diff mbox series

[v4,33/35] maple_tree: Update testing code for mas_{next,prev,walk}

Message ID 20230518145544.1722059-34-Liam.Howlett@oracle.com (mailing list archive)
State New
Headers show
Series Maple tree mas_{next,prev}_range() and cleanup | expand

Commit Message

Liam R. Howlett May 18, 2023, 2:55 p.m. UTC
Now that the functions have changed the limits, update the testing of
the maple tree to test these new settings.

Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
---
 lib/test_maple_tree.c | 638 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 633 insertions(+), 5 deletions(-)

Comments

Geert Uytterhoeven July 2, 2023, 6:20 p.m. UTC | #1
Hi Liam,

On Thu, May 18, 2023 at 9:37 PM Liam R. Howlett <Liam.Howlett@oracle.com> wrote:
> Now that the functions have changed the limits, update the testing of
> the maple tree to test these new settings.
>
> Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>

Thanks for your patch, which is now commit eb2e817f38cafbf7
("maple_tree: update testing code for mas_{next,prev,walk}") in

> --- a/lib/test_maple_tree.c
> +++ b/lib/test_maple_tree.c
> @@ -2011,7 +2011,7 @@ static noinline void __init next_prev_test(struct maple_tree *mt)
>
>         val = mas_next(&mas, ULONG_MAX);
>         MT_BUG_ON(mt, val != NULL);
> -       MT_BUG_ON(mt, mas.index != ULONG_MAX);
> +       MT_BUG_ON(mt, mas.index != 0x7d6);

On m68k (ARAnyM):

    TEST STARTING

    BUG at next_prev_test:2014 (1)
    Pass: 3749128 Run:3749129

And after that it seems to hang[*].

After adding a debug print (thus shifting all line numbers by +1):

    next_prev_test:mas.index = 0x138e
    BUG at next_prev_test:2015 (1)

0x138e = 5006, while the expected value is 0x7d6 = 2006.

I guess converting this test to the KUnit framework would make it a
bit easier to investigate failures...

[*] Left the debug one running, and I got a few more:

    BUG at check_empty_area_window:2656 (1)
    Pass: 3754275 Run:3754277
    BUG at check_empty_area_window:2657 (1)
    Pass: 3754275 Run:3754278
    BUG at check_empty_area_window:2658 (1)
    Pass: 3754275 Run:3754279
    BUG at check_empty_area_window:2662 (1)
    Pass: 3754275 Run:3754280
    BUG at check_empty_area_window:2663 (1)
    Pass: 3754275 Run:3754281
    maple_tree: 3804518 of 3804524 tests passed

So the full test took more than 20 minutes...

>         MT_BUG_ON(mt, mas.last != ULONG_MAX);
>
>         val = mas_prev(&mas, 0);

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Peng Zhang July 4, 2023, 3:11 p.m. UTC | #2
在 2023/7/3 02:20, Geert Uytterhoeven 写道:
> Hi Liam,
> 
> On Thu, May 18, 2023 at 9:37 PM Liam R. Howlett <Liam.Howlett@oracle.com> wrote:
>> Now that the functions have changed the limits, update the testing of
>> the maple tree to test these new settings.
>>
>> Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
> 
> Thanks for your patch, which is now commit eb2e817f38cafbf7
> ("maple_tree: update testing code for mas_{next,prev,walk}") in
> 
>> --- a/lib/test_maple_tree.c
>> +++ b/lib/test_maple_tree.c
>> @@ -2011,7 +2011,7 @@ static noinline void __init next_prev_test(struct maple_tree *mt)
>>
>>          val = mas_next(&mas, ULONG_MAX);
>>          MT_BUG_ON(mt, val != NULL);
>> -       MT_BUG_ON(mt, mas.index != ULONG_MAX);
>> +       MT_BUG_ON(mt, mas.index != 0x7d6);
> 
> On m68k (ARAnyM):
> 
>      TEST STARTING
> 
>      BUG at next_prev_test:2014 (1)
>      Pass: 3749128 Run:3749129
> 
> And after that it seems to hang[*].
> 
> After adding a debug print (thus shifting all line numbers by +1):
> 
>      next_prev_test:mas.index = 0x138e
>      BUG at next_prev_test:2015 (1)
> 
> 0x138e = 5006, while the expected value is 0x7d6 = 2006.
I took a look. The return value 5006 is correct while the
expected value is wrong. This is a problem with the test,
it is not compatible with 32-bit systems.
> 
> I guess converting this test to the KUnit framework would make it a
> bit easier to investigate failures...
> 
> [*] Left the debug one running, and I got a few more:
> 
>      BUG at check_empty_area_window:2656 (1)
>      Pass: 3754275 Run:3754277
>      BUG at check_empty_area_window:2657 (1)
>      Pass: 3754275 Run:3754278
>      BUG at check_empty_area_window:2658 (1)
>      Pass: 3754275 Run:3754279
>      BUG at check_empty_area_window:2662 (1)
>      Pass: 3754275 Run:3754280
>      BUG at check_empty_area_window:2663 (1)
>      Pass: 3754275 Run:3754281
>      maple_tree: 3804518 of 3804524 tests passed
> 
> So the full test took more than 20 minutes...
> 
>>          MT_BUG_ON(mt, mas.last != ULONG_MAX);
>>
>>          val = mas_prev(&mas, 0);
> 
> Gr{oetje,eeting}s,
> 
>                          Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                  -- Linus Torvalds
Liam R. Howlett July 4, 2023, 3:22 p.m. UTC | #3
* Peng Zhang <zhangpeng.00@bytedance.com> [230704 11:11]:
> 
> 
> 在 2023/7/3 02:20, Geert Uytterhoeven 写道:
> > Hi Liam,
> > 
> > On Thu, May 18, 2023 at 9:37 PM Liam R. Howlett <Liam.Howlett@oracle.com> wrote:
> > > Now that the functions have changed the limits, update the testing of
> > > the maple tree to test these new settings.
> > > 
> > > Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
> > 
> > Thanks for your patch, which is now commit eb2e817f38cafbf7
> > ("maple_tree: update testing code for mas_{next,prev,walk}") in
> > 
> > > --- a/lib/test_maple_tree.c
> > > +++ b/lib/test_maple_tree.c
> > > @@ -2011,7 +2011,7 @@ static noinline void __init next_prev_test(struct maple_tree *mt)
> > > 
> > >          val = mas_next(&mas, ULONG_MAX);
> > >          MT_BUG_ON(mt, val != NULL);
> > > -       MT_BUG_ON(mt, mas.index != ULONG_MAX);
> > > +       MT_BUG_ON(mt, mas.index != 0x7d6);
> > 
> > On m68k (ARAnyM):
> > 
> >      TEST STARTING
> > 
> >      BUG at next_prev_test:2014 (1)
> >      Pass: 3749128 Run:3749129
> > 
> > And after that it seems to hang[*].
> > 
> > After adding a debug print (thus shifting all line numbers by +1):
> > 
> >      next_prev_test:mas.index = 0x138e
> >      BUG at next_prev_test:2015 (1)
> > 
> > 0x138e = 5006, while the expected value is 0x7d6 = 2006.
> I took a look. The return value 5006 is correct while the
> expected value is wrong. This is a problem with the test,
> it is not compatible with 32-bit systems.

