mbox series

[v5,0/4] Allow disabling all native fbdev drivers and only keeping DRM emulation

Message ID 20230714171642.91185-1-javierm@redhat.com (mailing list archive)
Headers show
Series Allow disabling all native fbdev drivers and only keeping DRM emulation | expand

Message

Javier Martinez Canillas July 14, 2023, 5:16 p.m. UTC
This patch series splits the fbdev core support in two different Kconfig
symbols: FB and FB_CORE. The motivation for this is to allow CONFIG_FB to
be disabled, while still having the the core fbdev support needed for the
CONFIG_DRM_FBDEV_EMULATION to be enabled. The motivation is automatically
disabling all fbdev drivers instead of having to be disabled individually.

The reason for doing this is that now with simpledrm, there's no need for
the legacy fbdev (e.g: efifb or vesafb) drivers anymore and many distros
now disable them. But it would simplify the config a lot fo have a single
Kconfig symbol to disable all fbdev drivers.

I've built tested with possible combinations of CONFIG_FB, CONFIG_FB_CORE,
CONFIG_DRM_FBDEV_EMULATION and CONFIG_FB_DEVICE symbols set to 'y' or 'n'.

Patch #1 moves the auxdisplay drivers to "Graphics support" Kconfig menu,
patch #2 moves the core fbdev Kconfig symbols to a separate Kconfig file,
patch #3 does the FB symbol split and introduces the FB_CORE symbol and
finally patch #4 makes the DRM symbol to select FB_CORE if the DRM fbdev
emualtion support was enabled.

Since this series touches three subsystems (auxdisplay, fbdev and DRM),
I would like to merge it through DRM with the acks of these maintainers.

This is a v5 of the patch-set that addresses issues pointed out by Arnd
Bergmann, Thomas Zimmermann and Geert Uytterhoeven in the previous v4:

https://lists.freedesktop.org/archives/dri-devel/2023-July/411842.html

Changes in v5:
- Take the auxdisplay/Kconfig source out of "if HAS_IOMEM" (Geert Uytterhoeven).
- Fix ifdef guard check in drivers/video/backlight/backlight.c (Arnd Bergmann).

Changes in v4:
- Fix menuconfig hierarchy that was broken in v3 (Arnd Bergmann).

Changes in v3:
- Really make a hidden symbol by removing the prompt (Arnd Bergmann).
- Change FB_CORE to config instead of menuconfig (Arnd Bergmann).
- Keep "depends on FB" for FIRMWARE_EDID (Arnd Bergmann).
- Compile out fb_backlight.o and fbmon.o that are only needed for FB
  (Arnd Bergmann).
- Make FB_DEVICE to depend on FB_CORE instead of selecting it.
- Make the DRM symbol to select FB_CORE if DRM_FBDEV_EMULATION is
  enabled (Arnd Bergmann).
- Also make DRM select FB_SYS_HELPERS_DEFERRED if DRM_FBDEV_EMULATION
- Make DRM_FBDEV_EMULATION to depend on DRM instead of DRM_KMS_HELPER.

Changes in v2:
- Keep "depends on FB" for FB_DDC, FB_HECUBA, FB_SVGALIB, FB_MACMODES,
  FB_BACKLIGHT, FB_MODE_HELPERS and FB_TILEBLITTING (Arnd Bergmann).
- Don't change the fb.o object name (Arnd Bergmann).
- Make FB_CORE a non-visible Kconfig symbol instead (Thomas Zimmermann).
- Make CONFIG_DRM_FBDEV_EMULATION to select FB_CORE (Thomas Zimmermann).

Javier Martinez Canillas (4):
  video: Add auxiliary display drivers to Graphics support menu
  fbdev: Move core fbdev symbols to a separate Kconfig file
  fbdev: Split frame buffer support in FB and FB_CORE symbols
  drm: Make FB_CORE to be selected if DRM fbdev emulation is enabled

 arch/x86/Makefile                   |   2 +-
 arch/x86/video/Makefile             |   2 +-
 drivers/Kconfig                     |   2 -
 drivers/gpu/drm/Kconfig             |   7 +-
 drivers/video/Kconfig               |   2 +
 drivers/video/backlight/backlight.c |   6 +-
 drivers/video/console/Kconfig       |   2 +-
 drivers/video/fbdev/Kconfig         | 213 ++--------------------------
 drivers/video/fbdev/core/Kconfig    | 206 +++++++++++++++++++++++++++
 drivers/video/fbdev/core/Makefile   |   8 +-
 10 files changed, 232 insertions(+), 218 deletions(-)
 create mode 100644 drivers/video/fbdev/core/Kconfig

