| Message ID | 20230705110039.231148-1-fbarrat@linux.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | pnv/xive: Print CPU target in all TIMA traces | expand |
On 5/7/23 13:00, Frederic Barrat wrote: > Add the CPU target in the trace when reading/writing the TIMA > space. It was already done for other TIMA ops (notify, accept, ...), > only missing for those 2. Useful for debug and even more now that we > experiment with SMT. > > Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> > --- > hw/intc/trace-events | 4 ++-- > hw/intc/xive.c | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/hw/intc/trace-events b/hw/intc/trace-events > index 5c6094c457..36ff71f947 100644 > --- a/hw/intc/trace-events > +++ b/hw/intc/trace-events > @@ -265,8 +265,8 @@ xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64 > xive_source_esb_write(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64 > xive_router_end_notify(uint8_t end_blk, uint32_t end_idx, uint32_t end_data) "END 0x%02x/0x%04x -> enqueue 0x%08x" > xive_router_end_escalate(uint8_t end_blk, uint32_t end_idx, uint8_t esc_blk, uint32_t esc_idx, uint32_t end_data) "END 0x%02x/0x%04x -> escalate END 0x%02x/0x%04x data 0x%08x" > -xive_tctx_tm_write(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 > -xive_tctx_tm_read(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 > +xive_tctx_tm_write(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 > +xive_tctx_tm_read(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 "target" is kinda confusing, what about: xive_tctx_tm_read(uint32_t cpu_index, ...) "cpu=%d @0x%"PRIx64" ... ?
On 7/5/23 13:00, Frederic Barrat wrote: > Add the CPU target in the trace when reading/writing the TIMA > space. It was already done for other TIMA ops (notify, accept, ...), > only missing for those 2. Useful for debug and even more now that we > experiment with SMT. > > Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Thanks, C. > --- > hw/intc/trace-events | 4 ++-- > hw/intc/xive.c | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/hw/intc/trace-events b/hw/intc/trace-events > index 5c6094c457..36ff71f947 100644 > --- a/hw/intc/trace-events > +++ b/hw/intc/trace-events > @@ -265,8 +265,8 @@ xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64 > xive_source_esb_write(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64 > xive_router_end_notify(uint8_t end_blk, uint32_t end_idx, uint32_t end_data) "END 0x%02x/0x%04x -> enqueue 0x%08x" > xive_router_end_escalate(uint8_t end_blk, uint32_t end_idx, uint8_t esc_blk, uint32_t esc_idx, uint32_t end_data) "END 0x%02x/0x%04x -> escalate END 0x%02x/0x%04x data 0x%08x" > -xive_tctx_tm_write(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 > -xive_tctx_tm_read(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 > +xive_tctx_tm_write(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 > +xive_tctx_tm_read(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 > xive_presenter_notify(uint8_t nvt_blk, uint32_t nvt_idx, uint8_t ring) "found NVT 0x%x/0x%x ring=0x%x" > xive_end_source_read(uint8_t end_blk, uint32_t end_idx, uint64_t addr) "END 0x%x/0x%x @0x%"PRIx64 > > diff --git a/hw/intc/xive.c b/hw/intc/xive.c > index c014e961a4..56670b2cac 100644 > --- a/hw/intc/xive.c > +++ b/hw/intc/xive.c > @@ -566,7 +566,7 @@ void xive_tctx_tm_write(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset, > { > const XiveTmOp *xto; > > - trace_xive_tctx_tm_write(offset, size, value); > + trace_xive_tctx_tm_write(tctx->cs->cpu_index, offset, size, value); > > /* > * TODO: check V bit in Q[0-3]W2 > @@ -639,7 +639,7 @@ uint64_t xive_tctx_tm_read(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset, > */ > ret = xive_tm_raw_read(tctx, offset, size); > out: > - trace_xive_tctx_tm_read(offset, size, ret); > + trace_xive_tctx_tm_read(tctx->cs->cpu_index, offset, size, ret); > return ret; > } >
On 7/5/23 13:12, Philippe Mathieu-Daudé wrote: > On 5/7/23 13:00, Frederic Barrat wrote: >> Add the CPU target in the trace when reading/writing the TIMA >> space. It was already done for other TIMA ops (notify, accept, ...), >> only missing for those 2. Useful for debug and even more now that we >> experiment with SMT. >> >> Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> >> --- >> hw/intc/trace-events | 4 ++-- >> hw/intc/xive.c | 4 ++-- >> 2 files changed, 4 insertions(+), 4 deletions(-) >> >> diff --git a/hw/intc/trace-events b/hw/intc/trace-events >> index 5c6094c457..36ff71f947 100644 >> --- a/hw/intc/trace-events >> +++ b/hw/intc/trace-events >> @@ -265,8 +265,8 @@ xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64 >> xive_source_esb_write(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64 >> xive_router_end_notify(uint8_t end_blk, uint32_t end_idx, uint32_t end_data) "END 0x%02x/0x%04x -> enqueue 0x%08x" >> xive_router_end_escalate(uint8_t end_blk, uint32_t end_idx, uint8_t esc_blk, uint32_t esc_idx, uint32_t end_data) "END 0x%02x/0x%04x -> escalate END 0x%02x/0x%04x data 0x%08x" >> -xive_tctx_tm_write(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 >> -xive_tctx_tm_read(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 >> +xive_tctx_tm_write(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 >> +xive_tctx_tm_read(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 > > "target" is kinda confusing, what about: > > xive_tctx_tm_read(uint32_t cpu_index, ...) "cpu=%d @0x%"PRIx64" ... An interrupt 'source' is served by a 'target', a target could be a CPU, a vCPU id, a group of vCPU, a process id. 'target' is part of the XIVE nomenclature, in HW specs, in drivers, FW, Linux, KVM, and models in QEMU. It is fine. Thanks, C. > > ?