Thanks.  There are a number of tests which deal with larger numbers that
do not work for the 32 bit systems.  Those tests are put within an ifdef
to avoid running.  I guess this one will either need to be altered to be
32 bit safe or added to that list.

> > 
> > I guess converting this test to the KUnit framework would make it a
> > bit easier to investigate failures...
> > 
> > [*] Left the debug one running, and I got a few more:
> > 
> >      BUG at check_empty_area_window:2656 (1)
> >      Pass: 3754275 Run:3754277
> >      BUG at check_empty_area_window:2657 (1)
> >      Pass: 3754275 Run:3754278
> >      BUG at check_empty_area_window:2658 (1)
> >      Pass: 3754275 Run:3754279
> >      BUG at check_empty_area_window:2662 (1)
> >      Pass: 3754275 Run:3754280
> >      BUG at check_empty_area_window:2663 (1)
> >      Pass: 3754275 Run:3754281
> >      maple_tree: 3804518 of 3804524 tests passed
> > 
> > So the full test took more than 20 minutes...

There are a large number of test which are probably going to take a long
time to run.  I'm not sure what should be limited to avoid testing
taking a long time on old systems or even what would be acceptable?

> > 
> > >          MT_BUG_ON(mt, mas.last != ULONG_MAX);
> > > 
> > >          val = mas_prev(&mas, 0);
> > 
> > Gr{oetje,eeting}s,
> > 
> >                          Geert
> > 
> > --
> > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
> > 
> > In personal conversations with technical people, I call myself a hacker. But
> > when I'm talking to journalists I just say "programmer" or something like that.
> >                                  -- Linus Torvalds
Liam R. Howlett July 7, 2023, 7:28 p.m. UTC | #4
* Liam R. Howlett <Liam.Howlett@Oracle.com> [230704 11:22]:
> * Peng Zhang <zhangpeng.00@bytedance.com> [230704 11:11]:
> > 
> > 
> > 在 2023/7/3 02:20, Geert Uytterhoeven 写道:
> > > Hi Liam,
> > > 
> > > On Thu, May 18, 2023 at 9:37 PM Liam R. Howlett <Liam.Howlett@oracle.com> wrote:
> > > > Now that the functions have changed the limits, update the testing of
> > > > the maple tree to test these new settings.
> > > > 
> > > > Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
> > > 
> > > Thanks for your patch, which is now commit eb2e817f38cafbf7
> > > ("maple_tree: update testing code for mas_{next,prev,walk}") in
> > > 
> > > > --- a/lib/test_maple_tree.c
> > > > +++ b/lib/test_maple_tree.c
> > > > @@ -2011,7 +2011,7 @@ static noinline void __init next_prev_test(struct maple_tree *mt)
> > > > 
> > > >          val = mas_next(&mas, ULONG_MAX);
> > > >          MT_BUG_ON(mt, val != NULL);
> > > > -       MT_BUG_ON(mt, mas.index != ULONG_MAX);
> > > > +       MT_BUG_ON(mt, mas.index != 0x7d6);
> > > 
> > > On m68k (ARAnyM):
> > > 
> > >      TEST STARTING
> > > 
> > >      BUG at next_prev_test:2014 (1)
> > >      Pass: 3749128 Run:3749129
> > > 
> > > And after that it seems to hang[*].
> > > 
> > > After adding a debug print (thus shifting all line numbers by +1):
> > > 
> > >      next_prev_test:mas.index = 0x138e
> > >      BUG at next_prev_test:2015 (1)
> > > 
> > > 0x138e = 5006, while the expected value is 0x7d6 = 2006.
> > I took a look. The return value 5006 is correct while the
> > expected value is wrong. This is a problem with the test,
> > it is not compatible with 32-bit systems.
> 
> Thanks.  There are a number of tests which deal with larger numbers that
> do not work for the 32 bit systems.  Those tests are put within an ifdef
> to avoid running.  I guess this one will either need to be altered to be
> 32 bit safe or added to that list.

