| Message ID | f02203d5565bbe78c2406ca45a5a72336a1315ea.1690399379.git.pav@iki.fi (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 2dfe76d58d3ac6d7e89195826787acafe2870518 |
| Headers | show |
| Series | Locking in hci_sync | expand |
| Context | Check | Description |
|---|---|---|
| tedd_an/pre-ci_am | success | Success |
| tedd_an/CheckPatch | success | CheckPatch PASS |
| tedd_an/GitLint | success | Gitlint PASS |
| tedd_an/SubjectPrefix | success | Gitlint PASS |
| tedd_an/IncrementalBuild | success | Incremental Build PASS |
Hi Pauli, On Wed, Jul 26, 2023 at 2:37 PM Pauli Virtanen <pav@iki.fi> wrote: > > Calling hci_conn_del in __iso_sock_close is invalid. It needs > hdev->lock, but it cannot be acquired there due to lock ordering. > > Fix this by doing cleanup via hci_conn_drop. > > Return hci_conn with refcount 1 from hci_bind_cis and hci_connect_cis, > so that the iso_conn always holds one reference. This also fixes > refcounting when error handling. > > Since hci_conn_abort shall handle termination of connections in any > state properly, we can handle BT_CONNECT socket state in the same way as > BT_CONNECTED. > > Signed-off-by: Pauli Virtanen <pav@iki.fi> > --- > net/bluetooth/hci_conn.c | 5 +++++ > net/bluetooth/iso.c | 14 +------------- > 2 files changed, 6 insertions(+), 13 deletions(-) > > diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c > index ba339a0eb851..33fbdc8e0748 100644 > --- a/net/bluetooth/hci_conn.c > +++ b/net/bluetooth/hci_conn.c > @@ -1901,6 +1901,8 @@ struct hci_conn *hci_bind_cis(struct hci_dev *hdev, bdaddr_t *dst, > return ERR_PTR(-EINVAL); > } > > + hci_conn_hold(cis); > + > cis->iso_qos = *qos; > cis->state = BT_BOUND; > > @@ -2254,6 +2256,9 @@ struct hci_conn *hci_connect_cis(struct hci_dev *hdev, bdaddr_t *dst, > return ERR_PTR(-ENOLINK); > } > > + /* Link takes the refcount */ > + hci_conn_drop(cis); > + > cis->state = BT_CONNECT; > > hci_le_create_cis_pending(hdev); > diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c > index cbe3299b4a41..358954bfbb32 100644 > --- a/net/bluetooth/iso.c > +++ b/net/bluetooth/iso.c > @@ -628,6 +628,7 @@ static void __iso_sock_close(struct sock *sk) > iso_sock_cleanup_listen(sk); > break; > > + case BT_CONNECT: > case BT_CONNECTED: > case BT_CONFIG: > if (iso_pi(sk)->conn->hcon) { > @@ -643,19 +644,6 @@ static void __iso_sock_close(struct sock *sk) > break; > > case BT_CONNECT2: > - iso_chan_del(sk, ECONNRESET); > - break; > - case BT_CONNECT: > - /* In case of DEFER_SETUP the hcon would be bound to CIG which > - * needs to be removed so just call hci_conn_del so the cleanup > - * callback do what is needed. > - */ > - if (test_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags) && > - iso_pi(sk)->conn->hcon) { > - hci_conn_del(iso_pi(sk)->conn->hcon); > - iso_pi(sk)->conn->hcon = NULL; > - } > - > iso_chan_del(sk, ECONNRESET); > break; > case BT_DISCONN: > -- > 2.41.0 I guess this sort of fix can be sent separately which I guess helps here since we can prioritize the ones that don't have side effects.
