diff mbox series

[v10,2/3] ublk: move check for empty address field on command submission

Message ID 20230803140701.18515-3-nmi@metaspace.dk (mailing list archive)
State New, archived
Headers show
Series ublk: enable zoned storage support | expand

Commit Message

Andreas Hindborg Aug. 3, 2023, 2:07 p.m. UTC
From: Andreas Hindborg <a.hindborg@samsung.com>

In preparation for zoned storage support, move the check for empty `addr`
field into the command handler case statement. Note that the check makes no
sense for `UBLK_IO_NEED_GET_DATA` because the `addr` field must always be
set for this command.

Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
---
 drivers/block/ublk_drv.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

Comments

Ming Lei Aug. 4, 2023, 9:01 a.m. UTC | #1
Hi Andreas,

On Thu, Aug 03, 2023 at 04:07:00PM +0200, Andreas Hindborg (Samsung) wrote:
> From: Andreas Hindborg <a.hindborg@samsung.com>
> 
> In preparation for zoned storage support, move the check for empty `addr`
> field into the command handler case statement. Note that the check makes no
> sense for `UBLK_IO_NEED_GET_DATA` because the `addr` field must always be
> set for this command.
> 
> Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
> ---
>  drivers/block/ublk_drv.c | 18 +++++++++++++-----
>  1 file changed, 13 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
> index db3523e281a6..5a1ee17636ac 100644
> --- a/drivers/block/ublk_drv.c
> +++ b/drivers/block/ublk_drv.c
> @@ -1419,11 +1419,6 @@ static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
>  			^ (_IOC_NR(cmd_op) == UBLK_IO_NEED_GET_DATA))
>  		goto out;
>  
> -	if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
> -		ret = -EINVAL;
> -		goto out;
> -	}
> -
>  	ret = ublk_check_cmd_op(cmd_op);
>  	if (ret)
>  		goto out;
> @@ -1452,6 +1447,12 @@ static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
>  				goto out;
>  		}
>  
> +		/* User copy requires addr to be unset */
> +		if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
> +			ret = -EINVAL;
> +			goto out;
> +		}
> +

Given you have to post v11 for fixing build issue, please convert the
above two 'if' into one 'if else':

		if (!ublk_support_user_copy(ubq)) {
			/*
			 * FETCH_RQ has to provide IO buffer if NEED GET
			 * DATA is not enabled
			 */
			if (!ub_cmd->addr && !ublk_need_get_data(ubq))
				goto out;
		} else {
			if (ub_cmd->addr) {
				ret = -EINVAL;
				goto out;
			}
		}

>  		ublk_fill_io_cmd(io, cmd, ub_cmd->addr);
>  		ublk_mark_io_ready(ub, ubq);
>  		break;
> @@ -1470,6 +1471,13 @@ static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
>  						req_op(req) == REQ_OP_READ))
>  				goto out;
>  		}
> +
> +		/* User copy requires addr to be unset */
> +		if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
> +			ret = -EINVAL;
> +			goto out;
> +		}
> +

Same with above.

BTW, I have verified this patchset with ublk-zoned example in
libublk-rs:

https://github.com/ming1/libublk-rs/tree/zoned.v2

cargo run --example zoned -- add -1 10240
mkfs.btrfs -O zoned /dev/ublkb0
mount & git clone linux-kernel &umount

Hope V11 can be merged.


Thanks,
Ming
Andreas Hindborg Aug. 4, 2023, 10:08 a.m. UTC | #2
Ming Lei <tom.leiming@gmail.com> writes:

> Hi Andreas,
>
> On Thu, Aug 03, 2023 at 04:07:00PM +0200, Andreas Hindborg (Samsung) wrote:
>> From: Andreas Hindborg <a.hindborg@samsung.com>
>> 
>> In preparation for zoned storage support, move the check for empty `addr`
>> field into the command handler case statement. Note that the check makes no
>> sense for `UBLK_IO_NEED_GET_DATA` because the `addr` field must always be
>> set for this command.
>> 
>> Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
>> ---
>>  drivers/block/ublk_drv.c | 18 +++++++++++++-----
>>  1 file changed, 13 insertions(+), 5 deletions(-)
>> 
>> diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
>> index db3523e281a6..5a1ee17636ac 100644
>> --- a/drivers/block/ublk_drv.c
>> +++ b/drivers/block/ublk_drv.c
>> @@ -1419,11 +1419,6 @@ static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
>>  			^ (_IOC_NR(cmd_op) == UBLK_IO_NEED_GET_DATA))
>>  		goto out;
>>  
>> -	if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
>> -		ret = -EINVAL;
>> -		goto out;
>> -	}
>> -
>>  	ret = ublk_check_cmd_op(cmd_op);
>>  	if (ret)
>>  		goto out;
>> @@ -1452,6 +1447,12 @@ static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
>>  				goto out;
>>  		}
>>  
>> +		/* User copy requires addr to be unset */
>> +		if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
>> +			ret = -EINVAL;
>> +			goto out;
>> +		}
>> +
>
> Given you have to post v11 for fixing build issue, please convert the
> above two 'if' into one 'if else':
>
> 		if (!ublk_support_user_copy(ubq)) {
> 			/*
> 			 * FETCH_RQ has to provide IO buffer if NEED GET
> 			 * DATA is not enabled
> 			 */
> 			if (!ub_cmd->addr && !ublk_need_get_data(ubq))
> 				goto out;
> 		} else {
> 			if (ub_cmd->addr) {
> 				ret = -EINVAL;
> 				goto out;
> 			}
> 		}

Alright. I was debating with myself one over the other 
diff mbox series

Patch

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index db3523e281a6..5a1ee17636ac 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -1419,11 +1419,6 @@  static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
 			^ (_IOC_NR(cmd_op) == UBLK_IO_NEED_GET_DATA))
 		goto out;
 
-	if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
-		ret = -EINVAL;
-		goto out;
-	}
-
 	ret = ublk_check_cmd_op(cmd_op);
 	if (ret)
 		goto out;
@@ -1452,6 +1447,12 @@  static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
 				goto out;
 		}
 
+		/* User copy requires addr to be unset */
+		if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
+			ret = -EINVAL;
+			goto out;
+		}
+
 		ublk_fill_io_cmd(io, cmd, ub_cmd->addr);
 		ublk_mark_io_ready(ub, ubq);
 		break;
@@ -1470,6 +1471,13 @@  static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
 						req_op(req) == REQ_OP_READ))
 				goto out;
 		}
+
+		/* User copy requires addr to be unset */
+		if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
+			ret = -EINVAL;
+			goto out;
+		}
+
 		ublk_fill_io_cmd(io, cmd, ub_cmd->addr);
 		ublk_commit_completion(ub, ub_cmd);
 		break;