidump produced either over USB or stored to an attached > storage device. > > Minidump kernel driver implementation is divided into two parts for > simplicity, one is minidump core which can also be called minidump > frontend(As API gets exported from this driver for registration with > backend) and the other part is minidump backend i.e, where the underlying > implementation of minidump will be there. There could be different way > how the backend is implemented like Shared memory, Memory mapped IO > or Resource manager based where the guest region information is passed > to hypervisor via hypercalls. > > Minidump Client-1 Client-2 Client-5 Client-n > | | | | > | | ... | ... | > | | | | > | | | | > | | | | > | | | | > | | | | > | | | | > | +---+--------------+----+ | > +-----------+ qcom_minidump(core) +--------+ > | | > +------+-----+------+---+ > | | | > | | | > +---------------+ | +--------------------+ > | | | > | | | > | | | > v v v > +-------------------+ +-------------------+ +------------------+ > |qcom_minidump_smem | |qcom_minidump_mmio | | qcom_minidump_rm | > | | | | | | > +-------------------+ +-------------------+ +------------------+ > Shared memory Memory mapped IO Resource manager > (backend) (backend) (backend) > > Here, we will be giving all analogy of backend with SMEM as it is the > only implemented backend at present but general idea remains the same. the general > > The core of minidump feature is part of Qualcomm's boot firmware code. > It initializes shared memory (SMEM), which is a part of DDR and > allocates a small section of it to minidump table i.e also called the minidump > global table of content (G-ToC). Each subsystem (APSS, ADSP, ...) has > their own table of segments to be included in the minidump, all > references from a descriptor in SMEM (G-ToC). Each segment/region has > some details like name, physical address and it's size etc. and it > could be anywhere scattered in the DDR. > > qcom_minidump(core or frontend) driver adds the capability to add APSS > region to be dumped as part of ram dump collection. It provides > appropriate symbol register/unregister client regions. > > To simplify post mortem debugging, it creates and maintain an ELF > header as first region that gets updated upon registration > of a new region. ... > +#include <linux/device.h> > +#include <linux/export.h> > +#include <linux/kallsyms.h> > +#include <linux/kernel.h> Why? And again a lot of missing headers, like bug.h dev_printk.h errno.h export.h mutex.h slab.h > +#include <linux/module.h> > +#include <linux/printk.h> > +#include <linux/string.h> ... > +/* > + * In some of the Old Qualcomm devices, boot firmware statically allocates 300 > + * as total number of supported region (including all co-processors) in regions > + * minidump table out of which linux was using 201. In future, this limitation > + * from boot firmware might get removed by allocating the region dynamically. > + * So, keep it compatible with older devices, we can keep the current limit for So, to keep... > + * Linux to 201. > + */ ... > +static struct elf_shdr *elf_shdr_entry_addr(struct elfhdr *ehdr, int idx) > +{ > + struct elf_shdr *eshdr = (struct elf_shdr *)((size_t)ehdr + ehdr->e_shoff); Interesting casting pointer to a size_t. Perhaps void * would work more explicitly? Ditto for all other cases like this. > + return &eshdr[idx]; > +} ... > + old_idx += strscpy((strtab + old_idx), name, MAX_REGION_NAME_LENGTH); (Parentheses are not needed) strscpy() might return a very big number in this case. Is it a problem? ... > +unlock: out_unlock: ? Ditto for other similar cases. > + mutex_unlock(&md_lock); > + return ret; ... > + /* > + * Above are some prdefined sections/program header used predefined > + * for debug, update their count here. > + */ ... > +#ifndef _QCOM_MINIDUMP_INTERNAL_H_ > +#define _QCOM_MINIDUMP_INTERNAL_H_ > +#include <linux/elf.h> Not sure I see how it's used. You may provide forward declarations for the pointers. > +#include <soc/qcom/qcom_minidump.h> + kconfig.h for IS_ENABLED() ? MIssing forward declaration: struct device; ... > #ifndef _QCOM_MINIDUMP_H_ > #define _QCOM_MINIDUMP_H_ + types.h for phys_addr_t. ... > + * @size: Number of byte to dump from @address location, bytes > + * and it should be 4 byte aligned.
On Wed, Jun 28, 2023 at 06:04:31PM +0530, Mukesh Ojha wrote: > Minidump is a best effort mechanism to collect useful and predefined > data for first level of debugging on end user devices running on > Qualcomm SoCs. It is built on the premise that System on Chip (SoC) > or subsystem part of SoC crashes, due to a range of hardware and > software bugs. Hence, the ability to collect accurate data is only > a best-effort. The data collected could be invalid or corrupted, > data collection itself could fail, and so on. > > Qualcomm devices in engineering mode provides a mechanism for > generating full system ramdumps for post mortem debugging. But in some > cases it's however not feasible to capture the entire content of RAM. > The minidump mechanism provides the means for selecting region should > be included in the ramdump. The solution supports extracting the > ramdump/minidump produced either over USB or stored to an attached > storage device. > > Minidump kernel driver implementation is divided into two parts for > simplicity, one is minidump core which can also be called minidump > frontend(As API gets exported from this driver for registration with > backend) and the other part is minidump backend i.e, where the underlying > implementation of minidump will be there. There could be different way > how the backend is implemented like Shared memory, Memory mapped IO > or Resource manager based where the guest region information is passed > to hypervisor via hypercalls. > > Minidump Client-1 Client-2 Client-5 Client-n > | | | | > | | ... | ... | > | | | | > | | | | > | | | | > | | | | > | | | | > | | | | > | +---+--------------+----+ | > +-----------+ qcom_minidump(core) +--------+ > | | > +------+-----+------+---+ > | | | > | | | > +---------------+ | +--------------------+ > | | | > | | | > | | | > v v v > +-------------------+ +-------------------+ +------------------+ > |qcom_minidump_smem | |qcom_minidump_mmio | | qcom_minidump_rm | > | | | | | | > +-------------------+ +-------------------+ +------------------+ > Shared memory Memory mapped IO Resource manager > (backend) (backend) (backend) > > Here, we will be giving all analogy of backend with SMEM as it is the > only implemented backend at present but general idea remains the same. > > The core of minidump feature is part of Qualcomm's boot firmware code. > It initializes shared memory (SMEM), which is a part of DDR and > allocates a small section of