| Message ID | 20230728195022.1198555-1-robh@kernel.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | watchdog: Enable COMPILE_TEST for more drivers | expand |
On 7/28/23 12:50, Rob Herring wrote: > There's quite a few watchdog drivers which are easily enabled for > COMPILE_TEST, so let's enable them. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Passed allyesconfig builds on arm, arm64, x86, riscv, powerpc, sparc Last time I tried this we ended up having to revert most of them. Let's see if this time is different. Reviewed-by: Guenter Roeck <linux@roeck-us.net> > --- > drivers/watchdog/Kconfig | 80 ++++++++++++++++---------------- > drivers/watchdog/loongson1_wdt.c | 1 + > 2 files changed, 41 insertions(+), 40 deletions(-) > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > index ee97d89dfc11..ce293378e548 100644 > --- a/drivers/watchdog/Kconfig > +++ b/drivers/watchdog/Kconfig > @@ -307,7 +307,7 @@ config XILINX_WATCHDOG > config XILINX_WINDOW_WATCHDOG > tristate "Xilinx window watchdog timer" > depends on HAS_IOMEM > - depends on ARM64 > + depends on ARM64 || COMPILE_TEST > select WATCHDOG_CORE > help > Window watchdog driver for the versal_wwdt IP core. > @@ -343,7 +343,7 @@ config RAVE_SP_WATCHDOG > > config MLX_WDT > tristate "Mellanox Watchdog" > - depends on MELLANOX_PLATFORM > + depends on MELLANOX_PLATFORM || COMPILE_TEST > select WATCHDOG_CORE > select REGMAP > help > @@ -493,7 +493,7 @@ config FTWDT010_WATCHDOG > > config IXP4XX_WATCHDOG > tristate "IXP4xx Watchdog" > - depends on ARCH_IXP4XX > + depends on ARCH_IXP4XX || (ARM && COMPILE_TEST) > select WATCHDOG_CORE > help > Say Y here if to include support for the watchdog timer > @@ -529,7 +529,7 @@ config S3C2410_WATCHDOG > > config SA1100_WATCHDOG > tristate "SA1100/PXA2xx watchdog" > - depends on ARCH_SA1100 || ARCH_PXA > + depends on ARCH_SA1100 || ARCH_PXA || COMPILE_TEST > help > Watchdog timer embedded into SA11x0 and PXA2xx chips. This will > reboot your system when timeout is reached. > @@ -720,7 +720,7 @@ config IMX2_WDT > config IMX_SC_WDT > tristate "IMX SC Watchdog" > depends on HAVE_ARM_SMCCC > - depends on IMX_SCU > + depends on IMX_SCU || COMPILE_TEST > select WATCHDOG_CORE > help > This is the driver for the system controller watchdog > @@ -931,7 +931,7 @@ config ASPEED_WATCHDOG > > config STM32_WATCHDOG > tristate "STM32 Independent WatchDoG (IWDG) support" > - depends on ARCH_STM32 > + depends on ARCH_STM32 || COMPILE_TEST > select WATCHDOG_CORE > default y > help > @@ -1065,7 +1065,7 @@ config ACQUIRE_WDT > > config ADVANTECH_WDT > tristate "Advantech SBC Watchdog Timer" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > If you are configuring a Linux kernel for the Advantech single-board > computer, say `Y' here to support its built-in watchdog timer > @@ -1074,14 +1074,14 @@ config ADVANTECH_WDT > > config ADVANTECH_EC_WDT > tristate "Advantech Embedded Controller Watchdog Timer" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > This driver supports Advantech products with ITE based Embedded Controller. > It does not support Advantech products with other ECs or without EC. > > config ALIM1535_WDT > tristate "ALi M1535 PMU Watchdog Timer" > - depends on X86 && PCI > + depends on (X86 || COMPILE_TEST) && PCI > help > This is the driver for the hardware watchdog on the ALi M1535 PMU. > > @@ -1105,7 +1105,7 @@ config ALIM7101_WDT > > config EBC_C384_WDT > tristate "WinSystems EBC-C384 Watchdog Timer" > - depends on X86 > + depends on X86 || COMPILE_TEST > select ISA_BUS_API > select