| Message ID | 20230719060954.14864-4-zelong.dong@amlogic.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | reset: amlogic-c3: add reset driver | expand |
On Wed, Jul 19, 2023 at 02:09:54PM +0800, zelong dong wrote: > From: Zelong Dong <zelong.dong@amlogic.com> > > Add the reset controller device of Amlogic C3 SoC family > > Signed-off-by: Zelong Dong <zelong.dong@amlogic.com> Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> > --- > arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi > index 60ad4f3eef9d..28698c42e11e 100644 > --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi > +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi > @@ -6,6 +6,7 @@ > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/reset/amlogic,c3-reset.h> > > / { > cpus { > @@ -72,6 +73,12 @@ apb4: bus@fe000000 { > #size-cells = <2>; > ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; > > + reset: reset-controller@2000 { > + compatible = "amlogic,c3-reset"; > + reg = <0x0 0x2000 0x0 0x98>; > + #reset-cells = <1>; > + }; > + > uart_b: serial@7a000 { > compatible = "amlogic,meson-s4-uart", > "amlogic,meson-ao-uart"; > -- > 2.35.1 > > > _______________________________________________ > linux-amlogic mailing list > linux-amlogic@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-amlogic
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index 60ad4f3eef9d..28698c42e11e 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/reset/amlogic,c3-reset.h> / { cpus { @@ -72,6 +73,12 @@ apb4: bus@fe000000 { #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + reset: reset-controller@2000 { + compatible = "amlogic,c3-reset"; + reg = <0x0 0x2000 0x0 0x98>; + #reset-cells = <1>; + }; + uart_b: serial@7a000 { compatible = "amlogic,meson-s4-uart", "amlogic,meson-ao-uart";