This test should work on 32 bit systems.  The problem is that the test
sets up different size trees for 32 and 64 bit systems so that there are
at least two levels in the tree.  The test that fails checks what
happens when we shift off the end of a tree - which differs depending on
the number of entries needed to create a two level tree.

I have a fix for this test, but I will hold off until I test in a VM to
see the issue below.

> 
> > > 
> > > I guess converting this test to the KUnit framework would make it a
> > > bit easier to investigate failures...

I disagree, I can see the above failure in userspace on 64 bit systems
by running the following in tools/testing/radix-tree:

BUILD=32 CC=gcc make maple && LSAN_OPTIONS="report_objects=1" ./maple

In fact, that tests more than the module as it will run RCU testing as
well as using direct tree accesses for another set of tests, which
revealed another test is also failing for 32 bit around allocating
nodes.  I also have a fix for this now, but again, I'll hold off sending
them out until I see the below failures.

> > > 
> > > [*] Left the debug one running, and I got a few more:
> > > 
> > >      BUG at check_empty_area_window:2656 (1)
> > >      Pass: 3754275 Run:3754277
> > >      BUG at check_empty_area_window:2657 (1)
> > >      Pass: 3754275 Run:3754278
> > >      BUG at check_empty_area_window:2658 (1)
> > >      Pass: 3754275 Run:3754279
> > >      BUG at check_empty_area_window:2662 (1)
> > >      Pass: 3754275 Run:3754280
> > >      BUG at check_empty_area_window:2663 (1)
> > >      Pass: 3754275 Run:3754281
> > >      maple_tree: 3804518 of 3804524 tests passed
> > > 
> > > So the full test took more than 20 minutes...
> 
> There are a large number of test which are probably going to take a long
> time to run.  I'm not sure what should be limited to avoid testing
> taking a long time on old systems or even what would be acceptable?
> 

I'll look for these failures, perhaps on i386 so I can have them run at
a reasonable speed.

Thanks again for reporting this issue.  We should be more careful with
32 bit testing in future updates.

Regards,
Liam
Liam R. Howlett July 10, 2023, 3:03 p.m. UTC | #5
* Liam R. Howlett <Liam.Howlett@Oracle.com> [230707 15:28]:
> * Liam R. Howlett <Liam.Howlett@Oracle.com> [230704 11:22]:
> > * Peng Zhang <zhangpeng.00@bytedance.com> [230704 11:11]:
> > > 
> > > 
> > > 在 2023/7/3 02:20, Geert Uytterhoeven 写道:
> > > > Hi Liam,
> > > > 
> > > > On Thu, May 18, 2023 at 9:37 PM Liam R. Howlett <Liam.Howlett@oracle.com> wrote:
> > > > > Now that the functions have changed the limits, update the testing of
> > > > > the maple tree to test these new settings.
> > > > > 
> > > > > Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
> > > > 
> > > > Thanks for your patch, which is now commit eb2e817f38cafbf7
> > > > ("maple_tree: update testing code for mas_{next,prev,walk}") in
> > > > 
> > > > > --- a/lib/test_maple_tree.c
> > > > > +++ b/lib/test_maple_tree.c
> > > > > @@ -2011,7 +2011,7 @@ static noinline void __init next_prev_test(struct maple_tree *mt)
> > > > > 
> > > > >          val = mas_next(&mas, ULONG_MAX);
> > > > >          MT_BUG_ON(mt, val != NULL);
> > > > > -       MT_BUG_ON(mt, mas.index != ULONG_MAX);
> > > > > +       MT_BUG_ON(mt, mas.index != 0x7d6);
> > > > 
> > > > On m68k (ARAnyM):
> > > > 
> > > >      TEST STARTING
> > > > 
> > > >      BUG at next_prev_test:2014 (1)
> > > >      Pass: 3749128 Run:3749129
> > > > 
> > > > And after that it seems to hang[*].
> > > > 
> > > > After adding a debug print (thus shifting all line numbers by +1):
> > > > 
> > > >      next_prev_test:mas.index = 0x138e
> > > >      BUG at next_prev_test:2015 (1)
> > > > 
> > > > 0x138e = 5006, while the expected value is 0x7d6 = 2006.
> > > I took a look. The return value 5006 is correct while the
> > > expected value is wrong. This is a problem with the test,
> > > it is not compatible with 32-bit systems.
> > 
> > Thanks.  There are a number of tests which deal with larger numbers that
> > do not work for the 32 bit systems.  Those tests are put within an ifdef
> > to avoid running.  I guess this one will either need to be altered to be
> > 32 bit safe or added to that list.
> 
> This test should work on 32 bit systems.  The problem is that the test
> sets up different size trees for 32 and 64 bit systems so that there are
> at least two levels in the tree.  The test that fails checks what
> happens when we shift off the end of a tree - which differs depending on
> the number of entries needed to create a two level tree.
> 
> I have a fix for this test, but I will hold off until I test in a VM to
> see the issue below.
> 
> > 
> > > > 
> > > > I guess converting this test to the KUnit framework would make it a
> > > > bit easier to investigate failures...
> 
> I disagree, I can see the above failure in userspace on 64 bit systems
> by running the following in tools/testing/radix-tree:
> 
> BUILD=32 CC=gcc make maple && LSAN_OPTIONS="report_objects=1" ./maple
> 
> In fact, that tests more than the module as it will run RCU testing as
> well as using direct tree accesses for another set of tests, which
> revealed another test is also failing for 32 bit around allocating
> nodes.  I also have a fix for this now, but again, I'll hold off sending
> them out until I see the below failures.
> 
> > > > 
> > > > [*] Left the debug one running, and I got a few more:
> > > > 
> > > >      BUG at check_empty_area_window:2656 (1)
> > > >      Pass: 3754275 Run:3754277
> > > >      BUG at check_empty_area_window:2657 (1)
> > > >      Pass: 3754275 Run:3754278
> > > >      BUG at check_empty_area_window:2658 (1)
> > > >      Pass: 3754275 Run:3754279
> > > >      BUG at check_empty_area_window:2662 (1)
> > > >      Pass: 3754275 Run:3754280
> > > >      BUG at check_empty_area_window:2663 (1)
> > > >      Pass: 3754275 Run:3754281
> > > >      maple_tree: 3804518 of 3804524 tests passed
> > > > 
> > > > So the full test took more than 20 minutes...
> > 
> > There are a large number of test which are probably going to take a long
> > time to run.  I'm not sure what should be limited to avoid testing
> > taking a long time on old systems or even what would be acceptable?
> > 
> 
> I'll look for these failures, perhaps on i386 so I can have them run at
> a reasonable speed.