WATCHDOG_CORE > help > @@ -1115,7 +1115,7 @@ config EBC_C384_WDT > > config EXAR_WDT > tristate "Exar Watchdog Timer" > - depends on X86 > + depends on X86 || COMPILE_TEST > select WATCHDOG_CORE > help > Enables watchdog timer support for the watchdog timer present > @@ -1126,7 +1126,7 @@ config EXAR_WDT > > config F71808E_WDT > tristate "Fintek F718xx, F818xx Super I/O Watchdog" > - depends on X86 > + depends on X86 || COMPILE_TEST > select WATCHDOG_CORE > help > This is the driver for the hardware watchdog on the Fintek F71808E, > @@ -1138,7 +1138,7 @@ config F71808E_WDT > > config SP5100_TCO > tristate "AMD/ATI SP5100 TCO Timer/Watchdog" > - depends on X86 && PCI > + depends on (X86 || COMPILE_TEST) && PCI > select WATCHDOG_CORE > help > Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO > @@ -1177,7 +1177,7 @@ config SC520_WDT > > config SBC_FITPC2_WATCHDOG > tristate "Compulab SBC-FITPC2 watchdog" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > This is the driver for the built-in watchdog timer on the fit-PC2, > fit-PC2i, CM-iAM single-board computers made by Compulab. > @@ -1202,7 +1202,7 @@ config SBC_FITPC2_WATCHDOG > > config EUROTECH_WDT > tristate "Eurotech CPU-1220/1410 Watchdog Timer" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > Enable support for the watchdog timer on the Eurotech CPU-1220 and > CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product > @@ -1210,7 +1210,7 @@ config EUROTECH_WDT > > config IB700_WDT > tristate "IB700 SBC Watchdog Timer" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > This is the driver for the hardware watchdog on the IB700 Single > Board Computer produced by TMC Technology (www.tmc-uk.com). This > @@ -1227,7 +1227,7 @@ config IB700_WDT > > config IBMASR > tristate "IBM Automatic Server Restart" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > This is the driver for the IBM Automatic Server Restart watchdog > timer built-in into some eServer xSeries machines. > @@ -1237,7 +1237,7 @@ config IBMASR > > config WAFER_WDT > tristate "ICP Single Board Computer Watchdog Timer" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > This is a driver for the hardware watchdog on the ICP Single > Board Computer. This driver is working on (at least) the following > @@ -1259,7 +1259,7 @@ config I6300ESB_WDT > > config IE6XX_WDT > tristate "Intel Atom E6xx Watchdog" > - depends on X86 && PCI > + depends on (X86 || COMPILE_TEST) && PCI > select WATCHDOG_CORE > select MFD_CORE > select LPC_SCH > @@ -1319,7 +1319,7 @@ config ITCO_VENDOR_SUPPORT > > config IT8712F_WDT > tristate "IT8712F (Smart Guardian) Watchdog Timer" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > This is the driver for the built-in watchdog timer on the IT8712F > Super I/0 chipset used on many motherboards. > @@ -1332,7 +1332,7 @@ config IT8712F_WDT > > config IT87_WDT > tristate "IT87 Watchdog Timer" > - depends on X86 > + depends on X86 || COMPILE_TEST > select WATCHDOG_CORE > help > This is the driver for the hardware watchdog on the ITE IT8607, > @@ -1350,7 +1350,7 @@ config IT87_WDT > config HP_WATCHDOG > tristate "HP ProLiant iLO2+ Hardware Watchdog Timer" > select WATCHDOG_CORE > - depends on (ARM64 || X86) && PCI > + depends on (ARM64 || X86 || COMPILE_TEST) && PCI > help > A software monitoring watchdog and NMI handling driver. This driver > will detect lockups and provide a stack trace. This is a driver that > @@ -1380,7 +1380,7 @@ config KEMPLD_WDT > > config SC1200_WDT > tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > This is a driver