diff mbox series

[net-next,v4,8/9] can: ems_pci: Remove unnecessary (void*) conversions

Message ID 20230717071800.144129-1-yunchuan@nfschina.com (mailing list archive)
State Awaiting Upstream
Delegated to: Netdev Maintainers
Headers show
Series None | expand

Commit Message

Wu Yunchuan July 17, 2023, 7:18 a.m. UTC 
No need cast (void*) to (struct ems_pci_card *).

Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
---
 drivers/net/can/sja1000/ems_pci.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Marc Kleine-Budde July 17, 2023, 3 p.m. UTC | #1 
On 17.07.2023 15:18:01, Wu Yunchuan wrote:
> No need cast (void*) to (struct ems_pci_card *).
> 
> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
> Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>

Applied to linux-can-next/testing.

Thanks,
Marc
diff mbox series

Patch

diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c
index c56e27223e5f..ac86640998a8 100644
--- a/drivers/net/can/sja1000/ems_pci.c
+++ b/drivers/net/can/sja1000/ems_pci.c
@@ -148,7 +148,7 @@  static void ems_pci_v1_write_reg(const struct sja1000_priv *priv,
 
 static void ems_pci_v1_post_irq(const struct sja1000_priv *priv)
 {
-	struct ems_pci_card *card = (struct ems_pci_card *)priv->priv;
+	struct ems_pci_card *card = priv->priv;
 
 	/* reset int flag of pita */
 	writel(PITA2_ICR_INT0_EN | PITA2_ICR_INT0,
@@ -168,7 +168,7 @@  static void ems_pci_v2_write_reg(const struct sja1000_priv *priv,
 
 static void ems_pci_v2_post_irq(const struct sja1000_priv *priv)
 {
-	struct ems_pci_card *card = (struct ems_pci_card *)priv->priv;
+	struct ems_pci_card *card = priv->priv;
 
 	writel(PLX_ICSR_ENA_CLR, card->conf_addr + PLX_ICSR);
 }
@@ -186,7 +186,7 @@  static void ems_pci_v3_write_reg(const struct sja1000_priv *priv,
 
 static void ems_pci_v3_post_irq(const struct sja1000_priv *priv)
 {
-	struct ems_pci_card *card = (struct ems_pci_card *)priv->priv;
+	struct ems_pci_card *card = priv->priv;
 
 	writel(ASIX_LINTSR_INT0AC, card->conf_addr + ASIX_LINTSR);
 }