The check_empty_area_window issue did not show up on i386.  I was able
to reproduce it with qemu m68k nommu build.  It seems that there is a
bug in mas_rev_awalk() where mas_logical_pivot() should be used instead
of mas_safe_pivot().

It's a simple one line fix, but Peng already has a change in-flight that
will fix it by always setting the pivot and render mas_logical_pivot()
useless.

I'm going to reply to Peng's patch to amend the change log and add a Cc
stable.

The remainder of the failures you reported here will be fixed through
akpm's branch as fixes to the maple tree testing.

Thanks again, Geert for catching these issues.

Thanks,
Liam
diff mbox series

Patch

diff --git a/lib/test_maple_tree.c b/lib/test_maple_tree.c
index d295fdee2fae..9939be34e516 100644
--- a/lib/test_maple_tree.c
+++ b/lib/test_maple_tree.c
@@ -1322,6 +1322,7 @@  static noinline void __init check_root_expand(struct maple_tree *mt)
 	mas_lock(&mas);
 	mas_set(&mas, 3);
 	ptr = mas_walk(&mas);
+	MT_BUG_ON(mt, mas.index != 0);
 	MT_BUG_ON(mt, ptr != NULL);
 	MT_BUG_ON(mt, mas.index != 0);
 	MT_BUG_ON(mt, mas.last != ULONG_MAX);
@@ -1391,7 +1392,7 @@  static noinline void __init check_root_expand(struct maple_tree *mt)
 	mas_store_gfp(&mas, ptr, GFP_KERNEL);
 	ptr = mas_next(&mas, ULONG_MAX);
 	MT_BUG_ON(mt, ptr != NULL);
-	MT_BUG_ON(mt, (mas.index != 1) && (mas.last != ULONG_MAX));
+	MT_BUG_ON(mt, (mas.index != ULONG_MAX) && (mas.last != ULONG_MAX));
 
 	mas_set(&mas, 1);
 	ptr = mas_prev(&mas, 0);
@@ -1800,7 +1801,6 @@  static noinline void __init check_iteration(struct maple_tree *mt)
 			mas.index = 760;
 			mas.last = 765;
 			mas_store(&mas, val);
-			mas_next(&mas, ULONG_MAX);
 		}
 		i++;
 	}
@@ -2011,7 +2011,7 @@  static noinline void __init next_prev_test(struct maple_tree *mt)
 
 	val = mas_next(&mas, ULONG_MAX);
 	MT_BUG_ON(mt, val != NULL);
-	MT_BUG_ON(mt, mas.index != ULONG_MAX);
+	MT_BUG_ON(mt, mas.index != 0x7d6);
 	MT_BUG_ON(mt, mas.last != ULONG_MAX);
 
 	val = mas_prev(&mas, 0);
@@ -2035,7 +2035,8 @@  static noinline void __init next_prev_test(struct maple_tree *mt)
 	val = mas_prev(&mas, 0);
 	MT_BUG_ON(mt, val != NULL);
 	MT_BUG_ON(mt, mas.index != 0);
-	MT_BUG_ON(mt, mas.last != 0);
+	MT_BUG_ON(mt, mas.last != 5);
+	MT_BUG_ON(mt, mas.node != MAS_NONE);
 
 	mas.index = 0;
 	mas.last = 5;
@@ -2047,7 +2048,7 @@  static noinline void __init next_prev_test(struct maple_tree *mt)
 	val = mas_prev(&mas, 0);
 	MT_BUG_ON(mt, val != NULL);
 	MT_BUG_ON(mt, mas.index != 0);
-	MT_BUG_ON(mt, mas.last != 0);
+	MT_BUG_ON(mt, mas.last != 9);
 	mas_unlock(&mas);
 
 	mtree_destroy(mt);
@@ -2750,6 +2751,629 @@  static noinline void __init check_empty_area_fill(struct maple_tree *mt)
 	mt_set_non_kernel(0);
 }
 