for National Semiconductor PC87307/PC97307 hardware > watchdog cards as found on the SC1200. This watchdog is mainly used > @@ -1403,7 +1403,7 @@ config SCx200_WDT > > config PC87413_WDT > tristate "NS PC87413 watchdog" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > This is the driver for the hardware watchdog on the PC87413 chipset > This watchdog simply watches your kernel to make sure it doesn't > @@ -1417,7 +1417,7 @@ config PC87413_WDT > > config NV_TCO > tristate "nVidia TCO Timer/Watchdog" > - depends on X86 && PCI > + depends on (X86 || COMPILE_TEST) && PCI > help > Hardware driver for the TCO timer built into the nVidia Hub family > (such as the MCP51). The TCO (Total Cost of Ownership) timer is a > @@ -1446,7 +1446,7 @@ config RDC321X_WDT > > config 60XX_WDT > tristate "SBC-60XX Watchdog Timer" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > This driver can be used with the watchdog timer found on some > single board computers, namely the 6010 PII based computer. > @@ -1486,7 +1486,7 @@ config SBC7240_WDT > > config CPU5_WDT > tristate "SMA CPU5 Watchdog" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > TBD. > To compile this driver as a module, choose M here: the > @@ -1494,7 +1494,7 @@ config CPU5_WDT > > config SMSC_SCH311X_WDT > tristate "SMSC SCH311X Watchdog Timer" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > This is the driver for the hardware watchdog timer on the > SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset > @@ -1506,7 +1506,7 @@ config SMSC_SCH311X_WDT > > config SMSC37B787_WDT > tristate "Winbond SMsC37B787 Watchdog Timer" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > This is the driver for the hardware watchdog component on the > Winbond SMsC37B787 chipset as used on the NetRunner Mainboard > @@ -1526,7 +1526,7 @@ config SMSC37B787_WDT > > config TQMX86_WDT > tristate "TQ-Systems TQMX86 Watchdog Timer" > - depends on X86 > + depends on X86 || COMPILE_TEST > select WATCHDOG_CORE > help > This is the driver for the hardware watchdog timer in the TQMX86 IO > @@ -1539,7 +1539,7 @@ config TQMX86_WDT > > config VIA_WDT > tristate "VIA Watchdog Timer" > - depends on X86 && PCI > + depends on (X86 || COMPILE_TEST) && PCI > select WATCHDOG_CORE > help > This is the driver for the hardware watchdog timer on VIA > @@ -1552,7 +1552,7 @@ config VIA_WDT > > config W83627HF_WDT > tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" > - depends on X86 > + depends on X86 || COMPILE_TEST > select WATCHDOG_CORE > help > This is the driver for the hardware watchdog on the following > @@ -1582,7 +1582,7 @@ config W83627HF_WDT > > config W83877F_WDT > tristate "W83877F (EMACS) Watchdog Timer" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > This is the driver for the hardware watchdog on the W83877F chipset > as used in EMACS PC-104 motherboards (and likely others). This > @@ -1597,7 +1597,7 @@ config W83877F_WDT > > config W83977F_WDT > tristate "W83977F (PCM-5335) Watchdog Timer" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > This is the driver for the hardware watchdog on the W83977F I/O chip > as used in AAEON's PCM-5335 SBC (and likely others). This > @@ -1610,7 +1610,7 @@ config W83977F_WDT > > config MACHZ_WDT > tristate "ZF MachZ Watchdog" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > If you are using a ZF Micro MachZ processor, say Y here, otherwise > N. This is the driver for the watchdog timer built-in on that > @@ -1623,7 +1623,7 @@ config MACHZ_WDT > > config SBC_EPX_C3_WATCHDOG > tristate "Winsystems