it to minidump table i.e also called > global table of content (G-ToC). Each subsystem (APSS, ADSP, ...) has > their own table of segments to be included in the minidump, all > references from a descriptor in SMEM (G-ToC). Each segment/region has > some details like name, physical address and it's size etc. and it > could be anywhere scattered in the DDR. > > qcom_minidump(core or frontend) driver adds the capability to add APSS > region to be dumped as part of ram dump collection. It provides > appropriate symbol register/unregister client regions. > > To simplify post mortem debugging, it creates and maintain an ELF > header as first region that gets updated upon registration > of a new region. > > Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> > --- > drivers/soc/qcom/Kconfig | 15 + > drivers/soc/qcom/Makefile | 2 + > drivers/soc/qcom/qcom_minidump.c | 456 ++++++++++++++++++++++++++++++ > drivers/soc/qcom/qcom_minidump_internal.h | 75 +++++ > include/soc/qcom/qcom_minidump.h | 35 +++ > 5 files changed, 583 insertions(+) > create mode 100644 drivers/soc/qcom/qcom_minidump.c > create mode 100644 drivers/soc/qcom/qcom_minidump_internal.h > > diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig > index 982310b5a1cb..874ee8c3efe0 100644 > --- a/drivers/soc/qcom/Kconfig > +++ b/drivers/soc/qcom/Kconfig > @@ -279,6 +279,21 @@ config QCOM_INLINE_CRYPTO_ENGINE > tristate > select QCOM_SCM > > +config QCOM_MINIDUMP > + tristate "QCOM Minidump APSS Core Infrastructure" > + depends on ARCH_QCOM > + help > + This config allow linux core infrastructure for APSS minidump for > + underlying backend(smem etc.) which can hook themselves to this and > + work as one unit. So, this config should be selected in combination > + with its backend. > + > + After this Linux clients driver can register their internal data > + structures and debug messages as part of the apss minidump region > + and when the SoC is crashed, and these selective regions will be > + dumped instead of the entire DDR. This saves significant amount > + of time and/or storage space. > + > config QCOM_MINIDUMP_SMEM > tristate "QCOM Minidump SMEM (as backend) Support" > depends on ARCH_QCOM > diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile > index 89b775512bef..737d868757ac 100644 > --- a/drivers/soc/qcom/Makefile > +++ b/drivers/soc/qcom/Makefile > @@ -34,3 +34,5 @@ obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o > obj-$(CONFIG_QCOM_ICC_BWMON) += icc-bwmon.o > qcom_ice-objs += ice.o > obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE) += qcom_ice.o > +obj-$(CONFIG_QCOM_MINIDUMP) += qcom_minidump.o > +obj-$(CONFIG_QCOM_MINIDUMP_SMEM) += qcom_minidump_smem.o > diff --git a/drivers/soc/qcom/qcom_minidump.c b/drivers/soc/qcom/qcom_minidump.c > new file mode 100644 > index 000000000000..7744e57843ab > --- /dev/null > +++ b/drivers/soc/qcom/qcom_minidump.c > @@ -0,0 +1,456 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > + > +#include <linux/device.h> > +#include <linux/export.h> > +#include <linux/kallsyms.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/printk.h> > +#include <linux/string.h> > + > +#include "qcom_minidump_internal.h" > + > +/* > + * In some of the Old Qualcomm devices, boot firmware statically allocates 300 > + * as total number of supported region (including all co-processors) in > + * minidump table out of which linux was using 201. In future, this limitation > + * from boot firmware might get removed by allocating the region dynamically. > + * So, keep it compatible with older devices, we can keep the current limit for > + * Linux to 201. > + */ > +#define MAX_NUM_ENTRIES 201 > +#define MAX_STRTBL_SIZE (MAX_NUM_ENTRIES * MAX_REGION_NAME_LENGTH) > + Should not we receive these constraints from backend? > +/* > + * md_lock protects "md" during calls to qcom_minidump_backend_register(), > + * qcom_minidump_backend_unregister(). > + */ > +static DEFINE_MUTEX(md_lock); > + > +/* Only one front end will be attached to one back-end */ > +static struct minidump *md; > +static char *md_backend; > + Can you explain this a bit more? There is just one fronend, correct? Multiple possibilites of backend. Is it a limitation at the moment that we support only one backend or plan to support more backends later for the same frontend. Pls clarify. > +static struct elf_shdr *elf_shdr_entry_addr(struct elfhdr *ehdr, int idx) > +{ > + struct elf_shdr *eshdr = (struct elf_shdr *)((size_t)ehdr + ehdr->e_shoff); > + > + return &eshdr[idx]; > +} > + [...] > +/** > + * qcom_minidump_region_register() - Register region in APSS Minidump table. > + * @region: minidump region. > + * > + * Return: On success, it returns 0 and negative error value on failure. > + */ Are we not going to return any cookie upon success which can be passed to us during unregistration? > +int qcom_minidump_region_register(const struct qcom_minidump_region *region) > +{ > + int ret; > + > + if (!qcom_minidump_valid_region(region)) > + return -EINVAL; > + > + mutex_lock(&md_lock); > + if (!md) { > + mutex_unlock(&md_lock); > + pr_err("No backend registered yet, try again.."); > + return -EPROBE_DEFER; > + } > + > + ret = md->ops->md_region_register(md, region); > + if (ret) > + goto unlock; > + The md_lock description in the beginning does not seems to be correct. It is not limited to backend registration. It has much wider usage. You are holding the lock while calling into backend. Basically the synchronization is done in the front end. > + qcom_md_update_elf_header(region); > +unlock: > + mutex_unlock(&md_lock); > + return ret; > +} > +EXPORT_SYMBOL_GPL(qcom_minidump_region_register); > + > +/** > + * qcom_minidump_region_unregister() - Unregister region from APSS Minidump table. > + * @region: minidump region. > + * > + * Return: On success, it returns 0 and negative error value on failure. > + */ > +int qcom_minidump_region_unregister(const struct qcom_minidump_region *region) > +{ > + int ret; > + > + if (!qcom_minidump_valid_region(region)) > + return -EINVAL; > + > + mutex_lock(&md_lock); > + if (!md) { > + mutex_unlock(&md_lock); > + pr_err("No backend registered yet, try again.."); > + return -EPROBE_DEFER; > + } > + > + ret = md->ops->md_region_unregister(md, region); > + if (ret) > + goto unlock; > + The frontend is not validing that it is actually a registered client, it is left to backend. Seems that is more duplication in the backend(s). > + ret = qcom_minidump_clear_header(region); > +unlock: > + mutex_unlock(&md_lock); > + return ret; > +} > +EXPORT_SYMBOL_GPL(qcom_minidump_region_unregister); can we create a namespace for exporting these symbols? > + > +static int qcom_minidump_add_elf_header(struct minidump *md_data) > +{ [...] > + > +/** > + * qcom_minidump_backend_register() - Register backend minidump device. > + * @md_data: minidump backend driver data > + * > + * Return: On success, it returns 0 and negative error value on failure. > + */ > +int qcom_minidump_backend_register(struct minidump *md_data) > +{ > + int ret; > + > + if (!md_data->name || !md_data->dev || > + !md_data->ops || > + !md_data->ops->md_table_init || > + !md_data->ops->md_region_register || > + !md_data->ops->md_region_unregister || > + !md_data->ops->md_table_exit) { > + pr_warn("backend '%s' must fill/implement necessary fields\n", md->name); > + return -EINVAL; > + } > + > + if (md_backend && strcmp(md_backend, md_data->name)) { > + pr_warn("backend '%s' already in use: ignoring '%s'\n", > + md_backend, md_data->name); > + return -EBUSY; > + } > + > + mutex_lock(&md_lock); > + if (md) { > + dev_warn(md->dev, "backend '%s' already loaded: ignoring '%s'\n", > + md->name, md_data->name); > + ret = -EBUSY; > + goto unlock; > + } > + > + if (!md_data->max_region_limit || md_data->max_region_limit > MAX_NUM_ENTRIES) > + md_data->max_region_limit = MAX_NUM_ENTRIES; > + > + ret = md_data->ops->md_table_init(md_data); > + if (ret) { > + dev_err(md_data->dev, "minidump backend initialization failed: %d\n", ret); > + goto unlock; > + } > + > + /* First entry would be ELF header */ > + ret = qcom_minidump_add_elf_header(md_data); > + if (ret) { > + dev_err(md_data->dev, "Failed to add elf header: %d\n", ret); > + md_data->ops->md_table_exit(md_data); > + goto unlock; > + } > + > + md = md_data; > + md_backend = kstrdup(md->name, GFP_KERNEL); > + dev_info(md->dev, "Registered minidump backend : %s\n", md->name); > + What is the need for keeping md_backend separately? md::name is already present. Also, how do we prevent backend module unloading while it is inuse? or we don't need that constraint? > +unlock: > + mutex_unlock(&md_lock); > + return ret; > +} > +EXPORT_SYMBOL_GPL(qcom_minidump_backend_register); Thanks, Pavan
On 6/29/2023 8:03 AM, Pavan Kondeti wrote: > On Wed, Jun 28, 2023 at 06:04:31PM +0530, Mukesh Ojha wrote: >> Minidump is a best effort mechanism to collect useful and predefined >> data for first level of debugging on end user devices running on >> Qualcomm SoCs. It is built on the premise that System on Chip (SoC) >> or subsystem part of SoC crashes, due to a range of hardware and >> software bugs. Hence, the ability to collect accurate data is only >> a best-effort. The data collected could be invalid or corrupted, >> data collection itself could fail, and so on. >> >> Qualcomm devices in engineering mode provides a mechanism for >> generating full system ramdumps for post mortem debugging. But in some >> cases it's however not feasible to capture the entire content of RAM. >> The minidump mechanism provides the means for selecting region should >> be included in the ramdump. The solution supports extracting the >> ramdump/minidump produced either over USB or stored to an attached >> storage device. >> >> Minidump kernel driver implementation is divided into two parts for >> simplicity, one is minidump core which can also be called minidump >> frontend(As API gets exported from this driver for registration with >> backend) and the other part is minidump backend i.e, where the underlying >> implementation of minidump will be there. There could be different way >> how the backend is implemented like Shared memory, Memory mapped IO >> or Resource manager based where the guest region information is passed >> to hypervisor via hypercalls. >> >> Minidump Client-1 Client-2 Client-5 Client-n >> | | | | >> | | ... | ... | >> | | | | >> | | | | >> | | | | >> | | | | >> | | | | >> | | | | >> | +---+--------------+----+ | >> +-----------+ qcom_minidump(core) +--------+ >> | | >> +------+-----+------+---+ >> | | | >> | | | >> +---------------+ | +--------------------+ >> | | | >> | | | >> | | | >> v v v >> +-------------------+ +-------------------+ +------------------+ >> |qcom_minidump_smem | |qcom_minidump_mmio | | qcom_minidump_rm | >> | | | | | | >> +-------------------+ +-------------------+ +------------------+ >> Shared memory Memory mapped IO Resource manager >> (backend) (backend) (backend) >> >> Here, we will be giving all analogy of backend with SMEM as it is the >> only implemented backend at present but general idea remains the same. >> >> The core of minidump feature is part of Qualcomm's boot firmware code. >> It initializes shared memory (SMEM), which is a part of DDR and >> allocates a small section of it to minidump table i.e also called >> global table of content (G-ToC). Each subsystem (APSS, ADSP, ...) has >> their own table of segments to be included in the minidump, all >> references from a descriptor in SMEM (G-ToC). Each segment/region has >> some details like name, physical address and it's size etc. and it >> could be anywhere scattered in the DDR. >> >> qcom_minidump(core or frontend) driver adds the capability to add APSS >> region to be dumped as part of ram dump collection. It provides >> appropriate symbol register/unregister client regions. >> >> To simplify post mortem debugging, it creates and maintain an ELF >> header as first region that gets updated upon registration >> of a new region. >> >> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> >> --- >> drivers/soc/qcom/Kconfig | 15 + >> drivers/soc/qcom/Makefile | 2 + >> drivers/soc/qcom/qcom_minidump.c | 456 ++++++++++++++++++++++++++++++ >> drivers/soc/qcom/qcom_minidump_internal.h | 75 +++++ >> include/soc/qcom/qcom_minidump.h | 35 +++ >> 5 files changed, 583 insertions(+) >> create mode 100644 drivers/soc/qcom/qcom_minidump.c >> create mode 100644 drivers/soc/qcom/qcom_minidump_internal.h >> >> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig >> index 982310b5a1cb..874ee8c3efe0 100644 >> --- a/drivers/soc/qcom/Kconfig >> +++ b/drivers/soc/qcom/Kconfig >> @@ -279,6 +279,21 @@ config QCOM_INLINE_CRYPTO_ENGINE >> tristate >> select QCOM_SCM >> >> +config QCOM_MINIDUMP >> + tristate "QCOM Minidump APSS Core Infrastructure" >> + depends on ARCH_QCOM >> + help >> + This config allow linux core infrastructure for APSS minidump for >> + underlying backend(smem etc.) which can hook themselves to this and >> + work as one unit. So, this config should be selected in combination >> + with its backend. >> + >> + After this Linux clients driver can register their internal data >> + structures and debug messages as part of the apss minidump region >> + and when the SoC is crashed, and these selective regions will be >> + dumped instead of the entire DDR. This saves significant amount >> + of time and/or storage space. >> + >> config QCOM_MINIDUMP_SMEM >> tristate "QCOM Minidump SMEM (as backend) Support" >> depends