+/*
+ * Check MAS_START, MAS_PAUSE, active (implied), and MAS_NONE transitions.
+ *
+ * The table below shows the single entry tree (0-0 pointer) and normal tree
+ * with nodes.
+ *
+ * Function	ENTRY	Start		Result		index & last
+ *     ┬          ┬       ┬               ┬                ┬
+ *     │          │       │               │                └─ the final range
+ *     │          │       │               └─ The node value after execution
+ *     │          │       └─ The node value before execution
+ *     │          └─ If the entry exists or does not exists (DNE)
+ *     └─ The function name
+ *
+ * Function	ENTRY	Start		Result		index & last
+ * mas_next()
+ *  - after last
+ *			Single entry tree at 0-0
+ *			------------------------
+ *		DNE	MAS_START	MAS_NONE	1 - oo
+ *		DNE	MAS_PAUSE	MAS_NONE	1 - oo
+ *		DNE	MAS_ROOT	MAS_NONE	1 - oo
+ *			when index = 0
+ *		DNE	MAS_NONE	MAS_ROOT	0
+ *			when index > 0
+ *		DNE	MAS_NONE	MAS_NONE	1 - oo
+ *
+ *			Normal tree
+ *			-----------
+ *		exists	MAS_START	active		range
+ *		DNE	MAS_START	active		set to last range
+ *		exists	MAS_PAUSE	active		range
+ *		DNE	MAS_PAUSE	active		set to last range
+ *		exists	MAS_NONE	active		range
+ *		exists	active		active		range
+ *		DNE	active		active		set to last range
+ *
+ * Function	ENTRY	Start		Result		index & last
+ * mas_prev()
+ * - before index
+ *			Single entry tree at 0-0
+ *			------------------------
+ *				if index > 0
+ *		exists	MAS_START	MAS_ROOT	0
+ *		exists	MAS_PAUSE	MAS_ROOT	0
+ *		exists	MAS_NONE	MAS_ROOT	0
+ *
+ *				if index == 0
+ *		DNE	MAS_START	MAS_NONE	0
+ *		DNE	MAS_PAUSE	MAS_NONE	0
+ *		DNE	MAS_NONE	MAS_NONE	0
+ *		DNE	MAS_ROOT	MAS_NONE	0
+ *
+ *			Normal tree
+ *			-----------
+ *		exists	MAS_START	active		range
+ *		DNE	MAS_START	active		set to min
+ *		exists	MAS_PAUSE	active		range
+ *		DNE	MAS_PAUSE	active		set to min
+ *		exists	MAS_NONE	active		range
+ *		DNE	MAS_NONE	MAS_NONE	set to min
+ *		any	MAS_ROOT	MAS_NONE	0
+ *		exists	active		active		range
+ *		DNE	active		active		last range
+ *
+ * Function	ENTRY	Start		Result		index & last
+ * mas_find()
+ *  - at index or next
+ *			Single entry tree at 0-0
+ *			------------------------
+ *				if index >  0
+ *		DNE	MAS_START	MAS_NONE	0
+ *		DNE	MAS_PAUSE	MAS_NONE	0
+ *		DNE	MAS_ROOT	MAS_NONE	0
+ *		DNE	MAS_NONE	MAS_NONE	0
+ *				if index ==  0
+ *		exists	MAS_START	MAS_ROOT	0
+ *		exists	MAS_PAUSE	MAS_ROOT	0
+ *		exists	MAS_NONE	MAS_ROOT	0
+ *
+ *			Normal tree
+ *			-----------
+ *		exists	MAS_START	active		range
+ *		DNE	MAS_START	active		set to max
+ *		exists	MAS_PAUSE	active		range
+ *		DNE	MAS_PAUSE	active		set to max
+ *		exists	MAS_NONE	active		range
+ *		exists	active		active		range
+ *		DNE	active		active		last range (max < last)
+ *
+ * Function	ENTRY	Start		Result		index & last
+ * mas_find_rev()
+ *  - at index or before
+ *			Single entry tree at 0-0
+ *			------------------------
+ *				if index >  0
+ *		exists	MAS_START	MAS_ROOT	0
+ *		exists	MAS_PAUSE	MAS_ROOT	0
+ *		exists	MAS_NONE	MAS_ROOT	0
+ *				if index ==  0
+ *		DNE	MAS_START	MAS_NONE	0
+ *		DNE	MAS_PAUSE	MAS_NONE	0
+ *		DNE	MAS_NONE	MAS_NONE	0
+ *		DNE	MAS_ROOT	MAS_NONE	0
+ *
+ *			Normal tree
+ *			-----------
+ *		exists	MAS_START	active		range
+ *		DNE	MAS_START	active		set to min
+ *		exists	MAS_PAUSE	active		range
+ *		DNE	MAS_PAUSE	active		set to min
+ *		exists	MAS_NONE	active		range
+ *		exists	active		active		range
+ *		DNE	active		active		last range (min > index)
+ *
+ * Function	ENTRY	Start		Result		index & last
+ * mas_walk()
+ * - Look up index
+ *			Single entry tree at 0-0
+ *			------------------------
+ *				if index >  0
+ *		DNE	MAS_START	MAS_ROOT	1 - oo
+ *		DNE	MAS_PAUSE	MAS_ROOT	1 - oo
+ *		DNE	MAS_NONE	MAS_ROOT	1 - oo
+ *		DNE	MAS_ROOT	MAS_ROOT	1 - oo
+ *				if index ==  0
+ *		exists	MAS_START	MAS_ROOT	0
+ *		exists	MAS_PAUSE	MAS_ROOT	0
+ *		exists	MAS_NONE	MAS_ROOT	0
+ *		exists	MAS_ROOT	MAS_ROOT	0
+ *
+ *			Normal tree
+ *			-----------
+ *		exists	MAS_START	active		range
+ *		DNE	MAS_START	active		range of NULL
+ *		exists	MAS_PAUSE	active		range
+ *		DNE	MAS_PAUSE	active		range of NULL
+ *		exists	MAS_NONE	active		range
+ *		DNE	MAS_NONE	active		range of NULL
+ *		exists	active		active		range
+ *		DNE	active		active		range of NULL
+ */
+
+#define mas_active(x)		(((x).node != MAS_ROOT) && \
+				 ((x).node != MAS_START) && \
+				 ((x).node != MAS_PAUSE) && \
+				 ((x).node != MAS_NONE))