SBC EPX-C3 watchdog" > - depends on X86 > + depends on X86 || COMPILE_TEST > help > This is the driver for the built-in watchdog timer on the EPX-C3 > Single-board computer made by Winsystems, Inc. > @@ -1738,7 +1738,7 @@ config INDYDOG > > config JZ4740_WDT > tristate "Ingenic jz4740 SoC hardware watchdog" > - depends on MIPS > + depends on MIPS || COMPILE_TEST > depends on COMMON_CLK > select WATCHDOG_CORE > select MFD_SYSCON > @@ -1822,7 +1822,7 @@ config BCM_KONA_WDT > > config BCM_KONA_WDT_DEBUG > bool "DEBUGFS support for BCM Kona Watchdog" > - depends on BCM_KONA_WDT > + depends on BCM_KONA_WDT || COMPILE_TEST > help > If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides > access to the driver's internal data structures as well as watchdog > @@ -1863,7 +1863,7 @@ config LANTIQ_WDT > > config LOONGSON1_WDT > tristate "Loongson1 SoC hardware watchdog" > - depends on MACH_LOONGSON32 > + depends on MACH_LOONGSON32 || COMPILE_TEST > select WATCHDOG_CORE > help > Hardware driver for the Loongson1 SoC Watchdog Timer. > @@ -1877,7 +1877,7 @@ config RALINK_WDT > > config GXP_WATCHDOG > tristate "HPE GXP watchdog support" > - depends on ARCH_HPE_GXP > + depends on ARCH_HPE_GXP || COMPILE_TEST > select WATCHDOG_CORE > help > Say Y here to include support for the watchdog timer > diff --git a/drivers/watchdog/loongson1_wdt.c b/drivers/watchdog/loongson1_wdt.c > index 4ac7810a314d..0587ff44d3a1 100644 > --- a/drivers/watchdog/loongson1_wdt.c > +++ b/drivers/watchdog/loongson1_wdt.c > @@ -4,6 +4,7 @@ > */ > > #include <linux/clk.h> > +#include <linux/io.h> > #include <linux/module.h> > #include <linux/of.h> > #include <linux/platform_device.h>
On Fri, Jul 28, 2023 at 01:50:21PM -0600, Rob Herring wrote: > There's quite a few watchdog drivers which are easily enabled for > COMPILE_TEST, so let's enable them. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Passed allyesconfig builds on arm, arm64, x86, riscv, powerpc, sparc Doing its job I suppose, the riscv patchwork automation stuff has spotted one new complaint for allmodconfig: stm32_iwdg.c:77:19: warning: unused function 'reg_read' [-Wunused-function]
On Sat, Jul 29, 2023 at 4:22 AM Conor Dooley <conor@kernel.org> wrote: > > On Fri, Jul 28, 2023 at 01:50:21PM -0600, Rob Herring wrote: > > There's quite a few watchdog drivers which are easily enabled for > > COMPILE_TEST, so let's enable them. > > > > Signed-off-by: Rob Herring <robh@kernel.org> > > --- > > Passed allyesconfig builds on arm, arm64, x86, riscv, powerpc, sparc > > Doing its job I suppose, the riscv patchwork automation stuff has > spotted one new complaint for allmodconfig: > stm32_iwdg.c:77:19: warning: unused function 'reg_read' [-Wunused-function] Looks like that's a clang W=1 warning only. Presumably it was already there before this patch with the right config. Rob
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index ee97d89dfc11..ce293378e548 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -307,7 +307,7 @@ config XILINX_WATCHDOG config XILINX_WINDOW_WATCHDOG tristate "Xilinx window watchdog timer" depends on HAS_IOMEM - depends on ARM64 + depends on ARM64 || COMPILE_TEST select WATCHDOG_CORE help Window watchdog driver for the versal_wwdt IP core. @@ -343,7 +343,7 @@ config RAVE_SP_WATCHDOG config MLX_WDT tristate "Mellanox Watchdog" - depends on MELLANOX_PLATFORM + depends on MELLANOX_PLATFORM || COMPILE_TEST select WATCHDOG_CORE select REGMAP help @@ -493,7 +493,7 @@ config FTWDT010_WATCHDOG config IXP4XX_WATCHDOG tristate "IXP4xx Watchdog" - depends