Hi Luiz, to, 2023-07-27 kello 14:14 -0700, Luiz Augusto von Dentz kirjoitti: > On Wed, Jul 26, 2023 at 2:37 PM Pauli Virtanen <pav@iki.fi> wrote: > > > > Calling hci_conn_del in __iso_sock_close is invalid. It needs > > hdev->lock, but it cannot be acquired there due to lock ordering. > > > > Fix this by doing cleanup via hci_conn_drop. > > > > Return hci_conn with refcount 1 from hci_bind_cis and hci_connect_cis, > > so that the iso_conn always holds one reference. This also fixes > > refcounting when error handling. > > > > Since hci_conn_abort shall handle termination of connections in any > > state properly, we can handle BT_CONNECT socket state in the same way as > > BT_CONNECTED. > > > > Signed-off-by: Pauli Virtanen <pav@iki.fi> > > --- > > net/bluetooth/hci_conn.c | 5 +++++ > > net/bluetooth/iso.c | 14 +------------- > > 2 files changed, 6 insertions(+), 13 deletions(-) > > > > diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c > > index ba339a0eb851..33fbdc8e0748 100644 > > --- a/net/bluetooth/hci_conn.c > > +++ b/net/bluetooth/hci_conn.c > > @@ -1901,6 +1901,8 @@ struct hci_conn *hci_bind_cis(struct hci_dev *hdev, bdaddr_t *dst, > > return ERR_PTR(-EINVAL); > > } > > > > + hci_conn_hold(cis); > > + > > cis->iso_qos = *qos; > > cis->state = BT_BOUND; > > > > @@ -2254,6 +2256,9 @@ struct hci_conn *hci_connect_cis(struct hci_dev *hdev, bdaddr_t *dst, > > return ERR_PTR(-ENOLINK); > > } > > > > + /* Link takes the refcount */ > > + hci_conn_drop(cis); > > + > > cis->state = BT_CONNECT; > > > > hci_le_create_cis_pending(hdev); > > diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c > > index cbe3299b4a41..358954bfbb32 100644 > > --- a/net/bluetooth/iso.c > > +++ b/net/bluetooth/iso.c > > @@ -628,6 +628,7 @@ static void __iso_sock_close(struct sock *sk) > > iso_sock_cleanup_listen(sk); > > break; > > > > + case BT_CONNECT: > > case BT_CONNECTED: > > case BT_CONFIG: > > if (iso_pi(sk)->conn->hcon) { > > @@ -643,19 +644,6 @@ static void __iso_sock_close(struct sock *sk) > > break; > > > > case BT_CONNECT2: > > - iso_chan_del(sk, ECONNRESET); > > - break; > > - case BT_CONNECT: > > - /* In case of DEFER_SETUP the hcon would be bound to CIG which > > - * needs to be removed so just call hci_conn_del so the cleanup > > - * callback do what is needed. > > - */ > > - if (test_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags) && > > - iso_pi(sk)->conn->hcon) { > > - hci_conn_del(iso_pi(sk)->conn->hcon); > > - iso_pi(sk)->conn->hcon = NULL; > > - } > > - > > iso_chan_del(sk, ECONNRESET); > > break; > > case BT_DISCONN: > > -- > > 2.41.0 > > I guess this sort of fix can be sent separately which I guess helps > here since we can prioritize the ones that don't have side effects. Right, I can send these separately in the actual patch series. This one requires hci_conn_abort deletes conns with no handle yet though, otherwise it introduces failure to cleanup in a race condition.
Hi Pauli, On Thu, Jul 27, 2023 at 2:35 PM Pauli Virtanen <pav@iki.fi> wrote: > > Hi Luiz, > > to, 2023-07-27 kello 14:14 -0700, Luiz Augusto von Dentz kirjoitti: > > On Wed, Jul 26, 2023 at 2:37 PM Pauli Virtanen <pav@iki.fi> wrote: > > > > > > Calling hci_conn_del in __iso_sock_close is invalid. It needs > > > hdev->lock, but it cannot be acquired there due to lock ordering. > > > > > > Fix this by doing cleanup via hci_conn_drop. > > > > > > Return hci_conn with refcount 1 from hci_bind_cis and hci_connect_cis, > > > so that the iso_conn always holds one reference. This also fixes > > > refcounting when error handling. > > > > > > Since hci_conn_abort shall handle termination of connections in any > > > state properly, we can handle BT_CONNECT socket state in the same way as > > > BT_CONNECTED. > > > > > > Signed-off-by: Pauli Virtanen <pav@iki.fi> > > > --- > > > net/bluetooth/hci_conn.c | 5 +++++ > > > net/bluetooth/iso.c | 14 +------------- > > > 2 files changed, 6 insertions(+), 13 deletions(-) > > > > > > diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c > > > index ba339a0eb851..33fbdc8e0748 100644 > > > --- a/net/bluetooth/hci_conn.c > > > +++ b/net/bluetooth/hci_conn.c > > > @@ -1901,6 +1901,8 @@ struct hci_conn *hci_bind_cis(struct hci_dev *hdev, bdaddr_t *dst, > > > return ERR_PTR(-EINVAL); > > > } > > > > > > + hci_conn_hold(cis); > > > + > > > cis->iso_qos = *qos; > > > cis->state = BT_BOUND; > > > > > > @@ -2254,6 +2256,9 @@ struct hci_conn *hci_connect_cis(struct hci_dev *hdev, bdaddr_t *dst, > > > return ERR_PTR(-ENOLINK); > > > } > > > > > > + /* Link takes the refcount */ > > > + hci_conn_drop(cis); > > > + > > > cis->state = BT_CONNECT; > > > > > > hci_le_create_cis_pending(hdev); > > > diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c > > > index cbe3299b4a41..358954bfbb32 100644 > > > --- a/net/bluetooth/iso.c > > > +++ b/net/bluetooth/iso.c > > > @@ -628,6 +628,7 @@ static void __iso_sock_close(struct sock *sk) > > > iso_sock_cleanup_listen(sk); > > > break; > > > > > > + case BT_CONNECT: > > > case BT_CONNECTED: > > > case BT_CONFIG: > > > if (iso_pi(sk)->conn->hcon) { > > > @@ -643,19 +644,6 @@ static void __iso_sock_close(struct sock *sk) > > > break; > > > > > > case BT_CONNECT2: > > > - iso_chan_del(sk, ECONNRESET); > > > - break; > > > - case BT_CONNECT: > > > - /* In case of DEFER_SETUP the hcon would be bound to CIG which > > > - * needs to be removed so just call hci_conn_del so the cleanup > > > - * callback do what is needed. > > > - */ > > > - if (test_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags) && > > > - iso_pi(sk)->conn->hcon) { > > > - hci_conn_del(iso_pi(sk)->conn->hcon); > > > - iso_pi(sk)->conn->hcon = NULL; > > > - } > > > - > > > iso_chan_del(sk, ECONNRESET); > > > break; > > > case BT_DISCONN: > > > -- > > > 2.41.0 > > > > I guess this sort of fix can be sent separately which I guess helps > > here since we can prioritize the ones that don't have side effects. > > Right, I can send these separately in the actual patch series. > > This one requires hci_conn_abort deletes conns with no handle yet > though, otherwise it introduces failure to cleanup in a race condition. I thought we need to lookup by handle to avoid races as well, or are you doing that because the handle could be updated in the meantime? Perhaps we could store the temporary handles in case the connection handles get updated then it can still be looked up by its temporary handle, either that or we disregard updates to handle when they're in the process of being aborted.
Hi Luiz, to, 2023-07-27 kello 17:27 -0700, Luiz Augusto von Dentz kirjoitti: > Hi Pauli, > > On Thu, Jul 27, 2023 at 2:35 PM Pauli Virtanen <pav@iki.fi> wrote: > > > > Hi Luiz, > > > > to, 2023-07-27 kello 14:14 -0700, Luiz Augusto von Dentz kirjoitti: > > > On Wed, Jul 26, 2023 at 2:37 PM Pauli Virtanen <pav@iki.fi> wrote: > > > > > > > > Calling hci_conn_del in __iso_sock_close is invalid. It needs > > > > hdev->lock, but it cannot be acquired there due to lock ordering. > > > > > > > > Fix this by doing cleanup via hci_conn_drop. > > > > > > > > Return hci_conn with refcount 1 from hci_bind_cis and hci_connect_cis, > > > > so that the iso_conn always holds one reference. This also fixes > > > > refcounting when error handling. > > > > > > > > Since hci_conn_abort shall handle termination of connections in any > > > > state properly, we can handle BT_CONNECT socket state in the same way as > > > > BT_CONNECTED. > > > > > > > > Signed-off-by: Pauli Virtanen <pav@iki.fi> > > > > --- > > > > net/bluetooth/hci_conn.c | 5 +++++ > > > > net/bluetooth/iso.c | 14 +------------- > > > > 2 files changed, 6 insertions(+), 13 deletions(-) > > > > > > > > diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c > > > > index ba339a0eb851..33fbdc8e0748 100644 > > > > --- a/net/bluetooth/hci_conn.c > > > > +++ b/net/bluetooth/hci_conn.c > > > > @@ -1901,6 +1901,8 @@ struct hci_conn *hci_bind_cis(struct hci_dev *hdev, bdaddr_t *dst, > > > > return ERR_PTR(-EINVAL); > > > > } > > > > > > > > + hci_conn_hold(cis); > > > > + > > > > cis->iso_qos = *qos; > > > > cis->state = BT_BOUND; > > > > > > > > @@ -2254,6 +2256,9 @@ struct hci_conn *hci_connect_cis(struct hci_dev *hdev, bdaddr_t *dst, > > > > return ERR_PTR(-ENOLINK); > > > > } > > > > > > > > + /* Link takes the refcount */ > > > > + hci_conn_drop(cis); > > > > + > > > > cis->state = BT_CONNECT; > > > > > > > > hci_le_create_cis_pending(hdev); > > > > diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c > > > > index cbe3299b4a41..358954bfbb32 100644 > > > > --- a/net/bluetooth/iso.c > > > > +++ b/net/bluetooth/iso.c > > > > @@ -628,6 +628,7 @@ static void __iso_sock_close(struct sock *sk) > > > > iso_sock_cleanup_listen(sk); > > > > break; > > > > > > > > + case BT_CONNECT: > > > > case