on ARCH_QCOM >> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile >> index 89b775512bef..737d868757ac 100644 >> --- a/drivers/soc/qcom/Makefile >> +++ b/drivers/soc/qcom/Makefile >> @@ -34,3 +34,5 @@ obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o >> obj-$(CONFIG_QCOM_ICC_BWMON) += icc-bwmon.o >> qcom_ice-objs += ice.o >> obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE) += qcom_ice.o >> +obj-$(CONFIG_QCOM_MINIDUMP) += qcom_minidump.o >> +obj-$(CONFIG_QCOM_MINIDUMP_SMEM) += qcom_minidump_smem.o >> diff --git a/drivers/soc/qcom/qcom_minidump.c b/drivers/soc/qcom/qcom_minidump.c >> new file mode 100644 >> index 000000000000..7744e57843ab >> --- /dev/null >> +++ b/drivers/soc/qcom/qcom_minidump.c >> @@ -0,0 +1,456 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* >> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt >> + >> +#include <linux/device.h> >> +#include <linux/export.h> >> +#include <linux/kallsyms.h> >> +#include <linux/kernel.h> >> +#include <linux/module.h> >> +#include <linux/printk.h> >> +#include <linux/string.h> >> + >> +#include "qcom_minidump_internal.h" >> + >> +/* >> + * In some of the Old Qualcomm devices, boot firmware statically allocates 300 >> + * as total number of supported region (including all co-processors) in >> + * minidump table out of which linux was using 201. In future, this limitation >> + * from boot firmware might get removed by allocating the region dynamically. >> + * So, keep it compatible with older devices, we can keep the current limit for >> + * Linux to 201. >> + */ >> +#define MAX_NUM_ENTRIES 201 >> +#define MAX_STRTBL_SIZE (MAX_NUM_ENTRIES * MAX_REGION_NAME_LENGTH) >> + > > Should not we receive these constraints from backend? > >> +/* >> + * md_lock protects "md" during calls to qcom_minidump_backend_register(), >> + * qcom_minidump_backend_unregister(). >> + */ >> +static DEFINE_MUTEX(md_lock); >> + >> +/* Only one front end will be attached to one back-end */ >> +static struct minidump *md; >> +static char *md_backend; >> + > > Can you explain this a bit more? There is just one fronend, correct? > Multiple possibilites of backend. Sorry, for misleading with the comment. Was trying to be explicit here that only one backend can be attached to the front end .. Will fix the confusion. > > Is it a limitation at the moment that we support only one backend or > plan to support more backends later for the same frontend. Pls clarify. > >> +static struct elf_shdr *elf_shdr_entry_addr(struct elfhdr *ehdr, int idx) >> +{ >> + struct elf_shdr *eshdr = (struct elf_shdr *)((size_t)ehdr + ehdr->e_shoff); >> + >> + return &eshdr[idx]; >> +} >> + > > [...] > >> +/** >> + * qcom_minidump_region_register() - Register region in APSS Minidump table. >> + * @region: minidump region. >> + * >> + * Return: On success, it returns 0 and negative error value on failure. >> + */ > > Are we not going to return any cookie upon success which can be passed > to us during unregistration? e.g, Let's just say if we return the region number as an cookies, the problem i see that, we multiple unregistration is happening we will be shifting the array upwards and that results in the index/cookies does not retain the same for the shifted regions. So, at the moment, client need to pass the same region for un-registration as they have passed for registration.. > >> +int qcom_minidump_region_register(const struct qcom_minidump_region *region) >> +{ >> + int ret; >> + >> + if (!qcom_minidump_valid_region(region)) >> + return -EINVAL; >> + >> + mutex_lock(&md_lock); >> + if (!md) { >> + mutex_unlock(&md_lock); >> + pr_err("No backend registered yet, try again.."); >> + return -EPROBE_DEFER; >> + } >> + >> + ret = md->ops->md_region_register(md, region); >> + if (ret) >> + goto unlock; >> + > > The md_lock description in the beginning does not seems to be correct. > It is not limited to backend registration. It has much wider usage. > > You are holding the lock while calling into backend. Basically the > synchronization is done in the front end. Initially, the thought was to have the backend their own lock but that is irrelevant as all the contention is there in the front end. So, used the same lock for synchronization as i moved in developement and the later that comment became obsolete. Thanks for catching this. will fix the comment. > >> + qcom_md_update_elf_header(region); >> +unlock: >> + mutex_unlock(&md_lock); >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(qcom_minidump_region_register); >> + >> +/** >> + * qcom_minidump_region_unregister() - Unregister region from APSS Minidump table. >> + * @region: minidump region. >> + * >> + * Return: On success, it returns 0 and negative error value on failure. >> + */ >> +int qcom_minidump_region_unregister(const struct qcom_minidump_region *region) >> +{ >> + int ret; >> + >> + if (!qcom_minidump_valid_region(region)) >> + return -EINVAL; >> + >> + mutex_lock(&md_lock); >> + if (!md) { >> + mutex_unlock(&md_lock); >> + pr_err("No backend registered yet, try again.."); >> + return -EPROBE_DEFER; >> + } >> + >> + ret = md->ops->md_region_unregister(md, region); >> + if (ret) >> + goto unlock; >> + > > The frontend is not validing that it is actually a registered client, it > is left to backend. Seems that is more duplication in the backend(s). For that front-end need to cache each registered entry and that is exact copy at the backend, will need extra memory for copied data, so, that's the reason of this behavior. > >> + ret = qcom_minidump_clear_header(region); >> +unlock: >> + mutex_unlock(&md_lock); >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(qcom_minidump_region_unregister); > > can we create a namespace for exporting these symbols? Any specific reason, you are suggesting this ? > >> + >> +static int qcom_minidump_add_elf_header(struct minidump *md_data) >> +{ > > [...] > >> + >> +/** >> + * qcom_minidump_backend_register() - Register backend minidump device. >> + * @md_data: minidump backend driver data >> + * >> + * Return: On success, it returns 0 and negative error value on failure. >> + */ >> +int qcom_minidump_backend_register(struct minidump *md_data) >> +{ >> + int ret; >> + >> + if (!md_data->name || !md_data->dev || >> + !md_data->ops || >> + !md_data->ops->md_table_init || >> + !md_data->ops->md_region_register || >> + !md_data->ops->md_region_unregister || >> + !md_data->ops->md_table_exit) { >> + pr_warn("backend '%s' must fill/implement necessary fields\n", md->name); >> + return -EINVAL; >> + } >> + >> + if (md_backend && strcmp(md_backend, md_data->name)) { >> + pr_warn("backend '%s' already in use: ignoring '%s'\n", >> + md_backend, md_data->name); >> + return -EBUSY; >> + } >> + >> + mutex_lock(&md_lock); >> + if (md) { >> + dev_warn(md->dev, "backend '%s' already loaded: ignoring '%s'\n", >> + md->name, md_data->name); >> + ret = -EBUSY; >> + goto unlock; >> + } >> + >> + if (!md_data->max_region_limit || md_data->max_region_limit > MAX_NUM_ENTRIES) >> + md_data->max_region_limit = MAX_NUM_ENTRIES; >> + >> + ret = md_data->ops->md_table_init(md_data); >> + if (ret) { >> + dev_err(md_data->dev, "minidump backend initialization failed: %d\n", ret); >> + goto unlock; >> + } >> + >> + /* First entry would be ELF header */ >> + ret = qcom_minidump_add_elf_header(md_data); >> + if (ret) { >> + dev_err(md_data->dev, "Failed to add elf header: %d\n", ret); >> + md_data->ops->md_table_exit(md_data); >> + goto unlock; >> + } >> + >> + md = md_data; >> + md_backend = kstrdup(md->name, GFP_KERNEL); >> + dev_info(md->dev, "Registered minidump backend : %s\n", md->name); >> + > > What is the need for keeping md_backend separately? md::name is already > present. It looks redundant, this is one of cleanup, missed, thanks.. > > Also, how do we prevent backend module unloading while it is inuse? or > we don't need that constraint? md_lock is there for that.. In next patch series, i am going to make all of this as static driver, so that constraints will not be there ? -Mukesh > >> +unlock: >> + mutex_unlock(&md_lock); >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(qcom_minidump_backend_register); > > Thanks, > Pavan
On Fri, Jun 30, 2023 at 12:45:13PM +0530, Mukesh Ojha wrote: > > > +/** > > > + * qcom_minidump_region_register() - Register region in APSS Minidump table. > > > + * @region: minidump region. > > > + * > > > + * Return: On success, it returns 0 and negative error value on failure. > > > + */ > > > > Are we not going to return any cookie upon success which can be passed > > to us during unregistration? > > e.g, Let's just say if we return the region number as an cookies, the > problem i see that, we multiple unregistration is happening we will > be shifting the array upwards and that results in the index/cookies does > not retain the same for the shifted regions. > > So, at the moment, client need to pass the same region for un-registration > as they have passed for registration.. > From a driver user pov, there is no reason for keeping qcom_minidump_region struct around after the registration, agree? However, the unregistration API expects it again, so the driver needs to cache it. The region is no way being used by the minidump core either..so it is just there for no reason. Hence I asked this question. Thanks for the explanation about why the region number can't be used as cookie. Is it a limitation on the firmware that we need to left shift all regions when a region is deleted? I ask this because minidump_region::valid is avaialble for Linux to mark a lazy deletion. Sure your look up would have to traverse the entire array in worst case, but today also you are doing that for duplicate name check. If this lazy deletion can be implemented, the region number can be used a cookie, right? > > > > > +int qcom_minidump_region_register(const struct qcom_minidump_region *region) > > > +{ > > > + int ret; > > > + > > > + if (!qcom_minidump_valid_region(region)) > > > + return -EINVAL; > > > + > > > + mutex_lock(&md_lock); > > > + if (!md) { > > > + mutex_unlock(&md_lock); > > > + pr_err("No backend registered yet, try again.."); > > > + return -EPROBE_DEFER; > > > + } > > > + > > > + ret = md->ops->md_region_register(md, region); > > > + if (ret) > > > + goto unlock; > > > + > > > > The md_lock description in the beginning does not seems to be correct. > > It is not limited to backend registration. It has much wider usage. > > > > You are holding the lock while calling into backend. Basically the > > synchronization is done in the front end. > > Initially, the thought was to have the backend their own lock but that > is irrelevant as all the contention is there in the front end. > > So, used the same lock for synchronization as i moved in developement > and the later that comment became obsolete. > > Thanks for catching this. > will fix the comment. > Sure > > > > > + qcom_md_update_elf_header(region); > > > +unlock: > > > + mutex_unlock(&md_lock); > > > + return ret; > > > +} > > > +EXPORT_SYMBOL_GPL(qcom_minidump_region_register); > > > > > > + ret = qcom_minidump_clear_header(region); > > > +unlock: > > > + mutex_unlock(&md_lock); > > > + return ret; > > > +} > > > +EXPORT_SYMBOL_GPL(qcom_minidump_region_unregister); > > > > can we create a namespace for exporting these symbols? > > Any specific reason, you are suggesting this ? > My original intention was to mark qcom_minidump_backend_register() and qcom_minidump_backend_unregister() under a namespace. Because these are not meant for any drivers but only for minidump backend. That serves as a clear documentation that minidump implementation is spanned across this frontend and backend modules. Thanks, Pavan
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 982310b5a1cb..874ee8c3efe0 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -279,6 +279,21 @@ config QCOM_INLINE_CRYPTO_ENGINE tristate select QCOM_SCM +config QCOM_MINIDUMP + tristate "QCOM Minidump APSS Core Infrastructure" + depends on ARCH_QCOM + help + This config allow linux core infrastructure for APSS minidump for + underlying backend(smem etc.) which can hook themselves to this and + work as one unit. So, this config should be selected in combination + with its backend. + + After this Linux clients driver can register their internal data + structures and debug messages as part of the apss minidump region + and when the SoC is crashed, and these selective regions will be + dumped instead of the entire DDR. This saves significant amount + of time and/or storage space. + config QCOM_MINIDUMP_SMEM tristate "QCOM Minidump SMEM (as backend) Support" depends on ARCH_QCOM diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index 89b775512bef..737d868757ac 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -34,3 +34,5 @@ obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o obj-$(CONFIG_QCOM_ICC_BWMON) += icc-bwmon.o qcom_ice-objs += ice.o obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE) += qcom_ice.o +obj-$(CONFIG_QCOM_MINIDUMP) += qcom_minidump.o +obj-$(CONFIG_QCOM_MINIDUMP_SMEM) += qcom_minidump_smem.o diff --git a/drivers/soc/qcom/qcom_minidump.c b/drivers/soc/qcom/qcom_minidump.c new file mode 100644 index 000000000000..7744e57843ab --- /dev/null +++ b/drivers/soc/qcom/qcom_minidump.c @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/device.h> +#include <linux/export.h> +#include <linux/kallsyms.