On 5/7/23 13:18, Cédric Le Goater wrote: > On 7/5/23 13:12, Philippe Mathieu-Daudé wrote: >> On 5/7/23 13:00, Frederic Barrat wrote: >>> Add the CPU target in the trace when reading/writing the TIMA >>> space. It was already done for other TIMA ops (notify, accept, ...), >>> only missing for those 2. Useful for debug and even more now that we >>> experiment with SMT. >>> >>> Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> >>> --- >>> hw/intc/trace-events | 4 ++-- >>> hw/intc/xive.c | 4 ++-- >>> 2 files changed, 4 insertions(+), 4 deletions(-) >>> >>> diff --git a/hw/intc/trace-events b/hw/intc/trace-events >>> index 5c6094c457..36ff71f947 100644 >>> --- a/hw/intc/trace-events >>> +++ b/hw/intc/trace-events >>> @@ -265,8 +265,8 @@ xive_source_esb_read(uint64_t addr, uint32_t >>> srcno, uint64_t value) "@0x%"PRIx64 >>> xive_source_esb_write(uint64_t addr, uint32_t srcno, uint64_t >>> value) "@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64 >>> xive_router_end_notify(uint8_t end_blk, uint32_t end_idx, uint32_t >>> end_data) "END 0x%02x/0x%04x -> enqueue 0x%08x" >>> xive_router_end_escalate(uint8_t end_blk, uint32_t end_idx, uint8_t >>> esc_blk, uint32_t esc_idx, uint32_t end_data) "END 0x%02x/0x%04x -> >>> escalate END 0x%02x/0x%04x data 0x%08x" >>> -xive_tctx_tm_write(uint64_t offset, unsigned int size, uint64_t >>> value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 >>> -xive_tctx_tm_read(uint64_t offset, unsigned int size, uint64_t >>> value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 >>> +xive_tctx_tm_write(uint32_t index, uint64_t offset, unsigned int >>> size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 >>> +xive_tctx_tm_read(uint32_t index, uint64_t offset, unsigned int >>> size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 >> >> "target" is kinda confusing, what about: >> >> xive_tctx_tm_read(uint32_t cpu_index, ...) "cpu=%d @0x%"PRIx64" ... > > An interrupt 'source' is served by a 'target', a target could be a CPU, > a vCPU id, a group of vCPU, a process id. > > 'target' is part of the XIVE nomenclature, in HW specs, in drivers, FW, > Linux, KVM, and models in QEMU. It is fine. Ah OK. Then xive_tctx_tm_read(uint32_t target, ...).
On 7/5/23 13:26, Philippe Mathieu-Daudé wrote: > On 5/7/23 13:18, Cédric Le Goater wrote: >> On 7/5/23 13:12, Philippe Mathieu-Daudé wrote: >>> On 5/7/23 13:00, Frederic Barrat wrote: >>>> Add the CPU target in the trace when reading/writing the TIMA >>>> space. It was already done for other TIMA ops (notify, accept, ...), >>>> only missing for those 2. Useful for debug and even more now that we >>>> experiment with SMT. >>>> >>>> Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> >>>> --- >>>> hw/intc/trace-events | 4 ++-- >>>> hw/intc/xive.c | 4 ++-- >>>> 2 files changed, 4 insertions(+), 4 deletions(-) >>>> >>>> diff --git a/hw/intc/trace-events b/hw/intc/trace-events >>>> index 5c6094c457..36ff71f947 100644 >>>> --- a/hw/intc/trace-events >>>> +++ b/hw/intc/trace-events >>>> @@ -265,8 +265,8 @@ xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64 >>>> xive_source_esb_write(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64 >>>> xive_router_end_notify(uint8_t end_blk, uint32_t end_idx, uint32_t end_data) "END 0x%02x/0x%04x -> enqueue 0x%08x" >>>> xive_router_end_escalate(uint8_t end_blk, uint32_t end_idx, uint8_t esc_blk, uint32_t esc_idx, uint32_t end_data) "END 0x%02x/0x%04x -> escalate END 0x%02x/0x%04x data 0x%08x" >>>> -xive_tctx_tm_write(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 >>>> -xive_tctx_tm_read(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 >>>> +xive_tctx_tm_write(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 >>>> +xive_tctx_tm_read(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 >>> >>> "target" is kinda confusing, what about: >>> >>> xive_tctx_tm_read(uint32_t cpu_index, ...) "cpu=%d @0x%"PRIx64" ... >> >> An interrupt 'source' is served by a 'target', a target could be a CPU, >> a vCPU id, a group of vCPU, a process id. >> >> 'target' is part of the XIVE nomenclature, in HW specs, in drivers, FW, >> Linux, KVM, and models in QEMU. It is fine. > > Ah OK. Then xive_tctx_tm_read(uint32_t target, ...). better indeed. What would be good to know also, is which vCPU is currently dispatched on the HW thread. The info is in W2 of the ring being accessed. Thanks, C.
