| Message ID | 20230803080441.367341-6-j-choudhary@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Enable Display for J784S4 and AM69-SK platform | expand |
On 03-Aug-23 13:34, Jayesh Choudhary wrote: > From: Dasnavis Sabiya <sabiya.d@ti.com> > > AM69 starter kit features an HDMI port and an eDP port. > > Add assigned clocks for DSS, DT node for DisplayPort PHY, > pinmux for HDMI hotplug and power down, mcu_i2c1 and dss_vout > for HDMI. > Also enable Serdes4 settings for DP display. > > Add the endpoint nodes to describe connection from: > DSS => MHDP => DisplayPort connector > DSS => TI TFP410 DPI-to-DVI Bridge => HDMI connector > > Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> > [j-choudhary@ti.com: Fix dvi-bridge, dss, mhdp and serdes-refclk] > Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com> > --- > arch/arm64/boot/dts/ti/k3-am69-sk.dts | 234 ++++++++++++++++++++++++++ > 1 file changed, 234 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts > index d282c2c633c1..d6d6b7aa9daf 100644 > --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts > +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts > @@ -107,6 +107,76 @@ vdd_sd_dv: regulator-tlv71033 { > states = <1800000 0x0>, > <3300000 0x1>; > }; > + > + dp0_pwr_3v3: regulator-dp0-pwr { > + compatible = "regulator-fixed"; > + regulator-name = "dp0-pwr"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&dp_pwr_en_pins_default>; > + gpio = <&main_gpio0 4 0>; /* DP0_3V3 _EN */ > + enable-active-high; > + }; > + > + dp0: connector-dp0 { > + compatible = "dp-connector"; > + label = "DP0"; > + type = "full-size"; > + dp-pwr-supply = <&dp0_pwr_3v3>; > + > + port { > + dp0_connector_in: endpoint { > + remote-endpoint = <&dp0_out>; > + }; > + }; > + }; > + > + connector-hdmi { > + compatible = "hdmi-connector"; > + label = "hdmi"; > + type = "a"; > + pinctrl-names = "default"; > + pinctrl-0 = <&hdmi_hpd_pins_default>; > + ddc-i2c-bus = <&mcu_i2c1>; > + hpd-gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>; /* HDMI_HPD */ > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&tfp410_out>; > + }; > + }; > + }; > + > + bridge-dvi { > + compatible = "ti,tfp410"; > + pinctrl-names = "default"; > + pinctrl-0 = <&hdmi_pdn_pins_default>; > + powerdown-gpios = <&wkup_gpio0 14 GPIO_ACTIVE_LOW>; /* HDMI_PDn */ > + ti,deskew = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + tfp410_in: endpoint { > + remote-endpoint = <&dpi1_out0>; > + pclk-sample = <1>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + tfp410_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > + }; > + }; > + }; > }; > > &main_pmx0 { > @@ -161,6 +231,57 @@ J784S4_IOPAD(0x008, PIN_INPUT, 7) /* (AJ33) MCAN12_RX.GPIO0_2 */ > J784S4_IOPAD(0x004, PIN_INPUT, 7) /* (AG36) MCAN12_TX.GPIO0_1 */ > >; > }; > + > + dp0_pins_default: dp0-default-pins { > + pinctrl-single,pins = < > + J784S4_IOPAD(0x014, PIN_INPUT, 13) /* (AG33) MCAN14_TX.DP0_HPD */ > + >; > + }; > + > + dp_pwr_en_pins_default: dp-pwr-en-default-pins { > + pinctrl-single,pins = < > + J784S4_IOPAD(0x010, PIN_INPUT, 7) /* (AH33) MCAN13_RX.GPIO0_4 */ > + >; > + }; > + > + dss_vout0_pins_default: dss-vout0-default-pins { > + pinctrl-single,pins = < > + J784S4_IOPAD(0x074, PIN_OUTPUT, 2) /* (AC33) MCAN2_TX.VOUT0_DATA0 */ > + J784S4_IOPAD(0x070, PIN_OUTPUT, 2) /* (AH38) MCAN1_RX.VOUT0_DATA1 */ > + J784S4_IOPAD(0x07c, PIN_OUTPUT, 2) /* (AJ38) MCASP0_AXR3.VOUT0_DATA2 */ > + J784S4_IOPAD(0x068, PIN_OUTPUT, 2) /* (AE38) MCAN0_RX.VOUT0_DATA3 */ > + J784S4_IOPAD(0x064, PIN_OUTPUT, 2) /* (AF38) MCAN0_TX.VOUT0_DATA4 */ > + J784S4_IOPAD(0x060, PIN_OUTPUT, 2) /* (AE36) MCASP2_AXR1.VOUT0_DATA5 */ > + J784S4_IOPAD(0x05c, PIN_OUTPUT, 2) /* (AC36) MCASP2_AXR0.VOUT0_DATA6 */ > + J784S4_IOPAD(0x058, PIN_OUTPUT, 2) /* (AE37) MCASP2_AFSX.VOUT0_DATA7 */ > + J784S4_IOPAD(0x054, PIN_OUTPUT, 2) /* (AD37) MCASP2_ACLKX.VOUT0_DATA8 */ > + J784S4_IOPAD(0x050, PIN_OUTPUT, 2) /* (AC37) MCASP1_AXR2.VOUT0_DATA9 */ > + J784S4_IOPAD(0x04c, PIN_OUTPUT, 2) /* (AC32) MCASP1_AXR1.VOUT0_DATA10 */ > + J784S4_IOPAD(0x048, PIN_OUTPUT, 2) /* (AK33) MCASP0_AXR2.VOUT0_DATA11 */ > + J784S4_IOPAD(0x044, PIN_OUTPUT, 2) /* (AG37) MCASP0_AXR1.VOUT0_DATA12 */ > + J784S4_IOPAD(0x040, PIN_OUTPUT, 2) /* (AF37) MCASP0_AXR0.VOUT0_DATA13 */ > + J784S4_IOPAD(0x03c, PIN_OUTPUT, 2) /* (AK38) MCASP0_AFSX.VOUT0_DATA14 */ > + J784S4_IOPAD(0x038, PIN_OUTPUT, 2) /* (AK35) MCASP0_ACLKX.VOUT0_DATA15 */ > + J784S4_IOPAD(0x0c8, PIN_OUTPUT, 2) /* (AJ32) EXT_REFCLK1.VOUT0_DATA16 */ > + J784S4_IOPAD(0x030, PIN_OUTPUT, 2) /* (AK37) GPIO0_12.VOUT0_DATA17 */ > + J784S4_IOPAD(0x02c, PIN_OUTPUT, 2) /* (AL32) GPIO0_11.VOUT0_DATA18 */ > + J784S4_IOPAD(0x028, PIN_OUTPUT, 2) /* (AE33) MCAN16_RX.VOUT0_DATA19 */ > + J784S4_IOPAD(0x024, PIN_OUTPUT, 2) /* (AH34) MCAN16_TX.VOUT0_DATA20 */ > + J784S4_IOPAD(0x020, PIN_OUTPUT, 2) /* (AJ35) MCAN15_RX.VOUT0_DATA21 */ > + J784S4_IOPAD(0x01c, PIN_OUTPUT, 2) /* (AG34) MCAN15_TX.VOUT0_DATA22 */ > + J784S4_IOPAD(0x018, PIN_OUTPUT, 2) /* (AK36) MCAN14_RX.VOUT0_DATA23 */ > + J784S4_IOPAD(0x084, PIN_OUTPUT, 2) /* (AG38) MCASP0_AXR5.VOUT0_DE */ > + J784S4_IOPAD(0x080, PIN_OUTPUT, 2) /* (AK34) MCASP0_AXR4.VOUT0_HSYNC */ > + J784S4_IOPAD(0x078, PIN_OUTPUT, 2) /* (AH37) MCAN2_RX.VOUT0_PCLK */ > + J784S4_IOPAD(0x088, PIN_OUTPUT, 2) /* (AF36) MCASP0_AXR6.VOUT0_VSYNC */ > + >; > + }; > + > + hdmi_hpd_pins_default: hdmi-hpd-default-pins { > + pinctrl-single,pins = < > + J784S4_IOPAD(0x000, PIN_INPUT, 7) /* (AN35) EXTINTN.GPIO0_0 */ > + >; > + }; > }; > > &wkup_pmx2 { > @@ -231,6 +352,21 @@ J784S4_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (J36) WKUP_GPIO0_3 */ > J784S4_WKUP_IOPAD(0x11c, PIN_INPUT, 7) /* (M34) WKUP_GPIO0_67 */ > >; > }; > + > + mcu_i2c1_pins_default: mcu-i2c1-default-pins { > + pinctrl-single,pins = < > + /* (L35) WKUP_GPIO0_8.MCU_I2C1_SCL */ > + J784S4_WKUP_IOPAD(0x078, PIN_INPUT_PULLUP, 0) > + /* (L34) WKUP_GPIO0_9.MCU_I2C1_SDA */ > + J784S4_WKUP_IOPAD(0x07c, PIN_INPUT_PULLUP, 0) > + >; > + }; > + > + hdmi_pdn_pins_default: hdmi-pdn-default-pins { > + pinctrl-single,pins = < > + J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 7) /* (H37) WKUP_GPIO0_14 */ > + >; > + }; > }; > > &wkup_pmx3 { > @@ -350,3 +486,101 @@ &mcu_cpsw_port1 { > phy-mode = "rgmii-rxid"; > phy-handle = <&mcu_phy0>; > }; > + > +&wkup_gpio_intr { > + status = "okay"; > +}; > + > +&mcu_i2c1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&mcu_i2c1_pins_default>; > + clock-frequency = <100000>; > +}; > + > +&serdes_refclk { > + status = "okay"; > + clock-frequency = <100000000>; > +}; > + > +&dss { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&dss_vout0_pins_default>; > + assigned-clocks = <&k3_clks 218 2>, > + <&k3_clks 218 5>, > + <&k3_clks 218 14>, > + <&k3_clks 218 18>; > + assigned-clock-parents = <&k3_clks 218 3>, > + <&k3_clks 218 7>, > + <&k3_clks 218 16>, > + <&k3_clks 218 22>; > +}; > + > +&serdes_wiz4 { > + status = "okay"; > +}; > + > +&serdes4 { > + status = "okay"; > + serdes4_dp_link: phy@0 { > + reg = <0>; > + cdns,num-lanes = <4>; > + #phy-cells = <0>; > + cdns,phy-type = <PHY_TYPE_DP>; > + resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>, > + <&serdes_wiz4 3>, <&serdes_wiz4 4>; > + }; > +}; > + > +&mhdp { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&dp0_pins_default>; > + phys = <&serdes4_dp_link>; > + phy-names = "dpphy"; > +}; > + > +&dss_ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* DP */ > + port@0 { > + reg = <0>; > + > + dpi0_out: endpoint { > + remote-endpoint = <&dp0_in>; > + }; > + }; > + > + /* HDMI */ > + port@1 { > + reg = <1>; > + > + dpi1_out0: endpoint { > + remote-endpoint = <&tfp410_in>; > + }; > + }; > +}; > + > +&dp0_ports { > + #address-cells = <1>; > + #size-cells = <0>;> + > + port@0 { > + reg = <0>; > + > + dp0_in: endpoint { > + remote-endpoint = <&dpi0_out>; > + }; > + }; > + > + port@4 { > + reg = <4>; > + > + dp0_out: endpoint { > + remote-endpoint = <&dp0_connector_in>; > + }; > + }; > +};
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index d282c2c633c1..d6d6b7aa9daf 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -107,6 +107,76 @@ vdd_sd_dv: regulator-tlv71033 { states = <1800000 0x0>, <3300000 0x1>; }; + + dp0_pwr_3v3: regulator-dp0-pwr { + compatible = "regulator-fixed"; + regulator-name = "dp0-pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&dp_pwr_en_pins_default>; + gpio = <&main_gpio0 4 0>; /* DP0_3V3 _EN */ + enable-active-high; + }; + + dp0: connector-dp0 { + compatible = "dp-connector"; + label = "DP0"; + type = "full-size"; + dp-pwr-supply = <&dp0_pwr_3v3>; + + port { + dp0_connector_in: endpoint { + remote-endpoint = <&dp0_out>; + }; + }; + }; + + connector-hdmi { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_pins_default>; + ddc-i2c-bus = <&mcu_i2c1>; + hpd-gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>; /* HDMI_HPD */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + + bridge-dvi { + compatible = "ti,tfp410"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pdn_pins_default>; + powerdown-gpios = <&wkup_gpio0 14 GPIO_ACTIVE_LOW>; /* HDMI_PDn */ + ti,deskew = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint { + remote-endpoint = <&dpi1_out0>; + pclk-sample = <1>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; }; &main_pmx0 { @@ -161,6 +231,57 @@ J784S4_IOPAD(0x008, PIN_INPUT, 7) /* (AJ33) MCAN12_RX.GPIO0_2 */ J784S4_IOPAD(0x004, PIN_INPUT, 7) /* (AG36) MCAN12_TX.GPIO0_1 */ >; }; + + dp0_pins_default: dp0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x014, PIN_INPUT, 13) /* (AG33) MCAN14_TX.DP0_HPD */ + >; + }; + + dp_pwr_en_pins_default: dp-pwr-en-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x010, PIN_INPUT, 7) /* (AH33) MCAN13_RX.GPIO0_4 */ + >; + }; + + dss_vout0_pins_default: dss-vout0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x074, PIN_OUTPUT, 2) /* (AC33) MCAN2_TX.VOUT0_DATA0 */ + J784S4_IOPAD(0x070, PIN_OUTPUT, 2) /* (AH38) MCAN1_RX.VOUT0_DATA1 */ + J784S4_IOPAD(0x07c, PIN_OUTPUT, 2) /* (AJ38) MCASP0_AXR3.VOUT0_DATA2 */ + J784S4_IOPAD(0x068, PIN_OUTPUT, 2) /* (AE38) MCAN0_RX.VOUT0_DATA3 */ + J784S4_IOPAD(0x064, PIN_OUTPUT, 2) /* (AF38) MCAN0_TX.VOUT0_DATA4 */ + J784S4_IOPAD(0x060, PIN_OUTPUT, 2) /* (AE36) MCASP2_AXR1.VOUT0_DATA5 */ + J784S4_IOPAD(0x05c, PIN_OUTPUT, 2) /* (AC36) MCASP2_AXR0.VOUT0_DATA6 */ + J784S4_IOPAD(0x058, PIN_OUTPUT, 2) /* (AE37) MCASP2_AFSX.VOUT0_DATA7 */ + J784S4_IOPAD(0x054, PIN_OUTPUT, 2) /* (AD37) MCASP2_ACLKX.VOUT0_DATA8 */ + J784S4_IOPAD(0x050, PIN_OUTPUT, 2) /* (AC37) MCASP1_AXR2.VOUT0_DATA9 */ + J784S4_IOPAD(0x04c, PIN_OUTPUT, 2) /* (AC32) MCASP1_AXR1.VOUT0_DATA10 */ + J784S4_IOPAD(0x048, PIN_OUTPUT, 2) /* (AK33) MCASP0_AXR2.VOUT0_DATA11 */ + J784S4_IOPAD(0x044, PIN_OUTPUT, 2) /* (AG37) MCASP0_AXR1.VOUT0_DATA12 */ + J784S4_IOPAD(0x040, PIN_OUTPUT, 2) /* (AF37) MCASP0_AXR0.VOUT0_DATA13 */ + J784S4_IOPAD(0x03c, PIN_OUTPUT, 2) /* (AK38) MCASP0_AFSX.VOUT0_DATA14 */ + J784S4_IOPAD(0x038, PIN_OUTPUT, 2) /* (AK35) MCASP0_ACLKX.VOUT0_DATA15 */ + J784S4_IOPAD(0x0c8, PIN_OUTPUT, 2) /* (AJ32) EXT_REFCLK1.VOUT0_DATA16 */ + J784S4_IOPAD(0x030, PIN_OUTPUT, 2) /* (AK37) GPIO0_12.VOUT0_DATA17 */ + J784S4_IOPAD(0x02c, PIN_OUTPUT, 2) /* (AL32) GPIO0_11.VOUT0_DATA18 */ + J784S4_IOPAD(0x028, PIN_OUTPUT, 2) /* (AE33) MCAN16_RX.VOUT0_DATA19 */ + J784S4_IOPAD(0x024, PIN_OUTPUT, 2) /* (AH34) MCAN16_TX.VOUT0_DATA20 */ + J784S4_IOPAD(0x020, PIN_OUTPUT, 2) /* (AJ35) MCAN15_RX.VOUT0_DATA21 */ + J784S4_IOPAD(0x01c, PIN_OUTPUT, 2) /* (AG34) MCAN15_TX.VOUT0_DATA22 */ + J784S4_IOPAD(0x018, PIN_OUTPUT, 2) /* (AK36) MCAN14_RX.VOUT0_DATA23 */ + J784S4_IOPAD(0x084, PIN_OUTPUT, 2) /* (AG38) MCASP0_AXR5.VOUT0_DE */ + J784S4_IOPAD(0x080, PIN_OUTPUT, 2) /* (AK34) MCASP0_AXR4.VOUT0_HSYNC */ + J784S4_IOPAD(0x078, PIN_OUTPUT, 2) /* (AH37) MCAN2_RX.VOUT0_PCLK */ + J784S4_IOPAD(0x088, PIN_OUTPUT, 2) /* (AF36) MCASP0_AXR6.VOUT0_VSYNC */ + >; + }; + + hdmi_hpd_pins_default: hdmi-hpd-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x000, PIN_INPUT, 7) /* (AN35) EXTINTN.GPIO0_0 */ + >; + }; }; &wkup_pmx2 { @@ -231,6 +352,21 @@ J784S4_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (J36) WKUP_GPIO0_3 */ J784S4_WKUP_IOPAD(0x11c, PIN_INPUT, 7) /* (M34) WKUP_GPIO0_67 */ >; }; + + mcu_i2c1_pins_default: mcu-i2c1-default-pins { + pinctrl-single,pins = < + /* (L35) WKUP_GPIO0_8.MCU_I2C1_SCL */ + J784S4_WKUP_IOPAD(0x078, PIN_INPUT_PULLUP, 0) + /* (L34) WKUP_GPIO0_9.MCU_I2C1_SDA */ + J784S4_WKUP_IOPAD(0x07c, PIN_INPUT_PULLUP, 0) + >; + }; + + hdmi_pdn_pins_default: hdmi-pdn-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 7) /* (H37) WKUP_GPIO0_14 */ + >; + }; }; &wkup_pmx3 { @@ -350,3 +486,101 @@ &mcu_cpsw_port1 { phy-mode = "rgmii-rxid"; phy-handle = <&mcu_phy0>; }; + +&wkup_gpio_intr { + status = "okay"; +}; + +&mcu_i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_i2c1_pins_default>; + clock-frequency = <100000>; +}; + +&serdes_refclk { + status = "okay"; + clock-frequency = <100000000>; +}; + +&dss { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dss_vout0_pins_default>; + assigned-clocks = <&k3_clks 218 2>, + <&k3_clks 218 5>, + <&k3_clks 218 14>, + <&k3_clks 218 18>; + assigned-clock-parents = <&k3_clks 218 3>, + <&k3_clks 218 7>, + <&k3_clks 218 16>, + <&k3_clks 218 22>; +}; + +&serdes_wiz4 { + status = "okay"; +}; + +&serdes4 { + status = "okay"; + serdes4_dp_link: phy@0 { + reg = <0>; + cdns,num-lanes = <4>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_DP>; + resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>, + <&serdes_wiz4 3>, <&serdes_wiz4 4>; + }; +}; + +&mhdp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp0_pins_default>; + phys = <&serdes4_dp_link>; + phy-names = "dpphy"; +}; + +&dss_ports { + #address-cells = <1>; + #size-cells = <0>; + + /* DP */ + port@0 { + reg = <0>; + + dpi0_out: endpoint { + remote-endpoint = <&dp0_in>; + }; + }; + + /* HDMI */ + port@1 { + reg = <1>; + + dpi1_out0: endpoint { + remote-endpoint = <&tfp410_in>; + }; + }; +}; + +&dp0_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dp0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@4 { + reg = <4>; + + dp0_out: endpoint { + remote-endpoint = <&dp0_connector_in>; + }; + }; +};