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/printk.h> +#include <linux/string.h> + +#include "qcom_minidump_internal.h" + +/* + * In some of the Old Qualcomm devices, boot firmware statically allocates 300 + * as total number of supported region (including all co-processors) in + * minidump table out of which linux was using 201. In future, this limitation + * from boot firmware might get removed by allocating the region dynamically. + * So, keep it compatible with older devices, we can keep the current limit for + * Linux to 201. + */ +#define MAX_NUM_ENTRIES 201 +#define MAX_STRTBL_SIZE (MAX_NUM_ENTRIES * MAX_REGION_NAME_LENGTH) + +/* + * md_lock protects "md" during calls to qcom_minidump_backend_register(), + * qcom_minidump_backend_unregister(). + */ +static DEFINE_MUTEX(md_lock); + +/* Only one front end will be attached to one back-end */ +static struct minidump *md; +static char *md_backend; + +static struct elf_shdr *elf_shdr_entry_addr(struct elfhdr *ehdr, int idx) +{ + struct elf_shdr *eshdr = (struct elf_shdr *)((size_t)ehdr + ehdr->e_shoff); + + return &eshdr[idx]; +} + +static struct elf_phdr *elf_phdr_entry_addr(struct elfhdr *ehdr, int idx) +{ + struct elf_phdr *ephdr = (struct elf_phdr *)((size_t)ehdr + ehdr->e_phoff); + + return &ephdr[idx]; +} + +static char *elf_str_table_start(struct elfhdr *ehdr) +{ + struct elf_shdr *eshdr; + + if (ehdr->e_shstrndx == SHN_UNDEF) + return NULL; + + eshdr = elf_shdr_entry_addr(ehdr, ehdr->e_shstrndx); + return (char *)ehdr + eshdr->sh_offset; +} + +static char *elf_lookup_string(struct elfhdr *ehdr, int offset) +{ + char *strtab = elf_str_table_start(ehdr); + + if (!strtab || (md->elf.strtable_idx < offset)) + return NULL; + + return strtab + offset; +} + +static unsigned int append_str_to_strtable(struct minidump *md, const char *name) +{ + char *strtab = elf_str_table_start(md->elf.ehdr); + unsigned int old_idx = md->elf.strtable_idx; + unsigned int ret; + + if (!strtab || !name) + return 0; + + ret = old_idx; + old_idx += strscpy((strtab + old_idx), name, MAX_REGION_NAME_LENGTH); + md->elf.strtable_idx = old_idx + 1; + + return ret; +} + +static int qcom_minidump_clear_header(const struct qcom_minidump_region *region) +{ + struct elfhdr *ehdr = md->elf.ehdr; + struct elf_shdr *shdr; + struct elf_shdr *tmp_shdr; + struct elf_phdr *phdr; + struct elf_phdr *tmp_phdr; + unsigned int phidx; + unsigned int shidx; + unsigned int len; + unsigned int i; + char *shname; + + for (i = 0; i < ehdr->e_phnum; i++) { + phdr = elf_phdr_entry_addr(ehdr, i); + if (phdr->p_paddr == region->phys_addr && + phdr->p_memsz == region->size) + break; + } + + if (i == ehdr->e_phnum) { + dev_err(md->dev, "Cannot find program header entry in elf\n"); + return -EINVAL; + } + + phidx = i; + for (i = 0; i < ehdr->e_shnum; i++) { + shdr = elf_shdr_entry_addr(ehdr, i); + shname = elf_lookup_string(ehdr, shdr->sh_name); + if (shname && !strcmp(shname, region->name) && + shdr->sh_addr == (elf_addr_t)region->virt_addr && + shdr->sh_size == region->size) + break; + } + + if (i == ehdr->e_shnum) { + dev_err(md->dev, "Cannot find section header entry in elf\n"); + return -EINVAL; + } + + shidx = i; + if (shdr->sh_offset != phdr->p_offset) { + dev_err(md->dev, "Invalid entry details for region: %s\n", region->name); + return -EINVAL; + } + + /* Clear name in string table */ + len = strlen(shname) + 1; + memmove(shname, shname + len, md->elf.strtable_idx - shdr->sh_name - len); + md->elf.strtable_idx -= len; + + /* Clear program header */ + tmp_phdr = elf_phdr_entry_addr(ehdr, phidx); + for (i = phidx; i < ehdr->e_phnum - 1; i++) { + tmp_phdr = elf_phdr_entry_addr(ehdr, i + 1); + phdr = elf_phdr_entry_addr(ehdr, i); + memcpy(phdr, tmp_phdr, sizeof(struct elf_phdr)); + phdr->p_offset = phdr->p_offset - region->size; + } + memset(tmp_phdr, 0, sizeof(struct elf_phdr)); + ehdr->e_phnum--; + + /* Clear section header */ + tmp_shdr = elf_shdr_entry_addr(ehdr, shidx); + for (i = shidx; i < ehdr->e_shnum - 1; i++) { + tmp_shdr = elf_shdr_entry_addr(ehdr, i + 1); + shdr = elf_shdr_entry_addr(ehdr, i); + memcpy(shdr, tmp_shdr, sizeof(struct elf_shdr)); + shdr->sh_offset -= region->size; + shdr->sh_name -= len; + } + + memset(tmp_shdr, 0, sizeof(struct elf_shdr)); + ehdr->e_shnum--; + md->elf.elf_offset -= region->size; + + return 0; +} + +static void qcom_md_update_elf_header(const struct qcom_minidump_region *region) +{ + struct elfhdr *ehdr = md->elf.ehdr; + struct elf_shdr *shdr; + struct elf_phdr *phdr; + + shdr = elf_shdr_entry_addr(ehdr, ehdr->e_shnum++); + phdr = elf_phdr_entry_addr(ehdr, ehdr->e_phnum++); + + shdr->sh_type = SHT_PROGBITS; + shdr->sh_name = append_str_to_strtable(md, region->name); + shdr->sh_addr = (elf_addr_t)region->virt_addr; + shdr->sh_size = region->size; + shdr->sh_flags = SHF_WRITE; + shdr->sh_offset = md->elf.elf_offset; + shdr->sh_entsize = 0; + + phdr->p_type = PT_LOAD; + phdr->p_offset = md->elf.elf_offset; + phdr->p_vaddr = (elf_addr_t)region->virt_addr; + phdr->p_paddr = region->phys_addr; + phdr->p_filesz = phdr->p_memsz = region->size; + phdr->p_flags = PF_R | PF_W; + md->elf.elf_offset += shdr->sh_size; +} + +static bool qcom_minidump_valid_region(const struct qcom_minidump_region *region) +{ + return region && + strnlen(region->name, MAX_NAME_LENGTH) < MAX_NAME_LENGTH && + region->virt_addr && + region->size && + IS_ALIGNED(region->size, 4); +} + +/** + * qcom_minidump_region_register() - Register region in APSS Minidump table. + * @region: minidump region. + * + * Return: On success, it returns 0 and negative error value on failure. + */ +int qcom_minidump_region_register(const struct qcom_minidump_region *region) +{ + int ret; + + if (!qcom_minidump_valid_region(region)) + return -EINVAL; + + mutex_lock(&md_lock); + if (!md) { + mutex_unlock(&md_lock); + pr_err("No backend registered yet, try again.."); + return -EPROBE_DEFER; + } + + ret = md->ops->md_region_register(md, region); + if (ret) + goto unlock; + + qcom_md_update_elf_header(region); +unlock: + mutex_unlock(&md_lock); + return ret; +} +EXPORT_SYMBOL_GPL(qcom_minidump_region_register); + +/** + * qcom_minidump_region_unregister() - Unregister region from APSS Minidump table. + * @region: minidump region. + * + * Return: On success, it returns 0 and negative error value on failure. + */ +int qcom_minidump_region_unregister(const struct qcom_minidump_region *region) +{ + int ret; + + if (!qcom_minidump_valid_region(region)) + return -EINVAL; + + mutex_lock(&md_lock); + if (!md) { + mutex_unlock(&md_lock); + pr_err("No backend registered yet, try again.."); + return -EPROBE_DEFER; + } + + ret = md->ops->md_region_unregister(md, region); + if (ret) + goto unlock; + + ret = qcom_minidump_clear_header(region); +unlock: + mutex_unlock(&md_lock); + return ret; +} +EXPORT_SYMBOL_GPL(qcom_minidump_region_unregister); + +static