on ARCH_IXP4XX + depends on ARCH_IXP4XX || (ARM && COMPILE_TEST) select WATCHDOG_CORE help Say Y here if to include support for the watchdog timer @@ -529,7 +529,7 @@ config S3C2410_WATCHDOG config SA1100_WATCHDOG tristate "SA1100/PXA2xx watchdog" - depends on ARCH_SA1100 || ARCH_PXA + depends on ARCH_SA1100 || ARCH_PXA || COMPILE_TEST help Watchdog timer embedded into SA11x0 and PXA2xx chips. This will reboot your system when timeout is reached. @@ -720,7 +720,7 @@ config IMX2_WDT config IMX_SC_WDT tristate "IMX SC Watchdog" depends on HAVE_ARM_SMCCC - depends on IMX_SCU + depends on IMX_SCU || COMPILE_TEST select WATCHDOG_CORE help This is the driver for the system controller watchdog @@ -931,7 +931,7 @@ config ASPEED_WATCHDOG config STM32_WATCHDOG tristate "STM32 Independent WatchDoG (IWDG) support" - depends on ARCH_STM32 + depends on ARCH_STM32 || COMPILE_TEST select WATCHDOG_CORE default y help @@ -1065,7 +1065,7 @@ config ACQUIRE_WDT config ADVANTECH_WDT tristate "Advantech SBC Watchdog Timer" - depends on X86 + depends on X86 || COMPILE_TEST help If you are configuring a Linux kernel for the Advantech single-board computer, say `Y' here to support its built-in watchdog timer @@ -1074,14 +1074,14 @@ config ADVANTECH_WDT config ADVANTECH_EC_WDT tristate "Advantech Embedded Controller Watchdog Timer" - depends on X86 + depends on X86 || COMPILE_TEST help This driver supports Advantech products with ITE based Embedded Controller. It does not support Advantech products with other ECs or without EC. config ALIM1535_WDT tristate "ALi M1535 PMU Watchdog Timer" - depends on X86 && PCI + depends on (X86 || COMPILE_TEST) && PCI help This is the driver for the hardware watchdog on the ALi M1535 PMU. @@ -1105,7 +1105,7 @@ config ALIM7101_WDT config EBC_C384_WDT tristate "WinSystems EBC-C384 Watchdog Timer" - depends on X86 + depends on X86 || COMPILE_TEST select ISA_BUS_API select WATCHDOG_CORE help @@ -1115,7 +1115,7 @@ config EBC_C384_WDT config EXAR_WDT tristate "Exar Watchdog Timer" - depends on X86 + depends on X86 || COMPILE_TEST select WATCHDOG_CORE help Enables watchdog timer support for the watchdog timer present @@ -1126,7 +1126,7 @@ config EXAR_WDT config F71808E_WDT tristate "Fintek F718xx, F818xx Super I/O Watchdog" - depends on X86 + depends on X86 || COMPILE_TEST select WATCHDOG_CORE help This is the driver for the hardware watchdog on the Fintek F71808E, @@ -1138,7 +1138,7 @@ config F71808E_WDT config SP5100_TCO tristate "AMD/ATI SP5100 TCO Timer/Watchdog" - depends on X86 && PCI + depends on (X86 || COMPILE_TEST) && PCI select WATCHDOG_CORE help Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO @@ -1177,7 +1177,7 @@ config SC520_WDT config SBC_FITPC2_WATCHDOG tristate "Compulab SBC-FITPC2 watchdog" - depends on X86 + depends on X86 || COMPILE_TEST help This is the driver for the built-in watchdog timer on the fit-PC2, fit-PC2i, CM-iAM single-board computers made by Compulab. @@ -1202,7 +1202,7 @@ config SBC_FITPC2_WATCHDOG config EUROTECH_WDT tristate "Eurotech CPU-1220/1410 Watchdog Timer" - depends on X86 + depends on X86 || COMPILE_TEST help Enable support for the watchdog timer on the Eurotech CPU-1220 and CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product @@ -1210,7 +1210,7 @@ config EUROTECH_WDT config IB700_WDT tristate "IB700 SBC Watchdog Timer" - depends on X86 + depends on X86 || COMPILE_TEST help This is the driver for the hardware watchdog on the IB700 Single Board Computer produced by TMC Technology (www.tmc-uk.com). This @@ -1227,7 +1227,7 @@ config