| Message ID | 20230706173723.2226030-1-sumang@marvell.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [V4] octeontx2-pf: Add additional check for MCAM rules | expand |
On Thu, Jul 06, 2023 at 11:07:23PM +0530, Suman Ghosh wrote: > Due to hardware limitation, MCAM drop rule with > ether_type == 802.1Q and vlan_id == 0 is not supported. Hence rejecting > such rules. > > Fixes: dce677da57c0 ("octeontx2-pf: Add vlan-etype to ntuple filters") > Signed-off-by: Suman Ghosh <sumang@marvell.com> > --- > Changes since v3: > - moved assignment of vlan_etype before the if check And what were changes in previous versions? Also you should write the target net or net-next in the patch subject. Thanks
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c index 10e11262d48a..2d7713a1a153 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c @@ -872,6 +872,14 @@ static int otx2_prepare_flow_request(struct ethtool_rx_flow_spec *fsp, return -EINVAL; vlan_etype = be16_to_cpu(fsp->h_ext.vlan_etype); + + /* Drop rule with vlan_etype == 802.1Q + * and vlan_id == 0 is not supported + */ + if (vlan_etype == ETH_P_8021Q && !fsp->m_ext.vlan_tci && + fsp->ring_cookie == RX_CLS_FLOW_DISC) + return -EINVAL; + /* Only ETH_P_8021Q and ETH_P_802AD types supported */ if (vlan_etype != ETH_P_8021Q && vlan_etype != ETH_P_8021AD) diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c index 044cc211424e..6c0fdc2bad73 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c @@ -604,6 +604,19 @@ static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node, return -EOPNOTSUPP; } + if (!match.mask->vlan_id) { + struct flow_action_entry *act; + int i; + + flow_action_for_each(i, act, &rule->action) { + if (act->id == FLOW_ACTION_DROP) { + netdev_err(nic->netdev, "vlan tpid 0x%x with vlan_id %d is not supported for DROP rule.\n", + ntohs(match.key->vlan_tpid), match.key->vlan_id); + return -EOPNOTSUPP; + } + } + } + if (match.mask->vlan_id || match.mask->vlan_dei || match.mask->vlan_priority) {
Due to hardware limitation, MCAM drop rule with ether_type == 802.1Q and vlan_id == 0 is not supported. Hence rejecting such rules. Fixes: dce677da57c0 ("octeontx2-pf: Add vlan-etype to ntuple filters") Signed-off-by: Suman Ghosh <sumang@marvell.com> --- Changes since v3: - moved assignment of vlan_etype before the if check .../net/ethernet/marvell/octeontx2/nic/otx2_flows.c | 8 ++++++++ .../net/ethernet/marvell/octeontx2/nic/otx2_tc.c | 13 +++++++++++++ 2 files changed, 21 insertions(+)