diff mbox series

[v2,4/9] dt-bindings: clock: Add Marvell PXA1908 clock bindings

Message ID 20230727162909.6031-5-duje.mihanovic@skole.hr (mailing list archive)
State Changes Requested, archived
Headers show
Series None | expand

Commit Message

Duje Mihanović July 27, 2023, 4:29 p.m. UTC 
Add dt bindings and documentation for the Marvell PXA1908 clock
controller.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 .../bindings/clock/marvell,pxa1908.yaml       | 47 ++++++++++
 include/dt-bindings/clock/marvell,pxa1908.h   | 93 +++++++++++++++++++
 2 files changed, 140 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
 create mode 100644 include/dt-bindings/clock/marvell,pxa1908.h

Comments

Krzysztof Kozlowski July 28, 2023, 7:18 a.m. UTC | #1 
On 27/07/2023 18:29, Duje Mihanović wrote:
> Add dt bindings and documentation for the Marvell PXA1908 clock
> controller.
> 
> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
> ---

...

> +/* apb (apbc) peripherals */
> +#define PXA1908_CLK_UART0		1
> +#define PXA1908_CLK_UART1		2
> +#define PXA1908_CLK_GPIO		3
> +#define PXA1908_CLK_PWM0		4
> +#define PXA1908_CLK_PWM1		5
> +#define PXA1908_CLK_PWM2		6
> +#define PXA1908_CLK_PWM3		7
> +#define PXA1908_CLK_SSP0		8
> +#define PXA1908_CLK_SSP1		9
> +#define PXA1908_CLK_IPC_RST		10
> +#define PXA1908_CLK_RTC			11
> +#define PXA1908_CLK_TWSI0		12
> +#define PXA1908_CLK_KPC			13
> +#define PXA1908_CLK_SWJTAG		17
> +#define PXA1908_CLK_SSP2		20
> +#define PXA1908_CLK_TWSI1		25
> +#define PXA1908_CLK_THERMAL		28
> +#define PXA1908_CLK_TWSI3		29
> +#define PXA1908_APBC_NR_CLKS		48
> +
> +/* apb (apbcp) peripherals */
> +#define PXA1908_CLK_UART2		7
> +#define PXA1908_CLK_TWSI2		10
> +#define PXA1908_CLK_AICER		14
> +#define PXA1908_APBCP_NR_CLKS		14
> +
> +/* axi (apmu) peripherals */
> +#define PXA1908_CLK_CCIC1		9
> +#define PXA1908_CLK_ISP			14

Why do you have gaps between IDs? The clock IDs are supposed to be
continuous, otherwise it is not an ID.

> +#define PXA1908_CLK_GATE_CTRL		16

Best regards,
Krzysztof
Duje Mihanović July 30, 2023, 9:18 p.m. UTC | #2 
On Friday, July 28, 2023 9:18:44 AM CEST Krzysztof Kozlowski wrote:
> > +/* axi (apmu) peripherals */
> > +#define PXA1908_CLK_CCIC1		9
> > +#define PXA1908_CLK_ISP			14
> 
> Why do you have gaps between IDs? The clock IDs are supposed to be
> continuous, otherwise it is not an ID.

Similarly to the PXA1928 clock driver, each clock's ID is its register offset 
divided by 4. Should I use continuous IDs and put the register offsets in the 
clock driver instead?

Regards,
Duje
Krzysztof Kozlowski July 31, 2023, 7:08 a.m. UTC | #3 
On 30/07/2023 23:18, Duje Mihanović wrote:
> On Friday, July 28, 2023 9:18:44 AM CEST Krzysztof Kozlowski wrote:
>>> +/* axi (apmu) peripherals */
>>> +#define PXA1908_CLK_CCIC1		9
>>> +#define PXA1908_CLK_ISP			14
>>
>> Why do you have gaps between IDs? The clock IDs are supposed to be
>> continuous, otherwise it is not an ID.
> 
> Similarly to the PXA1928 clock driver, each clock's ID is its register offset 
> divided by 4. Should I use continuous IDs and put the register offsets in the 
> clock driver instead?

Either that or drop the bindings file, because otherwise what is the
point of having it in the bindings?