Comments

Arnd Bergmann July 18, 2023, 7:37 p.m. UTC | #1
On Fri, Jul 14, 2023, at 19:16, Javier Martinez Canillas wrote:
> This patch series splits the fbdev core support in two different Kconfig
> symbols: FB and FB_CORE. The motivation for this is to allow CONFIG_FB to
> be disabled, while still having the the core fbdev support needed for the
> CONFIG_DRM_FBDEV_EMULATION to be enabled. The motivation is automatically
> disabling all fbdev drivers instead of having to be disabled individually.
>
> The reason for doing this is that now with simpledrm, there's no need for
> the legacy fbdev (e.g: efifb or vesafb) drivers anymore and many distros
> now disable them. But it would simplify the config a lot fo have a single
> Kconfig symbol to disable all fbdev drivers.
>
> I've built tested with possible combinations of CONFIG_FB, CONFIG_FB_CORE,
> CONFIG_DRM_FBDEV_EMULATION and CONFIG_FB_DEVICE symbols set to 'y' or 'n'.
>
> Patch #1 moves the auxdisplay drivers to "Graphics support" Kconfig menu,
> patch #2 moves the core fbdev Kconfig symbols to a separate Kconfig file,
> patch #3 does the FB symbol split and introduces the FB_CORE symbol and
> finally patch #4 makes the DRM symbol to select FB_CORE if the DRM fbdev
> emualtion support was enabled.
>
> Since this series touches three subsystems (auxdisplay, fbdev and DRM),
> I would like to merge it through DRM with the acks of these maintainers.
>
> This is a v5 of the patch-set that addresses issues pointed out by Arnd
> Bergmann, Thomas Zimmermann and Geert Uytterhoeven in the previous v4:
>
> https://lists.freedesktop.org/archives/dri-devel/2023-July/411842.html

Looks all good to me, except for two minor things I found in build testing
and replied to separately. With those fixed:

Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Javier Martinez Canillas July 19, 2023, 8 a.m. UTC | #2
"Arnd Bergmann" <arnd@arndb.de> writes:

> On Fri, Jul 14, 2023, at 19:16, Javier Martinez Canillas wrote:
>> This patch series splits the fbdev core support in two different Kconfig
>> symbols: FB and FB_CORE. The motivation for this is to allow CONFIG_FB to
>> be disabled, while still having the the core fbdev support needed for the
>> CONFIG_DRM_FBDEV_EMULATION to be enabled. The motivation is automatically
>> disabling all fbdev drivers instead of having to be disabled individually.
>>
>> The reason for doing this is that now with simpledrm, there's no need for
>> the legacy fbdev (e.g: efifb or vesafb) drivers anymore and many distros
>> now disable them. But it would simplify the config a lot fo have a single
>> Kconfig symbol to disable all fbdev drivers.
>>
>> I've built tested with possible combinations of CONFIG_FB, CONFIG_FB_CORE,
>> CONFIG_DRM_FBDEV_EMULATION and CONFIG_FB_DEVICE symbols set to 'y' or 'n'.
>>
>> Patch #1 moves the auxdisplay drivers to "Graphics support" Kconfig menu,
>> patch #2 moves the core fbdev Kconfig symbols to a separate Kconfig file,
>> patch #3 does the FB symbol split and introduces the FB_CORE symbol and
>> finally patch #4 makes the DRM symbol to select FB_CORE if the DRM fbdev
>> emualtion support was enabled.
>>
>> Since this series touches three subsystems (auxdisplay, fbdev and DRM),
>> I would like to merge it through DRM with the acks of these maintainers.
>>
>> This is a v5 of the patch-set that addresses issues pointed out by Arnd
>> Bergmann, Thomas Zimmermann and Geert Uytterhoeven in the previous v4:
>>
>> https://lists.freedesktop.org/archives/dri-devel/2023-July/411842.html
>
> Looks all good to me, except for two minor things I found in build testing
> and replied to separately. With those fixed:
>
> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
> Tested-by: Arnd Bergmann <arnd@arndb.de>
>

Awesome, thanks a lot for your help!