+static noinline void __init check_state_handling(struct maple_tree *mt)
+{
+	MA_STATE(mas, mt, 0, 0);
+	void *entry, *ptr = (void *) 0x1234500;
+	void *ptr2 = &ptr;
+	void *ptr3 = &ptr2;
+
+	/* Check MAS_ROOT First */
+	mtree_store_range(mt, 0, 0, ptr, GFP_KERNEL);
+
+	mas_lock(&mas);
+	/* prev: Start -> none */
+	entry = mas_prev(&mas, 0);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.node != MAS_NONE);
+
+	/* prev: Start -> root */
+	mas_set(&mas, 10);
+	entry = mas_prev(&mas, 0);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0);
+	MT_BUG_ON(mt, mas.last != 0);
+	MT_BUG_ON(mt, mas.node != MAS_ROOT);
+
+	/* prev: pause -> root */
+	mas_set(&mas, 10);
+	mas_pause(&mas);
+	entry = mas_prev(&mas, 0);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0);
+	MT_BUG_ON(mt, mas.last != 0);
+	MT_BUG_ON(mt, mas.node != MAS_ROOT);
+
+	/* next: start -> none */
+	mas_set(&mas, 0);
+	entry = mas_next(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, mas.index != 1);
+	MT_BUG_ON(mt, mas.last != ULONG_MAX);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.node != MAS_NONE);
+
+	/* next: start -> none */
+	mas_set(&mas, 10);
+	entry = mas_next(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, mas.index != 1);
+	MT_BUG_ON(mt, mas.last != ULONG_MAX);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.node != MAS_NONE);
+
+	/* find: start -> root */
+	mas_set(&mas, 0);
+	entry = mas_find(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0);
+	MT_BUG_ON(mt, mas.last != 0);
+	MT_BUG_ON(mt, mas.node != MAS_ROOT);
+
+	/* find: root -> none */
+	entry = mas_find(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 1);
+	MT_BUG_ON(mt, mas.last != ULONG_MAX);
+	MT_BUG_ON(mt, mas.node != MAS_NONE);
+
+	/* find: none -> none */
+	entry = mas_find(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 1);
+	MT_BUG_ON(mt, mas.last != ULONG_MAX);
+	MT_BUG_ON(mt, mas.node != MAS_NONE);
+
+	/* find: start -> none */
+	mas_set(&mas, 10);
+	entry = mas_find(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 1);
+	MT_BUG_ON(mt, mas.last != ULONG_MAX);
+	MT_BUG_ON(mt, mas.node != MAS_NONE);
+
+	/* find_rev: none -> root */
+	entry = mas_find_rev(&mas, 0);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0);
+	MT_BUG_ON(mt, mas.last != 0);
+	MT_BUG_ON(mt, mas.node != MAS_ROOT);
+
+	/* find_rev: start -> root */
+	mas_set(&mas, 0);
+	entry = mas_find_rev(&mas, 0);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0);
+	MT_BUG_ON(mt, mas.last != 0);
+	MT_BUG_ON(mt, mas.node != MAS_ROOT);
+
+	/* find_rev: root -> none */
+	entry = mas_find_rev(&mas, 0);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 0);
+	MT_BUG_ON(mt, mas.last != 0);
+	MT_BUG_ON(mt, mas.node != MAS_NONE);
+
+	/* find_rev: none -> none */
+	entry = mas_find_rev(&mas, 0);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 0);
+	MT_BUG_ON(mt, mas.last != 0);
+	MT_BUG_ON(mt, mas.node != MAS_NONE);
+
+	/* find_rev: start -> root */
+	mas_set(&mas, 10);
+	entry = mas_find_rev(&mas, 0);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0);
+	MT_BUG_ON(mt, mas.last != 0);
+	MT_BUG_ON(mt, mas.node != MAS_ROOT);
+
+	/* walk: start -> none */
+	mas_set(&mas, 10);
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 1);
+	MT_BUG_ON(mt, mas.last != ULONG_MAX);
+	MT_BUG_ON(mt, mas.node != MAS_NONE);
+
+	/* walk: pause -> none*/
+	mas_set(&mas, 10);
+	mas_pause(&mas);
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 1);
+	MT_BUG_ON(mt, mas.last != ULONG_MAX);
+	MT_BUG_ON(mt, mas.node != MAS_NONE);
+
+	/* walk: none -> none */
+	mas.index = mas.last = 10;
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 1);
+	MT_BUG_ON(mt, mas.last != ULONG_MAX);
+	MT_BUG_ON(mt, mas.node != MAS_NONE);
+
+	/* walk: none -> none */
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 1);
+	MT_BUG_ON(mt, mas.last != ULONG_MAX);
+	MT_BUG_ON(mt, mas.node != MAS_NONE);
+
+	/* walk: start -> root */
+	mas_set(&mas, 0);
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0);
+	MT_BUG_ON(mt, mas.last != 0);
+	MT_BUG_ON(mt, mas.node != MAS_ROOT);
+
+	/* walk: pause -> root */
+	mas_set(&mas, 0);
+	mas_pause(&mas);
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0);
+	MT_BUG_ON(mt, mas.last != 0);
+	MT_BUG_ON(mt, mas.node != MAS_ROOT);
+
+	/* walk: none -> root */
+	mas.node = MAS_NONE;
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0);
+	MT_BUG_ON(mt, mas.last != 0);