BT_CONNECTED: > > > > case BT_CONFIG: > > > > if (iso_pi(sk)->conn->hcon) { > > > > @@ -643,19 +644,6 @@ static void __iso_sock_close(struct sock *sk) > > > > break; > > > > > > > > case BT_CONNECT2: > > > > - iso_chan_del(sk, ECONNRESET); > > > > - break; > > > > - case BT_CONNECT: > > > > - /* In case of DEFER_SETUP the hcon would be bound to CIG which > > > > - * needs to be removed so just call hci_conn_del so the cleanup > > > > - * callback do what is needed. > > > > - */ > > > > - if (test_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags) && > > > > - iso_pi(sk)->conn->hcon) { > > > > - hci_conn_del(iso_pi(sk)->conn->hcon); > > > > - iso_pi(sk)->conn->hcon = NULL; > > > > - } > > > > - > > > > iso_chan_del(sk, ECONNRESET); > > > > break; > > > > case BT_DISCONN: > > > > -- > > > > 2.41.0 > > > > > > I guess this sort of fix can be sent separately which I guess helps > > > here since we can prioritize the ones that don't have side effects. > > > > Right, I can send these separately in the actual patch series. > > > > This one requires hci_conn_abort deletes conns with no handle yet > > though, otherwise it introduces failure to cleanup in a race condition. > > I thought we need to lookup by handle to avoid races as well, or are > you doing that because the handle could be updated in the meantime? > Perhaps we could store the temporary handles in case the connection > handles get updated then it can still be looked up by its temporary > handle, either that or we disregard updates to handle when they're in > the process of being aborted. Would it be simpler to hold hci_conn_get, and then in the hci_sync callback check if the conn is still in conn_hash? The purpose of the HCI_CONN_DELETED flag in the series is to make this check easy. Also, I don't think just the handle thing protects you from races, as noted in the cover letter. AFAIK, hci_sync.c callbacks and hci_event.c processing can run at the same time on different CPU (since they run from different workqueues), so you have to lock. Moreover, handle lookup might pick up different connection than intended if a handle was reused. hci_abort_conn_sync might run quite a bit after hci_abort_conn queues it and there might be stuff like another abort and Set CIG Parametrers in the queue...
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index ba339a0eb851..33fbdc8e0748 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -1901,6 +1901,8 @@ struct hci_conn *hci_bind_cis(struct hci_dev *hdev, bdaddr_t *dst, return ERR_PTR(-EINVAL); } + hci_conn_hold(cis); + cis->iso_qos = *qos; cis->state = BT_BOUND; @@ -2254,6 +2256,9 @@ struct hci_conn *hci_connect_cis(struct hci_dev *hdev, bdaddr_t *dst, return ERR_PTR(-ENOLINK); } + /* Link takes the refcount */ + hci_conn_drop(cis); + cis->state = BT_CONNECT; hci_le_create_cis_pending(hdev); diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index cbe3299b4a41..358954bfbb32 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -628,6 +628,7 @@ static void __iso_sock_close(struct sock *sk) iso_sock_cleanup_listen(sk); break; + case BT_CONNECT: case BT_CONNECTED: case BT_CONFIG: if (iso_pi(sk)->conn->hcon) { @@ -643,19 +644,6 @@ static void __iso_sock_close(struct sock *sk) break; case BT_CONNECT2: - iso_chan_del(sk, ECONNRESET); - break; - case BT_CONNECT: - /* In case of DEFER_SETUP the hcon would be bound to CIG which - * needs to be removed so just call hci_conn_del so the cleanup - * callback do what is needed. - */ - if (test_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags) && - iso_pi(sk)->conn->hcon) { - hci_conn_del(iso_pi(sk)->conn->hcon); - iso_pi(sk)->conn->hcon = NULL; - } - iso_chan_del(sk, ECONNRESET); break; case BT_DISCONN:
Calling hci_conn_del in __iso_sock_close is invalid. It needs hdev->lock, but it cannot be acquired there due to lock ordering. Fix this by doing cleanup via hci_conn_drop. Return hci_conn with refcount 1 from hci_bind_cis and hci_connect_cis, so that the iso_conn always holds one reference. This also fixes refcounting when error handling. Since hci_conn_abort shall handle termination of connections in any state properly, we can handle BT_CONNECT socket state in the same way as BT_CONNECTED. Signed-off-by: Pauli Virtanen <pav@iki.fi> --- net/bluetooth/hci_conn.c | 5 +++++ net/bluetooth/iso.c | 14 +------------- 2 files changed, 6 insertions(+), 13 deletions(-)