IB700_WDT config IBMASR tristate "IBM Automatic Server Restart" - depends on X86 + depends on X86 || COMPILE_TEST help This is the driver for the IBM Automatic Server Restart watchdog timer built-in into some eServer xSeries machines. @@ -1237,7 +1237,7 @@ config IBMASR config WAFER_WDT tristate "ICP Single Board Computer Watchdog Timer" - depends on X86 + depends on X86 || COMPILE_TEST help This is a driver for the hardware watchdog on the ICP Single Board Computer. This driver is working on (at least) the following @@ -1259,7 +1259,7 @@ config I6300ESB_WDT config IE6XX_WDT tristate "Intel Atom E6xx Watchdog" - depends on X86 && PCI + depends on (X86 || COMPILE_TEST) && PCI select WATCHDOG_CORE select MFD_CORE select LPC_SCH @@ -1319,7 +1319,7 @@ config ITCO_VENDOR_SUPPORT config IT8712F_WDT tristate "IT8712F (Smart Guardian) Watchdog Timer" - depends on X86 + depends on X86 || COMPILE_TEST help This is the driver for the built-in watchdog timer on the IT8712F Super I/0 chipset used on many motherboards. @@ -1332,7 +1332,7 @@ config IT8712F_WDT config IT87_WDT tristate "IT87 Watchdog Timer" - depends on X86 + depends on X86 || COMPILE_TEST select WATCHDOG_CORE help This is the driver for the hardware watchdog on the ITE IT8607, @@ -1350,7 +1350,7 @@ config IT87_WDT config HP_WATCHDOG tristate "HP ProLiant iLO2+ Hardware Watchdog Timer" select WATCHDOG_CORE - depends on (ARM64 || X86) && PCI + depends on (ARM64 || X86 || COMPILE_TEST) && PCI help A software monitoring watchdog and NMI handling driver. This driver will detect lockups and provide a stack trace. This is a driver that @@ -1380,7 +1380,7 @@ config KEMPLD_WDT config SC1200_WDT tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" - depends on X86 + depends on X86 || COMPILE_TEST help This is a driver for National Semiconductor PC87307/PC97307 hardware watchdog cards as found on the SC1200. This watchdog is mainly used @@ -1403,7 +1403,7 @@ config SCx200_WDT config PC87413_WDT tristate "NS PC87413 watchdog" - depends on X86 + depends on X86 || COMPILE_TEST help This is the driver for the hardware watchdog on the PC87413 chipset This watchdog simply watches your kernel to make sure it doesn't @@ -1417,7 +1417,7 @@ config PC87413_WDT config NV_TCO tristate "nVidia TCO Timer/Watchdog" - depends on X86 && PCI + depends on (X86 || COMPILE_TEST) && PCI help Hardware driver for the TCO timer built into the nVidia Hub family (such as the MCP51). The TCO (Total Cost of Ownership) timer is a @@ -1446,7 +1446,7 @@ config RDC321X_WDT config 60XX_WDT tristate "SBC-60XX Watchdog Timer" - depends on X86 + depends on X86 || COMPILE_TEST help This driver can be used with the watchdog timer found on some single board computers, namely the 6010 PII based computer. @@ -1486,7 +1486,7 @@ config SBC7240_WDT config CPU5_WDT tristate "SMA CPU5 Watchdog" - depends on X86 + depends on X86 || COMPILE_TEST help TBD. To compile this driver as a module, choose M here: the @@ -1494,7 +1494,7 @@ config CPU5_WDT config SMSC_SCH311X_WDT tristate "SMSC SCH311X Watchdog Timer" - depends on X86 + depends on X86 || COMPILE_TEST help This is the driver for the hardware watchdog timer on the SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset @@ -1506,7 +1506,7 @@ config SMSC_SCH311X_WDT config SMSC37B787_WDT tristate "Winbond SMsC37B787 Watchdog Timer" - depends on X86 + depends on X86 || COMPILE_TEST help This is the driver for the hardware watchdog component on the Winbond SMsC37B787 chipset as used on the NetRunner Mainboard @@ -1526,7 +1526,7 @@ config