diff mbox series

[v5,4/6] arm64: dts: qcom: ipq5332: Add USB related nodes

Message ID b9d94f32ae01298c3009286670bba47d74ae28d9.1689913334.git.quic_varada@quicinc.com (mailing list archive)
State New, archived
Headers show
Series Enable IPQ5332 USB2 | expand

Commit Message

Varadarajan Narayanan July 21, 2023, 4:35 a.m. UTC 
Add USB phy and controller nodes.

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v5:
	Use generic phy instead of usb-phy
	'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom dtbs_check' passed
	'DT_CHECKER_FLAGS='-v -m' DT_SCHEMA_FILES=qcom dt_binding_check' passed
v4:
	Change node name
	Remove blank line
	'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom qcom/ipq5332-rdp441.dtb' passed
v1:
	Rename phy node
	Change compatible from m31,ipq5332-usb-hsphy -> qcom,ipq5332-usb-hsphy
	Remove 'qscratch' from phy node
	Fix alignment and upper-case hex no.s
	Add clock definition for the phy
	Remove snps,ref-clock-period-ns as it is not used. dwc3_ref_clk_period()
	in dwc3/core.c takes the frequency from ref clock and calculates fladj
	as appropriate.
---
 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 56 +++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

Comments

Bjorn Andersson July 22, 2023, 5:05 a.m. UTC | #1 
On Fri, Jul 21, 2023 at 10:05:29AM +0530, Varadarajan Narayanan wrote:
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> index 8bfc2db..a22f340 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -405,6 +405,62 @@
>  				status = "disabled";
>  			};
>  		};
> +
> +		usbphy0: usb-phy@7b000 {

s/usb-phy/phy/

> +			compatible = "qcom,ipq5332-usb-hsphy";
> +			reg = <0x0007b000 0x12c>;

Sort your nodes under /soc by their address.

> +
> +			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
> +			clock-names = "cfg_ahb";
> +
> +			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> +
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		usb2: usb2@8a00000 {

usb@... drop the '2' in the node name (not in the label). Although, why
does usb2 use the phy labeled usb0?

Regards,
Bjorn
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 8bfc2db..a22f340 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -405,6 +405,62 @@ 
 				status = "disabled";
 			};
 		};
+
+		usbphy0: usb-phy@7b000 {
+			compatible = "qcom,ipq5332-usb-hsphy";
+			reg = <0x0007b000 0x12c>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+			clock-names = "cfg_ahb";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb2: usb2@8a00000 {
+			compatible = "qcom,ipq5332-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
+			clocks = <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_SNOC_USB_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			resets = <&gcc GCC_USB_BCR>;
+
+			qcom,select-utmi-as-pipe-clk;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			usb2_0_dwc: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x08a00000 0xe000>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				phy-names = "usb2-phy";
+				phys = <&usbphy0>;
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
 	};
 
 	timer {