+	MT_BUG_ON(mt, mas.node != MAS_ROOT);
+
+	/* walk: root -> root */
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0);
+	MT_BUG_ON(mt, mas.last != 0);
+	MT_BUG_ON(mt, mas.node != MAS_ROOT);
+
+	/* walk: root -> none */
+	mas_set(&mas, 10);
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 1);
+	MT_BUG_ON(mt, mas.last != ULONG_MAX);
+	MT_BUG_ON(mt, mas.node != MAS_NONE);
+
+	/* walk: none -> root */
+	mas.index = mas.last = 0;
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0);
+	MT_BUG_ON(mt, mas.last != 0);
+	MT_BUG_ON(mt, mas.node != MAS_ROOT);
+
+	mas_unlock(&mas);
+
+	/* Check when there is an actual node */
+	mtree_store_range(mt, 0, 0, NULL, GFP_KERNEL);
+	mtree_store_range(mt, 0x1000, 0x1500, ptr, GFP_KERNEL);
+	mtree_store_range(mt, 0x2000, 0x2500, ptr2, GFP_KERNEL);
+	mtree_store_range(mt, 0x3000, 0x3500, ptr3, GFP_KERNEL);
+
+	mas_lock(&mas);
+
+	/* next: start ->active */
+	mas_set(&mas, 0);
+	entry = mas_next(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0x1000);
+	MT_BUG_ON(mt, mas.last != 0x1500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* next: pause ->active */
+	mas_set(&mas, 0);
+	mas_pause(&mas);
+	entry = mas_next(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0x1000);
+	MT_BUG_ON(mt, mas.last != 0x1500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* next: none ->active */
+	mas.index = mas.last = 0;
+	mas.offset = 0;
+	mas.node = MAS_NONE;
+	entry = mas_next(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0x1000);
+	MT_BUG_ON(mt, mas.last != 0x1500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* next:active ->active */
+	entry = mas_next(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != ptr2);
+	MT_BUG_ON(mt, mas.index != 0x2000);
+	MT_BUG_ON(mt, mas.last != 0x2500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* next:active -> active out of range*/
+	entry = mas_next(&mas, 0x2999);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 0x2501);
+	MT_BUG_ON(mt, mas.last != 0x2fff);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* Continue after out of range*/
+	entry = mas_next(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != ptr3);
+	MT_BUG_ON(mt, mas.index != 0x3000);
+	MT_BUG_ON(mt, mas.last != 0x3500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* next:active -> active out of range*/
+	entry = mas_next(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 0x3501);
+	MT_BUG_ON(mt, mas.last != ULONG_MAX);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* next: none -> active, skip value at location */
+	mas_set(&mas, 0);
+	entry = mas_next(&mas, ULONG_MAX);
+	mas.node = MAS_NONE;
+	mas.offset = 0;
+	entry = mas_next(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != ptr2);
+	MT_BUG_ON(mt, mas.index != 0x2000);
+	MT_BUG_ON(mt, mas.last != 0x2500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* prev:active ->active */
+	entry = mas_prev(&mas, 0);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0x1000);
+	MT_BUG_ON(mt, mas.last != 0x1500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* prev:active -> active out of range*/
+	entry = mas_prev(&mas, 0);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 0);
+	MT_BUG_ON(mt, mas.last != 0x0FFF);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* prev: pause ->active */
+	mas_set(&mas, 0x3600);
+	entry = mas_prev(&mas, 0);
+	MT_BUG_ON(mt, entry != ptr3);
+	mas_pause(&mas);
+	entry = mas_prev(&mas, 0);
+	MT_BUG_ON(mt, entry != ptr2);
+	MT_BUG_ON(mt, mas.index != 0x2000);
+	MT_BUG_ON(mt, mas.last != 0x2500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* prev:active -> active out of range*/
+	entry = mas_prev(&mas, 0x1600);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 0x1501);
+	MT_BUG_ON(mt, mas.last != 0x1FFF);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* prev: active ->active, continue*/
+	entry = mas_prev(&mas, 0);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0x1000);
+	MT_BUG_ON(mt, mas.last != 0x1500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* find: start ->active */
+	mas_set(&mas, 0);
+	entry = mas_find(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0x1000);
+	MT_BUG_ON(mt, mas.last != 0x1500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* find: pause ->active */
+	mas_set(&mas, 0);
+	mas_pause(&mas);
+	entry = mas_find(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0x1000);
+	MT_BUG_ON(mt, mas.last != 0x1500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* find: start ->active on value */;