SMSC37B787_WDT config TQMX86_WDT tristate "TQ-Systems TQMX86 Watchdog Timer" - depends on X86 + depends on X86 || COMPILE_TEST select WATCHDOG_CORE help This is the driver for the hardware watchdog timer in the TQMX86 IO @@ -1539,7 +1539,7 @@ config TQMX86_WDT config VIA_WDT tristate "VIA Watchdog Timer" - depends on X86 && PCI + depends on (X86 || COMPILE_TEST) && PCI select WATCHDOG_CORE help This is the driver for the hardware watchdog timer on VIA @@ -1552,7 +1552,7 @@ config VIA_WDT config W83627HF_WDT tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" - depends on X86 + depends on X86 || COMPILE_TEST select WATCHDOG_CORE help This is the driver for the hardware watchdog on the following @@ -1582,7 +1582,7 @@ config W83627HF_WDT config W83877F_WDT tristate "W83877F (EMACS) Watchdog Timer" - depends on X86 + depends on X86 || COMPILE_TEST help This is the driver for the hardware watchdog on the W83877F chipset as used in EMACS PC-104 motherboards (and likely others). This @@ -1597,7 +1597,7 @@ config W83877F_WDT config W83977F_WDT tristate "W83977F (PCM-5335) Watchdog Timer" - depends on X86 + depends on X86 || COMPILE_TEST help This is the driver for the hardware watchdog on the W83977F I/O chip as used in AAEON's PCM-5335 SBC (and likely others). This @@ -1610,7 +1610,7 @@ config W83977F_WDT config MACHZ_WDT tristate "ZF MachZ Watchdog" - depends on X86 + depends on X86 || COMPILE_TEST help If you are using a ZF Micro MachZ processor, say Y here, otherwise N. This is the driver for the watchdog timer built-in on that @@ -1623,7 +1623,7 @@ config MACHZ_WDT config SBC_EPX_C3_WATCHDOG tristate "Winsystems SBC EPX-C3 watchdog" - depends on X86 + depends on X86 || COMPILE_TEST help This is the driver for the built-in watchdog timer on the EPX-C3 Single-board computer made by Winsystems, Inc. @@ -1738,7 +1738,7 @@ config INDYDOG config JZ4740_WDT tristate "Ingenic jz4740 SoC hardware watchdog" - depends on MIPS + depends on MIPS || COMPILE_TEST depends on COMMON_CLK select WATCHDOG_CORE select MFD_SYSCON @@ -1822,7 +1822,7 @@ config BCM_KONA_WDT config BCM_KONA_WDT_DEBUG bool "DEBUGFS support for BCM Kona Watchdog" - depends on BCM_KONA_WDT + depends on BCM_KONA_WDT || COMPILE_TEST help If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides access to the driver's internal data structures as well as watchdog @@ -1863,7 +1863,7 @@ config LANTIQ_WDT config LOONGSON1_WDT tristate "Loongson1 SoC hardware watchdog" - depends on MACH_LOONGSON32 + depends on MACH_LOONGSON32 || COMPILE_TEST select WATCHDOG_CORE help Hardware driver for the Loongson1 SoC Watchdog Timer. @@ -1877,7 +1877,7 @@ config RALINK_WDT config GXP_WATCHDOG tristate "HPE GXP watchdog support" - depends on ARCH_HPE_GXP + depends on ARCH_HPE_GXP || COMPILE_TEST select WATCHDOG_CORE help Say Y here to include support for the watchdog timer diff --git a/drivers/watchdog/loongson1_wdt.c b/drivers/watchdog/loongson1_wdt.c index 4ac7810a314d..0587ff44d3a1 100644 --- a/drivers/watchdog/loongson1_wdt.c +++ b/drivers/watchdog/loongson1_wdt.c @@ -4,6 +4,7 @@ */ #include <linux/clk.h> +#include <linux/io.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h>
There's quite a few watchdog drivers which are easily enabled for COMPILE_TEST, so let's enable them. Signed-off-by: Rob Herring <robh@kernel.org> --- Passed allyesconfig builds on arm, arm64, x86, riscv, powerpc, sparc --- drivers/watchdog/Kconfig | 80 ++++++++++++++++---------------- drivers/watchdog/loongson1_wdt.c | 1 + 2 files changed, 41 insertions(+), 40 deletions(-)