Queued in gitlab.com/danielhb/qemu/tree/ppc-next. Thanks, Daniel On 7/5/23 08:00, Frederic Barrat wrote: > Add the CPU target in the trace when reading/writing the TIMA > space. It was already done for other TIMA ops (notify, accept, ...), > only missing for those 2. Useful for debug and even more now that we > experiment with SMT. > > Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> > --- > hw/intc/trace-events | 4 ++-- > hw/intc/xive.c | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/hw/intc/trace-events b/hw/intc/trace-events > index 5c6094c457..36ff71f947 100644 > --- a/hw/intc/trace-events > +++ b/hw/intc/trace-events > @@ -265,8 +265,8 @@ xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64 > xive_source_esb_write(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64 > xive_router_end_notify(uint8_t end_blk, uint32_t end_idx, uint32_t end_data) "END 0x%02x/0x%04x -> enqueue 0x%08x" > xive_router_end_escalate(uint8_t end_blk, uint32_t end_idx, uint8_t esc_blk, uint32_t esc_idx, uint32_t end_data) "END 0x%02x/0x%04x -> escalate END 0x%02x/0x%04x data 0x%08x" > -xive_tctx_tm_write(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 > -xive_tctx_tm_read(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 > +xive_tctx_tm_write(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 > +xive_tctx_tm_read(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 > xive_presenter_notify(uint8_t nvt_blk, uint32_t nvt_idx, uint8_t ring) "found NVT 0x%x/0x%x ring=0x%x" > xive_end_source_read(uint8_t end_blk, uint32_t end_idx, uint64_t addr) "END 0x%x/0x%x @0x%"PRIx64 > > diff --git a/hw/intc/xive.c b/hw/intc/xive.c > index c014e961a4..56670b2cac 100644 > --- a/hw/intc/xive.c > +++ b/hw/intc/xive.c > @@ -566,7 +566,7 @@ void xive_tctx_tm_write(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset, > { > const XiveTmOp *xto; > > - trace_xive_tctx_tm_write(offset, size, value); > + trace_xive_tctx_tm_write(tctx->cs->cpu_index, offset, size, value); > > /* > * TODO: check V bit in Q[0-3]W2 > @@ -639,7 +639,7 @@ uint64_t xive_tctx_tm_read(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset, > */ > ret = xive_tm_raw_read(tctx, offset, size); > out: > - trace_xive_tctx_tm_read(offset, size, ret); > + trace_xive_tctx_tm_read(tctx->cs->cpu_index, offset, size, ret); > return ret; > } >
diff --git a/hw/intc/trace-events b/hw/intc/trace-events index 5c6094c457..36ff71f947 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -265,8 +265,8 @@ xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64 xive_source_esb_write(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64 xive_router_end_notify(uint8_t end_blk, uint32_t end_idx, uint32_t end_data) "END 0x%02x/0x%04x -> enqueue 0x%08x" xive_router_end_escalate(uint8_t end_blk, uint32_t end_idx, uint8_t esc_blk, uint32_t esc_idx, uint32_t end_data) "END 0x%02x/0x%04x -> escalate END 0x%02x/0x%04x data 0x%08x" -xive_tctx_tm_write(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 -xive_tctx_tm_read(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_write(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_read(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 xive_presenter_notify(uint8_t nvt_blk, uint32_t nvt_idx, uint8_t ring) "found NVT 0x%x/0x%x ring=0x%x" xive_end_source_read(uint8_t end_blk, uint32_t end_idx, uint64_t addr) "END 0x%x/0x%x @0x%"PRIx64 diff --git a/hw/intc/xive.c b/hw/intc/xive.c index c014e961a4..56670b2cac 100644 --- a/hw/intc/xive.c +++ b/hw/intc/xive.c @@ -566,7 +566,7 @@ void xive_tctx_tm_write(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset, { const XiveTmOp *xto; - trace_xive_tctx_tm_write(offset, size, value); + trace_xive_tctx_tm_write(tctx->cs->cpu_index, offset, size, value); /* * TODO: check V bit in Q[0-3]W2 @@ -639,7 +639,7 @@ uint64_t xive_tctx_tm_read(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset, */ ret = xive_tm_raw_read(tctx, offset, size); out: - trace_xive_tctx_tm_read(offset, size, ret); + trace_xive_tctx_tm_read(tctx->cs->cpu_index, offset, size, ret); return ret; }
Add the CPU target in the trace when reading/writing the TIMA space. It was already done for other TIMA ops (notify, accept, ...), only missing for those 2. Useful for debug and even more now that we experiment with SMT. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> --- hw/intc/trace-events | 4 ++-- hw/intc/xive.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)