diff mbox series

[09/10] spi: rzv2m-csi: Get rid of the x_trg{_words} tables

Message ID 20230715010407.1751715-10-fabrizio.castro.jz@renesas.com (mailing list archive)
State Superseded
Headers show
Series spi: rzv2m-csi: Code refactoring | expand

Commit Message

Fabrizio Castro July 15, 2023, 1:04 a.m. UTC 
Table x_trg can be replaced with ilog2(), and table x_trg_words
can be replaced with rounddown_pow_of_two().
Replace the tables usage with the corresponding macros.
While at it, remove a couple of unnecessary empty lines.

Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
---
 drivers/spi/spi-rzv2m-csi.c | 21 +++------------------
 1 file changed, 3 insertions(+), 18 deletions(-)

Comments

Andy Shevchenko July 15, 2023, 7:57 a.m. UTC | #1 
On Sat, Jul 15, 2023 at 4:04 AM Fabrizio Castro
<fabrizio.castro.jz@renesas.com> wrote:
>
> Table x_trg can be replaced with ilog2(), and table x_trg_words
> can be replaced with rounddown_pow_of_two().
> Replace the tables usage with the corresponding macros.
> While at it, remove a couple of unnecessary empty lines.

Suggested-by: ?
Geert Uytterhoeven July 17, 2023, 9:49 a.m. UTC | #2 
On Sat, Jul 15, 2023 at 3:04 AM Fabrizio Castro
<fabrizio.castro.jz@renesas.com> wrote:
> Table x_trg can be replaced with ilog2(), and table x_trg_words
> can be replaced with rounddown_pow_of_two().
> Replace the tables usage with the corresponding macros.
> While at it, remove a couple of unnecessary empty lines.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/spi/spi-rzv2m-csi.c b/drivers/spi/spi-rzv2m-csi.c
index 1e5ed1089f42..1874ca1c2747 100644
--- a/drivers/spi/spi-rzv2m-csi.c
+++ b/drivers/spi/spi-rzv2m-csi.c
@@ -10,6 +10,7 @@ 
 #include <linux/count_zeros.h>
 #include <linux/interrupt.h>
 #include <linux/iopoll.h>
+#include <linux/log2.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/spi/spi.h>
@@ -99,20 +100,6 @@  struct rzv2m_csi_priv {
 	u32 status;
 };
 
-static const unsigned char x_trg[] = {
-	0, 1, 1, 2, 2, 2, 2, 3,
-	3, 3, 3, 3, 3, 3, 3, 4,
-	4, 4, 4, 4, 4, 4, 4, 4,
-	4, 4, 4, 4, 4, 4, 4, 5
-};
-
-static const unsigned char x_trg_words[] = {
-	1,  2,  2,  4,  4,  4,  4,  8,
-	8,  8,  8,  8,  8,  8,  8,  16,
-	16, 16, 16, 16, 16, 16, 16, 16,
-	16, 16, 16, 16, 16, 16, 16, 32
-};
-
 static void rzv2m_csi_reg_write_bit(const struct rzv2m_csi_priv *csi,
 				    int reg_offs, int bit_mask, u32 value)
 {
@@ -216,7 +203,7 @@  static inline void rzv2m_csi_calc_current_transfer(struct rzv2m_csi_priv *csi)
 	 * less than or equal to the number of bytes we need to transfer.
 	 * This may result in multiple smaller transfers.
 	 */
-	csi->words_to_transfer = x_trg_words[to_transfer - 1];
+	csi->words_to_transfer = rounddown_pow_of_two(to_transfer);
 
 	if (csi->bytes_per_word == 2)
 		csi->bytes_to_transfer = csi->words_to_transfer << 1;
@@ -227,7 +214,7 @@  static inline void rzv2m_csi_calc_current_transfer(struct rzv2m_csi_priv *csi)
 static inline void rzv2m_csi_set_rx_fifo_trigger_level(struct rzv2m_csi_priv *csi)
 {
 	rzv2m_csi_reg_write_bit(csi, CSI_FIFOTRG, CSI_FIFOTRG_R_TRG,
-				x_trg[csi->words_to_transfer - 1]);
+				ilog2(csi->words_to_transfer));
 }
 
 static inline void rzv2m_csi_enable_rx_trigger(struct rzv2m_csi_priv *csi,
@@ -300,7 +287,6 @@  static int rzv2m_csi_wait_for_tx_empty(struct rzv2m_csi_priv *csi)
 		return 0;
 
 	ret = rzv2m_csi_wait_for_interrupt(csi, CSI_INT_TREND, CSI_CNT_TREND_E);
-
 	if (ret == -ETIMEDOUT)
 		csi->errors |= TX_TIMEOUT_ERROR;
 
@@ -316,7 +302,6 @@  static inline int rzv2m_csi_wait_for_rx_ready(struct rzv2m_csi_priv *csi)
 
 	ret = rzv2m_csi_wait_for_interrupt(csi, CSI_INT_R_TRGR,
 					   CSI_CNT_R_TRGR_E);
-
 	if (ret == -ETIMEDOUT)
 		csi->errors |= RX_TIMEOUT_ERROR;