int qcom_minidump_add_elf_header(struct minidump *md_data) +{ + struct qcom_minidump_region elfregion; + struct elfhdr *ehdr; + struct elf_shdr *shdr; + struct elf_phdr *phdr; + unsigned int elfh_size; + unsigned int strtbl_off; + unsigned int phdr_off; + char *linux_banner; + unsigned int banner_len; + char *banner; + + linux_banner = (char *)kallsyms_lookup_name("linux_banner"); + banner_len = strlen(linux_banner); + /* + * Header buffer contains: + * ELF header, (MAX_NUM_ENTRIES + 4) of Section and Program ELF headers, + * where, 4 additional entries, one for empty header, one for string table + * one for minidump table and one for linux banner. + * + * Linux banner is stored in minidump to aid post mortem tools to determine + * the kernel version. + */ + elfh_size = sizeof(*ehdr); + elfh_size += MAX_STRTBL_SIZE; + elfh_size += banner_len + 1; + elfh_size += ((sizeof(*shdr) + sizeof(*phdr)) * (MAX_NUM_ENTRIES + 4)); + elfh_size = ALIGN(elfh_size, 4); + + md_data->elf.ehdr = devm_kzalloc(md_data->dev, elfh_size, GFP_KERNEL); + if (!md_data->elf.ehdr) + return -ENOMEM; + + ehdr = md_data->elf.ehdr; + /* Assign Section/Program headers offset */ + md_data->elf.shdr = shdr = (struct elf_shdr *)(ehdr + 1); + md_data->elf.phdr = phdr = (struct elf_phdr *)(shdr + MAX_NUM_ENTRIES); + phdr_off = sizeof(*ehdr) + (sizeof(*shdr) * MAX_NUM_ENTRIES); + + memcpy(ehdr->e_ident, ELFMAG, SELFMAG); + ehdr->e_ident[EI_CLASS] = ELF_CLASS; + ehdr->e_ident[EI_DATA] = ELF_DATA; + ehdr->e_ident[EI_VERSION] = EV_CURRENT; + ehdr->e_ident[EI_OSABI] = ELF_OSABI; + ehdr->e_type = ET_CORE; + ehdr->e_machine = ELF_ARCH; + ehdr->e_version = EV_CURRENT; + ehdr->e_ehsize = sizeof(*ehdr); + ehdr->e_phoff = phdr_off; + ehdr->e_phentsize = sizeof(*phdr); + ehdr->e_shoff = sizeof(*ehdr); + ehdr->e_shentsize = sizeof(*shdr); + ehdr->e_shstrndx = 1; + + md_data->elf.elf_offset = elfh_size; + /* + * The zeroth index of the section header is reserved and is rarely used. + * Set the section header as null (SHN_UNDEF) and move to the next one. + * 2nd Section is String table. + */ + md_data->elf.strtable_idx = 1; + strtbl_off = sizeof(*ehdr) + ((sizeof(*phdr) + sizeof(*shdr)) * MAX_NUM_ENTRIES); + shdr++; + shdr->sh_type = SHT_STRTAB; + shdr->sh_offset = (elf_addr_t)strtbl_off; + shdr->sh_size = MAX_STRTBL_SIZE; + shdr->sh_entsize = 0; + shdr->sh_flags = 0; + shdr->sh_name = append_str_to_strtable(md_data, "STR_TBL"); + shdr++; + + /* 3rd Section is Linux banner */ + banner = (char *)ehdr + strtbl_off + MAX_STRTBL_SIZE; + memcpy(banner, linux_banner, banner_len); + + shdr->sh_type = SHT_PROGBITS; + shdr->sh_offset = (elf_addr_t)(strtbl_off + MAX_STRTBL_SIZE); + shdr->sh_size = banner_len + 1; + shdr->sh_addr = (elf_addr_t)linux_banner; + shdr->sh_entsize = 0; + shdr->sh_flags = SHF_WRITE; + shdr->sh_name = append_str_to_strtable(md_data, "linux_banner"); + + phdr->p_type = PT_LOAD; + phdr->p_offset = (elf_addr_t)(strtbl_off + MAX_STRTBL_SIZE); + phdr->p_vaddr = (elf_addr_t)linux_banner; + phdr->p_paddr = virt_to_phys(linux_banner); + phdr->p_filesz = phdr->p_memsz = banner_len + 1; + phdr->p_flags = PF_R | PF_W; + + /* + * Above are some prdefined sections/program header used + * for debug, update their count here. + */ + ehdr->e_phnum = 1; + ehdr->e_shnum = 3; + + /* Register ELF header as first region */ + strscpy(elfregion.name, "KELF_HEADER", sizeof(elfregion.name)); + elfregion.virt_addr = md_data->elf.ehdr; + elfregion.phys_addr = virt_to_phys(md_data->elf.ehdr); + elfregion.size = elfh_size; + + return md_data->ops->md_region_register(md_data, &elfregion); +} + +/** + * qcom_minidump_backend_register() - Register backend minidump device. + * @md_data: minidump backend driver data + * + * Return: On success, it returns 0 and negative error value on failure. + */ +int qcom_minidump_backend_register(struct minidump *md_data) +{ + int ret; + + if (!md_data->name || !md_data->dev || + !md_data->ops || + !md_data->ops->md_table_init || + !md_data->ops->md_region_register || + !md_data->ops->md_region_unregister || + !md_data->ops->md_table_exit) { + pr_warn("backend '%s' must fill/implement necessary fields\n", md->name); + return -EINVAL; + } + + if (md_backend && strcmp(md_backend, md_data->name)) { + pr_warn("backend '%s' already in use: ignoring '%s'\n", + md_backend, md_data->name); + return -EBUSY; + } + + mutex_lock(&md_lock); + if (md) { + dev_warn(md->dev, "backend '%s' already loaded: ignoring '%s'\n", + md->name, md_data->name); + ret = -EBUSY; + goto unlock; + } + + if (!md_data->max_region_limit || md_data->max_region_limit > MAX_NUM_ENTRIES) + md_data->max_region_limit = MAX_NUM_ENTRIES; + + ret = md_data->ops->md_table_init(md_data); + if (ret) { + dev_err(md_data->dev, "minidump backend initialization failed: %d\n", ret); + goto unlock; + } + + /* First entry would be ELF header */ + ret = qcom_minidump_add_elf_header(md_data); + if (ret) { + dev_err(md_data->dev, "Failed to add elf header: %d\n", ret); + md_data->ops->md_table_exit(md_data); + goto unlock; + } + + md = md_data; + md_backend = kstrdup(md->name, GFP_KERNEL); + dev_info(md->dev, "Registered minidump backend : %s\n", md->name); + +unlock: + mutex_unlock(&md_lock); + return ret; +} +EXPORT_SYMBOL_GPL(qcom_minidump_backend_register); + +/** + * qcom_minidump_backend_unregister() - Unregister backend minidump device. + * @md_data: minidump backend driver data + */ +void qcom_minidump_backend_unregister(struct minidump *md_data) +{ + mutex_lock(&md_lock); + /* Only one backend can be registered at a time. */ + if (WARN_ON(md_data != md)) + goto unlock; + + dev_info(md_data->dev, "Unregistered %s as minidump backend\n", md_data->name); + md_data->ops->md_table_exit(md_data); + kfree(md_backend); + md_backend = NULL; + md = NULL; +unlock: + mutex_unlock(&md_lock); +} +EXPORT_SYMBOL_GPL(qcom_minidump_backend_unregister); + +MODULE_DESCRIPTION("Qualcomm minidump core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/soc/qcom/qcom_minidump_internal.h b/drivers/soc/qcom/qcom_minidump_internal.h new file mode 100644 index 000000000000..9031b1b0a046 --- /dev/null +++ b/drivers/soc/qcom/qcom_minidump_internal.h @@ -0,0 +1,75 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _QCOM_MINIDUMP_INTERNAL_H_ +#define _QCOM_MINIDUMP_INTERNAL_H_ + +#include <linux/elf.h> +#include <soc/qcom/qcom_minidump.h> + +#define MAX_REGION_NAME_LENGTH 16 + +struct minidump; +/** + * struct minidump_ops - APSS Minidump operation structure, each underlying + * backend need to add their hooks to it. + * + * @md_table_init: Get the hold of APSS minidump table for the backend + * and initialize it with details. + * @md_table_exit: Clean up the stuff populated while md_table_init() + * @md_region_register: Callback to register the region at the backend. + * @md_region_unregister: Callback to unregister the region at the backend. + */ +struct minidump_ops { + int (*md_table_init)(struct minidump *md); + int (*md_table_exit)(struct minidump *md); + int (*md_region_register)(struct minidump *md, + const struct qcom_minidump_region *region); + int (*md_region_unregister)(struct minidump *md, + const struct qcom_minidump_region *region); +}; + +/** + * struct minidump_elfhdr - Minidump table elf header + * @ehdr: elf main header + * @shdr: Section header + * @phdr: Program header + * @elf_offset: Section offset in elf + * @strtable_idx: String table current index position + */ +struct minidump_elfhdr { + struct elfhdr *ehdr; + struct elf_shdr *shdr; + struct elf_phdr *phdr; + size_t elf_offset; + size_t strtable_idx; +}; + +/** + * struct minidump - Qualcomm minidump core information + * @name : Minidump backend name + * @ops : set of callback need to be implemented + * @elf : Minidump elf header + * @dev : Minidump backend device + * @max_num_limit : Maximum number of region limit + * @apss_data : Backend driver's private data pointer + */ +struct minidump { + const char *name; + struct minidump_ops *ops; + struct minidump_elfhdr elf; + struct device *dev; + unsigned int max_region_limit; + void *apss_data; +}; + +#if IS_ENABLED(CONFIG_QCOM_MINIDUMP) +int qcom_minidump_backend_register(struct minidump *md); +void qcom_minidump_backend_unregister(struct minidump *md); +#else +int qcom_minidump_backend_register(struct minidump *md) { return 0; } +void qcom_minidump_backend_unregister(struct minidump *md) {} +#endif /* CONFIG_QCOM_MINIDUMP */ +#endif /* _QCOM_MINIDUMP_INTERNAL_H_ */ diff --git a/include/soc/qcom/qcom_minidump.h b/include/soc/qcom/qcom_minidump.h index d7747c27fd45..d0bebc3daac5 100644 --- a/include/soc/qcom/qcom_minidump.h +++ b/include/soc/qcom/qcom_minidump.h @@ -1,11 +1,46 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* + * This file contains data structure which should be used by the + * APSS minidump clients. + * * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. */ #ifndef _QCOM_MINIDUMP_H_ #define _QCOM_MINIDUMP_H_ +#define MAX_NAME_LENGTH 12 +/** + * struct qcom_minidump_region - APSS Minidump region information + * + * @name: Entry name, Minidump will dump binary with this name. + * @virt_addr: Virtual address of the entry. + * @phys_addr: Physical address of the entry to dump. + * @size: Number of byte to dump from @address location, + * and it should be 4 byte aligned. + */ +struct qcom_minidump_region { + char name[MAX_NAME_LENGTH]; + void *virt_addr; + phys_addr_t phys_addr; + size_t size; +}; + +#if IS_ENABLED(CONFIG_QCOM_MINIDUMP) +int qcom_minidump_region_register(const struct qcom_minidump_region *region); +int qcom_minidump_region_unregister(const struct qcom_minidump_region *region); +#else +static inline int qcom_minidump_region_register(const struct qcom_minidump_region *region) +{ + /* Return quietly, if minidump is not enabled */ + return 0; +} +static inline int qcom_minidump_region_unregister(const struct qcom_minidump_region *region) +{ + return 0; +} +#endif /* CONFIG_QCOM_MINIDUMP */ + #if IS_ENABLED(CONFIG_QCOM_MINIDUMP_SMEM) void *qcom_ss_md_mapped_base(unsigned int minidump_id, int *seg_cnt); int qcom_ss_valid_segment_info(void *ptr, int i, char **name,
Minidump is a best effort mechanism to collect useful and predefined data for first level of debugging on end user devices running on Qualcomm SoCs. It is built on the premise that System on Chip (SoC) or subsystem part of SoC crashes, due to a range of hardware and software bugs. Hence, the ability to collect accurate data is only a best-effort. The data collected could be invalid or corrupted, data collection itself could fail, and so on. Qualcomm devices in engineering mode provides a mechanism for generating full system ramdumps for post mortem debugging. But in some cases it's however not feasible to capture the entire content of RAM. The minidump mechanism provides the means for selecting region should be included in the ramdump. The solution supports extracting the ramdump/minidump produced either over USB or stored to an attached storage device. Minidump kernel driver implementation is divided into two parts for simplicity, one is minidump core which can also be called minidump frontend(As API gets exported from this driver for registration with backend) and the other part is minidump backend i.e, where the underlying implementation of minidump will be there. There could be different way how the backend is implemented like Shared memory, Memory mapped IO or Resource manager based where the guest region information is passed to hypervisor via hypercalls. Minidump Client-1 Client-2 Client-5 Client-n | | | | | | ... | ... | | | | | | | | | | | | | | | | | | | | | | | | | | +---+--------------+----+ | +-----------+ qcom_minidump(core) +--------+ | | +------+-----+------+---+ | | | | | | +---------------+ | +--------------------+ | | | | | | | | | v v v +-------------------+ +-------------------+ +------------------+ |qcom_minidump_smem | |qcom_minidump_mmio | | qcom_minidump_rm | | | | | | | +-------------------+ +-------------------+ +------------------+ Shared memory Memory mapped IO Resource manager (backend) (backend) (backend) Here, we will be giving all analogy of backend with SMEM as it is the only implemented backend at present but general idea remains the same. The core of minidump feature is part of Qualcomm's boot firmware code. It initializes shared memory (SMEM), which is a part of DDR and allocates a small section of it to minidump table i.e also called global table of content (G-ToC). Each subsystem (APSS, ADSP, ...) has their own table of segments to be included in the minidump, all references from a descriptor in SMEM (G-ToC). Each segment/region has some details like name, physical address and it's size etc. and it could be anywhere scattered in the DDR. qcom_minidump(core or frontend) driver adds the capability to add APSS region to be dumped as part of ram dump collection. It provides appropriate symbol register/unregister client regions. To simplify post mortem debugging, it creates and maintain an ELF header as first region that gets updated upon registration of a new region. Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> --- drivers/soc/qcom/Kconfig | 15 + drivers/soc/qcom/Makefile | 2 + drivers/soc/qcom/qcom_minidump.c | 456 ++++++++++++++++++++++++++++++ drivers/soc/qcom/qcom_minidump_internal.h | 75 +++++ include/soc/qcom/qcom_minidump.h | 35 +++ 5 files changed, 583 insertions(+) create mode 100644 drivers/soc/qcom/qcom_minidump.c create mode 100644 drivers/soc/qcom/qcom_minidump_internal.h