+	mas_set(&mas, 1200);
+	entry = mas_find(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0x1000);
+	MT_BUG_ON(mt, mas.last != 0x1500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* find:active ->active */
+	entry = mas_find(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != ptr2);
+	MT_BUG_ON(mt, mas.index != 0x2000);
+	MT_BUG_ON(mt, mas.last != 0x2500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+
+	/* find:active -> active (NULL)*/
+	entry = mas_find(&mas, 0x2700);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 0x2501);
+	MT_BUG_ON(mt, mas.last != 0x2FFF);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* find: none ->active */
+	entry = mas_find(&mas, 0x5000);
+	MT_BUG_ON(mt, entry != ptr3);
+	MT_BUG_ON(mt, mas.index != 0x3000);
+	MT_BUG_ON(mt, mas.last != 0x3500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* find:active -> active (NULL) end*/
+	entry = mas_find(&mas, ULONG_MAX);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 0x3501);
+	MT_BUG_ON(mt, mas.last != ULONG_MAX);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* find_rev: active (END) ->active */
+	entry = mas_find_rev(&mas, 0);
+	MT_BUG_ON(mt, entry != ptr3);
+	MT_BUG_ON(mt, mas.index != 0x3000);
+	MT_BUG_ON(mt, mas.last != 0x3500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* find_rev:active ->active */
+	entry = mas_find_rev(&mas, 0);
+	MT_BUG_ON(mt, entry != ptr2);
+	MT_BUG_ON(mt, mas.index != 0x2000);
+	MT_BUG_ON(mt, mas.last != 0x2500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* find_rev: pause ->active */
+	mas_pause(&mas);
+	entry = mas_find_rev(&mas, 0);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0x1000);
+	MT_BUG_ON(mt, mas.last != 0x1500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* find_rev:active -> active */
+	entry = mas_find_rev(&mas, 0);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 0);
+	MT_BUG_ON(mt, mas.last != 0x0FFF);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* find_rev: start ->active */
+	mas_set(&mas, 0x1200);
+	entry = mas_find_rev(&mas, 0);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0x1000);
+	MT_BUG_ON(mt, mas.last != 0x1500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* mas_walk start ->active */
+	mas_set(&mas, 0x1200);
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0x1000);
+	MT_BUG_ON(mt, mas.last != 0x1500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* mas_walk start ->active */
+	mas_set(&mas, 0x1600);
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 0x1501);
+	MT_BUG_ON(mt, mas.last != 0x1fff);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* mas_walk pause ->active */
+	mas_set(&mas, 0x1200);
+	mas_pause(&mas);
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0x1000);
+	MT_BUG_ON(mt, mas.last != 0x1500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* mas_walk pause -> active */
+	mas_set(&mas, 0x1600);
+	mas_pause(&mas);
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 0x1501);
+	MT_BUG_ON(mt, mas.last != 0x1fff);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* mas_walk none -> active */
+	mas_set(&mas, 0x1200);
+	mas.node = MAS_NONE;
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0x1000);
+	MT_BUG_ON(mt, mas.last != 0x1500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* mas_walk none -> active */
+	mas_set(&mas, 0x1600);
+	mas.node = MAS_NONE;
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 0x1501);
+	MT_BUG_ON(mt, mas.last != 0x1fff);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* mas_walk active -> active */
+	mas.index = 0x1200;
+	mas.last = 0x1200;
+	mas.offset = 0;
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != ptr);
+	MT_BUG_ON(mt, mas.index != 0x1000);
+	MT_BUG_ON(mt, mas.last != 0x1500);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	/* mas_walk active -> active */
+	mas.index = 0x1600;
+	mas.last = 0x1600;
+	entry = mas_walk(&mas);
+	MT_BUG_ON(mt, entry != NULL);
+	MT_BUG_ON(mt, mas.index != 0x1501);
+	MT_BUG_ON(mt, mas.last != 0x1fff);
+	MT_BUG_ON(mt, !mas_active(mas));
+
+	mas_unlock(&mas);
+}
+
 static DEFINE_MTREE(tree);
 static int __init maple_tree_seed(void)
 {
@@ -3011,6 +3635,10 @@  static int __init maple_tree_seed(void)
 	mtree_destroy(&tree);
 
 
+	mt_init_flags(&tree, MT_FLAGS_ALLOC_RANGE);
+	check_state_handling(&tree);
+	mtree_destroy(&tree);
+
 #if defined(BENCH)
 skip:
 #endif