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
new file mode 100644
index 000000000000..a5af7992b1b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
@@ -0,0 +1,47 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,pxa1908.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA1908 Clock Controllers
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description: |
+  The PXA1908 clock subsystem generates and supplies clock to various
+  controllers within the PXA1908 SoC. The PXA1908 contains numerous clock
+  controller blocks, with the ones currently supported being APBC, APBCP, MPMU
+  and APMU roughly corresponding to internal buses.
+
+  All these clock identifiers could be found in <include/dt-bindings/marvell,pxa1908.h>.
+
+properties:
+  compatible:
+    enum:
+      - marvell,pxa1908-apbc
+      - marvell,pxa1908-apbcp
+      - marvell,pxa1908-mpmu
+      - marvell,pxa1908-apmu
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # APMU block:
+  - |
+    clock-controller@d4282800 {
+      compatible = "marvell,pxa1908-apmu";
+      reg = <0xd4282800 0x400>;
+      #clock-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/marvell,pxa1908.h b/include/dt-bindings/clock/marvell,pxa1908.h
new file mode 100644
index 000000000000..dbb487baf65f
--- /dev/null
+++ b/include/dt-bindings/clock/marvell,pxa1908.h
@@ -0,0 +1,93 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause */
+#ifndef __DTS_MARVELL_PXA1908_CLOCK_H
+#define __DTS_MARVELL_PXA1908_CLOCK_H
+
+/* plls */
+#define PXA1908_CLK_CLK32		1
+#define PXA1908_CLK_VCTCXO		2
+#define PXA1908_CLK_PLL1_624		3
+#define PXA1908_CLK_PLL1_416		4
+#define PXA1908_CLK_PLL1_499		5
+#define PXA1908_CLK_PLL1_832		6
+#define PXA1908_CLK_PLL1_1248		7
+#define PXA1908_CLK_PLL1_D2		8
+#define PXA1908_CLK_PLL1_D4		9
+#define PXA1908_CLK_PLL1_D8		10
+#define PXA1908_CLK_PLL1_D16		11
+#define PXA1908_CLK_PLL1_D6		12
+#define PXA1908_CLK_PLL1_D12		13
+#define PXA1908_CLK_PLL1_D24		14
+#define PXA1908_CLK_PLL1_D48		15
+#define PXA1908_CLK_PLL1_D96		16
+#define PXA1908_CLK_PLL1_D13		17
+#define PXA1908_CLK_PLL1_32		18
+#define PXA1908_CLK_PLL1_208		19
+#define PXA1908_CLK_PLL1_117		20
+#define PXA1908_CLK_PLL1_416_GATE	21
+#define PXA1908_CLK_PLL1_624_GATE	22
+#define PXA1908_CLK_PLL1_832_GATE	23
+#define PXA1908_CLK_PLL1_1248_GATE	24
+#define PXA1908_CLK_PLL1_D2_GATE	25
+#define PXA1908_CLK_PLL1_499_EN		26
+#define PXA1908_CLK_PLL2VCO		27
+#define PXA1908_CLK_PLL2		28
+#define PXA1908_CLK_PLL2P		29
+#define PXA1908_CLK_PLL2VCODIV3		30
+#define PXA1908_CLK_PLL3VCO		31
+#define PXA1908_CLK_PLL3		32
+#define PXA1908_CLK_PLL3P		33
+#define PXA1908_CLK_PLL3VCODIV3		34
+#define PXA1908_CLK_PLL4VCO		35
+#define PXA1908_CLK_PLL4		36
+#define PXA1908_CLK_PLL4P		37
+#define PXA1908_CLK_PLL4VCODIV3		38
+#define PXA1908_MPMU_NR_CLKS		38
+
+/* apb (apbc) peripherals */
+#define PXA1908_CLK_UART0		1
+#define PXA1908_CLK_UART1		2
+#define PXA1908_CLK_GPIO		3
+#define PXA1908_CLK_PWM0		4
+#define PXA1908_CLK_PWM1		5
+#define PXA1908_CLK_PWM2		6
+#define PXA1908_CLK_PWM3		7
+#define PXA1908_CLK_SSP0		8
+#define PXA1908_CLK_SSP1		9
+#define PXA1908_CLK_IPC_RST		10
+#define PXA1908_CLK_RTC			11
+#define PXA1908_CLK_TWSI0		12
+#define PXA1908_CLK_KPC			13
+#define PXA1908_CLK_SWJTAG		17
+#define PXA1908_CLK_SSP2		20
+#define PXA1908_CLK_TWSI1		25
+#define PXA1908_CLK_THERMAL		28
+#define PXA1908_CLK_TWSI3		29
+#define PXA1908_APBC_NR_CLKS		48
+
+/* apb (apbcp) peripherals */
+#define PXA1908_CLK_UART2		7
+#define PXA1908_CLK_TWSI2		10
+#define PXA1908_CLK_AICER		14
+#define PXA1908_APBCP_NR_CLKS		14
+
+/* axi (apmu) peripherals */
+#define PXA1908_CLK_CCIC1		9
+#define PXA1908_CLK_ISP			14
+#define PXA1908_CLK_GATE_CTRL		16
+#define PXA1908_CLK_DSI1		17
+#define PXA1908_CLK_DISP1		19
+#define PXA1908_CLK_CCIC0		20
+#define PXA1908_CLK_SDH0		21
+#define PXA1908_CLK_SDH1		22
+#define PXA1908_CLK_SDH2		56
+#define PXA1908_CLK_USB			23
+#define PXA1908_CLK_NF			24
+#define PXA1908_CLK_CORE_DEBUG		36
+#define PXA1908_CLK_VPU			41
+#define PXA1908_CLK_GC			81
+#define PXA1908_CLK_GC2D		61
+#define PXA1908_CLK_TRACE		66
+#define PXA1908_CLK_DVC_DFC_DEBUG	81
+#define PXA1908_APMU_NR_CLKS		96
+
+#endif